PROVISION OF LOCKERS FOR STUDENTS INCL ALTERATION TO TARANGINI AT DSSC WELLINGTON

Amount

Taking down chowkhats or frame n.exc 1.5 Sqm each without taking off shutters from frame, and making good surface complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 Sqm but n exc 4 Sqm each without taking off shutters from frame and removing to store complete all as specified and directed.

Taking down Aluminium frame with shutter of any description (without taking off shutters from the frames) not exceeding 1.50 Sqm each complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided as in grill,hold fast, etc complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors,laid bedded and pointed in any mortar complete all as specified and directed.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for drain,sunken floor complete all as specified and directed.

M&L PCC 1:3:6, type C-1 ,using 20 mm graded stone aggregate) as in drain etc , including formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L Precast cement concrete block masonry Type C1, 1:3:6, using 20 mm graded aggregate with solid solid blocks exc 10cm width and setting in mortar 1:6 complete all as specified and as directed.

M&L 15 mm thick rendering in cement mortar 1:6 on brick work or block masonry surfaces of wall , finished even and smooth with out using extra cement complete all as specified and as directed.

M&L 15 mm thick rendering in cement mortar 1:4 on brick work or block masonry surfaces of wall finished even and smooth with using extra cement incl water proofing compound complete all as specified and as directed. Note: WPC shall be measured and paid along with same item.

Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

M&L Reinforced Cement Concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete as specified and as directed.

Use & waste of steel formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. to flat rough finished surfaces of concrete square or rectangle complete as specified and as directed.

S&F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete as specified and as directed.

All as item No 15.00 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete as specified and as directed.

S&F Factory made UPVC white colour fixed glazed ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Note: The unit rate quoted by contractor includes the cost of glass and includes necessary modification of ventelator according to the site requirement such as opening for exaust fan ,louvers etc and all other connected accessories. Net opening will be measured for payment purpose.)

S&F UPVC Partition consisting of 7mm thick white/ coloured solid UPVC ply sheet reinforced with frame work made from 60mm x 60mm Casement frame including necessary drilling,jointing and fill the gap with necessary solvent,and fixing all required cleats,brackets ,channels etc complete all as specifed and directed.

S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L Preparing new surface of steel and applying two coats of synthetic enameled paint over one coat of pink primer complete all as specified and directed.

M&L Aluminium designer powder coated decorative curtain rods (Drapery rods) 20mm dia, exterior grade 3mm thick with and including side caps, holding clamps and 'F' and 'L' brackets, fixed to wall with PVC rawl plug and brass screws etc., complete all as specified and as directed.

M&L 75mm thick cement concrete type D2, 1:4:8 using 40mm graded aggregate as in subbase complete all as specified and directed.

M&L 25mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate as in flooring even and smooth without using extra cement complete all as specified and directed.

M&L Granite of 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick screed bed in CM 1:4 complete all as specified and directed

M&L Heavy duty vitrified unpolished porcelain floor tiles of size 300 x 300mm, 10mm thick laid in floors /skirting etc of pattern as approved, set and jointed with Ezy Grout with spacers of somany to match complete over 15mm thick screed bed/rendering in CM (1:6) suitable for heavy vehicle movement, complete all as specified and as directed. Make: Neo Deccan Natural of somany or Endura of Johnson or equivalent of other Approved makes

M&L Endura Pavement concrete tiles of size 30cmx30cmx10mm thick ,set ,jointed and pointed in neat cement slurry in floors with grey cement and pigments of required colour over 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M&L Applying Bees-Wax polishing over granite stone flooring including removing dust/sweeping complete all as specified and as directed.

M&L Preparation of new surfaces of walls and applying with white putty of average thickness 3mm and making the surface to an even and smooth finish by rubbing with sand paper of different grade etc and applying two coats of Oil bound distermper over a coat of primer by approved applicator of the manufacturer of the paint complete all as specified and as directed.

M&L Complete removal of existing treatment on surfaces of wall and applying with white putty of average thickness 3mm and making the surface to an even and smooth finish by rubbing with sand paper of different grade etc and applying two coats of Oil bound distermper over a coat of primer by approved applicator of the manufacturer of the paint acomplete all as specified and as directed.

M&L for complete removal of existing treatment on surfaces of ceiling and applying with white putty of average thickness 3mm and making the surface to an even and smooth finish by rubbing with sand paper of different grade etc and applying two coats of Oil bound distermper over a coat of primer by approved applicator of the manufacturer of the paint and all as specified and as approved

M&L Preparing newly plastered surfaces of external walls and applying wall putty of 3mm thick for smoothness, one coat of exterior wall primer and two coats of Exterior Emulsion anti fungal weather proof paint complete all as per manufacturer instruction as directed. Make : APEX ULTIMA OF Asian Paint or WEATHER COAT SMOOTH of Berger equivalent of other Approved makes

Complete removal of existing treatment on external walls by wire brushing, crack filling & Bio-wash to fight microbial growth and applying wall putty of 3mm thick for smoothness, one coat of exterior wall primer and two coats of Exterior Emulsion anti fungal weather proof paint complete all as per manufacturer instruction as directed. Make : APEX ULTIMA OF Asian Paint or WEATHER COAT SMOOTH of Berger equivalent of other Approved makes Note : The painting work to be executed by authorised applicator of the manufacturer

M&L Granite work with 20mm thick machine cut, Jet Black granite slab in single piece or two piece length, table rubbed and polished, laid over and including 20mm thick cement screed in cement mortar 1:3, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust and admixture of pigments to match with shade of granite stone as in cooking platforms, microwave platform, WHB counter top in steps, jambs, pillars, window-cills, etc, including cutting, polishing and rounding to edges of stone slabs etc., complete all as specified and as directed.

M&L Providing Gypsum board False ceiling using 12mm thick Gypsum board panels of size as approved by GE, fixed with staples on powder coated standard galvanized iron snap grid frame work of size suitable to fixing Gypsum board using 'T' and angle sections made out of 0.5mm thick PGI sheet, grade of zinc coating 220, bent to shape required as in main member, secondary member, perimeter angle section including provn of G I channel suspender fixed to roof members at the rate of 1200mm c/c and interspaced at 610mm c/c, the main fixing channel shall be fixed through fasteners clips as per manufacturer's instructions with and including plaster of Paris decorative type cornice all around at the junction of wall and ceiling including taking down and refixing of electrical fittings etc complete all as specified and as directed. Note: The unit rate quoted shall be deemed to include the cost of taking down and refixing of the electrical fittings such as ceiling fan, light fittings etc., and keep in safe custody of same till refixing. The unit rate includes taking down of existing false ceiling completely. (ii) The unit rate includes taking down of existing false ceiling of any description completely.

M&L Preparing Gypsum board false ceiling with primer and applying 3 mm thick wall care putty and applying two coat of OBD over one coat of primer complete all as manufacturer instructions complete all as specified and as directed.

M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in padding, coping, Kerb stone ,bed plates, hold fast blocks, etc including formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

Taking down old Steel/wooden lockers of any size or description area not exc 10Sqm each and fixing on the concrete wall surface as dircetd by the Engr incharge including necessary cutting on wall,drilling and fix with appropriate size of bolts including applying two coats of spray paint on steel /wooden surface with Synthetic enamal paint complete all as specified and as directed.

M&L Prelaminated particle board 12mm thick, interior grade, one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

M&L Second class hard-wood clean sawn in scantlings complete all as specified and directed

S&F 18mm thick High Density High Moisture Resistant (HDHMR) Board, both side laminated of approved colour as in shutters, back board, vertical support and horizontal shelves of kitchen/bedroom cupboards fixed with screw to timber framed work etc including dismantling of existing any type of board and complete all as specified and as directed. Note: All exposed edges/surfaces to be finished with same laminated sheet to match with the other surfaces and nothing will be paid extra.

S&F Stainless steel handle of size 100mm for cupboards,lockers etc fixed with screws complete all as specified and directed. MAKE: EBCO/ GODREJ / KAFF / HETTICH

S&F 75mm long Hasp and staple, safety type,brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F Continuous piano hinges, width of flap is 30mm and brass bright finish or electrogalvanised Complete all as specified and directed.

M&L Concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular metal flush boxes of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc. complete all as specified & as directed for the following : Make of cable : Havells/Polycab/Finolex. Make of conduit-Precision/Bajaj plast/Finolex

One Light/fan/Call Bell etc. point controlled by one switch 5/6 Amps complete all as specified and directed.

One switch socket outlet point 5/6 Amps on independent board complete all as specified and directed.

All as per Item No 46.00 above but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete all as specified and directed.

NOTES for Item Nos 46 to 47 1) Modular metal flush boxes shall be measured & paid separately. 2) Cutting chases & making good the disturbed surfaces is deemed to be included in the unit quoted rates.

M&L Surface sub-main wiring alongwith earth wire of size (4 x 6.00) sq. mm + (1 x 6.00) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex. Make of conduit-Precision/Bajaj plast/finolex.

M&L for concealed sub-main wiring alongwith earth wire of size (2 x 4.00) sq. mm + (1 x 4.00) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex Make of conduit-Precision/Bajajplast/finolex. NOTES for item No 48.00 & 49.00 : 1) Two/four runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. 2) Modular metal flush boxes (if req) shall be measured & paid separately. 2) Cutting chases & making good, including necessary Putty work of the disturbed surfaces is deemed to be included in the unit quoted rates.

S&F Modular switch, one way, 6 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXXW061, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S&F Modular switch, one way, 16 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXIW161, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S&F Modular shuttered socket outlet 3 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKSWW063, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S&F Modular shuttered socket outlet 3 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKCWW163, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S&F Concealing modular metal flush box suitable for fixing switches/sockets of 1/2 modules complete all as specified and as directed. Cat No : ACTXMIIX01/02, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S&F Concealing modular metal flush box suitable for fixing switches/sockets of 3 modules complete all as specified and as directed. Cat No : ACTXMIIX03, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S&F Modular cover plate suitable for fixing complete all as specified and as directed. Cat No : ACVPPCWV01/02, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S&F Modular cover plate suitable for fixing switches/sockets of 3 modules complete all as specified and as directed. Cat No : ACVPPCWV03, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor

NOTE for Item Nos 50 to 57 : The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & sockets.

S&F Ceiling rose surface PVC/ Polycarbonate, Isolated body with face Bakelite three terminal complete all as specified and directed. Make: Havells/CG/Anchor

S&F Ultra modern, Surface mounting, 40W, 6500K LED luminaire of size 2' x 2' suitable for ceiling complete with electronic driver & high brightness LED complete all as specified and as directed. Make: LUKER, Cat No: LPS40 or techno-commercially equivalent in Havells/Jaquar by the Engr- in- charge.

S&F Surface and wall mounted LED batten 20 watts 4 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit incl taking down old/unsv fittings complete all as specified and as directed. Make :Havells, Cat No:ENDURALINEARPROBS20WLED865SP CSSIND or techno-commercially equiv In Jaguar/Philips

S&F SPN DB, 8 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection complete all as specified and as directed. Make: L&T, Cat No: DBSPN008DD or techno-commercially equiv in Legrand/Siemens

S&F MCB, TPN, 10KA, 415V, "C" curve, 63 A, ISI marked complete all as specified and as directed. Make : L & T, Cat No : AU10S40633C or techno-commercially equivalent in Siemens/Legrand.

S&F MCB, TPN, 15KA, 415V, "C" curve, 100 A, ISI marked complete all as specified and as directed. Make : L & T, Cat No : AU15S41003C or techno-commercially equivalent in Siemens/Legrand.

S&F MCB, DB, TPN, 06 ways, DOUBLE DOOR, IP-43, Ik-09 with metal door, rated bus bars, earth bar, neutral links complete including blanking plates as required and fixed flush to wall/other surface complete all as specified and as directed. Make : L & T, Cat No : DBTPN006DD or techno-commercially equivalent in Siemens/Legrand.

S&F Miniature circuit Breakers, SPN,C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA complete all as specified and as directed. Make-L&T, Cat No-AU10S20(06-32)3C or techno-commercially equivalent in Legrand/ABB/Siemens.

S&F Miniature circuit Breakers, SP,C-Series 240 Volts of capacity 40 Amps with breaking capacity 10 KA complete all as specified and as directed. Make-L&T, Cat No-AU10S10403C or techno-commercially equivalent in Legrand/ABB/Siemens.

S&F Miniature circuit Breakers, single pole,C-Series 240 Volts of capacity (6-32 Amps) as ordered with breaking capacity 10 KA complete all as specified and as directed. Make-L&T, Cat No-AU10S10(06-32)3C or techno-commercially equivalent in Legrand/ABB/Siemens.

m/s prabakaran

P K ENTERPRISES

SREE PARABRAHMA CONSTRUCTION