Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.7 LAccepted-AOC BANKURA BANKURA WEST BENGAL | BANKURA | WEST BENGAL | 713142 | ₹9.7 L | L1 | Accepted-AOC 1st Lowest |
| 2 | L2₹9.7 LRejected-AOC VILL DALDALI P O LAUDA P S ONDA DIST BANKURA PIN 722136 | BANKURA | BANKURA | WEST BENGAL | 722136 | ₹9.7 L | L2 | Rejected-AOC 2nd Lowest |
| 3 | L3₹9.7 LRejected-AOC | ₹9.7 L | L3 | Rejected-AOC 3rd Lowest |
| 4 | Rejected-Technical | - | - | Rejected-Technical Credential Mismatch |
| 5 | Rejected-Technical VILL ROYNAGAR P O P S DIAMOND HARBOUR DIST SOUTH 24 PARGANAS PIN 743331 | 24 PARAGANAS SOUTH | WEST BENGAL | 743331 | - | - | Rejected-Technical Rejected due to Bank solvency not in format |
Tender Value
₹9.7 L
EMD Value
₹19,410
Closing Date
2 Jan 2026, 4:30 pmClosed
Executive Engineer (A-I) Bankura (A-I) Division
WRIDD Administrative Buildings , Pranabananda Sarani , Kenduadihi , Bankura
Repair and Renovation of Ladies Toilet cum washroom with allied works etc. at WRIDD Administrative Building in Bankura District Under the Executive Engineer(AI), Bankura (A-I) Division under Core-Sector Programme
2025_WRDD_977806_1
WBWRIDD/EE (AI) /BANKURA/e NIT 22/CS / 2025-26
Open Tender
CIVIL WORKS
60 days
Pranabananda Pally, Kenduadihi
Please refer Tender documents.
5 documents required · 5 mandatory
₹19,410
16 Feb 2026
22 Dec 2025
5 Jan 2026
22 Dec 2025
2 Jan 2026
22 Dec 2025
Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m a) In 1st floor including roof.
b) In 2nd floor including roof.
c) In 3rd floor including roof.
Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75m a) In 1st floor including roof. (b) above 150 mm. thick
b) In 2nd floor including roof. (b) above 150 mm. thick
c) In 3rd floor including roof. (b) above 150 mm. thick
a) In 1st floor including roof. (b) upto 150 mm. thick
b) In 2nd floor including roof. (b) upto 150 mm. thick
c) In 3rd floor including roof. (b) upto 150 mm. thick
Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof. a) In 1st floor including roof.
b) In 2nd floor including roof.
c) In 3rd floor including roof.
Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. a) In 1st floor including roof.
b) In 2nd floor including roof.
c) In 3rd floor including roof.
Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. i) For 1st Floor
ii) For 2nd Floor
iii) For 3rd Floor
Ordinary Cement concerete(mix1:1.5:3) with graded stone chips (20 mm nominal size) excluding and reinforcement if any, in ground floor as per relevant IS codes (iv)with local hard black stone variety chips(crusher broken) For ground Floor
i) For 1st Floor
ii) For 2nd Floor
iii) For 3rd Floor
Hire and labour charges for shuttering with centering and necessary staging upto 4m. Using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns lintels curved or straight incliding fitting, fixing and striking out after completion of work (upto roof of ground floor). A)25mm to 30mm thick wodden shuttering as per decision & direction of engineer-in-charge. i) For 1st Floor
ii) For 2nd Floor
iii) For 3rd Floor
Reinforcement for reinforced concrete work in all stors of structures including distribution bars, stirrps ,binders etc initial straightening and removal of loose ruit (if necessary), cutting to requisite length. Hooking and bending to correct shape, placing in proper posting and binding with 16 gauge black annealed wire at every interesection,complete as per drawing and direction. (B) Extra for work beyond the roof of ground floor/initial 4m .i) Tor steel/Mild Steel I. SAIL/ TATA/RINL i) for 1 st Floor
ii) For 2nd Floor
iii) For 3rd Floor
Plaster (to wall floor ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor) (i) with (1:6) cement morter & (c) 15 mm thick plaster (out side plaster) i) for 1 st Floor
ii) For 2nd Floor
iii) For 3rd Floor
Neat cement punning about 1.5 mm. Thick in wall dado, window, sills, floor, drain etc.
(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (ii) Grill weighing above 10 kg/sq.m up to 16 Kg./sq.mtr i) for 1 st Floor
ii) For 2nd Floor
iii) For 3rd Floor
Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria. In ground floor. (i) 32 mm thick
(ii) 25 mm thick
Godrej Hydraulic door closer fitted and fixed complete. (b) Medium type
Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (viii) 100mm. X 75mm. X 3.50mm.
Iron socket bolt of approved quality fitted and fixed complete. (c) 150mm long x 10mm dia bolt.
i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. (a) 250mm long
B) Split shank iron door ring fitted and fixed complete (a) 50mm dia.
Supplying bubble free float glass of approved make and brand conforming to IS: 2835- 1987. i) 4mm thick clear glass.
Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr] (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. (B) Light Colour
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative i) for 1 st Floor
ii) For 2nd Floor
iii) For 3rd Floor
Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns, wall, facia etc. with 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging ,curing and roughening of concrete surface complete. Area of each Granite slab > 0.6 upto 1.0 square metre. [Using cement slurry at back side of granite @ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m] ( 1st, 2nd & 3rd Floor)
Supplying, fitting and fixing PVC pipes of approved make of (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately (a) For Exposed Work (i) for 1st, 2nd & 3rd Floor (A) 15 MM DIA PIPE
(B) 20 MM DIA PIPE
(C) 25 MM DIA PIPE
(D) 32 MM DIA PIPE
Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia (iii) 600 mm long
Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.(iv) 1050 mm long
Supplying, fitting and fixing pillar cock of approved make. b) PTMT Pillar Cock - 15 mm. (Prayag or equivalent).
(ii) Chromium plated Bib Cock with wall flange (Equivalent to Code No. 5047 & Model - Florentine of Jaquar or similar brand).
e) PTMT (Polytetra Bib Cock / Stop Cock (Prayag or equivalent).15mm
(ii) Chromium plated concealed Stop Cock heavy duty (Equivalent to Code No. 5083 & Model - Florentine of Jaquar or similar brand).
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC ( For 1st ,2nd & 3rd Floor ) (b) Two Coats i) Water based interior grade Acrylic Primer
Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. (i) Internal surface (All floors) (b) Two coats (on new works only).
Painting with best quality synthetic enamel paint of approvrd make and brand including smoothening surface by sand papering etc. including using of putty etc.on the surface if necessary (b) on steel or other metal surface(with super gloss/hi gloss) (iv) two coat(with any shade except white) both side.
Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts,nuts etc. (a) With 'P' trap (with vent) For coloured sanitary wares rates will be enhanced over the rates of corresponding items of white glazed sanitary wares as follows: (a) Sky blue, Venetian pink, Min. green, Turquoise, Citrus yellow, Champange, Saphire - by 50 %
Supplying, fitting and fixing shower of approved brand and make. (b) Chromium plated Rose shower with revolving joint and 150 mm long shower arm (Equivalent to Code No. 5489 & Model - Florentine of Jaquar or similar brand).
Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.rate will enhanced over the corresponding item of white Porcelain cistern as follows. (a) Sky blue, Venetian, Min. green, Turquoise, Citrus yellow , Champage, Saphire - By 50%
Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately).
Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. (i) 600 mm long
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (ii) double Socketed 3 Meter Length (b) 110 mm
(vi) Double Socketed 0.9 Meter Length (b) 110 mm
B) Fittings (ii) Plain Tee (b) 110 mm
B) Fittings (v) Plain Y (b) 110 mm
B) Fittings (ix)Bend 45º (b) 110 mm
Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. (ii) 550 mm X 400 mm size
Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. (i) 450 mm X 300 mm
Supplying of approved make exhaust fan heavy duty with mounting frame, blades AC 230-250. 300mm sweep RPM 900 / 1400 (12”)
Supply and fixing of philips Smartbrite Xtra 4ft run length LED Baflen Tube light, incl Fixing only fluorescent light fifling suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10 mt. length. Make : Bajaj, 18 W Neutral White
M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof.I) For structural members of specified sections weighing less than 22.5 Kg./m i) For roof truss works. a) Span up to 12 Mtr
Supplying , fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work). (i) In Roof:-
Add G.S.T @ 18%
Add Labour well fare Cess @1% of Gross Bill Value
Please Enable Macros to View BoQ information
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.32 MB
Tendernotice_2.pdf
PDF • 0.59 MB
BOQ_2382925.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid