Tender ID

DEFPROC

Active

Works

Civil Works

SPL REPAIR / REPLACEMENT OF LT OVER HEAD ACSR CONDUCTOR, RCC POLES, UNDER GROUND CABLE AND LT PANELS AT OTM AND PERIMETER AREA OF MANESAR ARMY CAMP UNDER AGE E/M OF GE (SOUTH), DELHI CANTT-10

E-IN-C BRANCH - MILITARY ENGINEER SERVICES

GE South Delhi Cantt | New Delhi, Delhi | Gurugram, Haryana | South Delhi, Delhi

Amount: ₹46.5 LCloses: 21 Nov 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published31 Oct 2026
Submission Opens14 Nov 2026
Closes21 Nov 2026
Bid Opening23 Nov 2026

Tender Value

₹46.5 L

EMD Value

₹93,000

Closing Date

21 Nov 2026, 6:00 pm

Tender Inviting Organisation

Name

GE South Delhi Cantt-10

Address

GE South Delhi Cantt-10

Work Description

SPL REPAIR / REPLACEMENT OF LT OVER HEAD ACSR CONDUCTOR, RCC POLES, UNDER GROUND CABLE AND LT PANELS AT OTM AND PERIMETER AREA OF MANESAR ARMY CAMP UNDER AGE E/M OF GE (SOUTH), DELHI CANTT-10

Tender Information

Tender ID

2026_MES_796724_1

Reference Number

GE/TOKEN-66/2026-27

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Item Rate

Period of Work

120 days

Location

GE South Delhi Cantt

Source Website

Subscribe to view

Eligibility / Pre-Qualification

As per Tender Documents

Documents Required

11 documents required · 11 mandatory

Fee/PreQual/Technical

RequiredScanned copy of DD for the cost of tender (.pdf)

RequiredScanned copy of application on letter head of firm for issue of tender (.pdf)

RequiredScanned copy of enlistment letter in MES (.pdf)

RequiredScanned copy of provident fund code number (if applicable) (.pdf)

RequiredScanned copy of GST registration number (all pages) (.pdf)

RequiredFor un enlisted firm scan copy of all documents required for enlistment. (.pdf)

RequiredFor un enlisted firm affidavit that no recovery is out standing in any Govt. Deptt. (.pdf)

RequiredResidual work load in hand as on bid submission end date as per NIT No.1 (.pdf)

Finance

RequiredTender Documents (.pdf)

RequiredBoQ duly Quoted (.xls)

RequiredSch of Credit (.pdf)

Fee & Financial Details

Tender Fee Amount

₹500

Tender Fee Payable To

GE South Delhi Cantt

EMD Fee Amount

₹93,000

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

31 Oct 2026

Published

31 Oct 2026

Bid Opening

23 Nov 2026

Download Starts

31 Oct 2026

Download Ends

21 Nov 2026

Submission Starts

14 Nov 2026

Bill of Quantities

Item RateBoQ_Ver4.0INR

BoQ1 (36 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Taking out old unserviceable ACSR conductor of any size from existing poles at various locations of OTM and perimeter of Manesar Army Camp tree distribued area incl aluminium binding wires,jumpering,bindings, insulators cross arms, bracings, supports , clamps and back plate stay wire etc complete all as specified and as directed.	12	Qtl	1.25	₹15
2	Supply laying jointing and testing of XLPE insulated, armoured, heavy duty LT under ground cable 10 sqmm 2 core 1100 Volts grade with aluminium conductor laid in trenches, on poles, through pipes, fixed to walls etc cross sectional area for following sizes complete all as specified and as directed.	150	RM	-	-
3	All as per srl item No 2.00 here-in-before but 16 Sqmm 4 Core.	500	RM	100	₹50,000
4	All as per srl item No 2.00 here-in-before but 25 Sqmm 3.5 Core.	300	RM	53	₹15,900
5	All as per srl item No 2.00 here-in-before but 35 Sqmm 3.5 Core.	200	RM	10	₹2,000
6	All as per srl item No 2.00 here-in-before but 50 Sqmm 3.5 Core.	1,210	RM	11	₹13,310
7	All as per srl item No 2.00 here-in-before but 70 Sqmm 3.5 Core.	900	RM	10	₹9,000
8	All as per srl item No 2.00 here-in-before but 95 Sqmm 3.5 Core.	1,550	RM	22	₹34,100
9	All as per srl item No 2.00 here-in-before but 120 Sqmm 3.5 Core.	100	RM	-	-
10	Supply, install and testing of LT feeder piller panel outdoor type, floor mounted, weather vermin proof factory made, CPRI approved, facricated of 3.15 mm thick CRCA sheet, on frame of mild steel angle iron 40 mm x 40 mm x 6 mm, 45 cms above the ground level duly supported with mild steel angle iron 50 mm x 50 mm x 6 mm thick in PCC foundation (1:2:4), type B-I, using 20 mm graded crushed stone aggregate, LT panel shall be totally enclosed with front double door and rear opening with IP-54 protection as per IS/8623 duly powder coated for 433 volts, 3 phase, 4 wire having TPN Aluminium bus bars suitable for 250 Amps to supply load and 1 Phase + Neutral SPN Aluminium bus bars suitable for 100 Amps to security lights load duly drilled holes for connections, RYB insulated with different colour code and sleeved insulators complete prewired and cable connection with copper conductor wire upto copper bus bars including all incoming and outgoing cable connection with suitable size of copper lugs and cable glands complete all as specified and directed and also comprissing of following:- Incoming:- (i) MCCB 200 A 04 pole - 35 kA 01 Nos, ICS=100%=ICU (ii) MCCB 63 A 04 pole - 25 K 01 Nos, ICS=100%=ICU (iii) Copper bus bar suitable of capacityas per above description. (iv) Digital Voltmeter (v) Digital Ammeter- 01 No (vi) R-Y-B Neon indicator lamp panel mounting type (set of 03 ) = 01 Set (vii) Current Transformer as per suitable capacity (set of 03) (viii) Control wiring of suitable 4/6 sqmm copper wire for connecting above accessories-each job (ix) PCC Work for Panel foundation -Each job	2	Each Job	1	₹2

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.73 MB

Work Item Documents

tenderpagesT66.pdf

Tender Documents • 1.17 MB

BOQ_893645.xls

BOQ • 1.91 MB

SOCT66.pdf

Additional Documents • 0.37 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Taking out old unserviceable ACSR conductor of any size from existing poles at various locations of OTM and perimeter of Manesar Army Camp tree distribued area incl aluminium binding wires,jumpering,bindings, insulators cross arms, bracings, supports , clamps and back plate stay wire etc complete all as specified and as directed.

Qtl

1.25

₹15

Supply laying jointing and testing of XLPE insulated, armoured, heavy duty LT under ground cable 10 sqmm 2 core 1100 Volts grade with aluminium conductor laid in trenches, on poles, through pipes, fixed to walls etc cross sectional area for following sizes complete all as specified and as directed.

150

All as per srl item No 2.00 here-in-before but 16 Sqmm 4 Core.

500

100

₹50,000

All as per srl item No 2.00 here-in-before but 25 Sqmm 3.5 Core.

300

₹15,900

All as per srl item No 2.00 here-in-before but 35 Sqmm 3.5 Core.

200

₹2,000

All as per srl item No 2.00 here-in-before but 50 Sqmm 3.5 Core.

1,210

₹13,310

All as per srl item No 2.00 here-in-before but 70 Sqmm 3.5 Core.

900

₹9,000

All as per srl item No 2.00 here-in-before but 95 Sqmm 3.5 Core.

1,550

₹34,100

All as per srl item No 2.00 here-in-before but 120 Sqmm 3.5 Core.

100

Supply, install and testing of LT feeder piller panel outdoor type, floor mounted, weather vermin proof factory made, CPRI approved, facricated of 3.15 mm thick CRCA sheet, on frame of mild steel angle iron 40 mm x 40 mm x 6 mm, 45 cms above the ground level duly supported with mild steel angle iron 50 mm x 50 mm x 6 mm thick in PCC foundation (1:2:4), type B-I, using 20 mm graded crushed stone aggregate, LT panel shall be totally enclosed with front double door and rear opening with IP-54 protection as per IS/8623 duly powder coated for 433 volts, 3 phase, 4 wire having TPN Aluminium bus bars suitable for 250 Amps to supply load and 1 Phase + Neutral SPN Aluminium bus bars suitable for 100 Amps to security lights load duly drilled holes for connections, RYB insulated with different colour code and sleeved insulators complete prewired and cable connection with copper conductor wire upto copper bus bars including all incoming and outgoing cable connection with suitable size of copper lugs and cable glands complete all as specified and directed and also comprissing of following:- Incoming:- (i) MCCB 200 A 04 pole - 35 kA 01 Nos, ICS=100%=ICU (ii) MCCB 63 A 04 pole - 25 K 01 Nos, ICS=100%=ICU (iii) Copper bus bar suitable of capacityas per above description. (iv) Digital Voltmeter (v) Digital Ammeter- 01 No (vi) R-Y-B Neon indicator lamp panel mounting type (set of 03 ) = 01 Set (vii) Current Transformer as per suitable capacity (set of 03) (viii) Control wiring of suitable 4/6 sqmm copper wire for connecting above accessories-each job (ix) PCC Work for Panel foundation -Each job

Each Job

₹2