SPECIAL REPAIRS TO OTM ACCN BLDG NO P-89 AT GRC AND PROVN OF WATER CONNECTION INCL WATER TANK FOR KITCHEN FOR JCOS / OR MD ACCN AT JN ROAD UNDER GE KAMPTEE

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 (Using old size brick) complete all as specified and directed.

All as per item No 2 above but half brick wall in CM 1:4 complete all as specified and directed.

Dismantling of AC corrugated/ semi corrugated sheet as in roof coverings complete all as specified and directed.

Dismantling Plain, CGI Sheet corrugated of any gauge, thickness including pattern roof coverings complete all as specified and directed.

S&F prepainted 0.50mm thick gavalume aluminium zinc coating GI based corrugated steel coloured sheet having tensile strength of 550 Mpa as in roof covering & on chajjas fixed with self tapping screws all as specified for entire completion of work at any height/position complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in weather boarding/ eaves board in approved design/ pattern/ shape to match with existing adjacent water boarding/ eaves boards inclusive, as in ridges, hips, valley gutters, drip and straight and fixed with self tapping screw etc as per site requirement for entire completion of work at any height/position complete all as specified and directed.

M&L for rolled mild steel sections in rafters, purlins and posts where connected to common rafters and running rails fixed with angle cleats or other connecting plates and nut, bolts or welding etc. confirming to Fe-410 (Gde E-250) complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including dismantling of ceiling fan, tube light, cable and refixing at same place cover fillets complete all as specified and directed.

S&F 5mm thick colour/printed designer PVC wall/ceiling sheet instips and channel feathered at the edges for fixing on solid PVC wall/ceiling lining insulated PVC wall/ ceiling lining and solid PVC partition inclusive of solvent cement and fixing arrangements (suitable fillet, H-joint, U-end, J-edge, External corner and internal corner, horizontally, vertically or at any height and angle) at site, complete all as specified and directed. Note:- PVC wall/ceiling lining should be reversible, waterproof, washable, rib-reinforced, rigid, standard metal.

M&L for providing and fixing powder coated GI snap grid for false ceiling non asbestos board of size 595x595mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel section @ 90grams/sqm, both side inclusive) consisting main ''T'' runner with suitably spaced joints to get required length and of size 24mm x 32-38mm made from 0.25mm thick (minimum) sheet, spaced at 1200mm centre to centre and cross ''T'' of size 24mm x 25mm x 1200mm made of 0.25mm thick (minimum) sheet,1200mm long spaced between main spaced between main ''T'' at 600mm centre to centre to from a grid of 1200x600mm and secondary cross ''T'' of length 600mm and size 24mm x 25mm x 600mm made of 0.25mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.4mm including, required cutting/making, opening for services like diffusers, grills light fittings, fixtures , smoke detectors etc, Main ''T'' runners to be suspended from ceiling using slotted cleats of size 27x37x25x1.0mm fixed to ceiling.4mm GI adjustable rods with galvanised butterfly level clips of size 85x30x0.5mm spaced at 1200mm centre to centre along main T , bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specification complete all as specified and directed. Make:- Everest or equivalent.

M&L for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/ GI/ Aluminium framework fixed in ceiling flat or sloping complete all as specified and directed.

Roughening surfaces of old concrete floor/terrace by picking including taking down existing detoriated / decayed tar felt or any treatment including loose surface, scraping with scraper, chiselling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. and removing the scraped materials debris to a distance complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) as in padding over RCC roof as levelling course complete all as specified and directed.

M&L for rendering 10mm thick in cm 1:4 on brick or concrete surfaces using water proofing liquid compound and finishing surfaces even & fair without using extra cement complete all as specified and directed. Note:- water proofing liquid will be measured and paid separately.

M&L for provision of water proofing treatment by using APP torch on mineral/ slate finished membrane over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane having non woven. polyester film reinforcement with 3mm thick and weight not less than 3.00 kg/sqm and finished on top with mineral/slate finished torch on system laid with 100mm & 150mm over lap on side & end laps respectably complete all as per manufacturers compound complete all as specified and directed. Note:- Water proofing shall be done through authorized applicator.

Supply only liquid water proofing compound ISI marked complete all as specified and directed.

M&L for mild steel work in wind tie/hold fasts or similar small articles conforming to Fe 290 Gde E-165 complete all as specified and directed.

Taking down cement plaster on brick/stone walls etc including raking out joint, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:6 on walls, surface finished even & smooth without using extra cement etc complete all as specified and directed.

M&L for 15mm thick rendering in two layers (first coat 10mm thick in cement mortar 1:6 and second 5mm thick in cement mortar 1:4 on external surfaces of walls & top surfaces of chajja /roof /ceiling mixed with and including liquid water proofing compound as per manufacturers' instructions surface finished fair and even complete all as specified and directed. Note:- Liquid water proofing compound will be measured and paid separately.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15cm thickness and disposal of rubbish outside of MD land complete all as specified and directed.

M&L for excavating over areas, not exc 1.5 m deep and getting out soft and loose soil complete all as specified and directed.

Removing excavated material exc 1.50 Km not exc. 5 Km and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and as directed.

M&L for sand filling under floor or in foundation including watering and consolidation etc complete all as specified and directed.

M&L for hardcore of gauge not exc. 63 mm, deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 100mm thick cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in sub base complete all as specified and directed.

M&L for RCC M-25 design mix as in ground floor (for grade slab) cover slab, landings etc using of graded stone aggregate of suitable size (reinforcement will be measured and paid separately) complete all as specified and directed.

Demolition of reinforced cement concrete in any position not otherwise specifically provided for complete all as specified and directed.

M&L for form work to chullah hoods, chajjas, troughs and similar items including edges fair and rough complete all as specified and directed.

M&L for RCC nominal Mix Type B0 1:2:4 (using 12.5mm graded stone aggregate) as in chajjas, landings, balconies, canopies etc complete all as specified and directed.

M&L for mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for mild steel TMT 6 to 8mm dia cut to lengths bent to shape required including cranking, bending spirally for hooking and binding with MS wire (annealed) not less than 0.9mm dia etc complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection with fair finished complete all as specified and directed. Note:- Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection.

M&L for providing cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) in surface channel & drain including necessary formwork etc complete all as specified and directed.

M&L for 25mm thick PCC type B-0, 1:2:4 (using 12.50 mm graded stone aggregate) as in floor, surface finished even & fair complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L for coloured non skid digital ceramic joint less tiles 8 to 10 mm thick (square/ rectangular) area of each tile exc 0.18 Sqm but not exc. 0.38 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer with CM 1:4 complete all as specified and directed.

M&L for coloured non skid digital ceramic joint less tiles 7 to 10 mm thick (square/ rectangular) area of each tile exc 0.18 Sqm but not exc. 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement for dado/ skirting to match complete all as specified and directed.

M&L for coloured non skid ceramic joint less tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.11 Sqm but not exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer with CM 1:4 complete all as specified and directed.

M&L for coloured/ printed glazed ceramic tiles 300x450x6 to 7mm thick, in floors/ walls skirting/ dado etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick in CM 1:4 complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in laid bedded and pointed in any mortar floors, aprons etc and disposal of rubbish outside of MD land complete all as specified and directed.

S&F granite (of any type) tiles 18-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 18-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over screed bed or bedding layer of mortar 20 mm thick cement mortar 1:3 complete all as specified and directed.

M&L for kota stone slab 15-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over 10mm thick rendering in cement mortar 1:3, on fair faces of brick work or concrete surfaces as backing complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm and not exceeding 4 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.

M&L for second class hardwood plain, solid, straight chowkat and frame wrought framed rebated on the solid rounded chamfered put together with glue pinned at joint complete all as specified and directed.

S&F factory made kiln seasoned chemical treated 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), complete all as specified and directed.

S&F 35mm thick factory made flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides face is covered with both side decorative face veneer with lapping/ frame to match complete all as specified and directed.

S&F 35mm thick factory made 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats or frame etc any numbers of panels complete all as specified and directed.

S&F solid PVC frame of size 50mm x 47mm made out of 5mm wood grain colour PVC sheet reinforced with MS square tube opening as per drawing complete all as specified and directed.

S&F PVC factory made solid PVC moulded door shutter 28 to 30mm thick (stiles) with wood free EPS 2, 4 or 6 raised panel design with 2mm thick Moulded PVC sheet on sheet on the front face & 2mm colour PVC sheet on back face supplying and fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F steel windows with side hung shutters factory made including box type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel ventilator factory made with top hung shutter including hinges steel peg stay with glazing bars, complete all as specified and directed.

S&F steel ventilator factory made with top hung shutter including hinges steel peg stay without glazing bars, complete all as specified and directed.

S&F framed work such as grills, etc with ends of bars shouldered and or reverted or forged into spikes, framed guard bars and similar work conforming to Fe- 290-0 Gde-E-165 complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in a square not exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares not exc 0.50 Sqm each pane complete all as specified and directed.

S&F 100mm long extruded brass, with mild steel hinge pin, bright polished and fixed butt hinges heavy weight and fixed complete all as specified and directed.

S&F 200mm long brass anodised barrel tower bolt (fancy type) and 12mm dia fixed complete all as specified and directed.

S&F 250mm long Brass, sliding door bolt (fancy type) with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S&F 200mm long extruded brass handles (fancy type), fabricated type polished complete all as specified and directed.

S&F mild steel door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300mm long complete all as specified and directed.

S&F floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed.

S&F repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Taking down steel tubing and connections of 15mm bore complete all as specified and directed.

Taking down steel tubing and connections of 20mm bore complete all as specified and directed.

S&F 15mm bore galvanized steel tubes concealed, medium grade with all fittings for water supply pipes, fixed to walls and ceilings or laid in floors cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges and cutting chases for concealed water tubing or concealed etc complete all as specified and directed.

All as per item No 69 above but 20mm bore complete all as specified and directed.

Dismantling of water tanks and removing to store exc. 500 ltrs & not exc. 1000 ltrs complete all as specified and directed.

S&F Rotational moulded (three layers, antibacterial ISI marked) polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity including PVC cover, hoisted and fixed in position including connection up pipes as specified in SSR Part I complete all as specified and directed.

S&F in repair 20mm PTMT float valve, high pressure with Polythene float and fly nut, screwed for Iron pipe etc complete all as specified and directed.

S&F in repair gun metal gate valve of 15mm dia with iron wheel screwed both for iron pipe complete all as specified and directed.

S&F in repair gun metal gate valve of 20mm dia with iron wheel screwed both for iron pipe complete all as specified and directed.

S&F in repair 15mm bore bib tap fancy type chromium plated long body cast copper alloy screwed down for iron pipes or for brass ferrule complete all as specified and directed.

S&F in repair 15mm bore angle stop valve fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair 15mm bore concealed stop valves fancy type chromium plated cast copper alloy pressure with crutch or butter fly handles screwed both ends with long shank and cup (concealed type) for iron pipe or for union complete all as specified and directed.

S&F in repairs Vitreous china W.H.B. white flat back of size 550 x 400mm, including pvc waste pipe, and brackets or wall hung fixed with bolts etc complete all as specified and directed.

S&F in repair 15mm bore pillar taps swan neck cast copper alloy fancy type chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed.

S&F in repair chromium plated shower rose fancy type fixed to 15mm bore pipe complete all as specified and directed.

S&F in repairs Soap dish, CP 125mm size fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair tubular towel rail, 20mm dia, D type, 60cm long between flanges chromium plated complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F vitreous china squatting pan 'Orissa' pattern, size 580x440mm white, with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and directed.

S&F in repair EWC vitreous china wash down water closet (pedestal pattern) white with integral foot rests with 'P' or 'S' trap including provn of lime concrete or bedding complete all as specified and directed.

S&F Plastic water closet seat white, closed pattern with flat bottom and cover and mild steel C.P or aluminium hinging device complete all as specified and directed.

S&F Health faucet CP with flexible tube and wall hook complete all as specified and directed.

S&F in repair PVC low level flushing cistern (dual flush) white slim line 10 ltrs capacity including PVC bend pipe, handle and float valve, brackets etc complete all as specified and directed.

S&F for Vitreous china Urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F waste coupling chromium plated size 32mm with long thread complete all as specified and directed.

S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gms) complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm long suitable for 15mm bore GI pipe complete all as specified and directed.

S&F in repair stainless steel drapary curtain roads 25mm bore with brackets/ holders etc cut to length as required complete all as specified and directed.

Taking down eves gutter, gas pipe, sewage pipe and rain water pipes (any size or pattern), including all fittings, head shoes, bends, swan-necks etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings the accessories) complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or trenches 110 mm bore complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or trenches 75mm bore complete all as specified and directed.

S&F PVC (SWR) bend, ISI marked, any radius of 110mm bore complete all as specified and directed.

S&F PVC (SWR) bend, ISI marked, any radius of 110mm bore complete all as specified and directed.

S&F cast iron floor trap with grating 100mm dia including jointing to waste pipe fixed in PCC type B-I, 1:2:4 etc complete all as specified and directed.

S&F PVC (SWR) junction single, (double T) equal or un equal of 110mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) branch piece 110mm bore, single (single Y) equal or unequal complete all as specified and directed.

S&F PVC (SWR) vent cowl ISI marked 110mm bore complete all as specified and directed.

S&F cast iron Nahani trap with grating 100mm dia including jointing to waste pipe fixed in PCC type B-I, 1:2:4 etc complete all as specified and directed.

Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3, complete all as specified and directed.

M&L for Bitumastic gola, with 80/25 bitumen and coarse sand mixture, 1:3 by weight, 8cm x 8cm at the junction of roofing to vertical surfaces complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and directed.

S&F angle iron frame work for placing of sheet/ desert cooler etc including flat iron and all necessary drilling, welding, bolting or riveting, embedding in concrete etc. and similar work and fixing to the required location and position including shape and size conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings complete all as specified and directed.

M&L for providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings complete all as specified and directed.

S&F brass mortise lock (4 levers), vertical type, size 100mm long including all fitting arrangements complete all as specified and directed.

S&F heavy duty double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel complete all specified and directed.

S&F for sheet glass 5.50mm thick tinted quality and glazing exc 0.50 sqm in each panel complete all as specified and directed.

S&F pre-laminated particle board 12mm thick exterior grade pre laminate both sides with decorative choice lamination fixed with necessary aluminium beading complete all as specified and directed.

S&F for green/white marble 18-20 mm thick machine cut as in riser, dado platform etc set and jointed in white cement slurry over 10mm thick rendering in cement mortar (1:3) and pointed in white cement including cutting, polishing (mirror type)or use in shelf and cupboard etc complete all as specified and directed.

M&L for 15mm thick screed bed or bedding of cement plaster 1:4 with water proofing compound for sunken floor treatment finishing even and smooth without using extra cement complete all as specified and directed. (Note:- WPC will be paid separately).

M&L for applying evenly a tack coat of epoxy primer including cleaning surfaces complete all as specified and directed.

M&L for cement concrete type F2 1:2:4 (using 20mm graded aggregate) as in sunken floor complete all as specified and directed.

M&L for preparation new plaster surfaces and applying two or more coats of distemper with 1st quality acrylic distemper (ready mixed) dust proof having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of putty surface of walls/ceilings etc.complete, as per manufacturer's specification complete all as specified and directed.

M&L for complete removal of existing treatment of wall/ ceiling and applying two or more coats of distemper with 1st quality acrylic distemper (ready mixed) dust proof having VOC content less than 50gms/ litre, of approved manufacturer, of required shade and colour over a coat of putty surface of walls/ceilings etc. complete, as per manufacturer's specification complete all as specified and directed.

M&L for complete removal of existing treatment of wall/ceiling and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. Note:- Material shall be applied as per manufacturer's instructions.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. Note:- Material shall be applied as per manufacturer's instructions.

M&L for two coats of synthetic enamel paint over new wooden surfaces of any description not otherwise described over 10cm in width or girth over one coat of pink primer including preparation of surfaces complete all as specified and directed.

M&L for one coat of synthetic enamel paint over old painted wooden surfaces of any description over 10 cm in width or girth including preparation or surfaces complete all as specified and directed.

M&L for two coats of synthetic enamel painting over a coat of red oxide primer including preparation of new steel surface over 10 cm width or girth complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for machine pressed precast concrete Interlocking paver block glosy finish in grey cement with pigment confirming to IS 15658-2006 of 60mm thickness M-40 Grade, of size shape colour and pattern as directed laid dry complete all as specified and directed.

S&F 150mm UPVC Pipes (SCH-40) complete all as specified and directed.

M&L for cement concrete 1:3:6 type C1 (using 20mm graded aggregate) as in coping complete all as specified and directed.

M&L for chequered cement concrete tiles colour glessy finished rubber pressed 30cm x 30cm x 25mm thick set jointed and pointed in neat cement slurry and pointed in coloured pigment over 20mm cement screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for precast stone kerb of rubber moulded coloured glossy finished precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate, block of size 30cm wide & 15cm thick finished at top bullnosed shape and finished surface even and smooth using coloured pigment and jointed in CM 1:6 struck finished complete all as specified and directed.

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc and getting out in hard/dense soil complete all as specified and directed.

M&L for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) in sub base, filling and mass concrete complete all as specified and directed.

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landing horizontal or slopping similar work not. exc 200mm thick, and flat fair finished surfaces complete all as specified and directed.

M&L for RCC nominal Mix 1:2:4 (using 20mm graded stone aggregate) for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, chajja and in shelves and the likes complete all as specified and directed.

M&L for 75mm thick cement concrete1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection and surfaces finished even and smooth without using extra cement including mist filling in the joints complete all as specified and directed.

M&L for forming construction joints 30mm deep x 10mm wide filled with sealing compound Grade 'A' complete all as specified and directed.

Removing excavated material not exc 50m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm in hard / dense soil complete all as specified and directed.

S&F Rotational moulded (three layers, antibacterial ISI marked) polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity including PVC cover, hoisted and fixed in position including connection up pipes as specified in SSR Part I complete all as specified and directed.

Disconnecting existing water tanks of capacity exc. 250 ltrs & not exc. 500 ltrs, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position including cleaning and removing all the scale and dirt etc from the tank and from mouths of circulating pipes etc complete all as specified and directed.

S&F 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum weight 20 mm - 210 gms) complete all as specified and directed.

S&F 15mm bore bib tap fancy type chromium plated long body cast copper alloy screwed down for iron pipes or for brass ferrule complete all as specified and directed.

S&F gate valve of 15mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

S&F gate valve of 20mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.

Taking down point wiring with aluminium conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to macth with existing surfaces including white washing/colour washing/ distempering to match with existing wall/ floor/ ceiling finishes complete all as specified and as directed.

Taking down sheet metal enclosure, DB, main switch etc and making good distrubed sufaces to match with exisiting surfaces complete all as specified and as directed.

Taking down sub main wiring of any size/ capacity and making good disturbed sufaces to match with the existing surfaces complete all as specified and as directed.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm modular boxes sunk on wall for mounting of any type modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch. Note:- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

All as per item No 152 above but One ceiling/exhaust fan point controlled by oneway switch and regulator complete all as specified and as directed.

All as per item No 152 above but One 3 pin 5 amp socket outlet point on the same board with other switches complete all as specified and as directed.

All as per item No 152 above but One 3 pin 5 amps socket out let point on independent board complete all as specified and as directed.

All as per item No 152 above but one bell / buzzer point controlled by one bell push complete all as specified and as directed.

All as per item No 152 above but wiring with 4 sqmm multi stranded cable and earth wire with copper conductor of size 4 sqmm for 15 amps power point complete all as specified and as directed.

All as per item No 152 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and as directed.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of size 2 x 4.0 Sqmm with earth wire of 1x 6.0 Sqmm complete all as specified and as directed. Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make.

All as per item No 159 above but of size 2x 6.0 Sqmm with earth wire of 1x 6.0 Sqmm complete all as specified and as directed.

S&F ceiling rose surface type 2/3 terminals 5 amps complete all as specified and as directed.

S&F bell ding dong, AC 230 Volts single phase complete all as specified and as directed.

S&F modular switch one way 6A, 1 module complete all as specified and as directed.

S&F modular bell push 6A, 1 module complete all as specified and as directed.

S&F modular socket 6A, 2/3 pin, 1 module complete all as specified and as directed.

S&F modular fan step regulator, 120 watt, 2 module complete all as specified and as directed.

S&F modular switch one way 16A, 1 module complete all as specified and as directed.

S&F modular socket 6A/16A, 2/3 pin combined, 2 module complete all as specified and as directed.

Replacement of worn out MS AC plug box with modular plate power unit four module, 20 amps starter, 25 Amps socket, 25 Amps plug complete all as specified and as directed.

S&F highly durable surface mounted 18/20 watt LED batten/ surface constructed of fire retardant engineering grade extruded plastic and decorative end cap complete with tube rod, driver including 3 core 1 sqmm copper conductor cable for connection and accessories complete all as specified and as directed. Make:- CG LCTLN-2--CDL / Bajaj BLTRU 20W NW VIVA / Philips BN 150W LED 20S-6500 PSE OD GR

S&F light fitting 9W bulk head luminaires with lamp holders etc complete with all accessories and including connecting up with twin core twisted flexible cable of suitable size of 230V, 50Hz complete all as specified and as directed. Make:- CG LBHP-10-CDL / Philips / Wipro

S&F energy efficient surface mounted 2'x2' grid ceiling LED fitting 36/40 W rated voltage 240V, 50 Hz combination with profiled and flat diffuse complete all as specified and as directed. Make:- CG LCTLRF6-36-CDL / Philips / Wipro

S&F LED 36W suspended from ceiling including transparent suspension wires, bracket etc and connecting 3 core cable 240V, 50Hz complete all as specified and as directed. Make:- CG LCTLN-54-36-CDL / Philips / Wipro

S&F LED building security light 25 W with lumen output 1800 with driver with rated voltage 240V, 50Hz including mounting GI (made out of 25mm dia light grade pipe 0.8m bent to shape) including FI clamps, nut bolts complete all as specified and directed. Make:- CG Cat No LSTS-25-CDL-M or in Philips/ Wipro.

S&F sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting, double door complete all as specified and as directed.

S&F MCB single pole 240 V, 6 to 40 amps 10 KA breaking capacity, 'C' series complete all as specified and as directed.

S&F MCB single pole and neutral 240 V, 6 to 40 amps 10 KA breaking capacity, 'C' series complete all as specified and as directed.

S&F MCB triple pole and neutral 415 V, 40 to 60 amps 10 KA breaking capacity complete all as specified and as directed.

S&F exhaust fan single phase, 200/230mm sweep, metallic with bolts, nuts, washers and connected electrically complete all as specified and as directed.

M&L for earthing complete with galvanised steet earth plate electrode 600 x 600 x 6mm thick burried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr below the normal ground level connected to galvanised earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanised iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for:- (a) Excavation and earth work or drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 type B-1. (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric. (d) Funnel with watering pipe of GI 20mm nominal bore light grade and copper lugs etc all as specified. (e) 15mm nominal bore meduim grade GI protection pipe 7.50 metre long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt. (g) Connection to earthing test point and testing on completion.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.76,188.00]

M/s Rana Construction

Meet Road Lines

Devika Constructions

DEESHA CONSTRUCTIONS

Bidder Name

Meet Road Lines

M/s Shrangi Rishi Construction

DEESHA CONSTRUCTIONS

Devika Constructions

M/s Rana Construction