Improvement/Re-Carpeting of Cantt Fund Road

Preparing surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. (Black top surfaces)

Applying evenly a priming/tack coat with bituminous primer at 7 kg per 10 sq metre

M&L- Bituminous premixed carpet, 25 mm consolidated thickness, with 0.3375 cu.m. of stone chippings mixed with 18.25 kg of binder, rolled and compacted to required camber and gradient

M&L- Bituminous premixed carpet, 40 mm consolidated thickness, with 0.54 cu.m. of stone chippings mixed with 29.2 kg of binder, rolled and compacted to required camber and gradient

M&L- Premixed sand seal coat with 0.06 cu.m. of sand mixed with 6.8 kg of bitumen, applied and rolled to a uniform smooth surface

M&L- Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less)

M&L- 10cm thick (compacted thickness) WBM with coarse aggregates of grading 1 (90 to 40mm size), spread, rolled and consolidated to gradient and camber.

M&L:- Continuous brick edging on ends vertically using Sub-class 'B' brick.

Scarifying or picking gravelled,macadam or bituminous macadam surfaces

Surface dressing by spraying evenly paving bitumen at 20 Kg per 10 sq mts., binding with 12.5mm stone chippings @ 0.14 cu.m per 10 sq.m and rolling to required gradient and camber.

S K Construction Co.