Construction of model football stadium at Belsiagarh,Block -Rania,District - Khunti.

Amount

Earth work in excaviation in foundation trenches in ordinary soil (vide classification of soil item A) & disposal of excaviated earth as ovrained to a distance upto 50 m including all lifts, levelling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approve design, building specification & direction of E/ incharge(5.1.1)

Extra for earth work in hard soil as per specification and direction of engineer incharge(vide classification of item B)(5.1.2)

Earth work in filling in sub floor trenches and plinth in layersnot exceeding 150 mm thick, well watered, rammed, fully conpared and fine dressed with earth obtained after cutting within lead of 50m and lift of 1.5m all completed as per direction of the E/I( mode of measurement compacted volume).(5.1.7)

Earth work in filling in sub floor trenches and plinth in layersnot exceeding 150 mm thick, well watered, rammed, fully conpared and fine dressed with earth obtained after cutting within lead of 50m and lift of 1.5m all completed as per direction of the E/I( mode of measurement compacted volume).(5.1.8)

Providing coarse clean sand in filling in foundation trecches or in plinth including rammingamd watering in layers not exceeding 150mm. Thick with all leads and lifrs including cost of all materials, labours, royality and taxes all complete jobs as per building specification and direction of the E/I . ( mode of measurement compacted volume) ( 5.1.10)

Providing degination 75B one brick flat soiling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of the E/I.(5.6.3)

Providing and laying in position cement concrete of soecified grade excluding the cost the cost of centering and shuttering all work up to plinth level(1:3:6) (1: cement : 3 coarse sand : 6 graded stone aggregate)(5.3.1.5)

Providing and laying in position cement concrete of soecified grade excluding the cost the cost of centering and shuttering all work up to plinth level(1:4:8) (1: cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)(5.3.1.6)

Providing and laying in position cement concrete of soecified grade excluding the cost the cost of centering and shuttering all work up to plinth level(1:2:4) (1: cement : 2 coarse sand : 4 graded stone aggregate)(5.3.1.3)

Providing and laying in position reinforced cement concrete of soecified grade excluding the cost the cost of centering and shuttering all work up to plinth level(1:1.5:3)M20 (1: cement : 1.5 coarse sand : 3 graded stone aggregate)(5.3.9.1)

Providing cement concrete works in walls including attached pilasters butteress plinth and string courses fillets columns pillars piers abutment post and struts etc. above plinth level upto floor five level rxcluding cost of centering shuttering finishing and reinforcement: (1:1.5:3) M20 (1: cement : 1.5 coarse sand : 3 graded stone aggregate)(5.3.10)

Providing reinforcement concrete work in beam suspended floors roofs having slope upto 15 degree landing balcony shelves above plinth level upto floor five level rxcluding cost of centering shuttering finishing and reinforcement: (1:1.5:3) M20 (1: cement : 1.5 coarse sand : 3 graded stone aggregate)(5.3.11)

Providing Tor steelreinforcement 8 mm dia. Bars as per approved design & drawing.(5.5.4)

Providing Tor steelreinforcement of 10 mm dia bar as per approved design & drawing.(5.5.5(a))

Providing Tor steelreinforcement of 12 mm dia to 20 mm dia bar as per approved design & drawing.(5.5.5(b))

Centering including struting , proping etc and removal form for(5.3.17)

Foundation footing bases for column etc.(5.3.17.1)

Column, piers ,Pillars etc(5.3.17.6)

Lintel beams ,plinthbeam etc.(5.3.17.5)

Suspended floors ,roof, landing balconies etc.(5.3.17.3(v))

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding,top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.(DSR 10.18)

Providing desination 75B brick work in cement mortar (1:6) in foundaton & plinth with approved quality of clean coarse sand of F.M 2 including providing 10mm th.mortar joints cost of screning materials, racking out joints to 15mm depth, curing, taxes and royalty all complete as per build specification and direction of E/Incharge.(5.2.6)

Providing and laying damp-proof course 50mm thick with cement concrete M 150 with nominal mix1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm to 6 mm nominal size )all complete as per build . specification and direction of E/I in charge..(5.3.5)

Providing desination 75B brick work in cement mortar (1:6) in foundaton & plinth with approved quality of clean coarse sand of F.M 2 including providing 10mm th.mortar joints cost of screning materials, racking out joints to 15mm depth, curing, taxes and royalty all complete as per build specification and direction of E/Incharge.(5.2.14)

Providing desination 125 mm thick reinforced designation 75A brick work in cement mortar (1:4) in super structure with approved quality of clean coarse sand of F.M 2 including providing 10mm th.mortar joints cost of screening materials, racking out joints cost of screening materials, racking out joints to 15mm depth, curing, taxes and royality all complete as per build . specification and direction of E/ in charge.(5.2.23)

Providing 6mm, cement plasters (1:4) in ceiling with clean coarse sand of F.M 1.5 including cost of carriage, screening , curing with all lead and lifts of water, scaffolding taxes and royalty all complete as per buiding specifications and diarection of the E/I.(5.7.6)

Providing 12mm. Cement plaster (1:6)l with clean coarse sand of F.M .15. including cost of carriage, screening, curing with all lead and lifts of water,scaffolding, taxes and royalty all complete as per building specifications and direction of the E/I. (5.7.3)

Providing two coats of Oil bound distempring of approved shade and make over a coat of cement primer over new surface do…do… as per E/I.(5.8.18)

Finishing wall with Premium Acrylic smooth exterior paint of required shadeNew work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)(DSR 13.47.1)

Providing and laying Double charge vitrified floor tiles in different sizes (thickness to be specified by the manufacture) with water absorption less than 0.08% and conforming to IS: 15622/ ISO 13006, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. complete Size of Tile 600 x 600 mm(5.6.28)

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick(DSR 11.26.1)

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.(DSR 11.27)

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.complete.(DSR 11.37)

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I. With commercial grade colour Tiles.(5.6.23.4)

Supplying,fitting and fitting good quality,well dressed and well seasoned sal wood work in chaukhat in doors,windows --do-- all complete as per building specification and direction of E/I.(5.4.1)

Supplying,fitting and fitting 30 mm solid core type non-decorative single leaf flush shutters in doors and windows --do-- all complete as per building specification and direction of E/I.(5.4.40)

Supplying,fitting and fitting 35 mm solid core type non-decorative single leaf flush shutters in doors and windows --do-- all complete as per building specification and direction of E/I.(5.4.39)

Supplying , fitting and fixing M.S grill made of 20 X 6mm. M.S flat/ square bars as per approved design & drawing, properly fibricated with joints contiuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (5.5.12)

Supplying fitting and fixing collapsibble gate of approved size nad make properly fabricated with vertical double channels 20x10x2 mm at 100 mm centres and braced with 100 mm centres do…do… as per E/I.(5.5.14)

Providing two coats of painting with synthetic enamel paint with one coat of primer of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.(5.5.45)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)(DSR 21.1.1.2)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron)(DSR 21.1.2.2)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)(DSR 21.3.1)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes : 110 mm dia.. (DSR 12.41.2)

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend (DSR 12.42.5.2)

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (plain) 110 mm shoe (DSR 12.42.6.2)

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete.110 mm (DSR 12.43.2)

Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 125 mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. (5.10.33)

Making plith protection 50 mm thick of cement concrete 1:3:6 over 75 mm thick bed of dry brick blast do.. Do as per E/I.(5.3.8)

Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. 'p' trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware footrest to be fixed in floor 15mm C.I. body brass spindle stop cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and dirction of E/I. 580mm long - With 10 liter low level PVC cistern(3.2.1 (A)(C ))

Supplying and fixing 40 mm high white vitreous glazed (European type W.C. pan) with p trap seat and lid, 15 litre low level white P.V.C. flushing cistern with manually controlled devicde (handle lever), conforming to IS:7231, parryware/Hindware/with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. (b) with 10 litre Pvc citern (3.2.2)

Supplying fitting and fixing flat back or angular,lipped front vitreous white glazed earthen ware Urinal of Hindustan,Parry or any other I.S.S. approved make -----direction of E/I. Flat Back or standing Corner(600mmX350mm) (3.2.3)

Providing and fixing C.P. brass bib cock of approved conforming to IS 8931 : 15 mm nominal bore(DSR 18.49.1)

Providing and fixing C.P. brass long body bib cock of approved conforming to standard and weight not less than 690 gms : 15 mm nominal bore(DSR 18.51.1)

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.(DSR 18.65)

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 :15mm nominal bore(DSR 18.53.1)

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 15 mm nominal bore, weighing not less than 32 gms(DSR 18.75.1)

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Circular shape 450 mm dia(DSR 17.32.1)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap(DSR 17.7.2)

Providing and fixing PTMT grating of approved quality and colour. 125 mm nominal dia with 25 mm waste hole.(DSR 18.58.1.2)

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length(DSR 18.74.2)

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length(DSR 17.28.2.1)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.(DSR 18.8)

15 mm dia.(18.8.1)

20 mm dia.(18.8.2)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittingswith one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work(DSR 18.9)

25 mm dia.(18.9.3)

32 mm dia.(18.9.4)

40 mm dia.(18.9.5)

Supplying all materials with labour for the construction of inspection chamber(600x450mm) with designation 75 B brick --do--all comp.(3.3.3)

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore(DSR 18.52.1)

Polythene water storage tank of ISI mark(eg. Syntex/sinter/himgiri/gangotri) with cover and locking system(M-079)

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fitting arangement of approved quality colour and makeweighing not less than 88 gms. (3.1.21 C(i))

Providing and fixing c.p. towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fitting arangement of approved quality colour and makeweighing not less than 88 gms. (DSR 17.72)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making goodthe walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 178 mm(DSR 17.10.1.4)

Providing and fixing PTMT swivelling shower, 15 mm nominal bore,weighing not less than 40 gms(DSR 18.64)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes.75 mm diameter(DSR 12.41.1)

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.(DSR 12.42)

12.42.1.1 75 mm Coupler()

12.42.1.2 110 mm Coupler()

12.42.2.1 75 mm single pushfit Coupler()

12.42.2.2 110 mm single pushfit Coupler()

12.42.3.1 110 mm single tee with door()

12.42.3.2 75 mm single tee with door()

12.42.4.1 75 mm single tee without door()

12.42.4.2 110 mm single tee without door()

12.42.5.1 75 mm bend 87.50()

12.42.5.2 110 mm bend 87.50()

12.42.6.1 75 mm shoe(plain)()

12.42.6.2 110 mm shoe(plain)()

Extra for each subsequent lead upto 25 m beyond the initial lead of 50 m(maximum upto 150 m lead by head load) as per specification and direction of E/I.(5.1.9)

Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment)(HOR 2.2)

Supply at site of work well decayed farm yard manure, from any available source, approved by the engineer in charge including screening and stacking(RCD 11.11)

Mixing earth and sludge or manure in the required proportion specified or directed by the officer-in-charge.(HOR 2.9)

Spreading of sludge farm yard manure or/ and good earth in required thickness (cost of sludge, farm yard manure or/and good earth to be paid for separately)(RCD 11.1 )

Grassing with 'Doobs' grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed(RCD 11.2)

Making lawns including ploughing and breaking of clod,removal of rubbish, dressing and supplying doobs grass roots and planting at 15 cm apart, including supplying and spreading of farm yard manure at rate of 0.18 cum per 100 sqm(RCD 11.3)

Turfing lawns with fine grassing including ploughing, dressing including breaking of clods, removal of rubbish, dressing and supplying doobs grass roots at 10 cm apart, including supplying and spreading of farm yard manure at rate of 0.6cum per 100 sqm(RCD 11.5)

Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction.(RCD 3.19)

Preparation and surface treatment of formation by removing mud and slurry, watering to the extent needed to maintain the desired moisture content, trimming to the required line,grade, profile and rolling with 8-10 tonne smooth wheeled roller, complete as per clause 310.(RCD 3.30)

Providing designation 100 A brick work with fly Ash lime brick (FLAG) confirming to IS 12894-1990 in C.M. (1:6) in super structure --do-- all comp. as per specification and direction of E/I.(5.2.52)

Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I.(5.8.24)

Cost of drilling 200mmX165mmX125 Mtr deep bore well in all kinds of soil and rock in rural area for installation of pump bore set with Hydraulic DTH Rig machine, all complete including supplying all materials, tools, drilling rig, Air Compressor and equipments, as well as fuel, lubricants and cost of transportation of Rig machine and other vehicles up to the site. (M-1035)

(a) 0.00 m upto 50.00 m depth below GL. ()

(b) From 50.00 m to 125 m depth()

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia(DSR 23.3.3)

Development of tube well in accordance with IS :2800(part-1) to establish maximum rate do…do.. As per E/I.(DSR 23.12)

Supplying and fitting MS Cap over 200 mm dia casing pipe all complete job as per direction of E/I(DSR 23.13.3)

Supplying and fitting MS clamp of required dia. To the top of casing/housing pipe of tubewell as per IS:2800 (part-1) all complete job as per direction of E/I(DSR 23.14.3)

Supplying 100 mm dia. Submersible pump sets confirming to IS 8034 and motor confirming to IS 9283.Pump set 100 mm dia (with polypropelene/noryl impeller) upto 20 stages 2 HP(M-1055)

FR PVC Insulated 3 core 4 sqmm pvc insulated copper wire(M-1627)

15 L&T 2 HP starters control panel for submersible pump(GEM)

S/F/F lowering 40mm dia G.I. column pipe do..do.. As per direction ofE/I.(M-930(k))

Providing P.C.C. M-15 with nominal mix of (1:2:4) in Foundation with approved quality of stone metal grade III (53 to 22.4 mm size) and clean coarse sand of F.M. 2.5 to 3 including screening, , mixing cement concrete in mixture, placing in position, vibration, striking, curing, taxes and royalty all complete as per building specification & direction of E/I.(5.3.1.2)

Providing 12mm cement plaster(1:3) with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I (5.7.1)

Providing 1.5 mm cement punning -- all complete as per specification and direction of E/I. (5.7.11)

Supplying and fixing C.I. cover without frame for manholes : 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg(DSR 19.18.2)

Constructing soak pit 1.20x1.20x1.20 m filled with brick bats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.(DSR 19.33)

Carraige of materilas:-()

(a) Bricks ()

(b) sand ()

(c )stone chips ()

(d) metal ()

(e) Fly Ash Bricks ()

Point wiring in PVC conduit with piano type switch Wiring for light point /call bell point / exhaust fan point with 1.5 sqmmFRPVC insulated coper conductor single core cable in surface / recessed PVC conduit with paino type switch phenolic laminated sheet with suitable size of Msbox and erthing the point with 1.5 sq mm FRPVC insulated copper conductore single core cable etc as required . Gr-A(1.3)

Supplying and fixing suitable size G.I/PVC box on surface or in recess with phenolic laminated sheet cover in front including providing and fixing 5pin.5/6 amps socket outlet and 5/6 amps piano type switch connection,painting etc. as required.(1.31)

Supplying and fixing suitable size G.I/PVC box on surface or in recess with phenolic laminated sheet cover in front including providing and fixing 6pin.15/16 amps socket outlet and 15/16 amps piano type switch connection,painting etc. as required.(1.32)

power plug Wiring in pvc conduit 2x4 sq mm wiring for light /power plug with 2x4 sq mm frpvc insulated copper conductor single core cable for loop earthing as required.(1.5)

Wiring for circuit /submain wiring alongwith earth wire with the follwing sizes of FRPVC Insulated copper conductor single core cable.(1.7)

2x1.5 sqmm +1x1.5 sqmm earth wire.(1.7.1)

2x2.5 sqmm +1x2.5 sqmm earthwire.(1.7.2)

2x10 sqmm+1x10 sqmm earthwire.(1.7.5)

4x6.0 sqmm +2x6 sqmm earthwire(1.7.10)

Wiring in existing conduit -supplying and drawing following sizes of FR PVC insulated copper conductor,single core cable in existing surface/recessed steel/PVC conduit as required. 2x4 sqmm(1.15.20)

Supplying and fixing following rating four pole 415 volts,isolator in the existing MCB DB complete with connections,testing and commisioning as required.(2.15)

Supplying and fixing following ways horizontal type three pole neutral sheet steel MCB distribution board 240 volts do…do… as per E/I. 8 way,double door(2.8.8)

following ways horizontal type three pole neutral sheet steel MCB distribution board 415 v do…do… as per E/I.(2.9)

4 way (4+12)double door horizontal type.(2.9.4)

6 way (4+18)double door horizontal type.(2.9.5)

S/F 'c' series MCB-supplying and fixing following 240 volts 'c' series miniature circuit breaker suitable for indictive loads 0f following poles in the existing MCB DB complete with connections,testing and commisioning as required.(2.12)

6/32 amps single pole(2.12.1)

40 amps TPN (2.12.9)

40 amps DP(2.12.6)

50/63 amps DP(2.12.7)

Supplying and fixing 2 pin 5 amp ceilling rose on the existing junction box /wooden block including connection etc. as required.(1.33)

SITC Fluorescent fitting directly on surface -Installation,testing and commissioning of pre wired,fluorescent fitting/compact fluorescent fitting of all types,complete with all accessories and tube etc. directly on ceiling /wall including connection with 1.5 sqmm FR PVC insulated copper conduit(1.41)

SITC Fluorescent fitting with down rods -Installation,testing and commissioning of pre wired,fluorescent fitting/compact fluorescent fitting of all types,complete with all accessories and tube etc. connection with 2 no. down rods 0f 20 mm dia.(1.42)

Suppling and fixing following piano type switch / socket on the existing switch box / cover including connection etc. as reqd.(1.23)

5/6 amps oneway switch (1.23.1)

3 pin 5/6 amps socket outlet(1.23.4)

Electronic step fan regulator(1.23.9)

Supplying and fixing suitable size G.I/PVC box on surface or in recess with suitable size phenolic laminated sheet cover including painting etc. as required. 75mmx75mmx50mm deep (4"x4")(1.22.1)

Installation of exhaust fan upto 450mm sweep in existing opening including making the hole to suit the size of the above fan connections,testing and commisioning as required.(1.48)

S/F of following sizes of PVC conduit alongwith the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required . 20 mm PVC coduit.(1.21.1)

S/F4brass batten angle holder including connection etc.(1.34)

Earthing with Copper earth plate 600mmx600mm x3mm thick including accessories and providing masonary encloser with cover plate having locking arrangement and watering pipes etc. as required.(but with charcoal,salt or coke)(3.6)

Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth,including soldering etc. as required.(3.7)

Providing and fixing GI lightning conductor final made of 25 mm dia. 300 mm long copper tube having single prong at top with 85 mm dia. 3 mm thick copper base plate including holes etc. complete as required.(4.2)

Providing and fixing GI tape 20mmx3mm thick on parapet or surface of wall for lightning conductor complete as required.(for horizontal run)(4.7)

Providing and fixing GI tape 20mmx3mm thick on parapet or surface of wall for lightning conductor complete as required.(for vertical run)(4.8)

Supply of ISI marked aluminium cable conductor XLPE PVC insulated cable as per IS:7098 etc. all complete as required. 50 sqmmx3.5 core(M-328)

MV cable laying upto 120 sqmm in ground without sand and cover -PVC sheathed/XLPE power cable cable of 1.1 kv --do-- all complete.(5.12)

Providing and fixing of 1400 mmsweep regular/standard model AC fan including connections --do-- all comp.(9.4.2)

Providing and fixing 230 mm AC metal exhaust fan in existing opening including connection testing,commissioning etc as required(M-774)

supplying and fixing of wall mounted LED 20/22 w tube batten electronic driver and accessories as required(9.5.2)

supplying and fixing of wall mounted LED 9/10 w tube batten electronic driver and accessories as required(1.21.1)

Goods & Services Tax (G.S.T.) @ 18%

Labour Cess @ 1%

M/S RIDRISH CONSTRUCTION (BID ID -647647)