GE(S) BTD TOKEN NO 43 OF 2022-23 PROVISION OF CERTAIN SPECIAL REPAIR WORKS UNDER AGE BR II AND EM IV UNDER GARRISON ENGINEER (SOUTH) AT MILIATARY STATION BATHINDA (2ND CALL)

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm Each as doors, windows & ventilators etc and removal from site complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and n,exc 2 Sqm Each and removal from site complete all as specified and directed.

S&F factory made PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening all as specified in Preamble 8B.3.1 of SSR Part -II (2020) and all as shown on drawing on SSR Part-II (2020) including making good the disturbed surface with brick work repair in CM 1:4 finished even & smooth and matching the colour of new plaster with existing suurface complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel heaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet fore tip rail, lock rail & bottom rail on either side and as gap insert fir top rail, lock on either side and as gap insert fir tip rail & bottom raill, paneling of plain colour PVC sheet to be filled in MS frame welded/sealed to the stiles and rails with suitable PVC shet beading and jointing together with solvent cement, supplying & fixing of frame at site complete all as specified and directed.

S&F Aluminium anodixed 100mm long butt hinges with galvanised mild steel screws complete all as specified and directed.

S&F Aluminum Anodised barrel tower bolts of extruded section, 150mm long complete all as specified and directed.

S&F Aluminum handles cast type, Anodised 150mm long complete all as specified and directed.

S&F Aluminum handles cast type, Anodised 125mm long complete all as specified and directed.

Taking down chokats or frames with shutters (without taking off shutters from frames) exceeding 1.5 Sqm but n.exc 4 Sqm Each complete all as specified and directed.

S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 125 x 60mm, including making good the disturbed surface with brick work repair in CM 1:4 finished even & smooth and matching the colour of new plaster with existing surface complete all as specified and directed.

S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 105 x 60mm, including making good the disturbed surface with brick work repair in CM 1:4 finished even & smooth and matching the colour of new plaster with existing surface complete all as specified and directed.

S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 75 x 60mm, including making good the disturbed surfacewith brick work repair in CM 1:4 finished even & smooth and matching the colour of new plaster with existing surface complete all as specified and directed.

M&L for Providing cement concrete Type C 1 (1:3:6) using 20mm graded aggregate as in back filling of steel chowkhat single or double rebated or for fixing hold fast complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and removal from site complete all as specified and directed.

S & F Factory made 35mm thick second class hard wood for plain framed panelled shutters (any number of panels) with lock rail and panel or 9mm B.W.P. commercial ply or 12mm veneered partical board with commercial veneering on both faces. The size of rail & style as per IS: 1003(Part 1), kiln seasoned and chemically pressure treates, complete all as specified.

Supply and fixing 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), using 2nd class hard wood (Bonsum / Hollock), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed . Note - Wire gauze / glass to be measured and paid separately

S & F 25mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F Stainless steel wire cloth 0.36 mm nominal dia of wire and avarage width of aperture 1.40mm and fixed etc complete all as specified and directed.

S & F in repair Stainless steel wire cloth 0.36 mm nominal dia of wire and avarage width of aperture 1.40mm and fixed etc complete all as specified and directed.

S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F in repair galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S & F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Supply only mild steel Butt Hinges, 100 mm size, medium weight, cold rolled complete all as specified and directed.

S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F continuous (piano) hinges (ISI marked), mild steel, bright finish or electro-galvanised with width of flaps 30 mm (when open) complete all as specified and directed.

S&F 150mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F Eye door viewer (magic eye) of size 10mm fixed in position for door shutters complete all as specified and directed.

S & F Rubber sheed 50mm wide and of thikness not less than 3mm fixed with stainless steel screws at the bottom of the door shutters complete all as specified and directed.

S & F Stainless steel fancy type peg set of four and fixed in position with steel screws complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

M&L for 18/19 thick both side Prelaminated (One side decorative and one side plain) particle board, exterior grade fixed with screws to timber frame work complete all as specified and directed.

S & F 150mm length Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor work complete all as specified and directed.

S&F Framed work such as grills, gratings,etc., with ends of bars shouldered and / or rivetted or forged in to spikes ; framed guard bars ; barred iron doors, ladders,; framed balusters; walk ways ; railings ; and similar works conforming to Fe290, Grade E-165. complete all as specified and as direcetd.

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in Each pane complete all as specified and as direcetd.

S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares not exc 0.5 Sqm in Each pane complete all as specified and as direcetd.

S&F pressed steel shutter for cupboard with sheet thickness not less that 1.2mm thick made to shape as per std drawing of CE BTZ with and incl locking arrangement, handles and one shop coat painting complete all as specified and as direcetd.

M&L for Preparation of new or previously untreated surfaces of steel and iron surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats synthetic enamel paint over a coat of red oxide primer complete all as specified and as direcetd.

M&L for Preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats synthetic enamel paint over a coat of pink primer complete all as specified and as direcetd.

M&L for Preparation of old or previously untreated surfaces of wood and wood based surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats synthetic enamel paint over a coat of pink primer complete all as specified and as direcetd.

Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and as direcetd.

M&L rendering 15 mm thick wall plaster in CM 1:3 mixed with water proofing compound complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for applying two coats of Dr Fixit pidecrete URP in sunken floor portion of toilets & bathroom, chajja, staircase. etc by using URP + cement in the proportion of (1:1.5) and making pedicrete solution and applying by brush etc complete all as specified and as direcetd.

M&L for PCC 1:5:10, type E-2 as in filling of sunken floors etc complete all as specified and as direcetd.

Demolition of Cement Concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and as direcetd.

M & L for PCC (1:2:4) type B-1, 25mm thick as in floor finishing even and fair complete all as specified and as direcetd.

M & L for PCC (1:2:4) type B-1(using 20mm graded stone agg), 50mm thick as in floor finishing even and fair without extra using cement complete all as specified and as direcetd.

Material and labour coloured Non - skid Ceramic tiles 7 to 8 mm thick area of Each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) complete all as specified and as direcetd.

Description all as per Ser item No 50 above but on vertical surfaces as in skirtings etc on 10mm thick back coat in CM 1:4, complete all as specified and as direcetd.

Material and labour coloured Non - skid Ceramic tiles 7 to 8 mm thick area of Each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including the provision of 15mm thick bedding layers in CM 1:6 complete all as specified and as direcetd.

Material and labour for glazed ceramic coloured tiles 350 x 200 x 7mm/450 x 350 x 7mm thick on vertical surface such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over and including 10 mm thick screed plaster in CM 1:4 complete all as specified and as directed

Material and Labour for joint free glazed ceramic coloured tiles of approved quality in vertical surfaces 450mmx300 mm x7mm/ 600mm x 300 x 7mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including 10mm thick plaster in CM 1:4 complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding and rubbish off the premises complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including M&L for 15 mm thick screed in cement mortar (1:4) and finish the surface rough to receive the tile complete all as specified and directed.

M&L in repairs marble work (Udaipur green slabs) 18 to 20 mm thick (table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounding the edges of stone sslabs on edges over 15mm thick screed bed complete all as specified and directed.

M&L for 20 mm thick Kota stone slabas in steps \ landing of staircase, mirror polished laid over 15 mm thick screed bed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM(1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F in repair 15mm bore chromium plated angular Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in replacement Brass chromium plated shower rose 125mm size with arm and with or without swivel joints to steel pipe or union complete all as specified and directed.

S&F in repairs 15mm dia bore fancy type chromium plated concealed stop valves of cast copper alloy with oong shank & cup etc complete all specified and as directed.

Supply and fixing Tubular towel rail, 20mm dia, D type, 60cm long between flanges (Brass chromium plated) complete all as specified and directed.

S&F in repair chromium plated soap tray 1mm thick any type and dixed to plugs on wall wit chromium plated brass screws complete all as specified and directed.

S&F fancy type chromium plated Bib tap 15mm dia cast copper alloy with crutch or butterfly handle, screwed down, screwed for brass ferrule and fixing complete all as specified and directed.

S&F in repair fancy type chromium plated Bib tap 15mm dia cast copper alloy with crutch or butterfly handle, screwed down, screwed for brass ferrule and fixing complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white with trap (excluding flushing cistern and flush pipe) including connection to drain and to flushing pipe etc., including plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device, jet spray complete all as specified and directed

Supply and fixed in repair plastic water closet seat cover, black/white or any colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and as directed

S&F in repair PVC 10 liter capacity valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed

Supply and fixing in repair Toilet paper holder of vitreous china fixed to walls with chromium plated brass screws complete all as specified and as directed

S & F in replacement PVC connection 15mm dia and 600mm long with two Nos of brass check nuts and washers complete all as specified and as directed

Supply and fixed in repair cast iron nahani trap 125mm dia with CP grating (with or without waste hole) complete all as specified and as directed.

S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe for wash hand basin complete all as specified and as directed.

S&F stainless steel plate racks of size 900mmx600mmx250mm and thickness of SS strip of 1mm fixed on wall etc complete all as specified and as directed.

S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, incl 40mm waste fitting, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm etc complete all as specified and as directed.

Supply and fixing for 25mm dia fancy type PVC coated in wooden finish on MS pipe coloured curtain rod with brackets and knobs at both ends with 6No rings in 1meter length as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified.Note:- The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account complete all as specified and as directed.

Taking up or down GI tubing 15mm bore pipe complete all as specified and as directed.

Taking up or down GI tubing 20mm bore pipe complete all as specified and as directed.

S&F GI tubing 15mm bore medium grade with all fittings, fixed to wall, ceiling to laid under floor complete all as specified and as directed

S&F GI tubing 20mm bore medium grade with all fittings, fixed to wall, ceiling to laid under floor complete all as specified and as directed.

Refixing old GI tubing 15mm bore pipe and connections in new or old position as on walls ceiling floors etc including cleaning complete all as specified and as directed

Refixing old GI tubing 15mm bore old steel tubing and connections in new or old position as on walls ceiling floors etc including cleaning complete all as specified and as directed

Taking down rain water pipe and eaves gutters (any size and pattern) incl all fittings heads shoes bends swan necks etc complete all as specified and as directed.

S&F PVC110mm bore (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with MS clamps complete all as specified and as directed.

S&F PVC110mm bore (SWR) bends, fixed to walls complete all as specified and as directed.

S&F in repair 100mm CI connection socket to fit out let of WC complete all as specified and as directed.

S&F cast iron cowls 50mm bore complete all as specified and directed

S&F in repair 20mm gun metal gate valves with iron whel head complete all as specified and as directed.

M & L for Cutting chases, pinning in. making,good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

S&F in repair EWC Vitreous china of size 810x405x730mm with vitreous china flushing cistern 10 liters capacity , low level, with inlet, ball valve, float and handle including brackets fixed with PVC connection 450 mm long including P or S traps, seat cover, PVC valveless, complete all as specified and as directed

S & F in repair Jet spray, CP, brass body with wall hook and 1 mtr SS pipe complete all as specified and as directed

S & F in repair stainles steel sinks with drainage board made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 x 460 mm and bowl size 410 x 330 x 160 mm complete all as specified and as directed

S&F PVC corner shelf of 15cm radius complete all as specified and as directed.

S&F Vitreous Chinaware wash basin, white, flat back, size 550x400mm excluding ditto but including brackets (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand, 32mm dia waste pipe coupling & PVC waste pipe of 32mm dia etc complete all as specified and as direcetd.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth ; for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, for laying cables etc. not exceeding 10 Sq m on plan and not exceeding 1.5 m in depth and getting out in soft /loose soil complete all as specified and as direcetd.

Returning, filling, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in hard/dense soil complete all as specified and as direcetd.

Removing excavated material exceeding 250 m but not exceeding 500 m and depositing where directed at a level not exceeding 1.50 mtr above the starting point complete all as specified and as direcetd.

Removing excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.50 mtr above the starting point complete all as specified and as direcetd.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar and laid in trejches incl all fittings & accessories mtr above the starting point complete all as specified and as direcetd.

M&L for 150mm dia (internal) Sail-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and as direcetd.

M&L for providing PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in conc bed to drain pipe including packing under & haunching against the sides of pipe 150mm dia (internal ) after these are laid in trenches complete all as specified and as direcetd .

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching complete all as specified and as direcetd.

Dismantling of cast iron soil vent pipe 100mm dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and as direcetd.

Dismantling of cast iron soil vent pipe 75mm dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and as direcetd.

Dismentling and disconneting of existing CI soil waste & vent pipes 100 mm bore fixed to walls or laid in trenchas complete all as specified and as directed

Dismentling and disconneting of existing CI soil waste & vent pipes 75 mm bore fixed to walls or laid in trenchas complete all as specified and as directed

S&F 100mm cast iron sand cast soil, waste and vent pipes in any length with or without ears, fixed with chemical cement joints, fixed in walls complete all as specified and as directed

S&F 75mm cast iron sand cast soil, waste and vent pipes in any length with or without ears, fixed with chemical cement joints, fixed in walls complete all as specified and as directed

S&F 50mm cast iron sand cast soil, waste and vent pipes in any length with or without ears, fixed with chemical cement joints, fixed in walls complete all as specified and as directed

S&F 100mm cast iron sand cast soil, waste and vent pipes in any length with or without ears, with cement joints, but laid in trenches complete all as specified and as directed

S&F 75mm cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, but laid in trenches complete all as specified and as directed

S & F 100mm bore bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed

S & F 75mm bore bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed

S&F in repair 75mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) type B1 complete all as specified and as directed.

S&F 100 mm bore, Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with oval access door complete all as specified and as directed

S&F 75 mm bore, Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with oval access door complete all as specified and as directed

Material and labour for providing cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in repair of broken or cracked chhajjas, RCC columns, beams, stairs / steps, parapets etc in one or two layers as required 9thickness from 25mm to 40mm) and finishing the surface with 15mm thick cement plaster in CM 1:4 including taking out loose/providing concrete, portions and applying neat cement slurry before providing concrete complete all as specified and directed. Note:- Rates deemed to include for any scaffolding/ ladders or any other mean to work in two story buildings.

M&L for Bends suitable for 100mm dia CI pipe with duck's foot or heel rest complete all as specified and as direcetd.

M&L for Salt-glazed stoneware gully traps of size 150 x 150mm, square or round mouthed, type 'P' complete all as specified and as direcetd.

M&L for Extra over cast iron pipes 100mm bore pipes, bend joints etc is provided Epoxy joints in lieu of cement joint complete all as specified and as direcetd.

M&L for Extra over cast iron pipes 75mm bore pipes, bend joints etc is provided Epoxy joints in lieu of cement joint complete all as specified and as direcetd.

M & L for precast cement concrete type B1 1:2:4 (20mm graded agg) as in kitchen sink slab etc (of any section indicated) with plain fair faces, incl chamfers weatherings, throating etc and setting in mortar complete with joints to match complete all as specified and as directed

Demolition of RCC of any of any description such as kitchen chimney, chajja, shelves, OHT tanks etc andin any position not otherwise specifically provided for complete all as specified and as directed (reinforcement cut as required to facilitate demoltion)

Dismantling of brick tiles or tertacing tiles single layer on roof & disposal of retrieved material up to distance n.exc 100m where directed, complete all as specified and directed.

Dismantling of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof disposal off rubbish upto a distance n.exc 100m where directed) complete all as specified and as directed

M&L screed bed or bedding layer 15mm thick CM (1:4) of as on roof surfaces parapet or vertical beam surface (horizental or vertical) of finish even and smooth witout using extra cement. Note using only course sand (Toka sand) in screed bed/plastering complete all as specified and as directed.

Preparation of Roof / wall concrete/plastered surfaces & applied a coat of cold bituminous primer over cleaned surface @ 0.40 Kg/Sam followed by APP modified five layer polymeric membrane 3mm thick, minimum wt 3.50 Kg/Sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/Sam) manufactured by M/S STP Ltd/IWL India Ltd or its equivalent, laid as per the manufacturers instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces if required complete all as specified and as directed.

S & F Cement concrete tiles 25cm x 25cm x 20 to 22 mm thick, machine pressed; set jointed and pointed in neat cement slurry over and including 15mm thick screed in CM (1:4) with and including mixing of liquid water proofing compound as per manufacture specifications, as in roof and floor tiles complete all as specified and as directed.

Making benching with PCC (1:2:4) type B0 using WPC as per manufacturer's instruction along side wall adjoining to roof in concave shape complete all as specified and directed. Note : WPC shall be measured and paid separately.

M&L for Formwork to soffits of suspended slabs, such as roof slabs floor slab, landings and similar work not exceeding 200mm thick horizontal or sloping for rough finished concrete surface complete all as specified and as direcetd

Taking down cement plaster on brick work or concrete surfaces etc including raking out joints or hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L for two coats of cement base paint on new plastered wall surfaces after applying over a coat of primer including preparation of surfaces complete all as specified and directed

M & L for two coats of cement base paint on new plastered wall surfaces after applying a coat of alkali resistant primer including preparation of surfaces complete all as specified and directed

M & L for Preparing of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing, scraping down smoke soot, moulds, mass and efflorescent, salt and trading oil and greasy spouts and applying one coat of cement base paint on walls including cornices etc. complete all as specified and directed.

M&L for Rendering 15mm thick cement palster in CM 1:6 on brick or concrete surfaces of wall other than fair faces finished even and smooth without using extra cement all as specified and as directied.

M&L for Rendering 15mm thick cement plaster in CM 1:4 on brick or concrete surfaces finished even and fair faces of wall without using extra cement all as specified and as directed

M&L for Rendering 5mm thick cement palster in CM 1:3 on brick or concrete surfaces as in ceiling in two layers other than fair faces finished even and smooth without using extra cement all as specified and as directied.

M & L for Preparation of new plastered or unplastered surfaces of wall, applying 3mm thick wall care putty on wall and two coats of distemper oil emulsion over one coat of priming plastered surfaces with alkali resistant priming paint complete all as specified and directed

Preparation of old (Previously treated) plastered or unplastered surfaces of wall by washing, rubbing down and stopping of distempered or painted surfaces of walls and applying one coat of oil bound distemper white or tinted on walls complete all as specified and directed.

Supply and fixing anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

All as per Srl item No. 142 Above but steel ventilators to hung

Supply and fixing powder coated aluminium anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed

Supply and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) to the existing window frame with C.P. brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved andodised aluminium standard section around the opening, all complete as per requirement complete all as specified and directed

M&L for providing RCC type B1 1:1½:3 (20mm graded agg) as in slabs supported on walls, lintel beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like complete all as specified and as direcetd.

M&L TMT steel bars 10 mm dia and over cut to length bent to shape required, including cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and as direcetd.

Supply only of liquid water proofing compound complete all as specified and directed. Make:- Dr. fixit(as per manufacture's specification)

Demolition of Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) complete as specified and directed.

S&F for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete as specified and directed. (As in sunsheds).

S&F mild steel Framed brackets of angles or tees with web and flanges as in cooler stand /chajjas cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg Each brackets, conformingto Fe.290.Gde-E-165 (Brackets over 10 kg Each to be measured under 'Structural Steel') complete all as specified and as directed

Demolition of brick work built in cement mortar including all quions, arches , pillars etc. complete all as specified and as directed

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 M means radius built in CM (1:4) using old size bricks complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 M means radius built in CM (1:4) except brick using old size bricks complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 M means radius built in CM (1:6) using old size bricks complete all as specified and as directed.

M & L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregates as in bands, bedding, benching of manholes, coping, surface channel, roof kerbs or mud stops, rounded or chamfered on edges etc including necessary from work complete all as specified and as directed.

Material and Labour for preparation of old steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide or zinc chrome complete all as specified and directed .

M&L for providing 50 mm thick PCC 1:3:6, type C-1 using 40 mm graded stone aggregate as in plinth protection, surfaces finished even and smooth with out using extra cement complete as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6, type C-2 using 40 mm graded stone aggregate as in plinth protection, flooring surfaces finished even and smooth with out using extra cement complete all as specified and as direcetd.

Dismantling existing broken unserviceable PVC tank of capacity 500 Ltrs complete all as specified and as direcetd.

Dismantling water tanks of exc 250 and n. exc 500 ltrs capacity water storage tanks complete all as specified and as directed

Supply and fixing three layers 500 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories complete all as specified and directed.

Supply and fixing ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm bore ( weight 210 gms Minimum) complete all as specified and as directed.

M&L for Preparation of new plastered or unplastered surfaces of walls , complete all as specified and as directed and applying the following :- (a) Applying wall care putty in two coats on wall surface and smoothening the surface with sand papers/Mechanised sanding etc prepatory to paint. (b) Two coat of Oil Bound distemper over a coat of chalk whitening priming by using Airless spray/Roller over complete complete all complete all as specified and directed. Note : Contractor may use manual scrapping tools for complete removal and surface prepration with prior approval of engr-in-charge in case of using of Mechanical equiment are not possible.

Complete removal of existing treatment on old internal wall surfaces of any description, preperation of surface by Mechanised sander having suction vaccum Bag using Smart Periodical methodology, complete all as specified and as directed and applying the following :- (a) Applying wall care putty in two coats on wall surface and smoothening the surface with sand papers/Mechanised sanding etc prepatory to paint. (b) Two coat of Oil Bound distemper over a coat of primer by using Airless spray/Roller over complete complete all complete all as specified and directed. Note : Contractor may use manual scrapping tools for complete removal and surface prepration with prior approval of engr-in-charge in case of using of Mechanical equiment are not possible.

M&L for two coats of white wash on new plastered surfaces as in walls including preparation of new surfaces complete all as specified and as directed.

M&L for preparing newly plastered or unplastered surface of ceiling and applying three coats of white wash complete all as specified and as directed.

Preparing of unplastered old decorated surfaces of ceiling by brooming down or steel wire brushing, scraping down smoke soot, moulds, mass and efflorescent, salt and trading oil and greasy spouts and applying one coat of white wash on ceiling including cornices etc. complete all as specified and directed.

M&L for complete removal of esixting surfaces of ceiling and applying two coat of white wash of old plastered ceiling surfaces complete all as specified and directed.

M&L for Preparation of new plastered or unplastered surfaces of walls, complete all as specified and as directed and applying the following:- (a) Applying wall care putty in two coat of exterior acrylic emulsion by using Airless spray/Roller over and incl a coat of acrylic emulsion external primer complete all as specified. Note : Contractor may use manual scrapping tools for complete removal and surface prepration with prior approval of engr-in-charge in case of using of Mechanical equiment are not possible.

Complete removal of existing treatment including filling depression of scraped surface with wall putty two coats 1.5mm thick Each on old external wall surfaces of any description prepration of surface by Mechanised sander having suction vaccum Bag using smart periodical methdologycomplete all as specified and as directed and applying the following:- (a) Two coat of exterior acrylic emulsion by using Airless spray/Roller over and incl a coat of acrylic emulsion external primer complete all as specified. Note : Contractor may use manual scrapping tools for complete removal and surface prepration with prior approval of engr-in-charge in case of using of Mechanical equiment are not possible.

M&L for preparation of old steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint on wooden surfaces complete all as specified and as directed.

S&F 50mm Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 fixed to walls, ceiling on in floors etc complete all as specified and as directed.

M&L 40mm GI pipe medium grade, made to shape as in spout pipe in sunken/verandah/Balcony complete all as specified and as directed.

S&F SFRC (Steel fibre Reinforcement concrete cover & frame) HD_20mm graded rectangular internal size 59x590mm & external size of frame 800x800x100mm incl manhole cover having size 590x590x50mm thick and fixed over earthing manhole after demolition of PCC coping & mabhole cover & set in CM 1:4 incl PCC benching in CM (1:2:4) and finishing smooth complete all as specified and as directed.

M&L for Rendering 15mm thick cement plaster in CM 1:4 on brick work or concrete surfaces even and smooth without using extra cement complete all as specified and as directed

M&L for Rendering 15mm thick cement plaster in CM 1:6 on internal surface of brick work or concrete surfaces even and smooth without using extra cement all as specified and as directed

M&L for Rendering 15mm thick in CM 1:4 on external surface even and smooth without using extra cement & with integral water proofing compound (as per manufacturer's instructions) complete all as specified and as directed. Note:- WPC shall be measured and paid for separately.

M&L for hard core of broken bricks gauge n.exc 63 mm, deposited, spread and levelled in layers in exc 15 cm thick. Watered and rammed to true surface complete all as specified and directed.

Material and labour for PCC (1:4:8), type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete and sub base in floors etc complete all as specified and as directed.

S & F 4mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages, lapped, wire and laid in position, including closing after filling complete all as specified and as directed.

Taking down carefully existing copper point wiring (light,fan, socket or power) complete including fixture and fittings such as switches, bellpushes, ceiling roses, pendents, regulators, sockets, light fitting, callbells etc removiing materials to store for keeping in safe custody or for taking credit(credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. to match existing complete all as specified and as directed.

M & L for point wiring for one light / fan point controlled by one switch with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FR-LSH in and including concealed PVC conduit 20 mm dia heavy duty ISI marked, steel terminal sunken boxes and 3 mm thick phenolic laminated sheet top cover for sunken boxes flush to surface for one light point/fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 Sqmm copper conductor cable FR-LSH connected to common earth dolly complete including cutting, chasing the surface and then making good the same in CM (1:3) complete all as specified and directed .(Note :- Switches, sockets etc shall be measured and paid for separately under appropriate items of Sch 'A' /BOQ ).

All as per srl item No. 184 (here-in-before) but socket 3 pin 5 Amp 230 volt flush type on same board complete all as specified and as directed.

All as per srl item No. 184 (here-in-before) but for one socket point out let 3 pin 5 Amp in independent board complete all as specified and as directed.

All as per srl item No. 184 (here-in-before) but for call bell point complete all as specified and as directed.

All as per srl item No. 184 (here-in-before) but for one light point controlled by two two way switch complete all as specified and as directed.

All as per item No. 184 here in before but for one socket out let 3 pin 15 Amp with 2.5 Sqmm PVC copper conductor and 2.5 sq mm PVC insulated copper conductor as earth contiuity conductor complete all as specified and as directed.

S&F Switch piano, flush type single pole, one way 5 Amp complete all as specified and as directed.

S&F Switch piano, flush type single pole, one way 15 Amp complete all as specified and as directed.

S&F Switch piano, flush type single pole, two way 5 Amp complete all as specified and as directed.

S&F bell push 5/6 Amps 230 V AC complete all as specified and as directed.

S&F Socket outlet 3 pin, 5A, flush type complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 Amp flush type complete all as specified and as directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. complete all as specified and as directed.

S&F Ceiling rose, 3 terminal PVC/polycarbonate, suitable for 230 V, AC, 50 Hz supply complete all as specified and as directed.

S&F call bell ding dong type AC 230 V complete all as specified and as directed.

S & F in repalacement sub main two single core PVC copper conductor unsheathed wire multi standed 6.0 Sqm including sutting chasing and grouting PVC pipe including TEE. Elbow, Bend etc and including 6.0Sqmm copper conductor single core wire connected by common earth all as specified ; in & including 20mm dia concealed PVC conduit, medium grade, ISI marked complete all as specified and as directed. (Note :- Two length of 6.0 Sqmm cable and one length of 6.0 Sqmm earth cable along with PVC conduit will be measured as one running length)

Dismentaling and taking down carefully MCB Distributing boxes including MCBs/isolators of any type and model complete all as specified and as directed.

S&F MCB 6-32 Amp 240V SP 10 KA ‘C’ series complete all as specified and as directed.

S&F MCB 20-25 Amp 240V SPN 10 KA ‘C’ series complete all as specified and as directed.

S&F MCB SPN 32-40 Amp C CURVES MCB repturingcapacity 10 KA ‘C’ series complete all as specified and as directed.

S&F MCB 63 Amp TPN 10 KA ‘C’ series complete all as specified and as directed.

S&F sheet metal encloser double door 8 way SPN 240V ISI marked complete with neutral and earth link and bus bar complete made out of CRCA steel sheet Factory made including blanking plate for unused module complete all as specified and as directed.

-do- all as per item No 206 above but 04 way TPN 415 V with provision of FP MCB as incomer and SP MCB's as outgoing complete all as specified and as directed.

S & F wall mounted LED batten fitting 1x10 watt, 6500K, 2ft complete with decorative ultra slim square profile LED lighting fixture with extruded polycarbornate enviroment friendly, energy efficient complete with all light fittings connection complete complete all as specified and directed.

S&F wall mounted LED batten fitting 20 (±10%) watt, 6500K, 1.2m, efficacy not less than 90 lumen/watt , extruded Aluminium/polycarbonate, PC diffusor and inbuilt driver complete includign making connection complete all as specified and directed.

S & F decorative wall light fixture (CITY-2 of make havells or equivalent make) made of polycarbonate suitable for retrofit 9W LED lamp (base B-22) complete with & including one lamp 9W lamp (base B-22), 6500K, complete all light fittings connection complete all as specified and directed.

S&F Lamp holder PVC/polycarbonate type with back plate complete complete all as specified and directed.

S&F LED 7W Lamp base B-22 complete all as specified and directed.

S&F LED street light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrossion resistant complete with IP 65/66 protection, including fixing with GI/MS bracket made out of suitable size of light grade tube with suitable length bent to shape with 02 sets of MS clamps made out of minimum 3 mm MS flat iron with suitable bolt and nuts complete with making connection complete all as specified and directed

M & L for earthing with galvanized steel plate electrode 600 x 600 mm x 6.3 mm size directly burried in ground vertically to earth pit not less than 2.25 meter deep below normal ground level with top edge of the earth plate not less than 1.5 m below normal ground level surrounded with coal dust and common salt filling in alternative layers of 15 cm thick Each connected to and including GI earth wire 4 mm dia by means of nuts, bolts, check nuts & washers etc connecting to earthing test point, main switch board and including 15 mm dia GI pipe light grade for protection of earth lead from earth plate to distribution board and 20 mm dia GI pipe medium grade connected with funnel having wire mess for watering purpose including necessary excavation and earth work, PCC (1:2:4) type B-1 (using stone aggregates) for earthing pit, 10mm thick cast iron cover with angle iron frame all as specified and shown in electrical plate No 3 of SSR Part-I and testing on completion including replacement of old unserviceable.

Taking down carefully existing meter and electric/electronic meter from qtrs, deposite metosite meters safely to E&M store complete all as specified and directed.

Fixing only and connecting electric meters complete all as specified and as directed. Note :- Meters will be provided by the E&M store free for fixing only.

Taking down unsv ceiling fan/exhaust fan, sealing cable end dismentaling blades and removing fan and blades to E&M store yard complete all as specified and as directed.

Fixing only exhaust fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and as directed. Note:- exhaust fans will be provided by the E&M store free for fixing only.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and as directed. Note:- Ceiling fans will be provided by the E&M store free for fixing only.

Note:- If at site nos of geyser, ceiling fan, exhaust fan, electric meter is found before starting the work, The contractor should hand over these items to unit Rep in writing to avoid the last minute complicacies and refxing same is the sole responsibility of the contractor before handing over the site to user.

Note:- All debris obtained from dismintling, demolition and taking down (Exept credited to contractor) shall be desposed off out side MOD land and charges, if any, as incurred in civil area as per their regulator shall be deemed to be including in quoted rates. No extra claim on this account shall be admissble.

Note:- Net contract sum shall be calculated after deduction of Sch of credit.

M/s Manav Builders

G N CONSTRUCTIONS

M/S GOYAL BUILDERS

Aman Enterprises

M/S VIAJY BUILDERS & DEVELOPERS

M/s Balvinder Singh Engineer and Contractors

SHARDA ENTERPRIES