Renovation of 11 Nos. GAD rooms (i.e. 101-109 and 201 and 203) of Circuit House Willys Park Shimla (H.P).

Dismantling tile work in floors and roofs laid in cement mortar including stacking the material in specified manners as per the direction of Engineer-In-Charge and disposal of unserviceable materials in all leads and lifts. For thickness of tiles 10mm to 25 mm

Demolishing cement concrete manually/ by mechanical means including sstacking the material in specified manners as per the direction of Engineer-In-Charge and disposal of unserviceable materials in all leads and lifts. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping site for lead upto 10 km periphery area for all lifts, complete as per directions of Engineer-in-charge.

Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform as per the directions of Engineer in Charge including carriage of materials within all lead, lifts and heights.

Centering and shuttering including strutting, propping etc. and removal of form for : Edges of slabs and breaks in floors and walls Under 20 cm wide as per the directions of Engineer in Charge including carriage of materials within all lead, lifts and heights.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) as per the directions of Engineer in Charge including carriage of materials within all lead and lifts.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) as per the directions of Engineer in Charge including carriage of materials within all lead and lifts.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) TATA/SAIL/JSW or equivalant make as approved by HPPWD as per the directions of Engineer in Charge including carriage of materials within all lead and lifts.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more TATA/SAIL/JSW or equivalant make as approved by HPPWD as per the direction of Engineer-In-Charge including carriage of mateials within all leads, lifts and heights.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all heights Cement mortar 1:4 (1 cement :4 coarse sand) as per the direction of Engineer-In-Charge including carriage of mateials within all leads, lifts and heights.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) as per the direction of Engineer-In-Charge including carriage of mateials within all leads, lifts and heights. . Second class teak wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per the direction of Engineer-In-Charge including carriage of mateials within all leads, lifts and heights

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Kajaria/Nitco/RAK or equivalent make as per the direction of Engineer-In-Charge including carriage of mateials within all leads, lifts and heights. (Basic rate not less than Rs. 50.00 per Sqft)

Providing and fixing Ist quality ceramic glazed wall tiles of size 300x600mm conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete Kajaria /Nitco / RAK or equivalent make as per the direction of Engineer-In-Charge including carriage of mateials within all leads, lifts and heights. (Basic rate not less than Rs. 50.00 per Sqft)

15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall as per the direction of Engineer-In-Charge including carriage of mateials within all leads, lifts and heights

Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge as per the direction of Engineer-In-Charge including carriage of mateials within all leads, lifts and heights. (Basic rate not less than Rs. 225.00 spft)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge including carriage of materials within all leads, lifts and heights. 20 mm nominal outer dia Pipes Supreme/Finolex/Victus or equivalent make

Providing and fixing high pressure PVC Finloex/Supreme 6kg pressure heavy duty make spigot and socket waste and ventileting pipe ISI marked including fixing with approved adhesive etc complete inlcuding carraige of all labour equipment and material to verious location through all modes of transportation in all leads & lifts incidental charges a) 82 millimetres nominals size.

Providing and fixing high pressure PVC Finloex/Supreme 6kg pressure heavy duty make spigot and socket waste and ventileting pipe ISI marked including fixing with approved adhesive etc complete inlcuding carraige of all labour equipment and material to verious location through all modes of transportation in all leads & lifts incidental charges a) 110 millimetres nominals size.

Providing and fixing 75mm dia PVC ISI marked floor traps of self cleaning design including fixing with approved adhesive complete including cost of cuting ande making good the walls and the floors as per direction of Engineer in Charge including carriage of materials within all leads, lifts and heights. Supreme/Finolex/Victus or equivalent make

Providing and fixing vitreous china wash down water closet Jaquar make Lyric range of size 370X670X720mm Cat. No.LYS-WHT-38851S220UFSMN 'S' trap floor mounted Single pice With UF Soft close slim seat cover, Hinges, Duel Flush cistern fitting, fixing accessories and accessories set etc. or equivalent series of Cera/ Amarican standred/Jal/Hindware complete in all respect, water closet ( European Type - WC pan) with integral 'S' Trap-220mm including jointing the trap with soil pipe in cement mortar 1:1 ( one cement, one sand) (with cistern, seat cover and flush fitting) for stallation, testing & commissioning of sanitary fixtures as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights.( snow white)

Providing and fixing vitreous china table/counter top white wash basin of modern design with rectangular shape with tap hole Jaquar make D'Arc range Cat No.DRS-WHT-37601 size 615X415X150mm or equivalent series of Cera/ Amarican standred /Jal /Hindware including cutting holes and making good for stallation, testing & commissioning of sanitary fixtures as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights.

Providing and fixing 15 mm nominal size Single lever tall boy with 155mm extension body fixed spout without popup waste system with 600mm long braided houses/ connection pipes Jaquar make KUBIX PRIME range Cat No. KUP-35005BPM or equivalent series of Cera/ Amarican standred/Jal/Hindware as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights..

Providing and fixing single lever wall mixer with provision for over head shower with 115mm long bend pipe on upper side, with build-in non return valve connecting leg and wall flanges.Jaquar make Chrome finish KIBIX PRIME range Cat No. KUP-35117PM or equivalent series of Roka/American Standred/Jal/Hindware/Cera make as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing C. P. Brass shower rose with 15mm or 20 mm inlet Jaquar make chrome finish maze range Cat No. OSH 1629 Overhead Shower 240X240mm Square Shape Single Flow (Body & Face Plate Stainless Steel) with Rubit Cleaning System or equivalent series ofCera/ Amarican standred/Jal/Hindware as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights..

Providing and fixing C. P. Brass Shower Accessories Jaquar make chrome finish Cat No. SHA-455L400 Shower Arm 400X25X25mm Square Shape for Wall Mounted Showers with Flange or equivalent series of Cera/ Amarican standred/Jal/Hindware as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights..

Providing and fixing 110mm PVC P or S Trap (Heavy Duty) for water closet PVC D-plast/Victus/ Supreme/ Finolex or equivalent make as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights..

Providing and fixing bottel trap with fully casted body (with integral partition ) Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange Jaquar make chrome finish Cat No. ALD-769L300X190 or equivalent series of Cera/ Amarican standred/Jal/Hindware as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights.

Providing and fixing CP brass waste coupling 32mm size full threaded with 130 mm height for wash basin or sink Jaqure make Alied range Cat No. ALD-705L130 or equivalent series of Cera/ Amarican standred/Jal/Hindware as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights..

Providing and fixing bath accessories SS Towel rack Jaquar make Cat No. AHS-1581 or equivalent series of Cera/ Amarican standred/Jal/Hindware with C.P. brass screw as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights.

Providing and fixing CP brass soap dish Jaquar make Cat No. CPA-1131 Soap dish or equivalent series of Cera/ Amarican standred/Jal/Hindware with CP brass brackets fixed to wooden cleats with CP brass screws as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights.

Providing & Fixing in position Health Faucet with 8mm dia 1 meter long flexible tube & wall hook having Cat No. ALD-573 or equivalent series of Cera/ Amarican standred/ Jal/ Hindware as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights.

Providing & Fixing in position C.P. Brass coat and hat robe hook Two way Jaquar make Cat No. AKP-35761P or equivalent series of Cera/ Amarican standred/ Jal /Hindware as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights.

Providing and fixing C.P. Paper Holder with shelf Jaquar make Cat No. AKP-35757PS or equivalent series of Cera/ Amarican standred/Jal/Hindware as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights.

Providing and fixing CP brass bib tap with wall flange 15mm dia Jaquar make Aria range Cat No. ARI-39037 (Cera make Cat No. F1014152) or equivalent series of Cera/ Amarican standred/Jal/Hindware as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights.

Providing and fixing 15mm nominal size CP brass angle valve/ Stop Cock with wall flange Jaquar make Cat No. ARI-39053 or equivalent series of Cera/ Amarican standred/Jal/Hindware as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights.

Providing & Fixing C.P. Towel Ring squre with round flange Jaquar make Cat No. CPA-1121RD or equivalent series of Cera/ Amarican standred/Jal/Hindware as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights.

Providing and fixing 100mm dia C.P. Grating Chilly make as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights.

Providing and fixing G.I. Union (ISI Mark) as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights.. i) 20 mm dia

Providing and fixing G.I. Union (ISI Mark) as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights.. i) 25 mm dia

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage as per direction of Engineer-in-Charge as per the direction of Engineer-In-Charge including carriage of mateials within all leads, lifts and heights .a) For vertical surface two coats @ 0.70 kg per sqm

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage as per direction of Engineer-in-Charge as per the direction of Engineer-In-Charge including carriage of mateials within all leads, lifts and heights .b) For horizontal surface one coat @1.10 kg per sqm.

Providing and fixing 600mmx450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet or as approved by Engineer-in-Charge and fixed to wooden/PVC plugs with C.P. brass screws and washer as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights

Providing and fixing 450mm long braided hose/connection pipe with two 15mm nuts & rubber washers (suitable for geysers) of Jaquar make Allied range Cat No. ALD-805B or equivalent series of Cera/ Amarican standred/Jal/Hindware as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights (i) 15mm nominal bore

Providing and fixing P.V.C. waste pipe of approved make for wash basin and sink as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights.

Please Enable Macros to View BoQ information