Repair and Renovation of Judicial Officers Quarter No 2 4 5 at EAC colony behind DC Court at Dibrugarh

Amount

Civil & Sanitary : Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : Sectional area 40 square centimetres and above

Dismantling roofing including ridges, hips, valleys and gutters etc. and stacking the material within 50 metres lead of :

Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking the mateial within 50 metres lead : Section area 40 square centimetres and above.

Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing the false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by Engineer-in-Charge

Providing wood work in fames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast. Jugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Kiln seasoned and chemically treated hollock wood.

Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part-I) decorative type, core of block board construction with frame of 1st class hard wood and well matched lead 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class teak wood 35 mm thick

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item.) With float galss panes of 5 mm thickness (weight not exceeding etc,)

Providing and fixing glazed shtters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed but hinges bright finished of required size with necessary screws. Second class teak wood

Providing and fixing factory made P.V.C. door fame of size 50x47 mm with a wall thickness

Providing and fixing factory made panel PVC door shutter consisting of frame made out of MS tubes of 19 gauge thickness and sizes of 19mm x 19mm for styles and 15 x 15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC ‘C’ channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on both side forming styles and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat 20mm shall be tapered in 45 degree on the inner side in form top and bottom rail and etc. / sealed to the styles & rails with 7mm (5mm + 2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. 30 mm thick plain PVC door shutters

Providing and fixing cup board shutters 25mm thick with pre-laminated flat pressed three layer particle board or graded wood particle board IS:12823 marked, exterior grade I Type II), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25mm wide x 12mm thick with necessary screws and bridght finished stainless steel piano hinges, complete as per direction of the Engineer-in-charge

Providing and fixing 25 mm thick shutters for cup board etc. Panelled or panelled & glazed shutters Second class teak wood including ISI marked anodized aluminium butt hinges with necessary screws.

Providing wood works in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast hugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately)

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hoods, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/m2

Providing ridges or hips of width 60 cm overall width plain G.S> sheet fixed with polymer coated J or L hoods, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m2

Providing and fixing fibre cement reinforced by organic fibres and/or morganic synthetic fibres roofing accessories in all colours with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete. Barge boards

Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) : White face insulating board

15mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1:3 (1 cement : 3 fine sand)

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Steel reinforcement for R.C.C. work including straightening, cutting, bending placing in position and binding all complete upto plinth level Cold twisted bars

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. Above plinth level upto floor five level, excluding cost of centering, shuttering finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 …..)

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand )zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, leveling & dressing & finishing the top smooth.

Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S.

Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15cm), with intermediate layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30 cm or as decided by Engineer-in-Charge, including compacting each layer by rolling/ ramming and watering all complete as per drawing and direction of Engineer-in-Charge.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. Complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water)

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (two or more coats applied @ 1.67 ltr/10sqm)

Plastering with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of

Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and

Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade (to or more coats)

Painting on G.S. Sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : New work (two ro more coats) including a coat of approved steel primer but ….. etc.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors where required. White Vitreous china Orissa pattern W.C. pan of size

Providing and fixing white vitreous china pedestal type water closet (European type W.C.) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe with manually controlled W.C. pan with ISI marked white solid plastic seal and lid

Providing and fixing wash basin with C.I. brackets, 15 cm C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm

Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required White glazed fire clay kitchen sink of size 600x450x250 mm

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangement.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm

Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931. 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and approved make conforming to IS : 8931 15mm nominal bore

Providing and fixing PTMT pillar cock of approved quality and colour 15mm nominal bore, 107 mm long, weighing not less tan 110 gms.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter each 190.10

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (I) Single socketed pipes. 75 mm diameter

110 mm diameter

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. 25 mm nominal dia Pipes

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of

Providing and placing in position filters of 40 mm diameter G.I. pipe with brass strainer of approved quality

Providing and fixing t filter and lowering to proper levels 40 mm G.I. pipe for tube well including cleaning and priming the tube well.

Providing and placing in position hand pump of approved quality for 40 mm diameter G.I. pipe complete with all accessories.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing f sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m All kinds of soil

Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level : 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in postion and binding all complete above plinth level Mild steel and Medium Tensile steel bars

Centering and shuttering including strutting, propping etc. and removal of form for Foundation footings, bases of columns, etc. for mass concrete

Walls (any thickness) including attached pilasters, butteresses, plint and string courses etc.

Providing and lying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement – All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes.

Electrification Work: Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A

Group B

Group C

Supplying and fixing metal box of 150 mm x 75 mm x 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 piano type switch, connections, painting etc. as required.

Supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc. as required. 5/6 amps switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 75 mm x 75 mm x 60 mm deep

100 mm x 100 mm x 60 mm deep

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required. 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire

2 x 4 sq.mm + 1 x 4 sq.mm earth wire

2 x 6 sq.mm + 1 x 6 sq.mm earth wire

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box / wooden block including connections etc. as required.

Supplying and fixing brass batten / angle holder including connection etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator 8 way, Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required Single pole

Double pole

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40amps

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with chrcoat / cocke and salt as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection / termimation with GI thimble etc. as required.

Supplying and fixing of 32 mm dia x 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm x 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sad cushioning, protective covering and refilling the trench etc. as required. Upto 35 sq.mm.

Supplying of following A.C. ceiling fan complete with all accessories like rod, canopy etc. of following sweeps as approved by the Deptt. As required complete and as directed by the Department [Without regulator]. Aero King Hevells 5 STAR model 1400 mm Sweep.

Supplying of heavy duty A.C. Exhaust fan of 300 mm sweeps as approved by the Deptt. As required complete and as directed by the Department.

Supplying, fitting and fixing of 20 W LED LAMP HAVELS MAKE in the existing lamp holder as specified and directed y the department

Supplying, fitting & fixing of LED street light with pressure die cast housing & toughened glass with individual LEDs with secondary lens optics for city road application IP66 ingress protection and impact resistance of 1K 07.5 kv and 10 kV external surfe protection with Top opening driver cover for easy maintenance. Bajaj EDGE BRTFG 90 W LED CR.

Supplying of PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size etc. as required 3/c X 6 sq.mm 1.1 KV grade aluminium armoured UG cable.

M/S PAPORI ENTERPRISE

Jitul Das