WELCOME MAINT, PERIODICAL SERVICES AND CERTAIN B/R MISC WORKS AT ASHOK VIHAR, ENGR REGT AND ADJOINING AREA UNDER AGE B/R-II OF GE (NORTH) UDHAMPUR

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed. Note :- Materail obtain from dismantling shall be thrown away out side from MoD land and rates for the shall be deemed to include in the quoted rates.

Demolition of brick work or stone boulder masonery, built in cement mortor including all quoins, arches, pillars etc, complete all as specified and directed.

M&L for brick work with sub class ‘B’, old size bricks, straight or curved on plan exc 6 mtr mean radius, built in CM 1:6, complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position, not otherwise specifically provided for, complete all as specified and directed.

Taking down cement plaster of any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:6 on fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 5mm thick rendering in CM 1:3 as on ceilings and finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for non skid ceramic coloured tiles, 7 to 8mm thick (sqare/ rectanglear), area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floor, skirtings etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 15mm thick screed bed/ plaster in CM 1:4, complete all as specified and directed.

M&L for coloured glazed ceramic coloured tiles of size 300x200x7/8mm or 350x250x7/8mm or 450x350x7/8mm as on vertical surfaces of walls, dados, skirtings etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 10mm thick rendering in CM 1:4 and fair to recive tiles, complete all as specified and directed.

M&L for 10mm thick vitrified light shade coloured ceramic tiles (square/ rectangular), polished, area of each tiles not exceeding 0.36 Sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for 10mm thick vitrified light shade coloured ceramic tiles (square/ rectangular), polished, area of each tiles not exceeding 0.36 Sqm as in skirtings, dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 10mm thick plaster in CM 1:4, complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in floor or roof and finished the surface even and smooth with using extra, complete all as specified and directed.

M&L for 50mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection, laid in alternate ways (not exc 2.0 Sqm each) and finished the surface even and smooth without using extra cement, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame), area not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame), area exc 1.50 Sqm but not exc 4.00 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed.

Taking down shutters of any description, area exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed.

S&F pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate etc. complete, frame size 125mm x 60mm including one shop coat of red oxide zinc chrome primer, complete all as specified and directed.

S&F pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate etc. complete, frame size 105mm x 60mm including one shop coat of red oxide zinc chrome primer, complete all as specified and directed.

S&F plain framed panelled shutter 35mm thick 2nd class hard wood (two panel) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F flush shutters, 35 mm thick solid core construction with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F 35mm thick 2nd class hard wood factory made glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a), complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregates) for filling in the pressed steel door frame, hold fast, complete all as specified and directed.

S&F 150mm long aluminium, anodised barrel tower bolts of extruded section and fixed with SS screws, complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed with SS screws, complete all as specified and directed.

S&F 150mm long aluminium handle, cast type, oval shape, anodised and fixed with SS screws, complete all as specified and directed.

M&L for preparation of new wooden or untreated wood surfaces of any description, exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L for preparation of new steel and iron surfaces exceeding 10cm width or girth and applying two coats of synthetic enamel paint over preprimered surface, complete all as specified and directed.

S&F in replacement of vitreous china squatting pan, orissa pattern of size 580mm x 440mm, white with integral foot rests and 'P' or 'S' trap long body, fixed with cement concrete bedding, complete all as specified and directed.

S&F in replacement of wash down water closet (pedestal pattern) complete with pedestal pan and 'P' trap including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc, complete all as specified and directed.

S&F in replacement of chromium plated water jet to EWC with flexible pipe, suitable for 15mm bore of pipe and making connections, complete all as specified and directed.

S&F in replacement of 10 Ltr capacity PVC valveless syphonic action type flushing cistern, low level, white with inlet including bracket and 32mm dia flush pipe of polythylene ball valve, float and handleof low or high density and including 15mm dia PVC connection pipe of 450mm long, complete all as specified and directed.

S&F in replacement of viterous china wash basin, pedestral type, white, flat back, size 550mm x 400mm including waste couping CP of 32mm dia, chain and plug and porcelan stopper and CI brackets of angle iron 65x65x6mm, embedded in PCC block with PCC 1:2:4 type B-1 and including 450mm long PVC waste pipe of 32mm dia, getting with holes, complete all as specified and directed.

S&F in replacement of pillar tap, cast copper alloy with capstan heads handle, chromium plated, fancy type, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts, screwed for 15mm bore iron pipe connection, complete all as specified and directed.

S&F in replacement of PVC connection of 15mm dia with PTMT nuts of length 450mm, complete all as specified and directed.

M&L for preparation of new decorated surfaces of walls and applying two coats of distemper oil emulsion over a coat of 1-2mm thick wall care putty including complete removal of existing treatment, complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over one coat of primer, complete all as specified and directed.

Complete removal of existing treatment of old plastered surfaces of walls including prepration of surface and applying two coats of distemper oil emulsion over a coat of 1-2mm thick wall care putty including complete removal of existing treatment, complete all as specified and directed.

Complete removal of existing treatment including preparation of old ceiling surface and applying two coats of white wash, complete all as specified and directed.

Complete removal of existing treatment including preparation of surface and applying two coats of cement base paint over newly plastered surfaces of wall including one coat of primer, complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for re-fixing or removal to store, size of pipe 15mm bore, complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for re-fixing or removal to store, size of pipe 20mm bore, complete all as specified and directed.

M&L for 15mm bore medium grade galvanised tube with all fittings and fixed to walls (concealed type) and ceiling or laid in floors, complete all as specified and directed.

M&L for 20mm bore medium grade galvanised tube with all fittings and fixed to walls (concealed type) and ceiling or laid in floors, complete all as specified and directed.

S&F in replacement of angle valve, brass, chromium plated, fancy type, with capstan head handle, screwed down high pressure including CP brass wall flanges, screwed for 15mm bore pipe connection, complete all as specified and directed.

S&F in replacement of bib tap, long body, cast copper alloy, fancy type, chromium plated with crtuch or butterfly handle, screwed down high pressure, screwed for 15mm bore iron pipe or for brass ferrule, complete all as specified and directed.

S&F in replacement of bib tap, short body, cast copper alloy, fancy type, chromium plated with crtuch or butterfly handle, screwed down high pressure, screwed for 15mm bore iron pipe or for brass ferrule, complete all as specified and directed.

S&F 500 ltrs capacity rotational moulded polyethlene water storage tank (cylindrical vertical with closed top), hoisted and fixed in position including dismantling and remove of old tank from site, complete all as specified and directed.

S&F 1000 ltrs capacity rotational moulded polyethlene water storage tank (cylindrical vertical with closed top), hoisted and fixed in position including dismantling and remove of old tank from site, complete all as specified and directed.

S&F in replacement of ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for 20mm bore iron pipe (minimum weight 210 gms) including fixing of socket if required, complete all as specified and directed.

S&F in replacement of chromium plated towel ring, fixed with chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms), complete all as specified and directed.

S&F in replacement of vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe) but including urinal spreader with PVC connection of 15mm dia with PTMT nuts of length 450mm and PVC waste pipe of 32mm bore and CP waste coupling, complete all as specified and directed.

M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding and polishing with rounding to edges of stone slabs one edge complete, fixed over and including 20mm thick backing coat in CM 1:4, complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.63mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed.

S&F in repair of galvanised mild steel wire cloth 0.63mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed.

Providing and fixing 30mm thick factory made PVC door shutter consisting of panel of Hollow PVC Profile of 24mm thickness, consisting of frame made out of MS tubes of 19 gauge thickness and size of 19mm x 19mm inserted inside the hollow section of stiles, top and bottom rails and two 19mm x19mm MS tubes inserted horizontally inside the hollow profile section at an equal distance from top and bottom of door and fixed with hollow profile section using 3mm thick Prelam PVC sheet using screws. Hollow PVC profile shall be lipped with 10mm (5mmx2) thick x 24mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant Prelam PVC sheet using solvent cement on both the sides of the panel etc complete as per manufacturer's specification, drawing and directed by Engr-in-Charge.

S&F solid PVC door frame of size 50mm x 47mm, made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube in opening as per site, complete all as specified and directed.

S&F in repair 18mm thick prelaminated medium density fibre boards, glossy finish/ UV finish interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screw hinges or piano type (continues hinges) and welding as in cup boards, shelves, kitchen cabinet etc, complete all as specified and directed.

S&F hasp and staple, 100mm size, mild steel, safety type, stove enalmelled black including bolt to hinge plate and fixed with SS screws, complete all as specified and directed.

S&F mild steel cold rolled butt hinges, medium weight, 100mm long, complete all as specified and directed.

S&F continues (piano) type hinges, heavy weight, cold rolled and fixed with SS screws, size 30mm wide when opened, complete all as specified and directed.

Dismantling of boarding of any description, fixed in any position with nails, complete all as specified and directed.

S&F false ceiling with everest fiber cement designer tile lvory/ white painted (high pressure steam cured) of 4mm thickness (as per IS:14862) of size 595x595mm and any one of the design (occeanic, lake & hill cascade or electra) in true horizontal level, suspended on interlocking power coated certa black pattern metal grid of hot dipped galvanised steel section (galvanised @ 12gms both side inclusive) consisting of main 'T' runner with suitably spaced joint to get required length and 15x32mm made of 0.30mm sheet spaced between main 'T' @ 600mm C/C from a ridge of 600x600mm and wall angle of size 15x20mm made of 0.30mm thick sheet and laying false ceiling tile in the grid including required cuttig / making opening for service like diffuser grils light suspended from ciling using GI soffit cleats fixed to existing rafters purlin etc with dash fastener GI adjustable rod of 3mm dia with galvanised butterfly level clips spaced at 1200mm c/c along main T bottom exposed width of 15mm of all 'T' sections shall be centre black prepainted with polyester paint and having a load bearing capicity of 12 Kg/Sqm and refixed all existing electric wiring and fixture all complete all heights and as directed by Engineer-in-Charge.

S&F PVC wall lining, consisting of 5mm thick wood grain PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/ spring clips, complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed.

S&F 4mm thick figured glass, pin head type and glazing with oil putty in square in not exc 0.50 Sqm in each pane, complete all as specified and directed.

Dismantling of CGI/ AC or any others sheets of any description including ridges etc, complete all as specified and directed.

S&F 0.50mm thick prepainted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to walls, fixed with self tapping screws, complete all as specified and directed.

S&F 0.50mm thick prepainted galvalume aluminium zinc coating GI based plain steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to walls / ridges, fixed with self tapping screws, complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any decription not otherwise provided for, complete all as specified and directed.

M&L for mild steel work as in roof trusses (framed), trusses, purlins, cranes / ganttries, rails, fastering & heavy bracket, cleats (including distance plates, cleats etc), conforming to Fe-410 W (Gde-E-250 Quality-A), complete all as specified and directed.

S&F in replacement of 110mm bore PVC (SWR) pipes in any length with rubber ring joints, laid in floors/ trenches or fixed to walls with MS clamps of suitable size at any height, complete all as specified and directed. Note :- Rates for necessary scaffolding, ladder or other means shall be deemed to include in the quoted rates.

S&F in replacement of 75mm bore PVC (SWR) pipes in any length with rubber ring joints, fixed to walls with MS clamps of suitable size at any height, complete all as specified and directed. Note :- Rates for necessary scaffolding, ladder or other means shall be deemed to include in the quoted rates.

S&F in replacement of PVC (SWR) bends in any radius, suitable for 110mm bore pipes, complete all as specified and directed.

S&F in replacement of PVC (SWR) bends in any radius, suitable for 75mm bore pipes, complete all as specified and directed.

S&F in replacement of PVC (SWR) floor trap, plain with grating including jointing with solvent cement, suitable for 75mm bore pipes, complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on roof surfaces, finished the surface even and smooth without using extra cement, ccomplete all as specified and directed.

M&L for priming the roof surface with bitumenous primer @ 0.30 litres/Sqm and applying a coat of semi hot blown 85/25 grade bitumen @ 1.2 Kg/Sqm and thereafter supply and laying polymeric membrane, five layered, of weight not less than 3 Kg per Sqm with centre layer core of 90 micron high molecular density polyethylene film and bonded completely to the surface with overlap of 10cm (overlap to be thermo fused by flame) followed by another coat of semi hot blown 85/25 grade bitumen @ 0.70 Kg/Sqm blinded with fine sand in dry condition @ 0.50 Kg/Sqm including taking down existing membrane sheet including plastering, complete all as specified and directed.

M&L for preparation of roof, padding surfaces and applying two coats of aluminium paint, complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in floors, complete all as specified and directed.

M&L for machine pressed concrete interlocking paver blocks, glossy finish, any shape and size, confirming to IS:15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment, complete all as specified and directed.

M&L for hardcore of broken stone or boulders of gauge not exc 63mm, deposited spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for sand cushoning bed, filling under floors or paver blocks including spreading, levelling, watering if required, complete all as specified and directed.

S&F in replacement of shower rose, brass, chromium plated, 105/125mm dia with or without swivel joint with & including CP brass arm and wall flange, fixing to 15mm bore steel pipe or union, complete all as specified and directed.

S&F in replacement of CP decorative soap dish of any type, fixed to plugs with chrumium plated brass screws, complete all as specified and directed.

S&F sheet glass shelf assembly, consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

Dismantling of 100/75mm dia cast iron or reinforced concrtee drain pipes, jointed in cement mortar and taking out from trenches, complete all as specified and directed.

S&F 100mm bore cast iron spun soil, waste and vent pipes in any length with or without ears with cement joints, laid in trenches / floors or fixed to walls, complete all as specified and directed.

S&F 75mm bore cast iron spun soil, waste and vent pipes in any length with or without ears with cement joints, laid in trenches / floors or fixed to walls, complete all as specified and directed.

Dismantling of cast iron work of any description, complete all as specified and directed.

S&F in replacement of 75mm bore cast iron floor trap with grating including jointing to waste pipe, fixed in cement concrete 1:2:4 type B-1 of size 200mm x 200mm x 250mm, complete all as specified and directed.

S&F in replacement of stack clamps, made out of 50mm x 5mm flat iron and 16mm dia round iron stays including bolts, nuts and securing ends of stays to wall or roof, suitable for 100/110mm bore pipe, complete all as specified and directed.

S&F in replacement of stack clamps, made out of 50mm x 5mm flat iron and 16mm dia round iron stays including bolts, nuts and securing ends of stays to wall or roof, suitable for 75mm bore pipe, complete all as specified and directed.

S&F 75mm bore sand cast iron soil, waste and vent pipe in any length with or without ears with cement joint, fixed to walls with mild steel clamp of suitable size including taking down of existing pipe, complete all as specified and directed.

S&F 100mm bore sand cast iron soil, waste and vent pipe in any length with or without ears with cement joint, fixed to walls with mild steel clamp of suitable size including taking down of existing pipe, complete all as specified and directed.

S&F in replacement of 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, suitable for cast iron soil waste discharge pipe, complete all as specified and directed.

S&F in replacement of 75mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, suitable for cast iron soil waste discharge pipe, complete all as specified and directed.

S&F 100mm bore cast iron bend (any radius) with duck's foot or heel rest, complete all as specified and directed.

S&F 75mm bore cast iron bend (any radius) with duck's foot or heel rest, complete all as specified and directed.

S&F in replacement of drapery/ curtain rod of coloured aluminium anodised alloy of 25mm dia with fixing of domes with matching brackets, fenules etc, complete all as specified and directed.

S&F 125mm size aluminium handles,cast type, anodised, complete all as specified and directed.

S&F 300mm size MS helical door spring, welded to steel / fixed to wooden door frame including roller and roller plate etc complete of approved quality, complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm, complete all as specified and directed.

S&F magnet catcher for cub board with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified and directed.

S&F in replacement of peg set of three, chromium plated MS sheet including fixing with SS screws, complete all as specified and directed.

S&F in replacement of 25mm dia harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc, complete all as specified and directed.

Supply only liquid water proofing compound, complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc. and cutting chases for concealed water tubing etc and making good, cutting not exc 10cm girth,. complete all as specified and directed.

Disconnecting of existing water tank, setting aside (or lowering if required) for repairs, cleaning etc. and hoisting if required, reconnecting and refixing in position of capacity exc 250 litres but not exc 500 litres with polythelene float and fly nut complete, screwed down for iron pipe of 20mm bore, complete all as specified and directed. Note :- Cleaning and repairing shall be measured and paid separately under respective items of this BOQ.

Cleaning & removing all scale and dirt etc. from tank and from mouths of circulating pipes etc. of capacity exc 250 litres but not exc 500 litres with gunny bags, sand and cleaning with fresh water and bleaching powder, complete all as specified and directed.

S&F in replacement of toilet paper holder, brass, chromium plated, heavy duty, fixed with brass screws, complete all as specified and directed.

S&F in replacement of CP wall mixer with telephonic shower as approved, complete all as specified and directed.

S&F in replacement of single lever wall mixer, 3 in 1, telephonic type, brass, chromium plated, fancy type with capstan head handles with lettered 'hot' and 'cold', screwed down high pressure including CP brass wall flanges and necessary extension nipples, screwed for 15mm bore pipe connection with provision for both hand shower and over head shower, complete all as specified and directed.

S&F in replacement of centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy with dual capstan heads, chromium plated, screwed down high pressure with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore iron pipe connection, complete all as specified and directed.

S&F in replacement of health faucet, brass, chromium plated with 1 mtr long 15mm dia chrome finish flexible pipe with wall hook, complete all as specified and directed.

S&F in replacement of 20mm dia brass chromium plated tubular towel rails, 'D' type, 60cm long between flanges, fixed with SS screws, complete all as specified and directed.

M&L for preparation of old decorated surface of walls by scrapping down smoke shoots, moulds, moss and efflorscent salt, trading oil and greasy spots etc, complete all as specified and directed. Note :- The work will be carried out upto four storey bldgs and rates for necessary scaffolding shall be deemed to include in the quoted rates.

M&L for complete removal of existing treatment from wall surfaces by washing, rubbing down and stopping of distempered and including scrapping down smoke shoots, moulds, moss and efflorscent salt, trading oil and greasy spots and preparation of plastered surface, complete all as specified and directed. Note :- The work will be carried out upto four storey bldgs and rates for necessary scaffolding shall be deemed to include in the quoted rates.

M&L for preparation of old decorated surface of ceiling by scrapping down smoke shoots, moulds, moss, efflorscent salt, trading oil and greasy spots etc, complete all as specified and directed. Note :- The work will be carried out upto four storey bldgs and rates for necessary scaffolding shall be deemed to include in the quoted rates.

M&L for preparation of old surfaces of walls and applying one coat of white wash, complete all as specified and directed.

M&L for preparation of old surfaces of ceiling and applying one coat of white wash, complete all as specified and directed.

M&L for preparation of old surfaces of walls and applying one coat of oil bound distemper, complete all as specified and directed.

M&L for preparation of old surfaces of walls and applying two coats of oil bound distemper, complete all as specified and directed.

M&L for preparation of old surfaces of walls and applying one coat of cement base paint, complete all as specified and directed. Note :- The work will be carried out upto four storey bldgs and rates for necessary scaffolding shall be deemed to include in the quoted rates.

M&L for preparation of old surfaces of walls and applying two coats of cement base paint, complete all as specified and directed. Note :- The work will be carried out upto four storey bldgs and rates for necessary scaffolding shall be deemed to include in the quoted rates.

M&L for preparation of wall surfaces and applying 2-3mm thick wall care white putty to make the surface smooth, complete all as specified and directed.

M&L for preparation of wall surfaces of any description and applying one coat of weather proof exterior emulsion paint, complete all as specified and directed. Note :- The work will be carried out upto four storey bldgs and rates for necessary scaffolding shall be deemed to include in the quoted rates.

M&L for preparation of wall surfaces of any description and applying two coats of weather proof exterior emulsion paint, complete all as specified and directed. Note :- The work will be carried out upto four storey bldgs and rates for necessary scaffolding shall be deemed to include in the quoted rates.

M&L for preparation of old painted wooden surfaces of any description, exceeding 10cm width or girth and applying one coat of synthetic enamel paint of any colour as approved, complete all as specified and directed.

M&L for preparation of old or previously painted steel or iron surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint of any colour as approved, complete all as specified and directed.