REPAIR MAINT AND PAINTING TO STEEL FURNITURE AT AGE (I) AYODHYA CANTT

Amount

Notes applicable to all the Items of Schedule 'A' / BOQ :- (a) Removal of existing unserviceable components / parts of various MES F/DB/FD/TP/MAP furniture items shall be done carefully without disturbing the adjoining parts and new components / parts shall be supllied and fixed in lieu of dismantled components including tightening the joints, screwing, weldging, glueing, providing hinges, denting, placing every part in-tact as applicable as per drawing. (b) The work shall be executed where the furniture exists in different User Units under AGE(I) Ayodhya including BS Furniture Yard. (c) All the materials shall be got approved from Engineer-in-Charge / AGE (I) before procurement in bulk and incorporation in the work. (d) Credit for old unserviceable components / parts retrieved in replacement shall be recovered as per Schedule of Credit.

Table Office Officer Steel, Drawing No. FD-84/ 1003

S&F in replacement, legs, as per drawing

S&F in replacement, lock of drawer with duplicate Key as per drawing Make- Godrej, Hettich, Link

M&L for repairs to drawer/shutter by replacing old u/s parts with new parts including tinkering / denting, welding, etc all as shown on drawing and directed by Engr-in-Charge.

S&F in replacement, stiffeners as per drawing

S&F in replacement, PVC shoes of standard quality all as per drawing

M&L for welding in repairs to joints of table office officer steel as per drawing and as directed by Engr-in-Charge.

S&F in replacement, top 18 mm thick MDF board exterior grade (Gde-II, type-II) ISI marked of nmake Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply duly post - formed with 0.6 mm thick laminate in colour / shade as approved by Engr-in-Charge with 2 mm thick PVC edging of make-Rehau/Pegasus/Kynex fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drawing.

Table Office Clerk Steel, Drawing No. FD-84 / 381 / 1004

S&F in replacement, legs, as per drawing

S&F in replacement, lock of drawer with duplicate Key as per drawing Make- Godrej, Hettich, Link

M&L for repairs to drawer/shutter by replacing old u/s parts with new parts including tinkering / denting, welding, etc all as shown on drawing and directed by Engr-in-Charge.

S&F in replacement, stiffeners as per drawing

S&F in replacement, PVC shoes of standard quality all as per drawing

M&L for welding in repairs to joints of table office clerk steel as per drawing and as directed by Engr-in-Charge.

S&F in replacement, top 18 mm thick MDF board exterior grade (Gde-II, type-II) ISI marked of nmake Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply duly post - formed with 0.6 mm thick laminate in colour / shade as approved by Engr-in-Charge with 2 mm thick PVC edging of make-Rehau/Pegasus/Kynex fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drawing.

Almirah Large Steel with shelves or 1/2 H 1/2S, Drawing No. FD-351 / 1031/ 1033 /TP /MAP

S&F in replacement, Brass/Steel 6 lever locks with duplicate Key as per drawing Make- Godrej/Link/Hettich

S&F in replacement, chromium plated handle 130mm long as per drawing

S&F in replacement, legs made out of 1mm thick MS sheet duly painted with one coat of red oxide primer as per drawing

M&L for repairs to door including replacement of hinges as directed by Engr-in-Charge.

M&L for repair/adjustment to existing shelf including welding as per drawing

S&F in replacement, shutter/door as per drawing.

S&F in replacement, locking device complete including rod

S&F in replacement, shelf as per drawing

S&F in replacement, CP conduit pipe as per drawing

Almirah Medium / Small Steel, Drawing No. FD-1032/1034/350/104(M)

S&F in replacement, Brass/Steel 6 lever locks with duplicate Key as per drawing Make - Godrej / Link

S&F in replacement, chromium plated handle 130mm long as per drawing

S&F in replacement, legs made out of 1mm thick MS sheet duly painted with one coat of Red oxide primer as per drawing

S&F in replacement, repairs to door as specified including replacement of hinges

M&L for repair/adjustment to existing shelf including welding as per drawing

S&F in replacement, locking device complete including rod

S&F in replacement, shutter/door as per drawing.

S&F in replacement, shelf as per drawing

S&F in replacement, CP conduit pipe as per drawing

Teapoy Verandah, Drawing No. FD-383/255 & FD/E6/MAP/17

S&F in replacement, rubber/PVC shoe of standard quality as per drawing

S&F in replacement, top 18 mm thick MDF board exterior grade (Gde-II, type-II) ISI marked of nmake Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply duly post - formed with 0.6 mm thick laminate in colour / shade as approved by Engr-in-Charge with 2 mm thick PVC edging of make-Rehau/Pegasus/Kynex fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drawing.

S&F in replacement, flat iron/conduit section complete assembled set to be provided as per drawing.

Table 3'x2' with and w/o drawer & Table 3'x3', Drawing No. FD-1008/1007/1009

M&L for welding in repairs to joints of table of any type ans size as per drawing and as directed by Engr-in-charge.

S&F in replacement, top 18 mm thick of size 3'x2' made of MDF board exterior grade (Gde-II, type-II) ISI marked (Make - Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geen ply) duly post - formed with 0.6 mm thick laminate in colour/shade as approved by Engr-in-Charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex, fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drawing.

S&F in replacement, top 18 mm thick of size 3'x3' made of MDF board exterior grade (Gde-II, type-II) ISI marked (Make - Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geen ply) duly post - formed with 0.6 mm thick laminate in colour/shade as approved by Engr-in-Charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex, fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drawing.

M&L for repairs to Drawer by replacing old u/s parts with new parts including tinkering / denting, welding, etc all as shown on drwawing and directed by Engr-in-Charge.

S&F in replacement, rubber shoe of standard quality quality as per drawing

S&F in replacement, lock of drawer with duplicate Key as per drawing Make- Godrej, Hettich, Link

Chair Steel Tubular with Arms, Drawing No. FD-75(M)

S&F in replacement, 2nd class hard wood seat frame including cane work and two coats of synthetic enameled paint over a coat primer and putty and fitted in position by welding plate below the seat along with nut & bolt all as per drawing

S&F in replacement, 2nd class hard wood back frame including cane work and two coats of synthetic enameled paint over a coat primer and putty and fitted in position all as per drawing

S&F in replacement, PVC Arm rest as directed by Engr-in-Charge

S&F in replacement, rubber cap for conduit pipe as per drawing

M&L for welding in repairs to conduit pipe joints of chair steel tubular with arms as per drawing and as directed by Engr-in-charge.

Chair Steel Tubular without Arms, Drawing No. FD-75(M)

S&F in replacement, 2nd class hard wood seat frame including cane work and two coats of synthetic enameled paint over a coat primer and putty and fitted in position by welding plate below the seat along with nut & bolt all as per drawing

S&F in replacement, 2nd class hard wood back frame including cane work and two coats of synthetic enameled paint over a coat primer and putty and fitted in position all as per drawing

S&F in replacement, rubber cap for conduit pipe as per drawing

M&L for welding in repairs to conduit pipe joints of chair steel tubular w/o arms as per drawing and as directed by Engr-in-charge.

Chair Verandah, Drawing No. FD/E6/ MAP/11, FD/MAP-II/06, FD-359,256

S&F in replacement, any member of chair using MS conduit pipe 16G, 19mm dia as per drawing.

M&L for welding in repairs to conduit pipe joints of chair steel verandah as per drawing and as directed by Engr-in-charge.

S&F in replacement, Hard rubber shoes as per drawing

Removing old unserviceable PVC frame from chair verandah MAP and S&F new seating and back frame of chair verandah MAP as specified and directed by Engr-in-Charge

Removing old unserviceable cane from chair verandah & recaning with new approved plastic cane 4 mm wide half round as per Matt Pattern all as specified (colour of cane shall approved by Engr-in-Charge)

locker Steel, Drawing No. FD-1029/257 / SKD-562

S&F in replacement, chromium plated handle 130mm long as per drawing

S&F in replacement, Stainless steel Hasp & Staple as per drawing

repairs to door / sides including replacement of defective hinges & welding the joints joints complete all as shown on drawing.

S&F in replacement, shutter / door as per drawing.

S&F in replacement, legs made out of 1mm thick MS sheet duly painted with one coat of red oxide primer as per drawing

S&F in replacement, CP conduit pipe as per drawing

S&F in replacement, shelf as per drawing.

S&F in replacement, Brass/Steel 6 lever locks with duplicate Key as per drawing Make - Godrej/Link/Hettich

Bottom Drawer complete as per drawing.

S&F in replacement, locking device complete including rod and other device

Charpoy IP Ply top, Drawing No. FD/MAP-II/01

S&F in replacement, 12 mm thick plywood top BWP grade (Make-Century ply/Greenply /Archidply) as per existing shape and size with 8 Nos sunken nut & bolts, appropriate hole shall be made with elecrtic drill machine complete rest all as drawing and as directed

S&F in replacement, Hard rubber shoe of standard quality as per drawing

M&L for welding in repairs to joints of charpoy steel frame as per drawing and as directed by Engr-in-charge.

Charpoy GI pipe N/Niwar, Drawing No. FD-220

Replacement of old unsv Nylon newar from Charpoy GI Pipe, tightening of loose components of complete charpoy and S&F new plywood top 12mm thick BWP grade (Make: Greenply/ Centuryply / Archidply) ISI marked of required size, fixed with mild steel galvanised iron nuts & bolts of required size and suitable length, 12 mm x 6mm thick 1st class teak wood beading half round, the edges of the plywood to be rounded at corners, fixed with fevicol and headless nails, S&F three stiffeners 900 mm long made out of MS flat iron, 40x5 mm duly painted with two coats of black synthetic enamel paint over a coat of red oxide primer, fixed to long rails by drilling holes in flat iron and long rail with two Nos of semi circular top of 6mm dia 65mm long nut & bolts. 10 Nos nut & bolts with semi cirular top of 6mm dia and 65mm long with steel washers to be used (03 nos at each long rail, 02 nos at each short rail) and 06 nos nuts & bolts with semi circular top of 4 mm dia and 35 mm long with steel washers to be used (02 nos at each flat iron in between long rail) for fixing of plywood top complete all as directed by Engr-in-Charge.

Charpoy IP folding, Drawing No. FD-388(R )

S&F in replacement, 12 mm thick plywood top BWP grade (Make-Century ply/Greenply/ Archidply) as per existing shape and size with 10 Nos sunken nut & bolts, appropriate hole shall be made with elecrtic drill machine complete all as per drawing and as directed by Engr-in-Charge

S&F in replacement, Hard rubber shoe of standard quality as per drawing

M&L for welding in repairs to conduit pipe joints of charpoy IP folding as per drawing and as directed by Engr-in-charge.

Table Dinning OR A/top, Drawing No. FD-165(M)

S&F in replacement, top 18 mm thick MDF board exterior grade (Gde-II, type-II) ISI marked (Make - Action Tesa/Century Prowud from Century Ply/ Green Panelmax from Geenply) duly fixed with 1mm stainless steel sheet on table top all as specified and directed by Engr-in-Charge

S&F in replacement, Leg/Stiffener/short rail of MS 25mm square tube of 1.6mm thick complete all as specified and directed.

S&F in replacement, Long Rail/middle support complete all as specified and shown on drawing.

M&L for welding in repairs to joints of table dining steel frame as per drawing and as directed by Engr-in-charge.

Trestle Store Room, drawing No. FD-86(M)

Taking out old unsv leg from Trestle store room (wooden) and S&F new 2nd class hard wood SAL leg of secton size 100x100mm, made to shape including treating with two coats of creosote oil complete all as shown on drawing and directed by Engr-in-Charge.

Taking out old unsv long rail from Trestle store room and S&F new 2nd class hard wood SAL long rail of section size 2440x100x100mm, made to shape including treating with two coats of creosote oil complete all as shown on drawing and directed by Engr-in-Charge.

Taking out old unserviceable short rail from trestle store room and S&F new 2nd class hardwood SAL short rail of section size 600x100x100mm, made to shape including treating with two coats of creosote oil complete all as shown on drawing and directed by Engr-in-Charge.

Taking out old unserviceable long middle rail from trestle store room and S&F new 2nd class hardwood SAL long middle rail of section size 2040x100x100mm, made to shape including treating with two coats of creosote oil complete all as shown on drawing and directed by Engr-in-Charge.

Repair to Chair steel padded with Arm (TP), Drawing No. TP

Taking out old u/s Seat of Chair Steel Padded with arm and S&F new seat of size 450 mm x 450 mm, made of 12mm thick hot pressed plywood with PVC lipping all round and mouled polyurethene foam 40 Density cushion with cover, complete all as shown on drawing and directed by Engr-in-Charge.

All as per Srl item No. 17.01 but for back of chair steel padded with arm

Taking out old fabric from back and seat of the chair and S&F new fabric polyproplene /acrelic (range of fabrics not less than Rs 300/ Rm) complete all as shown on drawing and directed by Engr-in-Charge. Note : This work is separate from Srl item Nos 17.01 and 17.02

Taking out old unsv Padded arm hand rest of Chair Steel Padded with arm hand rest and S&F new Padded arm of size all as shown on drawing and as directed by Engr-in-Charge.

Welding:- M&L for Gas welding of mild steel pipe and flat iron frame joints of Chair steel padded with Arm including replacement of damaged part complete all as shown on drawing and directed by Engr-in-Charge.

Table Centre Brass Leg with Glass Drawing No. FD-375 :

Taking out old broken/unsv glass top of size 1200mm long and 600mm wide and S&F new Glass top for Table Centre brass leg with 10mm thick tinted glass (white colour) with corner rounded all as shown on drawing and directed by Engr-in-Charge.

Taking out old broken leg (complete Set including entire frame) and S&F new brass leg (complete Set including entire frame) all as shown on drawing and directed by Engr-in-Charge.

Taking out old broken / unsv Vaccum rubber shoes and S&F new Vaccum rubber shoes as shown on drawing.

Chair School with Hand Board, Drawing No. FD/E6/MAP/05 or similar FD drawing

S&F hand board of MDF Board as per drawing after removing the old one complete all as shown on drawing and directed by Engr-in-Charge.

S&F PVC Seat (As per sample held in furniture Yard) after removing the old one complete all as shown on drawing and directed by Engr-in-Charge.

Welding:- M&L for Gas welding of mild steel pipe and flat iron frame joints of Chair School with hand board including replacement of damaged part complete all as shown on drawing and directed by Engr-in-Charge.

Bed Hard Officer, Drawing No. FD/E6 /MAP/8(R) /TP

S&F 12 mm thick plywood top BWR grade (make-Century ply/ greenply /archid ply) as per existing shape and size with 8 Nos sunken nuts & bolts including drilling hole of appropriate size with elecrtic drill machine complete all as per drawing and as directed by Engr-in-Charge.

S&F Hard rubber shoe of standard quality as per drg

M&L for replacement of particle board exterior grade with 2 mm thick PVC beading for head rest / foot rest complete as per drg.

Table Bed Side Steel : FD/E6/MAP/15 (R)

M&L for replacement of drawer handles as per sample and shown on drawing.

M&L for replacement of sides (Three sides) 18 mm thick particle board exterior grade (action Tesa/Archidply/Century/Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by Engr-in-Charge /AGE (I) complete all as per drg.

M&L for replacement of top 18 mm thick particle board exterior grade (action Tesa/Archidply/Century/ Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/AGE (I) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on three sides with strong bonded chemical adhesive through hot pressed machine complete all as per drg.

M&L for replacement of Drawers made of 18 mm thick particle board exterior grade (action Tesa/Archidply/Century/ Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by Engr-in-Charge /AGE (I) with 2 mm thick PVC edging of make-Rehau/ Pegasus/ Kynex, fixed with strong bonded chemical adhesive through hot pressed machine and bottom shall be made of 9 mm thick prelaminated particle board exterior grade with standard quality channel (make-Ebco / Hettich / Ozone) complete as shown on drawing and directed by Engr-in-Charge.

S&F in replacement PVC rubber shoes of standard quality as shown on drawing.

M&L for welding in repairs to joints of table bed side steel as per drawing and as directed by Engr-in-charge.

M&L for preparing old / new steel surfaces of follwing steel furniture articles of MES pattern viz F/FD/DB/MAP by removing all dust, dirt, dents, existing paint etc on internal / external surfaces including making the surfaces smooth by applying oil paint putty complete and applying two coats of synthetic enamel paint of shade as approved by Engr-in-Charge /AGE (I) over a coat of primer using spray machine all as specified and directed by Engineer-in-Charge. Note : The work shall be executed where the furniture exists in different User Units/Md accns under AGE(I) Ayodhya including Furniture Yard as directed by Engineer-in-Charge

Table office officer steel, Drawing No. FD-84/ 1003

Table office clerk steel, Drawing No. FD-84 / 381 / 1004

Almirah steel large, Drawing No. FD-351 / 1031/1033/TP/MAP

Almirah steel medium/small, Drawing No. FD-1032/ 1034/ 350/ 104(M)

Teapoy verandah, Drawing No. FD-383/255 & FD/E6/MAP/17

Table 3'x2' with and w/o drawer & Table 3'x3', Drawing No. FD-1008/ 1007/ 1009

Chair steel tubular with and w/o arms, Drawing No. FD-75(M)

Chair verandah, Drawing No. FD/E6/MAP/11, FD/ MAP-II/06, FD-359, 256

Locker steel, Drawing No. FD-1029/257/SKD-562

Charpoy IP hard top, Drawing No. FD/MAP-II/01

Charpoy IP folding, Drawing No. FD-388 (R)

Table dinning OR A/top, Drawing No. FD-165(M)

Trestle store room, Drawing No. FD-86(M)

Chair steel padded with arm, Drawing No. TP

Bed hard officer Drawing No. FD/ E6 / MAP/ 8(R) /TP

Rack shoe steel

Rack steel any type/Book shelf open large, Drawing No. FD-1038 & 1023/69

Table bed side steel, Drawing No. FD/E6/MAP/15 (R)

M S Enterprises (BID ID -3251142)

UNIQUE FURNITURES SALES (BID ID -3251268)

Shivam Enterprises (BID ID -3247662)