Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.1 LAccepted-AOC | L1 | Accepted-AOC Being a L1 bidder. | |
| 2 | L2₹44.1 L+₹1.4 L (3.28%)Rejected-Finance 640 MAIN ROAD BABINA CANTT JHANSI UP 284401 | JHANSI | JHANSI | UP | 284401 | L2 | Rejected-Finance Other than
lowest
bidder |
Tender Value
₹49.5 L
EMD Value
₹99,000
Closing Date
23 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BABINA
GE BABINA CANTT 284401
PROVN OF CERTAIN SPECIAL REPAIR WORK AT AGE BRII AND AGE EM AT BABIBA
2023_MES_590327_1
8129/E8
Open Tender
Civil Works
Item Rate
180 days
GE BABINA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE BABINA
₹99,000
Yes
22 Jun 2023
19 Apr 2023
25 May 2023
19 Apr 2023
23 May 2023
4 May 2023
Amount
Dismantling timber scantling , framed /un framed work of 40 sq. cm and over in section in any position complete all as specified and as directed.
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-290 Gde E-165 complete all as specified and as directed.
S & F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts complete all as specified and as directed.
S and F of framed work as in doors orgates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.
M&L two coat synthetic enamel paint over one coat of red oxide primer on new steel surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed.
Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.
S&F painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Demolition of Brickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articlesl etc complete all as specified and as directed.
M&L brick work with fly ash bricks (FASB) conferming to IS 12894, of strength M-10 straight or curved on plan exc 6m mean radious built cement mortar 1:4 complete (on parapet wall) all as specified and as directed.
M & L Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar in (1:6) complete all as specified and as directed.
Taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc complete all as specified and as directed.
M&L for renderig 15mm thick in cement mortar 1:6 over fair faces of of brick or concrete surface of wall rendering is to be finished even and smooth without using extra cement complete all as specified and as directed.
M & L preparing of new surfaces and applying two coat of oil emulsion distemper on walls indluding 1mm thick putty complete all as specified and as directed.
M & L preparing surfaces of wall by complete removal of existing treament and applying two coat of oil emulsion distemper on walls complete all as specified and as directed.
M & L for complete removal of existing treament and applying two coat of cement base paint over a coat of alkali resistant priming paint on external surface complete all as specified and as directed.
M & L for preparing of new surfaces and applying two coat of cement base paint over a coat of alkali resistant priming paint on external surface complete all as specified and as directed.
M & L for a coat of JK/Birla wall care putty 1mm thick including preparation of surfaces complete all as specified and as directed.
Dismantling of wall and celling board ( fiber, pulp, insulation, etc.) or insulated boards/slabs/blankets any thickness, including cover fillets complete all as specified and as directed.
S&F of anodised aluminium snap grid frame work for false celing all as specified and hangers 6mm dia GI adjusting level fixed to roof slabs by means of celling cleats made out of GI flat 40mm X 3mm size 60mm long complete all as specified and as directed.
M&L for 4 mm thick high pressure steam cured non asbestos fiber cement designer board of size 600mm x 600mm with and including aluminium anodised snap grid frameas in ceiling complete all as specified and directed
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each etc complete as directed.
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm but not exe 4.0 Sqm each etc complete as directed.
S/F of 35mm thick 2nd class Hard wood paneled door shutter factory made (two panel) with lock rail and panel of 9mm thick BWP commercial ply wood, the size of rail and stile is as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F factory made fabricated 35 mm thick IInd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.20 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed
S & F butt hinges medium weight cold rolled, mild steel and fixed 100 mm size etc complete all as specified and directed
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and directed.
Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in CM 1:3 or cement conc 1:2:4 type B1 as required exc half brick but not exc full brick wall complete all as specified and directed.
S&F mild steel flat iron 25x3 mm as in hold fasts etc all as specified, Confirming to Fe 410-0 or Fe 310-0 complete all as specified and directed .
S&F aluminum handles cast type anodized 150 mm size etc complete all as specified and as directed
S&F, 150mm floor door stopper aluminium alloy body complete all as specified and directed.
S&F galvanized mild steel wire cloth 0.63 mm nominal dia of wire and avg width of a-pertare 1.40 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed.
M&L two coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed.
S & F in repair steel window with Z sections , side hung shutters including Box type hinges with steel handle peg stay, glazing bar, dovetailed or welded for recieving glass after and including taking out unserviceable steel window complete all as specified and directed.
S & F in repair steel window with Z sections , side hung shutters including Box type hinges with steel handle peg stay, without glazing bar, dovetailed or welded for recieving glass after and including taking out unserviceable steel window complete all as specified and directed.
S & F 3 mm thisk sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.50 sqm in each plane complete all as specified and directed.
M&L framed work as grills, gratings, etc with ends of bars shouldered and/ or riveted into spikes; or forged into spikes, framed guard bars; barred iron doors and similar work confirming to Fe 290. Gd-E-165 complete all as specified and directed.
Demolition of cement concrete (unreinforced )in ground floor and paving n,exc 15cm thickness below or above ground level) complete all as specified and as directed
M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified and directed.
M & L for Cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) under floorcomplete all as specified and directed.
M&L for cement concrete 1:3:6 type C1 ,using 20 mm graded crushed stone aggregates as in plinth protection/path laid in alternate panel , joint filled with bitumen 85/25 , surface finished even and smooth without using extra cement complete all as specified and as directed. Note : The cost of materials for forming and filling joints deemed to be included in the unit rate quoted by the tenderer.
Taking down old existing unserviceable HDPE water storage tank and of capacity n exc 500 ltrs etc complete all as specified and directed.
S&F 500 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) WHITE , ISI marked , Triple layered construction hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting etc complete all as specified in SSR Part -I 2009 complete all as specified and as directed.
S&F 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed in newly taken OHT (minimum weight 20mm 210 gm) complete all as specified and directed.
S&F in repair 20mm Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed
Taking down 15 mm bore steel tubing and connection including cleaning and refixing or removal to store etc complete all as specified and as directed.
Taking down 20 mm bore steel tubing and connection including cleaning and refixing or removal to store etc complete all as specified and as directed.
S&F 15 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete all as specified and as directed.
S&F 20 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete all as specified and as directed.
S&F in repair 15 mm bore stop valve (angle cock) cast copper alloy fancy type chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union and fixed complete all as specified and as directed.
S&F in repair 15mm bore bib taps cast copper alloy fancy type chromium plated screwed for iron pipe or for brass ferrule complete all as specified and as directed
S&F in repair 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed
S and F in repair of Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) in repair including Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S&F in repair vitreous china wash hand basin, white flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets, 32mm dia brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and as directed . Note: pillar tap shall be measured as supply only under respective items
S&F in repair stainless steel sink with drainage board 1.00mm thick for kitchen or laboretory with plug, waste pipe, coupling, washers also incl cantilever cast iron brackets connecting union etc, overall size 915x460mm with bowl size 410x330x160mm complete all as specified and directed.
S&F in repair 125 mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing of steel pipe or union and fixed complete all as specified and directed.
S&F in repairs 15mm dia Concealed stop Cock regular body 15mm with flange complete all as specified and as directed.
S&F in repair PVC connection 15mm dia and 450mm long with both ends brass fly nut complete all as specified and as directed (Make Prayag/Polytuf)
S&F brass CP mixer 15mm dia bore mixing hot & cold water for wash hand basin screwed down for iron pipe and fixed complete all as specified and directed.
S&F PVC floor trap size 75mm dia out let with grating including connection to waste pipe with cement jointing complete all as specified and directed
S&F PVC (SWR) pipes 75mm dia single sockted in any length with rubber ring joints laid in trenches complete all as specified and directed.
S&F PVC (SWR) bends 75 mm bore of any radius complete all as specified and directed.
S&F PVC (SWR) junction single, (single T) equal or unequal 75 mm bore complete all as specified and directed.
S&F PVC (SWR) pipes 110mm dia single sockted in any length with rubber ring joints laid in trenches complete all as specified and directed.
S&F PVC (SWR) pipes 110mm dia single sockted in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F PVC (SWR) bends 110 mm bore of any radius complete all as specified and directed.
S&F PVC (SWR) junction single, (single T) equal or unequal 110 mm bore complete all as specified and directed.
S&F PVC (SWR) vent cowl 110 mm complete all as specified and directed.
S and F of Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed.
S and F of Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms) complete all as specified and directed.
S & F in repair of Towel rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed.
S and F of Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms) complete all as specified and directed.
Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth for sewage line, manhole etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and as directed.
Returning, filling in, including spreading, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and as directed.
Removing excavated material to a distance n exc 50M and deposited where directed at a level n. exc 1.5M above the starting point complete all as specified and as directed.
M&L for 150mm internal dia Salt-glazed stoneware drain pipes laid in trenches and joints complete all as specified and directed.
M&L PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) concrete bedding to drain pipe including forming cradles under of pipe for 100mm bore complete all as specified and directed.
M&L non skid ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in colour cement to match as in floor including 15 thick cement mortar screed bed 1:4 complete all as specified and as directed
M&L glazed ceramic colour tiles 300mmx200mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado including 10 mm thick rendering/screeding in cement mortar 1:4, complete all as specified and directed
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick in CM(1:6) etc complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail,paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as directed and specified by Engineer-in-Charge.
S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube etc complete all as specified and directed.
S&F 100 mm butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21complete all as specified and directed.
Dismantling structral steel work including doors, gates but excluding framed truss etc complete all as specified and directed.
M & L for Providing, precast cement concrete type B1- (1:2:4) using 20 mm graded aggt in window or door lintels, bressummers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in mortar complete with joints to match and set in CM (1:4) and all other as directed by engineer in charge.
M and L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders
M&L brick work with fly ash bricks (FASB) conferming to IS 12894, of strength M-10 straight or curved on plan exc 6m mean radious built cement mortar 1:4 complete all as specified and as directed.
M&L renderig 5mm thick in cement mortar 1:4 on ceiling surface and finished even and smooth with out using extra complete all as specified and as directed.
M&L for complete removal of existing treament on ceiling and applying two coat of white wash all as specified and as directed.
M&L for 40mm thick PCC type B-0, 1:2:4 (12.5mm graded aggregate) as in floor laid in alternate panel, panel formed by glass strip with surface finished even and smooth with using extra cement all as directed and specified. Note : Glass strips shall be paid as supply only.
Supply only Glass dividing strips, 3mm thick, 38mm width and inserted in position, conform to design as in floor all as directed and specified.
Taking down shutters of any description n.exc 1 sqm each removal to store complete all as specified and directed.
Taking down shutters of any description exc 1 sqm but n.exc 2 Sqm each removal to store and Refixing in same opening including cutting to size and fittings with good surfaces conditions and etc complete all as specified and as directed.
Dismantling/demolition of existing water tanks of steel /PVC/RCC of capacity exceeding 500 liters but not exceeding 1000 litres complete all as specified and as directed.
S & F 1000litre capacity of rotational moulded polyethylene water storage tank multilayered construction, ISI marked of make specified (cylindrical vertical with closed top) hoisted and fixed in position including S & F 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified in SSR Part-I complete all as specified and as directed.
Dismantling floor hearth wall tiling including cement mortar bedding but not backing removing serviceable meterial to store complete all as specified and directed.
M&L for coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor, over and including 15mm thick screed bed or bedding layer in cementy mortar 1:6, over 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) etc complete all as specified and directed.
M&L for coloured joint free ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in skirting/dado etc. set and jointed in neat cement slurry and pointed in colour cement to match to floor, over and incl 10mm thick rendering on wall or conc surfaces in cement mortar 1:4 ,complete all as specified and as directed.
M&L for glazed coloured ceramic tiles 300x600x7mm thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match the existing wall surfaces, over and incl 10mm thick rendering in cement mortar 1:4 etc complete all as specified and directed.
S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floor and taking down old PVC /CI/Concrete pipe complete all as specified and directed.
S&F PVC (SWR) bends any radius 110 mm bore complete all as specified and directed.
S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.
S&F in repair floor trap size 75mm dia out let with grating including connection to waste pipe with cement jointing including taking down existing trap complete all as specified and directed.
Rounding to edges of stone slabs one edge, such as in stair steps, cooking platform, and other similar situations etc complete all as specified and directed.
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or or laboratory with plug washers and waste pipe including bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe over all size 495mm x 420mm bowl size 410mm x 330 mm x 160mm. and to be fixed with granite or surface with proper gradient for wash out of water all as specified and directed.
S&F Pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and directed.
S&F Pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc.complete all as specified and directed.
S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and directed.
S&F butt hinges medium weight cold rolled, mild steel and fixed 100mm size etc complete all as specified and directed.
S&F aluminium anodised barrel tower bolts of extruded section and fixed fixed 200 mm long etc complete all as specified and directed.
S&F aluminum handles cast type anodized 150 mm size etc complete all as specified and directed.
S&F mild steel, 300 mm ordinary door spring including roller and roller plate etc complete all as specified and directed.
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and directed.
M&L Preparation on old wooden surface and applying One coat synthetic enamel paint of any description not otherwise described over 10 cm width or girth etc complete all as specified and directed.
S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and avg width of aperture 1.18 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and directed.
S&F 18mm thick Rajshri Celuka ply of grade 1 quality of one side pre-laminated & other side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet /shutters incl taking down old wooden partical boards complete all as per specifications and as directed by the Engr-in-Charge.
S&F 12mm thick Rajshri Celuka ply of grade 1 quality of both side plain white colour fixed with screws, solvent cement/adhesive to make wall mounted kitchen cabinet sides back & pull out shelves inside the cabinets complete all as per specifications and as directed by the Engr-in-Charge
S&F in repair continuous piano hinge mild steel 30 mm width flap when open mild steel , bright finish or electrogalvanised complete all as specified and directed.
S&F Hasp & staple safety type aluminium anodized with mild steel hing pin incl bolt to hing plate and fixed with screws 100mm size etc complete all as specified and directed.
S&F auto closing hinges 35mm of 0 crank (KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters, complete all as specified and directed.
S&F stainless steel handles 100mm size for kitchen cabinet shutters complete all as specified and directed.
M&L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed.
Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.
M&L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in copping or roof kerbs on roof chamfered on edge including troweling slightly complete all as specified and as directed.
M&L 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is stil green finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and as directed. Note :- Water proofing compound shall be measured separately as supply only in item no 126
Supply only integral water proofing compound complete all as specified and as directed.
M&L One coat of bituminous based primer conforming to IS-3384-1965 @ 0.3 Kg/Sqm to be applied on prepared surface, till the surface is properly impregnated complete all as specified and directed.
M&L for APP based membrane minimum weight 3kg/Sqmand minimum 3mm thickreinforced with non woven fabric (wt not less than 150gm/Sqm) laid on primed surfaces of roof top complete all as specified and as directed.
M&L for preparing of APP membrane surfcases of any description, not otherwise described and applying two coats of synthetic Aluminium paint on APP membrane surface on roof top complete all as specified and as directed.
S&F figured glass ,pin head type 3mm thick and glazing with oil putty in square n.exc 0.5sqm in each pane complete all as specified and as directed.
S&F powder coated aluminium sliding windows with fly proof shutters having top rail of section 41mmx20mmx1.6mm thick, bottom rail of section 41x20x1.6mm thick ,vertical style of section 38x20x1.6mm thick including necessery jointing cleats ,glazing clips, rubber packing ,snap beading, screws handle and locking system etc, fitted including usingg standard aluminium section including necessery fittings and fixtures complete all as specified and directed.
S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.
S&F framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders ; framed balusters; walk ways; railings; framework of watertanks and similar work conforming to Fe 290. Gde-E-165 complete all as specified and as directed.
S&F Sheet glass 4.8mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and as directed.
S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
S&F in repairs vitreous china squatting pan 'ORISSA PATTERN' size 580mm x 440mm 'white with integral foot rest (excluding flushing cistern and flush pipe ) with 'P' or 'S' trap, front or back inlet including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed.
S&F Vitreous China Ware Wash hand basin white, flat back, size 450 x 300 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand and waste pipe complete all as specified and as directed.
S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed
S&F PVC connection 15mm dia with Brass nuts of length 450mm etc complete all as specified and as directed.
Supply only 15mm dia bore pillar tap cast copper alloy, wih capstan heads, chromium plated , screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shank and flynust, screwed for iron pipe and fixed complete all as specified and as directed
S&F in repair 15 mm bore angle cock long thread fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete all as specified and as directed.
S&F in repair 15 mm bore stop cock long thread (concealed type) fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete all as specified and as directed.
S&F in repair 125 mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing of steel pipe or union complete all as specified and as directed.
S&F in repair 15 mm bore bib taps long body chromium plated fancy type, cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe or for unions and fixed 15 mm bore etc complete all as specified and as directed.
Demolition and breaking 150mm dia drain pipe (salt glazed stoneware) set in cement mortar including packing under and haunching against side of pipe complete all as specified and as directed.
M&L for 150mm bore reinforcement concrete pipes, Class NP-3 laid and laid jointed complete with collers complete all as specified and as directed.
M&L cement concrete bed to 150mm dia drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate complete all as specified and as directed.
M & L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation, filling and mass conc. etc complete all as specified and directed.
M&L for brick work with sub class B brick straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks old size straight or curved on plan exc 6 M radius built in cement mortar (1:4) but EXCEPT BRICKS etc complete all as specified and as directed
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc. all as specified and directed.
Add for Extra for forming fair finished drain or channel 30 cm to 45 cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc. all as specified and directed.
M & L rendering15mm thick in cement mortar 1:4 on fair surfaces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L Precast Cement Concrete 1:2:4 type B1 (using 20mm graded stone agg) as in but in landings, cover slabs (for manholes, drain cover etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face set in CM 1:6 all as directed and specified.
Surface excavation n.exc 30 cm deep and averaging 15 cm in deep and getting out in soft/loose complete all as specified and as directed.
M&L Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
M&L for 100mm thick PCC 1:4:8 type D-2 (40mm graded stone aggregate) in Sub floors, Sub base, floors and paving etc acomplete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 grade and fixed with grey cement and Coloured pigment over and including 50 mm thick sand cussion complete all as specified and directed.
M&L Chequered cement concrete with Glossy tiles 30cm x 30cm x 25mm thick, set, jointed with grey cement and Coloured pigments and pointed in near cement slurry in floors over 15mm CM (1:6) thick screed bedding specified and directed by Engr-In-Charge.
M&L for reinforced concrete hume pipes 300mm dia bore, NP2 class, laid in trenches and jointed complete with coller etc including testing on completion complete all as specified and as directed.
Taking down carefully unserviceable aluminium point wiring (light, fan, socket or power) complete with fitting such as switches, ceiling roses, lamp holders, sockets, fan regulators, wooden terminal box plastic laminated sheet cover from TW battens including TW batten or drawing from existing conduit removing including TW batten all as specified and as directed by Engr-in-Charge.
Taking down carefully existing wooden board , Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size any capacity from boards complete all as specified and as directed.
Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed.
M & L for concealed point wiring for one light point controlled by one switch complete with PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, clip, with MS terminal boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dolly with 3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed .
Description same as per item No 167 above but one fan point controlled by one switch & regulator.
Description same as per item No 167 above but One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.
Description same as per item No 167 above but One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.
Description all as per item No 167 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.
S&F switch piano flush button type 5 Amp single pole one way complete all as specified and as directed.
S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and as directed.
S&F switch piano flush button type 15 Amp single pole one way complete all as specified and as directed.
S&F socket outlet 2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and as directed.
S&F ceiling rose,surface bakelite 63 x50mm three terminals complete all as specified and as directed.
S & F Sheet metal enclosure double door concealed suitable for distribution board when MCB to be used having 100 Amp rated bus bar 8 ways 240 volts complete all as specified and as directed.
S&F MCB single pole and neutral 40 Amp/63 Amp 240 V ,10KA , 'C' series, connected with copper lugs complete all as specified and as directed.
S&F storage type water heater (Geyser), 230Volts, AC, 25Ltrs capacity with minimum 5 Star rating energy efficient comprising polycarbonate body steel inner tank, suitable heating element. Thermostate with adjustable temperature setting 0-90degree centigrade, indication lamps, provition of inlet outlet and air vent connection and NRV, PVC connection 15mm size, heavy duty with brass nuts, 450mm long, mounted on wall surfaces including all fixing arrangement such as fastner bolts, nuts, washers etc complete including making good disturbed wall surfaces matching with the existing surfaces and finishing complete all as specified and as directed.
S&F storage type water heater (Geyser), 230Volts, AC, 50Ltrs capacity with minimum 5 Star rating energy efficient comprising polycarbonate body steel inner tank, suitable heating element. Thermostate with adjustable temperature setting 0-90degree centigrade, indication lamps, provition of inlet outlet and air vent connection and NRV, PVC connection 15mm size, heavy duty with brass nuts, 450mm long, mounted on wall surfaces including all fixing arrangement such as fastner bolts, nuts, washers etc complete including making good disturbed wall surfaces matching with the existing surfaces and finishing complete all as specified and as directed.
S&F ceiling fan complete with blades, down rods, electronic regulator and accessories, 230V, 1200mm sweep. Minimum air delivery 210CFM with service value 6.00BEE. Five star rated with squirrel cage induction motor, copper binding complete all as specified and as directed.
S&F exhaust fan, copper binding, steel body AC, Single Phase, 230V of size 300mm sweep with blades and frame and louvers complete all as specified and as directed.
S&F exhaust fan, copper binding, steel body AC, Single Phase, 230V of size 450mm sweep with blades and frame and louvers complete all as specified and as directed.
S&F exhaust fan, copper binding, steel body AC, Single Phase, 230V of size 225 to 230mm sweep with blades and frame and louvers complete all as specified and as directed.
S&F exhaust fan, copper binding, steel body AC, Single Phase, 230V of size 375/380mm sweep with blades and frame and louvers complete all as specified and as directed.
S&F MCB single pole 6 to 32Amps 240 V,10KA, 'C' series, connected with copper lugs complete all as specified and as directed.
S&F MCCB 4 pole, 415V, AC , 3 phase, 50 HZ, breaking capacity 16 KA with fixed thermal and fixed magnetic setting of capacity 100 Amps 'C' series complete all as specified and as directed.
S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittings complete all as specified as directed
S & F delux Fan Regulator electronic rotary, step type 240 Volt 50 Hz, complete all as specified as directed.
S&F LED security/street light fittings1x35W LED 5700K energy saving and envoiremental frendly long life versatile pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK 07 luminaire with high power LED as light siurce and electronic driver suitable for pole dia 35mm including 35mm dia light grade tube bracket, bend to shape 1.80m long with two numbers clamp of size 50mmx6mm with nuts, bolts, washers etc including connection with 1.5Sqmm two single core PVC insulated and PVC sheathed cable stranded copper conductor upto ceiling rose and fixing on wall /pole complete as ditrected by Engineer in Charge. Make: Bajaj Cat Part No BRLEP20WLEDWH or equivalent make as specified in Appendix B to particular specification.
S & F 9W/10W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. Make C&S Cat No LTHPLEDLAMP7W/B22 or equivalent make as specified in Appndx 'B' to PS .
M&L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLS, 1100 Volts grade cable drawn into conduit (Existing / new) including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 6 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete all as specified and as directed Note:- (a) Two runs of 6 sqmm cable and one run of 6 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) New conduit and conduit accossories shall be measured separately.
Supply and fixing in repair 20W LED 6000k Decorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 28watts lamp fitted including wiring upto and terminal into ceiling rose complete all as specified and directed by Engr-in- Charge.
Supply,laying connecting and testing in replacement of cable XLPE insulated,screened,PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 V grade with multi stranded aluminium conductor of size 10 sqmm 4 core as per IS 7092 Pt-I complete all as specified and as directed.
S&F TPN DB-DPX 125 MCCB DBs 4 way single door with provision for DPX 125 MCCB and as incomer and SP/TP MCBs as outgoing Nos of modules DPX 125+12, including 125 Amp MCCB complete all as specified and directed.
M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.
M/s Ravi Traders
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .