Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Rejected-Technical | Rejected-Technical Documnet not submitted as per tender terms and condition, hnece disqulified. |
Tender Value
₹11.2 L
EMD Value
₹22,331
Closing Date
29 Jul 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Exe.,Engg., PWD, WD-II, Diu.
The Multi Office Complex, PWD, 2nd Floor, Near Moti Daman Market, Moti Daman.
Addition, Alteration, Construction of additional Room and other allied works at D type quarters, Near old TTI, Fort Area, Moti Daman. (E-30172)
2022_DAMAN_2325_1
Tender Notice No.49/02/2022-23
Open Tender
Civil Works
Works
60 days
Daman District.
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
The Exe.,Engg., PWD, WD-I, Daman.
₹22,331
25 Aug 2022
21 Jul 2022
29 Jul 2022
21 Jul 2022
29 Jul 2022
21 Jul 2022
Amount
Civil work
Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(B) Dense or Hard soil.
Providing and filling in foundation & plinth with Rubble filling in layer of 20 cm thickness including watering, ramming and consolidating etc. comp.
Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6- crushed stone aggregates 20 mm nominal size) and curing complete including cost of formwork in (A) Wall Caps / Coping .
Providing and laying controlled cement concrete M.250 exposed work with curing etc. complete including the cost of formwork but excluding the cost of reinforcement for R.C.C. work in Superstructure.
Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level .
Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional.Extra for brick work in superstructure above plinth level upto floor two level (B) Conventional .
20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.
Providing 15 mm thick cement plaster by using Ready Mix Mortar for plaster in single coat on rough (similar) side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in Cement mortar 1:6 (1 Cement : 6 sand)
Demolition and disposal of unserviceable materials with all lead and lift.(i) Cement concrete.
P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for antiskit .
Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry.
Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07 Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of horizontal member size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass/SS mosquito net of approved gauge as per the requirement with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc .
Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm(of Jindal Section no:4605, @ Wt 1.094Kg / Rmt with colour anodized alluminium frame with 5 mm thick transparent bronze colour tinted float glass with colour anodized alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for.window.
Providing and fixing Door with 35mm chill wood flush door, 1.0mm laminate on both side, teak wood pati on all four side, ss hinges. mortise lock, stopper, fixing with screw fevicol, nail etc complete as directed by engineer in charge.
Providing and fixing FRP frame size 125x65 mm and 35mm thick FRP shutter with wood grain raised panneled design finish shutter having extra reinforcement on sides & edges in Gel coat finish. The core of the shutter & frame is to be filed up with injected polyurethene foam done in situ alongwith embedded wooden pieces for stiffening & also taking hinges & fintures. The whole FRP frame & shutter is to be water proof weather proof, termite proof & resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges with fastener sleeve & alluminium fixtures & fastenings.
Applying two coats of Birla (white cement based) or Asian (acrylic lapy- putty) or equivalent & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.
Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth.
Finishing wall with weather proof exterior emulsion paint of Asian Apex or equivalent on wall surface (two coats) and priming coat as per the requirement to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials etc. complete as directed.
Providing and applying Asian or Equivalent make Damp proof weather coat paint two or more coats and priming coat wherever required including cleaning and scraping the surface etc. complete as directed.
Providing asbestos cement sheets roofing fixed with G.I. plain and bitumen washers complete excl. the cost of purlins rafter and trusses. Corrugated sheet. 6 mm thick.
Providing and fixing 18 mm thick granite (Telephonic black only) gang saw cut,mirror polished, premoulded and prepolished,machine cut for kitchen platforms,vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
Providing and fixing one piece wall hung integrated W.C pan of jaquar, hindware or equivalent company with complete unit of flush tank, seat cover, bracket etc. including all fittings etc. complete as directed by Engineer in charge.
Providing and fixing 3 in 1 Mixure cock of Jaquar or its equivalent of approved design , pattern and series etc. as directed.
Providing and fixing vitreous china pedestal type / table top wash basin of varmora, Hindware, Jaquar or equivalent etc. complete as per the approved design , pattern and series as directed by Engineer in charge.
Providing and fixing stop cock of Cera or equipvalent make as per the approved design , pattern and series as directed by Engineer in charge.
Providing and fixing 2 in 1 Bib cock of Jaquar or its equivalent as directed.
Providing & fixing Shower minimum (6 " x 6 " size), including attached rod of Jaguar, Parryware, Cera or equivalent make as directed by Engineer in Charge.
Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the following nominal diameter of self cleansing design with C.I scread down or hinged grating including the cost of cutting and making good the walls.
Providing and fixing piller cock with provision of wall mixer for hot/cold water of Jaquar or equivalent etc. complete as per the approved design , pattern and series as directed by Engineer in charge.
Providing & Fixing Sink cock of Jaguar or equivalent make, fixing to platform in sandwitch style etc. complete as directed by engineer in charge.
Providing & Fixing Bath Room Accessories set like Napkin Ring, Towel Rod , Brush Holder , Soap Disc etc. As directed by Engineer - in -charge.
Providing and Fixing Health Fauset Heavy duty with hook with fittings etc. as directed.
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.[A] 15 mm.
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [C] 25 mm.
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [F] 50mm.
Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(F) 75mm .
Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(G)110 mm .
Providing and fixing Curtain Rod with Curtain Socket of standard approved make, design and material as directed.
Providing and applying 20 mm plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including scaffolding curing etc. complete with applying SBR 301URP latex chemical of standard quantity, including filling of cracks etc as directed by Engineer in charge.
Polishing with new/old wood and wood based surface to give an even surface including cleaning, the surface of all dirt, dust and sand papering smooth and including a coat of wood filler etc as directed.
Painting two coats on new steel and other wooden surface with enamel paint, brushing, interior to give an even shade including cleaning the surface an even shade including cleaning the surface of all dirt, dust and other foreign matter.
Providing and fixing mirror (size of minimum 1m x 1m) of standard quality including providing back support, adhesives etc with necessary moulding etc. whereever required , complete as directed.
Providing Material, Labour and equipments for Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge......
Steel work, riveted in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. (A) In beams and joists, channels angles Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the like.
AMIN M HASNANI
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .