ETC.NO.16(25-26)

Amount

Dismantling /Demolishing the following worn out items of the existing building and disposing them as directed by the Board Engineer in charge including cost of hire charges of required machineries, labour, lead, lift, transporting of items to be devoluted to the department stores etc., complete.

Demolishing Floor Finish, Floor tiles & Dadooing walls in cement mortar

Doors and Windows including removal of frames, hinges and fastenings

Dismantling and removal of pressed tiles from the open terrace

Earth work excavating and HGS SS.20.B. Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stony earth and earth mixed with small size boulders SS.20B as directed by Board Engineer in charge including cost of hire charges of required machineries, labour, lead, lift, etc., complete.

Supplying and filling the basement with 'M' sand for foundation and basement including watering, consolidation etc. as directed by Board Engineer in charge including cost of all materials, labour, lead, lift, etc., complete.

Providing foundation P.C.C 1:4:8 by using 40mm HBG stone as directed by Board Engineer in charge including cost of all materials, labour, lead, lift, etc., complete.

Brick work in CM 1:5 using II nd class country bricks for ground floor wall as directed by Board Engineer in charge including cost of all materials, labour, scaffolding charges, lead, lift, etc., complete.

Plastering with cement mortar 1:4, 12mm thick with water proof compound 1 kg per bag of cement etc., as directed by Board Engineer in charge including cost of all materials, labour, scaffolding charges lead, lift, etc., complete.

White washing two coats using white cement of ISI make as directed by Board Engineer in charge including cost of all materials, labour, brushes, lead, lift, scaffolding charges, curing etc., complete.

Painting with interior emulsion two coats over one coat primer of all available with ISI make/ best approved quality (in case ISI make not available) as directed by Board Engineer in charge including of all materials , scaffolding charges, labour, lead, lift etc., complete.

Painting with exterior emulsion two coats over one coat primer of all available with ISI make/ best approved quality (in case ISI make not available) as directed by Board Engineer in charge including of all materials, scaffolding charges, labour, lead, lift etc., complete

Supplying and fixing of coloured wash hand basin of size 550mm x 400mm with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require as directed by Board Engineer in charge including cost of all materials, labour lead, lift, etc., complete.

Supplying, and fixing the following sizes of PVC water line (10 kg/ Sq.cm) with necessary specials of all available with ISI make / best approved quality (in case ISI make not available) including fixing to wall with necessary clamps and screws, making holes on the wall or drilling holes in roof, packing the holes with necessary brick work and plastering wherever necessary, with necessary scaffolding, as directed by Board Engineer in charge including cost of all materials, labour, lead, lift, etc , complete.

50 mm P.V.C water line below ground level

Supplying and fixing of 50 mm, 40mm, 32mm,& 25 mm heavy duty gun metal gate valve/ ball valve of all available with ISI make / best approved quality (in case ISI make not available ) as directed by Board Engineer in charge including cost of all materials, labour, lead, lift, etc, complete.

50mm heavy duty gun metal valve

40mm heavy duty gun metal valve

32 mm heavy duty gun metal valve

25 mm heavy duty gun metal valve

Supplying, aligning and fixing of 110 mm PVC sewer line (6 kg/ Sq.cm) with necessary specials including fixing to wall with necessary clamps and screws, making holes on the wall or drilling holes in roof, packing the holes with necessary brick work and plastering wherever necessary, with necessary scaffoldings directed by Board Engineer in charge including cost of all materials, labour, T&Ps, lead, lift, etc, complete.

Supplying and fixing of 110 mm PVC rain water pipe (4 kg/ Sq.cm) with necessary specials of all available with ISI make / best approved quality (in case ISI make not available) including fixing to wall with necessary clamps and screws, with necessary scaffolding, as directed by Board Engineer in charge including cost of all materials, labour, lead, lift, etc, complete.

Labour wrought and put up in position Shutters for glazed and panelled doors including labour charges for fixing furniture fittings complying with standard drawings and standard specification as directed by Board Engineer in charge including cost of all materials, labour, lead, lift, etc, complete

FRP Door Sutter with FRP Door Frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and Solid Core FRP Shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., of sizes specified by Engineers (1.0 MX2.10M)

Supplying, fitting and fixing PVC / Fibre Glass Framed 5.5mm thick Mirror, Shelf Type with Hard Board Backing of size 600 mm X 450 mm as directed by Board Engineer in charge including cost of materials, all leads, lifts, labours for fixing in position etc., complete.

Wiring with 2x1.5 Sq.mm PVC insulated SC unsheathed Copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box and 5 Amps F.T.switch of all available with ISI make / best approved quality (in case ISI make not available) with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC light point/Fan Point as directed by Board Engineer in charge including cost of all materials, labour, lead, lift, etc., complete.

Wiring with 2 x 1.5 sq.mm. (22/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box in flush with wall with 3mm thick hylem sheet cover for 5Amps 3 pin non inter locking wall socket with 5A flush type switch of all available with ISI make / best approved quality ( in case ISI make not available ) with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point as directed by Board Engineer in charge including cost of all materials, labour, lead, lift, etc., complete.

Dadooing with Ceramic Tiles of size 300mm x 450mm x 8mm and pointing the joints with same colour cement/powder of all available with ISI make / best approved quality (in case ISI make not available ) over CM 1:3, 12mm thick as directed by Board Engineer in charge including cost of all materials, labour, scaffolding charges, lead, lift, etc., complete.

Flooring with Non slip Ceramic tiles of of size 305 x 305 x 6 mm of all available with ISI make / best approved quality (in case ISI make not available) over the cement mortar 1:3, 20mm. thick and pointing with same colour cement / powder for toilet flooring as directed by Board Engineer in charge including cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing in position of white colour European Water Closet with “P” or “S” Trap with Double Flapped Seat and Seat Cover with Brass Hinges and 12.5 litre capacity Porcelain Low Level Flushing Tank with all internal fittings as directed by Board Engineer in charge including cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing in position of coloured Indian water closet Oriya type of size 580 x 440 mm of ISI make/ best approved quality (in case ISI make not available) with 'P' (OR) 'S' trap and other materials, as directed by Board Engineer in charge including cost of all materials, labour, lead, lift, etc., complete.

Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x30mm. The over all size of frames shall be 50mm x 45mmwith suitable rebate for housing the shutter as directed by Board Engineer in charge including cost of materials, all leads, lifts, labours for fixing in position etc., complete. (Door Size:0.75*2.10)

Pre-Painted Galvanized Iron Fixed Louvered Ventilators with Glass and Grill: Providing and fixing louvered ventilator fabricated from roll formed sections made of galvanized steel colour coated / powder coated (Base steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 grams / sqm.) with total coated thickness of 0.58mm. Paint specification: Coated sections should be with primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns. Dimensions of sections: The section for external frame as directed by Board Engineer in charge including cost of materials, all leads, lifts, labours for fixing in position etc., complete. (PWD/SOR-24-25/M-0668/P.No.105)

Providing & fixing white Lipped Mouth Porcelain Flat Back Urinal of 430x260x350 mm size with all accessories such as 32mm dia Bell Mouth PVC Connection, 15mm dia GM Wheel Value, 15mm dia ‘B’ Class GI Waste Water Pipe, 15mm dia Nylon Connection, 15mm dia Brass Nipple as directed by Board Engineer in charge including cost of all materials, labour, lead, lift, etc., complete.

Providing and fixing pre-Polished/ Fine Polished Granite of 1200mm x 600mm, 16mm to 18mm thick of approved quality and source as divider to urinals including fixing to wall and finishing complete as directed by Board Engineer in charge including cost of all materials, labour, lead, lift, etc., complete.

Flooring with one course of pressed tiles 20cm x 20cm x 20mm of all available with ISI make / best approved quality ( in case ISI make not available ) using cement mortar (1:3) mixed with crude oil 10 percent by weight of cement and pointed with same oiled mortar as directed by Board Engineer in charge including cost of all materials, labour, lead, lift, scaffolding charges, etc., complete.

Providing and fixing of Short body Brass Chromium Plated Screw Down Tap 15 / 12mm dia (Heavy Type) with all tools, tackles, labour, equipment complete as directed by Board Engineer in charge including cost of all materials, labour, lead, lift, etc., complete.

M.Thangaraj (BID ID -1518505)