Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.6 LAccepted-AOC HOUSE NO 6 18 WARD NO 05 HOUSING BOARD COLONY HANUMANGARH JN 335512 RAJ | HANUMANGARH | RAJASTHAN | 335512 | L1 | Accepted-AOC L1 | |
| 2 | L2₹29.8 L+₹5.0 L (20.2%)Rejected-Finance | L2 | Rejected-Finance Highest bid quoted other then L1 |
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
16 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Sri Ganganagar
Garrison Engineer Sri Ganganagar, Military Engineer services , Sri GanganagarCantt Rajasthan-335001
PERIODICAL SERVICES OF JCOS/OR MD ACCN AREA MES COLONY INCL MAP-I and MAP-II AT MIL STN SGNR
2023_MES_633519_1
GE SGNR/TOK-71 OF 2023-24
Open Tender
Civil Works
Item Rate
270 days
Sri Ganganagar(Raj)
D Class a(i) and for un-enlisted, refer NIT para 8
7 documents required · 7 mandatory
₹500
GE Sri Ganganagar
₹60,000
Yes
26 Feb 2024
19 Dec 2023
18 Jan 2024
19 Dec 2023
16 Jan 2024
2 Jan 2024
Amount
Demolition of RCC , chajjas, Parapet and similar items complete all as specified and directed by Engineer - in - Charge.
Dismantling of brick work or stone/boulder masonry built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed by Engineer - in - Charge.
M&L brick work with sub class B bricks straight or curved on plan exceeding 6 mtr mean radius in cm 1:6 etc.complete all as specified and directed by Engineer - in - Charge.
M&L half brick work with sub class B bricks straight or curved on plan exceeding 6 mtr mean radius in cm 1:6 etc.complete all as specified and directed by Engineer - in - Charge.
Taking down cement plaster on brick or concrete surfaces of wall/ ceiling including racking out joints, hacking for keys scrubbing down with water complete all as specified directed by Engr-in-Charge.
M&L 15mm thick, rendering in cement mortar 1:6 to brick/concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L 15mm thick, rendering in cement mortar CM 1:4 to brick/concrete wall surfaces finished even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L 5mm thick, rendering in cement mortar 1:3 to ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L 10 mm thick, rendering in cement mortar CM 1:3 to work in isolated widths or widths not forming part of general plastering such as brick/concrete faces of chajjas,facia,window jambs,sunshade and similar work exc 15 cm but n exc 30 cm in width or girth; including cutting to edges, all mitres and stopped ends, etc. finished even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for fixing of GI wire netting 0.90 mm dia and 12mm mesh lathing by means of fasteners of requierd length and spacing beetween fasterners is 300mm centre to centre both way to concrete surface etc,in walls,ceilings,stanchions,beams,etc including all laps,cutting and waste etc complete all as specified and directed by Engineer-in- charge
M&L for 5 mm thick one layer of cement : Coarse sand (1:2) over fixed GI wire netting making good after that rendering 5 mm thick in cement mortar in 1:3 on ceiling complete all as specified and directed by Engineer-in- charge
M&L for prepration of New plastered Internal wall surface complete applying the following :- (a) Applying wall care putty (2mm thick) on wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directedcoomplete all as specified (b) Applying two coats of oil bound distemper over a coat of primer by using Brush / Roller over complete all as specified Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of places where using of Mechanical equiment are not posiible
M&L for prepration of New plastered External wall surface complete applying the following :- (a) Applying wall care putty (2mm thick) on wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directed complete all as specified and directed by Engineer-in- charge. (b) Applying Two coats of 100% Premium acrylic emulsion exterior paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by engineer in charge. Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of places where using of Mechanical equiment are not posiible
M&L for applying two coats of white wash on New plastered ceiling surface to make the surface even and smooth etc complete all as specified.
M&L for prepration of old plastered Internal wall surface complete applying the following :- (a) Applying wall care putty (2mm thick) on wall surfaceonly where for filling depression of surface and nail holes to making even surface. (b) Applying one coat of oil bound distemper (incl & up to G+3 floor Qtr) using Roller complete all as specified and directed by engineer in charge. (Note : The contractor shall be taken precaution as per MES safety code/IS)
M&L for applying one coat of white wash on old decorated surface of ceiling to make the surface even and smooth etc complete all as specified and directed by Engineer - in - Charge.
M&L for complete removal of existing treatment & washing the surface with pressure water on old External/internal wall surface complete all as specified and directed by engineer in charge
M&L for applying two coats of wall care putty on wall suface as per application (a) Applying one coat of wall putty (1.5mm thick) on cleaned surface after that grind the surface and clean the surface with broom and prepare the surface for second coat. (b) Applying 2nd coats of putty (1.5mm thick) complete all as specified and directed by engineer in charge.
M&L for applying one coat of primer on prepared surface using roller complete all as specified and directed by engineer in charge
M & L applying two coats of interior acrylic distemper(incl & up to G+3 floor Bldg) by using Roller over primed surface complete all as specified and directed by engineer in charge. (Note : The contractor shall be taken precautions as per MES safety code/IS)
M & L for applying two coats of 100% Premium acrylic emulsion exterior paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by engineer in charge.
M&L one coat of white wash on old decorated plastered or un-plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engr-in-Charge.
M&L for Obliterating old writing of any description, n exc 0.1 sq. m, with paint to match existing work etc complete all as specified and directed by Engineer - in - Charge.
M&L for Writing letters or figures with fluorecent paint ( Block. Roman, Italic or Indian) n exc. 30 cm high etc complete all as specified and directed by Engineer - in - Charge.
M&L Complete removal and Preparation of existing surfaces and applying two coats of cement base paint over a coat of primer on old decorated plastered surface of walls including preparation of surfaces complete all as specified and directed by Engr-in-Charge.
Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan – necks, etc. including cleaning of any description complete all as specified and directed by Engineer-in-Charge..
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed by Engr-in-Charge.
S&F 110mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed by Engr-in-Charge.
S & F Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays for 100mm bore of pipe, including bolts and nuts and securing ends of stays to wall or roof etc complete all as specified and directed by Engineer - in - Charge.
Taking down chowkhats or frames (without taking off shutters from the frames) exc 1.5 Sqm but n exc 4 sqm each complete all as specified and directed by Engineer - in - Charge.
S & F pressed steel door frames with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., size of frame 105x60mm complete all as specified and directed by Engineer - in - Charge. (Note : The thickness of MS Steel Sheet shall be 1.25mm)
S & F pressed steel door frames with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., size of frame 125x60mm complete all as specified and directed by Engineer - in - Charge.
M&L for Cement concrete 1:3:6 type C–0(12.5 mm graded stone aggregate) filling of pressed steel frame and hold fast blocks etc complete all as specified and directed by Engineer - in - Charge.
S&F factory made 35 mm thick gauged skelton shutters open rebeted and prepared to receive gauze etc edges of framing plain , chamferedv or rounded fitted with cut and mitred beady for receving gauze etc of IInd class hard wood rail and style and all as specified and directed by Engr-in-charge.
S&F 35 factory made mm thick IInd class hard wood plain framed panelled shutters (Two Panels ) with lock rails and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces . the size of rail and stile as per IS :1003 (Part -i) Klin Seasoned and chemically pressure treated all as specified and directed by Engr-in-charge.
Taking up or down GI tubing 20 mm bore pipe including cleaning for re-fixing complete all as specified and directed by Engineer - in - Charge.
Ditto- but refixing 20 mm dia ,old steel tubing and connections in new or old possition (wall,ceiling and floors etc) complete all as specified and directed by Engineer - in - Charge.
S&F GI tubing 20 mm bore medium grade galvanise with all fitting as in overflow pipe and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed by Engineer - in - Charge.
Taking down and Refixing old 500 Ltrs capacity Rotational moulded polyethylen water storage tank after cleaning and removing all scale and dirt etc from tanks and from mouths of cirulating pipes etc complete all as specified and directed by Engineer - in - Charge.
S&F 500 Litre capacity Rotational moulded polyethylene water storage tanks triple layered(white coloured) (cylindrical, vertical with closed top) conforming to IS, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including taking down of Old PVC Tank complete all as specified and directed by Engineer - in - Charge.
S&F 20 mm bore ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and directed by Engineer - in - Charge.
S&F in repair 20 mm bore ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and directed by Engineer - in - Charge.
M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.
Note :(i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.
BISHNOI BUILDERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .