REPAIR TO COMPOUND WALL, FENCING, GATE, PATHWAYS, DRAIN ETC AT BASISTHA AREA UNDER GE GUWAHATI

Amount

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement as necessary to facilitate demolition complete all as directed.

Demoliation Brickwork masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and as directed.

Dismantling and taking out fencing post of any description and in any position including taking out embeded portion from natural ground and making good disturbed surface of site complete all as directed.

Dismantling and taking out fencing post of any description and in any position including taking out embeded portion from concrete or massonry work and making good disturbed surface complete all as directed.

Dismantling fencing wire mesh, any type complete all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

Excavation in post holes (for similar holes) each not exc 0.50 cum getting out in soft/loose soil including returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm complete all as specified and directed

Excavation in post holes (for similar holes) each not exc 0.50 cum getting out in soft/loose soil complete all as specified and directed

M&L reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed including form work etc complete all as specified and as directed

M&L PCC (1:3:6) type C-2 (using 40 mm graded agreegate) as in foudation, Mass concreteas complete all as specified and as directed

M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape reqd including cranking, bending, spirally for hooping for columns hooking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed

M&L mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacer and binders cut to length, bent to shape reqd including cranking, bending, spirally for hooping for columns hooking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed

M&L preparing new plastered surfaces of any description and applying two coats of cement base paint over a coat of primer complete all as specified and directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wirecomplete all as specified and directed

Supply only chain link MS galvanized fencing of any size or type complete all as specified and as directed.

S & F in repair galvanized 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing & straining & fixing to any type of standards rails straining bolts including securing or tying at crossing with & provn of galvanized mild steel wire , complete all as specified and directed. (Each line wire to be measured)

S&F framed work such as posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including necessary preperation of surfaces and applying one shop coat of red oxide, zinc chrome primer complete all as specified and as directed.

S&F mild steel screw bolts (machine made) with hexagonal head at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal nut, length of bolt exceeding 5cm and not exc 10cm long dia of neck 12mm complete all as specified and as directed.

M&L preparation of new iron and steel surfaces of any description,n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete as specified and directed.

M&L Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed

M&L 15mm thick rendering with cement mortar (1:4) on fair faces of brick work in two layers (10mm & 5mm)seperately mixed with and including water proofing compound in top layer as per manufacturer's instructions and finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in surface channels and drain complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.complete all as specified and as directed.

Add to or deduct for each 25 mm girth or part thereof over or under 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed. Note:- Rate quoted is for adjustment of rate only for the actual size excuted at site for the item no 25 mentioned as above

M&L PCC (1:2:4) type B-2(using 40 mm graded stone aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and as directed.

M&L Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, roughed finished surfaces, complete all as specified and as directed.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for Machine pressed precast pre polished, coloured conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade set with grey cement and pigment complete all as specified and as directed. Note: (i) Sand coushning shall be measured and paid seperately under appropiate item (ii) Rate quoted is deemed be be insclusive of side filling of pavement with PCC 1:2:4 type B2 using 40mm graded crushed stone aggregate

M&L 75mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in sub base and finished even and fair without using extra cement complete all as specified and as directed.

M&L 100mm thick cement concrete 1:3:6, type B2 using 40mm graded crushed stone aggregate as in foot path/hardstanding finished surface even and fair without using extra cement complete all as specified and as directed.

M&L for preparation of new steel and iron surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

PRITHWI BUILDERS

M.G. ENTERPRISE