CONSTRUCTION OF URC DOOM SHED AND PROVISION OF HARD STANDING IN FRONT OF URC/HVF (OFFICERS COUNTER) IN HVF ESTATE.

Amount

M & L for R.C.C A1 Type, 1: 1.5: 3 M20, 20mm graded aggregate in foundations, including rafts, footings, column, beam, plinth beams, roof slab etc.,

Supply and fixing of twisted MS Bars 10mm dia and over, cut to length bent to shape required including cranking, bending, spiraling for hoping for columns, hooking ends and binding with MS Wire not less than 0.9mm dia or securing with clips.

Supply and fixing of deformed or twisted MS Bars 6mm dia up to 8mm dia cut to length bent to shape required including cranking, bending, spiraling for hoping for columns, hooking ends and binding with MS Wire not less than 0.9mm dia or securing with clips.

M & L for form work to side of RCC Members, Square/rectangular /polygenal such as columns, pillars etc., and the finishing shall be of fair finished surface.

M & L for Brick work built in CM.1:6 using Good quality modular bricks / solid Concrete bricks Bricks.straight or curved on plan exc 6m mean radius.

M & L for plastering in CM 1:4, 15mm thick on fair faces of brick work and concrete wall surfaces.

Material and labour for applying two coats of Plastic emulsion on internal wall surfaces including preparation of new wall surfaces complete all as directed.

M&L for painting two coats of exterior emulsion (Make APEX ULTIMA of ASIAN PAINTS) includings one coat of priming paint applies after preparation of the new existing treatment

Supply and Fixing of Fibre glass reinforced translucent corrugated sheetingof 2mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as directed.

Supply and fixing of framed work using Fe410 W(Gde-E- 250) A quality mild rolled steel tube , angles , plates etc . Inculding cutting , welding etc complete as directed by EIC.

S & F of PVC 110mm dia Pipes single socketed, in any length with rubber ring joints laid in trenches or in floors.

S & F of PVC Bend 110mm dia any radius.

M & L for painting to steel surfaces of any description over 10cm width or girth with two coats of synthetic enamel paint over a coat of Red Oxide primer including preparing new surfaces.

Bending charges for MS pipes of Framed/Tubular Trusses including handling and necessary transport charges etc comple as directed.

Getting Structural designfor Doom shed of size 16.00Mts x 16.00Mts resting of the existing old building from Reputed structural engineer /Designer.

Surface excavation in hard/ dense soil not exc.30 cm deep and averaging 15cm deep and getting out.

Material and labour for sand filling in foundation including watering and consolidation.

Material & Labour for PCC 1:3:6 type C2 using 40mm graded aggregate cement concrete in foundations , filling and mass concrete

Material & labour for PCC 1:2:4 mix,20mm graded aggregate e in foundations,filling and mass concrete

M & L for Forming 12mm thick expansion joints filled with performed bituminous filter and top 30mm primed and sealed with sealing compound Grade-B'thickness of concrete slab is 150mm.

Leela Constructions (BID ID -771203)

S VINAYAGAMURTHY (BID ID -771250)

DEEPAM ENTERPRISES (BID ID -771381)