CERTAIN B/R AND E/M WORKS SUCH AS FLOORING PLASTRING SANITARY FITTINGS JOINARY AND INTERNAL ELECTRIFICATION IN THE AREA OF OTM LIVING ACCN OF JCOS AND NCOS AT 617 BTY OF AGE B/R CENTRAL UNDER THE AOR OF GE DEOLALI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M & L Vitrified ceramic tiles (Double charged) 8 to 9mm thick (square/rectangular) area of each tile exceeding 0.36 sqm n' exc .42, in floors etc. with and including 15mm thick screed bed in CM 1:6 ,set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed.

Ditto all as above but in skirting over 8 to 9mm thick backing coat in CM 1:4 complete all as specified and directed

M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes etc complete all as directed.

Ditto all as above but in skirting over 7 to 8mm thick backing coat in 10mm thik in CM 1:4 complete all as specified and directed

M & L for joint free non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.06 but n exc 0.11 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over and including 15mm screed in CM 1:6 or with chemical cement to match all as directed.

M&L for joint free coloured glazed ceramic tiles in vertical surface of size 450X 350X 7mm thick of different shade colour and pattern as approved, over and including 10 mm thick rendering in CM 1:4 as backing coat finished to receive wall tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed and specified.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate ) as in subase finished to receive floor treatment etc complete all as directed.

M & L for chequered cement concrete tiles rubber moulded , 30cm x 30cm x 25mm thick confirm to IS 13801-1993 , set jointed & pointed in neat cement slurry with grey cement and pigment in floors incl Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified and directed

S&L machine pressed precast concrete interlocking paver block rubber moulded, any shape and size confirming ti IS-15658-2006 of 60mm thickness grey cement and with pigment , M-35 grade incl 30mm thick Sand filling to under interlocking tiles complete all as specified and directed.

Demolition of stone slabs, paving stones and tiles of any description and thickness in floors, aprons, laid, bedded and pointed in any mortar complete all as specified and directed.

M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete incl screed bed 15mm thick in CM 1:6 complete all as specified and directed.

All as per above but in riser of steps, skirting, dado and pillar laid over cement and including 10mm thick CM 1:4 backing coat complete all as specified and directed.

M & L for 15 to 18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes complete all as specified.

M & L for 15 mm thick Artificial Granite (of any type and colour ) work steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes complete all as specified.

Demolition wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets all as specified and directed.

S&F anodised/powder coated aluminum alloy interlocking snap grid 600mm x 600mm consists of Min Tee runners of size 38mm x 25mm x 1.5mm and cross Tee of size 25mm x 25mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm and wall angle 25mm x 25mm x 2mm fixed to wall perimetrs at 450mm centres and shall confirm to IS 733, IS 1285 with and including hangers of 4 mm dia. G.I. (upto 1200mm length and 1200mm centres) adjusting level fixed to roof steel members by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long etc complete all as specified and directed

M & L for 4mm thick non asbestos fibre cement building design boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws fixed in ceiling flat or sloping complete all as specified and direced.

S&F 25 mm thick interlocking WPC louvers of 25mmx 25mm(louvers size) wall thickness 1.50 to 2mm for wall panelling fixed with self tapping screw to SS clips over and and of approved colour and design complete all as specified as per manufacturerer instruction and directed by Engr-in-Charge

S&F 25 mm thick interlocking WPC louvers of 25mmx 25mm(louvers size) wall thickness 1.50 to 2mm for false ceiling/wall panelling fixed with self tapping screw over and including GI frame C channel 60MMX50MMx0.80mm and hanging GI wire 2mm dia of approved colour and design complete all as specified as per manufacturerer instruction and directed by Engr-in-Charge

S&F vitreous china single piece EWC bowl with cistern for extended wall hung WC of Size: 380x630x770 mm, PP Soft Seat cover, Hinges, Fixing Accessories, Accessories Set, and dual Cistern fittings, P trap-180mm complete all as specified and directed Make Jaquar cat part No CNS-WHT-353SPPZ or CNS-WHT-755S220SPPZ Bowl with cistern for or equivalent in kohlar, grohe and Roca

S&F 15mm bore brass chromium plated long body bath tub spout with flange and screwed down to GI pipe complete all as specified and directed Make Jaguar Cat part No SPJ-35463PM OR EQVL IN Kohlar, Roca/Grohe

S&F brass chromium plated Exposed part Kit of single lever WHB Mixture wall mounted consisting of operating lever, wall flange, nipple and Spout ( Suitable for Item ALD-233) complete all as specified and directed by Engr-in-charge Make : cat Part No:- LYR-38233NK OR EQVL IN Kohlar, Roca/Grohe

S&F Concealed body single lever basin Mixture wall mounted with cartridge sleeve but without exposed parts and fixing to steel pipe or union complete all as specified and directed by Engr-in-charge Make Jaquar cat part No ALD-233N OR EQVL IN Kohlar, Roca/Grohe

S&F 15mm bore brass chromium plated long body bath tub spout with flange and screwed down to GI pipe complete all as specified and directed Make Jaguar Cat part No SPJ-35429PM OR EQVL IN Kohlar, Roca/Grohe

S&F Double Arm wall mounted Reversible magnifying (X3) Pivotal mirror fixed with rawl pug and washer complete all as specified and directed By Engr-in-charge Make:- cat Part No ACN-1193N of Jaquar OR EQVL IN Kohlar, Roca/Grohe

S&F in repairs 15mm bore fancy type CONCEALED STOP COCK WITH BODY PART, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as directed Make Jaquar cat part No LYR-38083K AND ALD-089 OR EQVL IN Kohlar, Roca/Grohe

S&F IN Repair 15mm maze hand shower of size 95x95 mm squre shape single flow(face plate stailess steel and ABS body ) with rubbit cleaning system with an incl flexible tube 8mm dia and 1.5mtr long with nuts and premium wall bracket and hand shower fixed wall outlet with shower hook in square shape complete all as directed Make Jaquar cat part No HSH 1655 AND SHA 566S & SHA 549D8 OR EQVL IN Kohlar, Roca/Grohe

S&F in repair body shower concealed type 130x120mm rectangular shape with instalation box and rubit cleaning system complete Make Jaquar cat part No bsh -1771 OR EQVL IN Kohlar, Roca/Grohe

S&F in repair stainless steel chromium plated anticockroach grating jali 600x100 mm fixed complete all as spcified and directed by Engr-in-charge Make Somany cat part No 272150050691 OR EQVL IN Jaquar Kohlar, Roca/Grohe

S&F in repair stainless steel chromium plated towel ring complete all as specified and directed Make Jaquar cat part No vgs-ACN1121BN OR EQVL IN Kohlar, Roca/Grohe

S&F in repair stainless steel chromium plated SOAP dispenser with glass bottle complete all as specified and directed Make Jaquar cat part No vgs-ACN1135N OR EQVL IN Kohlar, Roca/Grohe

S&F In repair s Aquamax exposed part kit of thermostatic shower mixer with 3 way diverter (suitable mixer 3 way diverter (suitable for ALD 683)Jaquar Cat Part No ARI39683K OR EQVL IN Kohlar, Roca/Grohe

S&F Concealed body OF THERMOSTATIC shower mixture with three way diverter but without exposed parts and fixing to steel pipe or union complete all as specified and directed by Engr-in-charge Make Jaquar cat part No ALD-683 OR EQVL IN Kohlar, Roca/Grohe

S&F in repair vitreous china Wash Basin counter Top 600x400x185mm including stainless steel bottle trap and 40 mm dia GI pipe up to Floor trap complete all as specified and directed by Engr-in-Charge Make : Cat Part No SLS-WHT-6601 & ALD-769L250x190 of Jaquar or equivalent in kohlar, grohe and Roca

S&F in repairs 15mm bore fancy type bib taps, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as directed MAKE:- ESSCO CAT NO MQT-512KN

S&F in repairs 15mm bore pillar taps fancy type, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nuts complete all as specified and directed.MAKE :- ESSCO MQT-508KN

S & F 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and directed

S & F in repairs chromium plated fancy type Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed Make :-ESSCO Cat noMQT-526NKN

S & F in repairs Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern to squatt pattern closet including all joints and making good to the floor complete all as specified and directed

S & F LDPE pipe 32mm bore fixed to wall/ceiling with bends/elbow complete fixed in repairs complete all as specified and directed

S&F for grating doom 100mm dia S S etc complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC flushing cistern, low or high level, with inlet and outlet pipe, ball valve, syphonic action type, float and handle, pull or push type including brackets etc complete all as specified and directed. MAKE :-CERA CAT NO B1010102

Dismantling of water tanks including disconnecting all connections etc. complete for capacity of tanks .(a) Exc 250ltrs but not exc 500 ltrs

Dismantling of water tanks including disconnecting all connections etc. complete for capacity of tanks . Exc 500 ltrs but not exc 1000 ltrst

S&F new rotational moulded polythylene water storage tank (cylindrical/ vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing brass ball valve 25mm bore high pressure with polythene float and fly nut, screwed for iron pipe or brass ferrule complete for tank capacity of: -(Exc 250ltrs but n;exc 500 ltrs) MAKE -SINTEX

S&F new rotational moulded polythylene water storage tank (cylindrical/ vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing brass ball valve 25mm bore high pressure with polythene float and fly nut, screwed for iron pipe or brass ferrule complete for tank capacity of: -(Exc 500ltrs but n;exc 1000 ltrs) MAKE -SINTEX

Taking up or down steel tubing and connections 15 mm Bore including cleaning for refixing or removal to store S & F GI tubing 15 mm bore Tubes, 'medium grade',' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors all as specified & as directed .

Taking up or down steel tubing and connections 20 mm Bore including cleaning for refixing or removal to store S & F GI tubing 20 mm bore Tubes, 'medium grade',' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors all as specified & as directed .

S&F in repair Gun-metal, globe or gate valves for 20 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.5 Sqm each complete all as specified and directed

Taking down chowkats or frames with Shutters (without taking off shutters from the frame 1.50 Sqm and n exc 4.00 Sqm each complete all as specified and directed

Taking down Shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed

S & f Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid forseparately). → Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made

S&F Plain, solid, straight chowkhats and frames of 2nd class Hard Wood wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) S&

S & F 2nd class H.W. glazed & skeleton shutter 35mm thick factory made open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass,gauge etc size of members complete all as specified and directed.

S & F 2nd class HW shutters 35mm thick, plain framed paneled shutter factory made (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 complete all as specified and directed.

S&F 30mm thick flush door shutters solid core construction with block board core and plywood face panels commercial type on both sides etc complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed.

S&F coloured powder coated (50 micron) aluminium sections any type for doors,windows, ventilators frames including joining cleat for fixing etc. complete all as specified and directed.

S & F bombay sliding powder coated aluminium three track sliding windows, including fabrication of frame size 94mmx 34mmx1.50mm and three track shutters frame size 40mmx 18mmx18mm( two glass shutters and one wiremesh shutter) and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, provn of AC opening and rubber beadings for fixing glass panes in frame complete all as specified by Engr-In- Charge. Note : (i) the quoted rate shall be inclusive of cost of Glass panes/wire cloth will not be measured not paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips,hinges, handle. However it will be not be weighed and not paid separately.(iii) All other minor details including cost of locking arrangement shall be included in the quoted rate.Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India

S&F for powder coated aluminium ventilator shutters with frame not less than 0.35 Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick glass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed.

S&F coloured powder coated (50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S & F 5.50 mm thick sheet glass fixed in window shutters etc complete all as directed.

Dismantling of boarding any description fixed in any position with nails complete all as specified and as directed

S&F factory made 100 % solid wood plastic composite (WPC) flush type shutter of 18mm thickness one side laminate consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacture specification.Make : ECHON/Sintex/Rajshree/Navratan

S & F 100 mm long Butt hinges, cast brass, with Stainless steel hinge pin, bright polished and fixed, type B-12 complete all as specified and directed

S & F 75 mm long Butt hinges, cast brass, Stainless steel with l hinge pin, bright polished and fixed, type B-12 complete all as specified and directed

S&F 150 mm long Stainless steel barrel tower bolts of extruded section complete all as specified and directed

S&F 150 mm size aStainless steel handle complete all as specified and directed

All as per above but 100 mm size complete all as specified and directed

M&L 300 mm long Stainless steel sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed

S&F in repair 25 mm stainless steel curtain rod with decorative funnels complete all as specified and directed by Engr-in-charge.

S&F SS heavy duty decorative brackets suitable for 25mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed. Note: Curtain rod shall be measured and paid separately

S & F in repair Door closer hydrau lically regulated, aluminum( die cast)body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

M & L preparation of new wood surfaces of any description over 10cm in girth or width & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

M&L for painting with two coats of synthetic enamel paint to steel surfaces of any description over 10cm width or girth on untreated steel surfaces over a coat of red oxide primer after preparation of surfaces complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and fixed in any position etc complete all as directed.

S&F for Framed work in grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 with cutting top drilling holes including hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc necessary welding complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position from unframed work as in roof members complete all as specified and directed

Dismantling of Battens for tiles spaced exc 15cm, shingles etc, of any size including tilting fillets

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering including ridges /cladding to wall,fixed with self tapping screws as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering including ridges /cladding to wall,fixed with self tapping screws as specified and directed.

S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as directed.

Dismantling of single layer Mangalore pattern or similar tiles in roofing incl ridge/hip tiles etc complete all as directed.

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm etc complete all as directed.MAKE : NIRALI/IDIAMOND

S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastesincluding bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm MAKE : NIRALI/IDIAMOND

S&F in repairs glazed earthen ware viterous china wash basin white coloured (flat back or angle back type), size 550x400 mm and including CI brackets and outlet of 32mm bore waste fittings, brass chromium plated bottle traps 32mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, etc complete all specified and directed. etc complete all as directed. MAKE :- CERA CATE NO S2090157

S&F in repairs viterous china wash down water closet (pedestal pattern) white coloured with and including plastic water closed seat, white, closed pattern with recessed bottom, and cover and mild steel chromium plated hinging device etc complete all as directed.MAKE CERA AT NO S1053106

S & F in repairs vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including provn of cement concrete bedding etc complete all as specified and directed. Make- cera

S&F in repairs Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including fixing Brass chromium plated bottle traps 32mm bore for urinal with inlet and outlet screwed for pipe or connections including necessary packing, union fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. etc complete all as specified and directed. make - cera

S&F vitreous china Sensor Urinal of Size: 340x265x560 mm,wall hung urinal back inlet urinal with DC sensor, removable ceramic waste plug with water seal complete all as specified and directed Make cat part No Aurore of Somany or equivalent in Jaquar, grohe and Roca

Dismantling of Cast iron or reinforced concrete drain pipes 100 mm bore all as specified and directed.

S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and directed

S&F for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and directed

S&F PVC (SWR) bend any radius 110mm complete all as specified and directed

S&F PVC (SWR) bend any radius 75mm complete all as specified and directed

Demolition of brick work / stone boulders masonry built in cement mortar incl all Quoins , archeas, pillars etc bu exc cluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for Brickwork with fly ash Old size bricks, straight or curved on plan exc 6m mean radius, built in in CM 1:6 etc complete all as directed.

Ditto all as per above but except bricks

Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for 10mm thick rendering internally in CM 1:6 on fair faces of brickwork or concrete surfaces finished finished even and smooth (without using extra lime or cement) etc complete all as specified and directed.

M&L for 5mm thick ceiling plaster on concrete surfaces in CM 1:3 finished even and smooth with a thin layer of sagol.

M&L for preparation of new plastered surfaces in ceiling and applying two coats of white wash etc complete all as directed.

M&L for preparation of newly plastered surfaces of walls and applying one coat of alkali resistant primer over two coats of oil emulsion distemper etc complete all as directed.

M & L Rubbing an Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete.

M&L for cement concrete type B0 (1:2:4) using 20 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc.

Dismantling of posts or struts(wood, steel or RCC) any section embadded in concrete, including taking out embedded portion and making good disturbed ground all as specified and directed.

Dismantling of fencing wire mesh of any type complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard dense soil.

M & L for cement concrete Type B2 1:4:8 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified.

Supply only chain link MS galvanized fencing of any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire

S & F mild steel bolt screwed one end with hexagonal or square nuts & washers the other end enlarged not exc 15cm long dia of neck 12mm complete all as specified and directed.

S&F 10mm dia MS Round bars as in support of Chain Link Fencing all as specified.

Taking down copper/aluminium point wirin (light, fan, socket or power) complete, includingfixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custodyor for taking credit (credit for above items should bemade as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Material and labour for point wiring with stranded copper conductor PVC insulated unsheathed 1.5 Sqmm FRLS cable in and including PVC casing caping of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow,Tee,collers bend, PVC conduit for crossing etc. complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core continuous 1.5 Sqmm,FRLS copper cable for earth wire complete all as specified and as directed for :-

One Light point controlled by one switch

One light point controlled by two two way switches.

One fan point controlled by one switch

One 3 pin socket outlet. 5 Amps on the same board.

One 3 pin socket outlet. 5 Amps on the independent. board

One bell point controlled by one switch.

All as item No- above but One 15 A socket outlet independent with 2.5 sq mm PVC cable and 1.5 sqmm cable as earth continuity wire.

Supply and fix switch piano flush type single pole one way 5 Amps complete all as specied .

Supply and fix switch piano flush type single pole two way 5 Amps complete all as specified .

Supply and fix Bell push button SP 5 Amp, flush type complete all as specified .

Supply and fix Bell electric AC 230 Volts single pole ding dong type complete all as specified and as directed.

Supply and fix switch socket combination 3 pin 5 Amps flush type (multi purpose ) complete all as specified and as directed.

Supply and fix switch socket combination 2 in 1, 3 pin, 5 and 15 amp flush type universal complete all as specified and as directed.

Supply and fix ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed.

S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.

S&F in replacement LED tube light 20 Watt fitting white powder coated slim box type batten made of formed CRCA sheet with snap on installer sutable for double side connection LED tube in and including batten and tube etc complete in all respect.

Supply and fix stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd

Supply and fix in repair sheet metal enclosure DBs SPN, 240V with 200 Amps rated bus bars double door complete all as specified and as directed of following sizes:-

Supply and fix in replacement MCB SP 6 to 32 Amps, 240 volts complete all as specified and as directed. Make L&T/ABB/SIEMENS/ LEGRAND

Supply and fix in replacement MCB SPN 32 Amps, 240 volts complete all as specified and as directed. Make L&T/ABB/SIEMENS/ LEGRAND

Supply and fix in replacement of PVC casing/caping of size 25/32 mm with all requisite accessories i.e. junction box, inner& outer corners,bends, tees,collers ,reducers etc complete all as directed.

S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps.

M & L of sub main wiring with 2 single core, 6 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FRLS cable 1100 Volts grade incl 4.0 Sqmm PVC insulated unsheathed multi stranded copper conductor FRLS as continuous earth wire and connecting to common earth terminals complete all as specified and directed in Existing conduits/ PVC capping- casing. Note :-(i) Two run of copper cable and one run of earth wire shall be measured as one length. (ii) If Casing- capping required at site, they will be measured and paid under respective items

Ditto all as per item No - above but with 2 runs of 4 Sqmm cable with one run of 2.5 Sqmm cable for earthing.

M & L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion .

S&F 25 Watt New generation energy saving and environmental friendly long life LED Security light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK07.

M & L for bracket made out of GI tubing 32 mm dia,light grade 1.0 mtr long including fixing with MS clamps -2 Nos made out of 25 mm wide 4 mm thick flat iron with M.S. nuts, bolts/screw -4 Nos & flat washer 01 No. for each including preparation of steel surfaces and painting with two coats of paint over one coat of red oxide to the M.S clamps & bracket etc complete all as specified and as directed.

S&F 34 watt Environmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling.

Supply and fix in repair switch socket combination 2 in 1, 3 pin 5 Amps flush type universa complete all as specified and as directed.

Supply and fix inrepairs of switch socket combination 2 in 1, 3 pin, 5 & 15 amp flush type universal complete all as specified and as directed.

S & F in repairs of lamp angle/batten holder Bakelite Pin/Retrofit type complete all as specified and as directed.

S & F in repairs switch piano flush type single pole one way 5 Amps

Note: Amount of sch of credit of Rs.83474/-will be deducted from total amount of BOQ.

M/S YOGESH CONSTRUCTION (BID ID -3068666)

M/S B R BHALERAO (BID ID -3081951)

J Sams Contructions (BID ID -3069755)