REPAIR TO ROOF CEILING FLOORING PLINTH PROTECTION BRICK WORK PLASTERING AND SUNKEN FLOOR DADO SOIL WASTE VENTAND WATER SUPPLY PIPES SANITARY FITTINGS PLUMBING INCLUDING OVER HEAD CLEANING IN ZONE B AREA UNDER GE (EAST) MATHURA

Amount

Taking down cement plaster on brick walls or concrete surface including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L for rendering 15 mm thick on other than fair faces of brick wall or concrete surface in cement mortar 1:4 finished even & fair complete all as specified and as directed.

M&L rendering 15mm thick on other than fair face of brick work or concrete surface in cement mortar 1:4 by mixing liquid water proofing compound as per manufacturers instructions and finished surface even and smooth without using extra cement complete all as specified and as directed. Note :- Liquid WPC shall be measured & paid separately under relevant item of this BOQ.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces of in cement mortar 1:6 finished even and fair complete all as specified and as directed.

M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering complete all as specified and as directed. Note : Make of the material 'Smart Care damp block 2K' of Asian paints or equivalent from Dr Fixit, STP, CICA etc. as approved by GE

M&L preparation of newly plastered surfaces of walls, providing 1mm thick wall care putty to achieve smooth surface and applying two coats of oil bound distember over a coat of alkali resistant primer complete all as specified and as directed.

M&L preparation of newly plastered surfaces of walls and applying two coats of cement base paint white or tinted over a coat of primer complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for 20 mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 15 mm thick screed bed in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections complete all as specified and as directed.

S&F 15 mm bore steel tubes, medium grade, galvanised with and including all fittings fixed to walls and ceiling or laid in floor complete all as specified and as directed.

Dismantling of Asbestos Cement (corrugated or semi-corrugated) sheets in roof covering including ridges, hips, valleys and flashings etc complete all as specified and as directed.

S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corugations side lap fixed with L-type or J-type or crank hook bolts in roof, wall etc complete all as specified and as directed.

S&F 6mm thick Asbestos Cement, corrugated or semi-corrugated sheets in roofs, walls, etc fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed.

S&F asbestos cement one piece plain angular ridge 6mm thick fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 as in ridge fixed with self tapping screws complete all as specified and as directed.

Dismantling timber scantlings 40sqcm and over in section, in any position in framed work complete all as specified and as directed.

M&L for Mild steel work in purlins, rafter including special shaped washer, angle cleats, fish plates, gusset plates, base/ bearing plates, bolts and nuts etc. complete using ERW or induction butt welded tubes conforming to 1161-1979 grade st 240 complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L for providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint for all hights complete all as specified and as directed.

M&L for 4 mm thick non-asbestos fibre cement building board and fixed on aluminium grid with screws complete all as specified and as directed.

M&l for preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 100 mm thick cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) as in sub base, Sub floor, foors and paving etc complete all as specified and as directed.

M&L for chequred cement concrete tiles of size 20cm x 20cm x 25mm with white cement and pigments, set jointed and pointed in neat cement slurry in floors laid over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Dismantling brick/concrete tiles in floors, channels, kerbs, aprons, etc. (each layer) any size laid bedded and pointed in any mortor complete all as specified and as specified.

Demolition of roof treatment including PCC/ Brick Tiles, Mud phuska, PCC padding, plastering, APP membrane complete complete of any thicknesss and in any position and removing the demolished material out of MoD land complete all as specified and as directed.

M&L for bitumen felt water proofing treatment using APP based polymeric membrane not less than 3 mm thick, weighing not less then 3.00 kg / Sqm, reinforeced with polyster non-woven fabric (weighing not less than 150 gm/sqm) laid over and including cold bitumen primer applied at the rate of 0.30 kg/sqm by forced application complete all as specified and as directed.

M&L for providing cement concrete type B0 1:2:4 (using 12.5mm graded stone aggregate) as in roof padding to achieve the required slope and smooth surface and in coping, benching etc mixed with liquid water proofing compound @ 3% by weight of cement or as per manufactures instructions complete all as specified and as directed. Note : Liquid WPC shall be measured and paid separately under relevant item of this BOQ.

M&L for cement concrete tiles 20cm x 20cm x 20mm thick, with grey cement and no pigments, machine pressed, set jointed and pointed in neat cement slurry in floor laid over and including 15 mm thick screed bed in cement mortar 1:6 and filling the joints with Tile Mix premium cementitious grout material of JK Cement or its equivalent complete all as specified and as directed.

M&L for 50mm thick cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection, finishing cement concrete surface even and smooth (using extra cement) complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F welded steel wire fabric of weight per square metre n exc 4 kg supplied and fixed to wood or steel members complete all as specified and as directed.

S&F framed brackets of angles or tees with web and flanges out to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc n exc 10 kg each brackets, conforming to Fe-290 Gde-E-165 (brackets over 10 kg each to be measured under structural steel) complete all as specified and as directed.

Demolition of Brick work or stone/boulder masonary, buit in cement mortor or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for Brick work with old size fly ash Bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises compete all as specified and as directed.

M&L for Non Skid ceramic joint free coloured tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1 : 6 complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface of size 450x300x 7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick backing coat in cement motar 1:4 complete all as specified and as directed.

M&L for Light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

All as per item Serial No 42.00 here-in-before but as in skirting/dado laid over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for such as in sunken floor etc. complete all as specified and directed.

M&L for Providing, cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in sunken floor as directed mixed with liquid water proofing compound as per manufacturer's instructions complete all as specified and as directed. Note : WPC shall be measured and paid separately under relevant item of BOQ.

M&L for Providing, cement concrete 1:7:12 type F2(using 40 mm graded stone aggregate) as filling in sunken floor complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surface as in ceiling in mortar 1:3 surface finished even & fair complete all as specified and directed.

M&L for preparation of new plastered surface of ceilling and applying three coats of white wash complete all as specified and as directed.

M&L for preparing newly plastered surface of walls and applying three coats of white wash complete all as specified and directed.

S&F in repairs high density polythene pipe 32 mm (HDPE) of pressure @ 6 Kg/Sqcm laid in trenches complete all as specified and directed.

S&F in repair 75 mm dia of outlet PVC (SRW) floor trap plain with grating including jointing with solvent cement complete all as specified.

M&L for 150mmx 100mm Salt-glazed stoneware gully traps, square or round mouthed, type 'P' and setting and jointing in cement mortar 1:1 complete as in repairs complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) vent cowl complete as specified and as directed.

S&F in repair 110mm bore PVC (SWR) bends any radius with oval access door complete as specified and as directed.

S&F in repair 75mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F in repair 75mm bore PVC (SWR) bends with acces door any radius complete all as specified and as directed.

S&F in repair 110mm bore PVC (SWR) bends any radius complete as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) branch piece singe (Single Tee) equal or unequal with access door complete all as specified and as directed.

S&F in repair 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F in repair stainless steel toilet Roll holder fixed to wall complete all as specified and directed.

S&F in repair Basin Mixer cast copper alloy chromium plated of 15mm bore dia with 450 mm long Braided hoses complete all as specified and as directed.

S&F in repair stainless steel Towel Rack 600 mm long with lower Hangers complete all as specified and directed.

S&F in repair Wall mixer cast copper alloy chromium plated with provision for head shower of 15mm bore with 115mm long Bend pipe, connecting legs & wall Flange complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections complete all as specified and as directed.

Taking up or down 20mm dia bore steel tubing and connections complete all as specified and as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth of brick walls complete all as specified and as directed.

S&F 15 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union and fixed to walls and ceiling or laid in floor complete all as specified and as directed.

S&F 20 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc and fixed complete to walls and ceiling or laid in floor complete all as specified and as directed.

S&F in repair bib taps cast copper alloy, chromium plated, fancy type with crutch or butter fly handle, screwed down, screwed for 15 mm bore dia pipes complete all as specified and directed.

S&F in repair Bib tap standard of PTMT any colour high pressure screwed for iron pipe 15 mm bore and fixed. (Minimum weight 15mm-90gms) complete all as specified and directed.

S&F in repair stop/gate valves, cast copper alloy, chromium plated, fancy type with crutch or butter fly handle, screwed down, screwed both end for iron pipes 15 mm bore dia complete all as specified and directed.

S&F in repairs stop valve, cast copper alloy, fency type chromium plated with long shank and cup (Concealed type) screwed both ends for iron pipe 15mm bore dia complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back size 550 x 400 mm including bracket and pair of rack bolts waste fitting 32mm bore brass chromium plated with long screwed sanks and fly nuts, flange and bolded in red lead cement and other end fixed, including pillar tap cast copper alloy chromium plated fancy type screwed down type pressure with or without lettered hot or cold with long screwed shank and fly nuts, screwed for iron pipe 15 mm bore dia complete all as specified and directed.

S&F in repair PVC cabinet with mirror of size 350 mm x 450 mm, fixed to wall with screw complete all as specified and as directed. Make : Prayag/Commander / Neelkamal / Polytuff

S&F in repairs pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for 15 mm bore dia iron pipe complete all as specified and directed.

S&F in repairs 750 mm long PVC flexible waste pipe 32 mm bore dia for fixing in urinals and wash basin complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with stainless steel bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs corner racks with glass of size 225x225mm 8mm thick bevelled on edges with two brackets of stainless steel complete all as specified and directed.

S&F in repairs swivel shower of PTMT 100mm dia any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified and directed.

S&F Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms) complete all as specified and directed.

S&F in repairs white Vitreous china wash down water closet (pedestal pattern) including fixing bolts and plastic water closet seat cover white, closed pattern with flat bottom, and cover with aluminised hinging device, including all connection complete all as specified and directed.

S&F in repair white european type combination pattern WC casket type christinna with mounted flushing cistern , PVC connection,seat cover and jointed to sewage pipe. complete all as specified and directed.

S&F in repairs stainless steel Jet for EWC complete set including 450 mm long flexible tube and wall hook complete all as specified and directed.

S&F in repair plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete as specified and as directed.

S&F in repairs Viterous china squatting pan, Órissa' pattern, size 580 x 440mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe etc complete and making good to floor to match the existing complete all as specified and directed.

S&F in repair Vitreous China urinal full stall type, white (excluding flushing cistern, flush pipe and wast pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement all as specified and directed.

S&F in repairs PVC syphon kit for one piece EWC complete for low level flushing cistern complete all as specified and directed.

S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, aluminium brackets for bottom support fixing with PVC gutties embeded in wall with drilling machine etc complete all as specified and directed.

S&F in repair two way angle cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes 15mm bore dia complete all as specified and directed.

S&F in repair Health faucet of superior quality ABS body with 8 mm dia, 1.2 m long stainless steel flexible tube and wall hook complete all as specified and as directed.

S&F in repair waste coupling of 32 mm bore dia brass chromium plated for glazed ware sink, basins, etc with long screwed shanks and fly nuts, flanges end bedded in red lead cement and other end fixed. complete all as specified and directed.

S&F in repair waste coupling of 40 mm bore dia brass chromium plated for sink , etc with long screwed shanks and fly nuts flanges end bedded in red lead cement and other end fixed.

S&F in repair 600 mm long PVC connections 15 mm size with PTMT nuts at both end complete all as specified and directed.

S&F in repairs stainless steel towel rail 600 mm long 20 mm dia fixed with steel screw etc complete all as specified and directed.

S&F in repair stainless steel soap dish fixed to wall complete all as specified and directed.

S&F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for 20mm bore dia pipe and fixed (minimum weight 210 gms each) complete as specified and as directed.

S&F in repairs cover for HDPE water tank of capacity 500 & 1000 ltrs any type & make rotating type with frame including nut bolt complete all as specified and as directed.

S&F in repairs stainless steel plated grating (round) 125 mm dia fixed over floor/nahani trap (with hole/without hole) complete all as specified and directed.

Supply and fix in repair 500 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 20mm bore dia complete all as specified and directed.

Supply and fix in repair 1000 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 20mm bore dia complete all as specified and directed.

M&L for Cleaning of HDPE tank of capacity exc 250 liter but n exe 500 litres by Flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 metre and depositing where directed complete all as specified and as directed.

All as per item No 105.00 here-in-before above but capacity of tank exc 500 litre but not exc. 1000 litres complete all as specified and directed.

S&F in repair Gun metal, globe or gate valves,with iron wheel head,including making thread to both ends of pipes for fixing,screwed both ends for iron pipes 20mm bore dia and fixed. complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack of size 31" x 30" x 10" deep, fabricated out of 0.63 mm sheet fixed in position on wall complete all as specified and as directed.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

Demolition of stone slabs & tiles of any decsription or thickness in floors, aprons etc laid bedded & pointed in any mortar complete all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps jambs,window cills, cooking platform and like laid over and including 15 mm thick screed in cement mortar 1:4 including pointing in white cement (1:2) using marbal dust with admixture of pigment to match the shade of granite colour including rounded/ half rounded edge and providing hole for gas pipe in pre-cast slab complete all as specified and as directed.

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipeverall size 1143mm x 510mm x 229 bowl size 450mm x 330mm x 160mm. complete all as specified and directed.

S&F in repair 15-20mm bore GI reducer complete all as specified and directed.

S&F in repair 20 mm bore GI Union complete all as specified and directed.

S&F in repair 20 mm bore GI Elbow complete all as specified and directed.

S&F in repair 20 mm bore GI socket complete all as specified and directed.

S&F in repair 15 mm bore GI Tee complete all as specified and directed.

S&F in repair 15 mm bore GI Union complete all as specified and directed.

S&F in repair 15 mm bore GI Elbow complete all as specified and directed.

S&F in repair 15 mm bore GI socket complete all as specified and directed.

S&F in repair 15 mm bore 150 mm long Nipple complete all as specified and directed.

S&F in repair 15 mmbore 100 mm long Nipple complete all as specified and directed.

S&F in repairs 15 mm bore GI nipple fully threaded with two numbers check nuts and washers for PVC tank, 100mm long to PVC tank with back nut and washers for inlet and outlet pipe of following sizes complete all as specified and directed.

S&F in repairs 20 mm bore GI nipple fully threaded with two numbers check nuts and washers for PVC tank, 100mm long to PVC tank with back nut and washers for inlet and outlet pipe complete all as specified and directed.

B S ENTERPRISES

M/S United Builders

M/S ANIL KUMAR

M/S MAMTA CONSTRUCTIONS

R N AGRAWAL

M/s Hoti Lal Contractor