COMPREHENSIVE REPAIR/ MAINT OF BLDGS AND REPAIR TO DRAIN, PATH, CULVERT AND FENCING FOR ARMY AVN AT MANASBAL UNDER GE 970 EWS

Amount

Demolition of unreinforced cement concrete in ground floors etc and paving not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 Type-B-0 (using 12.5mm graded crushed stone aggregate) in leveling course, benching etc, finished even and rough to receive cement mortar screed bed, complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L non skid coloured ceramic tiles pattern as required of 8 to 10 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc over and including 15mm thick cement screed bed in CM 1:6 set and joint in neat cement slurry and pointed in white or coloured cement to match, compete all as specified and directed.

M&L glazed ceramic coloured, designer & pattern (dark & light shade combination) tiles in 350x250x7 or 450x350x7 or 450 x 300 thick over including 10 mm thick backing coat in CM 1:4 and set jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and directed.

S&f light shade vitrified ceramic tiles 10mm thick (Sqaure/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc, set and joint in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM (1:4), compete all as specified and directed.

Ditto as per item No 6 above but as on vertical surface such as skirting, dados and risers over and including 10mm thick backing coat in CM (1:4), complete all as specified and directed.

Dismantling wall and ceiling board (fibre, pulp, insulation, etc) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed.

S&f in repairs aluminium anodised snap grid frame work for false ceiling all as specified size of grid 605x605mm complete all as specified and directed.

M&L for providing & fixing Gypsum board 12mm thick in ceiling fixed with screw as per manufacturer's instructions complete all as specified and directed.

S&f 5mm thick PVC sheet fillet of width 35mm for all paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing, complete all as specified and directed.

S&f solid PVC Wall lining consisting of 5mm thick plain colour PVC sheets inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S&f for wooden flooring of AC4 class fixed to wooden or concrete surface including preparing the surface to receive wooden flooring including dismantling existing flooring complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any guage, thickness, including nsinital or similar pattern roof coverings complete all as specified and directed.

S&f pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550mpa as in roof covering/ cladding to wall, fixed with self screws or J/L hook complete all as specified and directed.

S&f pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering/ cladding to wall, fixed with tapping screws or J/L hook complete all as specified and directed.

S&f for framed work such as grills, gratings etc., with ends of bars shouldered and or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railing; frame workof water tanks and similar work con-forming to Fe.290.Gde-E-165 complete all as specified and directed

M&L for preparing new steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide/ zinc chrome primer complete all as specified and directed.

S&f in repairs PVC low level flushing cistern 10 Ltr capacity, white, with all fitting and fixtures including brackets and 32mm bore PVC flush pipe 600mm long, fixed in repair,complete all as specified and directed.

S&f in repairs brass chromium plated wall mixer for mixing hot & cold water, high pressure, screwed down for 15mm bore iron pipe fixed complete all as specified and directed including taking down old one.

S&f in repairs brass CP mixer fency type for mixing for mixing hot & cold water srewed, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipes fixed in repairs complete all as specified and directed.

S&f in repairs PVC connections 15mm, 600mm length with PTMT nuts at both ends complete all as specified and directed

S&f in repairs bib taps body cast copper alloy chromium plated with capstan head screwed down, srewed iron pipe or for brass ferrule 15mm bore of approved make complete all as specified and directed

S&f in repairs health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and directed.

S&f in repairs angle cocks, 15mm bore, fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&f in repairs 2 in 1 angle cocks, 15mm bore, fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&f repairs rotational moulded HDPE water storage tank (cylindrical vertical with closed top) of 500 ltrs capacity, ISI marked, double layered hoisted and fixed in position including connecting up pipes including dismantling old water tank, 20mm bore brass body ball valves, high pressure and 25mm bore gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe complete, all as specified and directed.

S&f repairs rotational moulded HDPE water storage tank (cylindrical vertical with closed top) of 1000 ltrs capacity, ISI marked, double layered hoisted and fixed in position including connecting up pipes including dismantling old water tank, 20mm bore brass body ball valves, high pressure and 25mm bore gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe complete, all as specified and directed.

S&f repairs 20mmm bore ball valves, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed

Dismantling fencing wire mess not exceeding 4 Kg any type and in any position and separating them the serviceable and unserviceable materials and removing the unserviceable wire mesh from work site as directed and specified.

Supply only chain link MS galvanised fencing, any size or type, complete all as specified and directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire, complete all as specified and directed.

S&f hand rails, half round or other steel section or core for wooden hand rail straight portion, drilled & countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete & screwing etc., wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar works conforming to Fe 290 complete all as specified and directed.

S&f mild steel screw bolts (Machine made) with hexagonal/ square heads at one end and screwed the other/ screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but not exceeding 10cm long dia of shank 11 to 15mm complete all as specified and directed.

M&L TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Applying two coats of synthetic enamel paint on steel and iron surfaces of any description not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide zinc chrome primer, complete all as specified and directed

M&L for preparation of new steel or iron surfaces of any description not otherwise described n exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

Taking down cement plaster on stone wall / brick wall etc including racking out of joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for rendering 15mm thick cement plaster in cement mortar (1:4) mixed with liquid water proofing compound as per manufacturer instructions on fair faces of brick work or concrete surface even and smooth without using extra cement, complete all as specified and directed. Note : Liquid water proofing compound shall be measured and paid seperately

Supply only Liquid water proofing compound, complete all as specified and directed

M&L for 75mm thick plain cement concrete type D2, 1:4:8 (using 40mm graded crushed stone aggragate) as in subbase complete all as specified and directed

M&L for chequered cement concrete tiles of size 20cm x 20cm x 25mm thick each, as in path, floors etc, set and jointed with grey cement and pigment, laid over and including 15mm thick screed bed or bedding layer in CM 1:4, complete all as specified and directed.

M&L for sand filling under floors or in foundation including watering and consolidation, complete all as specified and directed.

M&L for machine pressed precast coloured concrete interlocking paver blocks of any shape and size, confirming of IS-15658 : 2006 of 60mm thick M-35 Grade, laid and jointed with grey cement and pigment, complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and directed.

M&L for brickwork with fly ash modular bricks, straight or curved on plan exceeding 6m mean radius in CM (1:6) complete all as specified and directed

M&L for brickwork with fly ash modular bricks, straight or curved on plan to any radius, built in CM (1:4) as in half brick thick walls, complete all as specified and directed

Notes :- An amount of Rs. 88,150.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum.

M/S MEGA BUILDERS (BID ID -3198048)

MANZOOR AHMAD SHEIKH (BID ID -3196385)

PARVAIZ AHMAD WANI (BID ID -3204747)

M/S RAFIQ AHMAD SOFI AND SONS (BID ID -3204198)

M/S BHAT TRADERS (BID ID -3204319)

M/S ABDUL KARIM RATHER (BID ID -3203758)