REPAIR / REPLACEMENT TO VARIOUS JOINERY ITEMS AND FLY PROOFING OF VARIOUS ACCN IN AOR OF AGE B/R NRC UNDER GE NASIK ROAD.

Amount

Taking down shutters exc 1 Sqm but n exc 2Sqm complete all as specified and directed

Taking down shutters n exc 1 Sqm complete all as specified and directed

Taking down chowkat or frames with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4 sqm each.

Taking down chowkat or frames with shutters (without taking off shutters from the frame) but n exc. 1.5 Sqm

Dismantling timber in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section

S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints

M&L for 2nd class hardwood in scantling exc 13 Sqcm and n exc 25 Sqcm Plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed

S & F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamferesd or rounded, fitted with cut and mitred beads for securing glass etc., for windows and ventilators, etc are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (b) complete all as specified and directed

S&F IInd class hard wood factory made Glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (divided in to square with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mi-tred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Sec-tion 8, cla-use 8.20 (a); supplied and fitted to chowkats complete all as specified and directed

S & F 35 mm thick Second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of apreature 1.40mm and fixed in aluminium windows, wooden doors etc complete all as specified.

M&L for painting with two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces exc 10cm width or girth including preparation of new wooden surfaces all as specified and directed by EIC.

S&F aluminium anodised powder coated (min thickness 50 microns) frame for doors, windows, ventilators, complete all as specifed and directed

S & F Aluminium anodised powder coated window and ventilator shutter, sliding type without sash bar, alumn section section weighing not less than 0.55 kg per mtr incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specifed and directed

S&F Anodised aluminium powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F Sheet glass ordinary quality 4.00 mm thick exc 0.5 sqm each pane with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specifed and directed

S&F Anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. including suitable prelaminated particle board fix in half portion of door shutter complete all as specifed and directed

S&F Anodised aluminium powder coated ventilator with louvers arrangement type without sash bars, aluminium sections (100x25)mm weighing minimum 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, stainless steel wire cloth 0.36mm nominal dia of wire and average width of apreature 1.40mm with 3mm figured sheet glass fixing in louvers complete all as specifed and directed ( Note: aluminium frame, stainless steel wire cloth, sheet glass, louvers arranagement in each ventilator all this measured in Sqm in this item only)

M&L for painting with one coat of synthetic enamel paint on old wooden surfaces exc 10cm width or girth including preparation of old wooden surfaces all as specified and directed by EIC.

M&L for painting with one coat of synthetic enamel paint on old steel surfaces exc 10cm width or girth including preparation of old wooden surfaces all as specified and directed by EIC.

Supply & Fixing in repairs stainless steel curtain rails of 25mm dia metre stops, rollers etc all as specified and directed.

Supply & Fixing in repairs stainless steel brackets for curtain rod of 25mm dia metre with fancy knob stops, hooks etc all as specified and directed.

S&F 100 mm Butt hinges,medium weight cold rolled Stainless steel all as specified & directed. approved by Engineer-in-Charge

S&F stainless steel tower bolt 150 mm long complete all as specified and directed approved by Engineer-in-Charge.

S&F 150 mm stainless steel handels pull type complete all as specified and directed approved by Engineer-in-Charge.

S&F aluminium extruded section body Door closer hydrau lically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed

S&F stainless steel sliding door bolt 300mm long with hasp & staple (bolt type) and fixing chops of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed

S&F in repair Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as directed by Engr-in-charge

M&L for preparation of new steel surfaces and applying two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, girth or width n exc 10cm

M&L for preparation of new steel surfaces and applying two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, girth or width exc 10cm

S&F in repair 18/19 mm thick Prelaminated particle board, interior grade,prelaminated both sides with decorative choice lamination, fixed with screws to timber frame work

S&F 75 mm Butt hinges,medium weight cold rolled Stainless steel all as specified & directed. approved by Engineer-in-Charge

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 35,175.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

VISHAL CONSTRUCTIONS (BID ID -3057936)

Vinod Enterprises (BID ID -3056045)

M/S K. K. Construction (BID ID -3066112)

Bidder Name

M/S K. K. Construction

Vinod Enterprises

Abhiraj Enterprises

VISHAL CONSTRUCTIONS