SPECIAL REPAIRS WORKS TO BLDG NO 108 KARTIK SHED AND PROVN OF ADDITIONAL 05 1000 LITRES CAPACITY PVC WATER TANK IN P-106 DEVELOPMENT BLOCK AT R AND DE E DIGHI PUNE 15

Amount

B/R PORTION Dismantling of steel roof sheeting (corrugated, semicorrugated, etc.) sheets in roof coverings, of any gauge and thickness complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 3 sqm each and removing from site complete all as specified and directed.

Taking down cement plaster from brick / concrete/ stone surfaces including racking out joint , hacking for key and scrubing down with water etc complete all as specified and directed.

Demolition of cement concrete in Roofs, floors (other than ground floors) of any thickness etc including removing existing water proofing treatment (any number of layers) etc complete all as specified and directed.

M&L for 75mm thick cement concrete type C2 1:3:6 using 40mm graded aggregate as in flooring/ plinth protection and finished concrete surfaces even & smooth without using extra cement complete all as specified and directed.

M & L in repair for Granite(of any type) 18 to 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade including noising and rounding edges of stone slab and as specified and direceted.

S & F MS steel work in tubular trusses and tubular posts , including special shaped washers,mild steel screws bolt and steel plates etc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 with one shop coat of zinc chromate primer paint complete all as specified and directed.

S & F 1.25mm thick lath Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, gear operated type with bevel gear box and crank handle complete all as specified and directed.

M&L for Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in ridge, fixed with self tapping screws complete all as specified and directed.

S&F Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc.The sheets shall be opaque or translucent,2 mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified with L-type or J-type or cranked hook bolts in lieu of screw complete all as specified and directed.

M & L Preparation of old plastered surface of wall, applying two coats of exterior acrylic emulsion including preparation of surfaces (at any height including necessary scafolding etc) complete all as specified and as directed by Engineer-in-Charge.

M&L for two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel/iron surfaces exceeding 10cm width or girth complete all as specified and directed

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces of any description in CM 1:6 and finishing the surface with wallcare putty complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces of any description in CM 1:4 and finishing the surface with wall care putty complete all as specified and directed.

M & L for preparation of newly plastered surface of wall, applying two coats of exterior acrylic emulsion over a coat of exterior acrylic primer including preparation of surfaces (at any height including necessary scafolding etc) complete all as specified and as directed by Engineer-in-Charge.

M&L for complete removal of existing treatment including Washing, rubbing down and stopping etc distembered wall surfaces and M&L for two coats of distemper oil emulsion over a coat of primer including wall care putty to make surface even and smooth, preparatory to distempering, priming plastered and other surfaces on existing plastered surface complete all as specified and directed.

M&L for preparation of old distempered surfaces of wall and applying two coats of oil bound distemper complete all as specified and directed.

M&L for one coat of water thinnable cement primer of approved brand and manufacture, on old wall surface complete all as specified and directed.

M&L for preparation of newly cement plastered wall surface and applying two coat of oil bound distemper over chalk whiting, on plastered surfaces, preparatory to distempering complete all as specified and directed.

M&L for applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete all as specified and directed.

M&L for preparation of old painted surfaces of steel & iron of any description over 10cm width or girth and applying one coat of synthetic enamel paint (1st quality) etc complete all as specified and directed.

M&L for providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, hinges/ pivots, fittings wherever required (Powder coated aluminium minimum thickness of powder coating 50 micron) complete all as specified and directed.

M&L for Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment) complete all as specified and directed.

S & F Float glass panes of nominal thickness 4 mm (weight not less than 10 kg/sqm) complete all as specified and directed.

S & F 1000 liters capacity on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete all as specified and directed.

S & F Gun metal gate valve ISI marked with C.I. wheel of approved quality (screwed end) 20mm bore complete all as specified and directed.

S&F PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.20 mm nominal bore, 120 mm long, weighing not less than 198 gms complete all as specified and directed.

S&F PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 20 mm nominal bore, weighing not less than 40 gms complete all as specified and directed.

S&F CPVC pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing, jointing of pipes & fittings with one step CPVC solvent cement and testing of joints 20 mm dia nominal bore complete all as specified and directed.

S&F CPVC pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing, jointing of pipes & fittings with one step CPVC solvent cement and testing of joints 40 mm dia nominal bore complete all as specified and directed.

E/M PORTION Taking down carefully unserviceable sub main wiring including conduit from ground etc complete all as specified and directed.

Taking down unserviceable DBs/MCB SP/SPN/Isolator of any rating & size carefully and making good disturbed surfaces complete all as specified and directed.

Taking down Copper/ aluminium point wiring (light/ fan/socket or power) complete including fixture and fittings such as switches, sockets, ceiling roses pendent / brackets holders, regulators etc removing material for taking credit and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M & L Point wiring for light point with 1.5 sqmm FRLS PVC insulated copper coductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc all as specified and directed for the following :- (a) One light point controlled by one switch.

(b) One fan / Exhaust fan point controlled by one switch and one regulator.

-Ditto- as per Sr Item No 36.00 above but with 2 x1.5 sqmm FRLS PVC insulated copper conductor single core cable + 1x1.5 sqmm FRLS PVC insulated copper conductor single core cable for earthing for one 3 pin switch socket outlet point 5 Amps complete all as specified and directed.

-Ditto- as per Sr Item No 36.00 above but with 2 x 2.5 sqmm FRLS PVC insulated copper conductor single core cable + 1 x 2.5 sqmm FRLS PVC insulated copper conductor single core cable for earthing for one 3/6 pin switch socket outlet point 15 Amps complete all as specified and directed.

Supply and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etcs as required complete all as specified and directed.

Supply and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etcs as required complete all as specified and directed.

S & F ceiling rose, 3 phase, PVC polycarbonate, insulated body (Make. Anchor / Plaza / Standard) complete all as specified and directed.

Supply and fixing in replacement of existing unserviceable T/L fitting 36/40 W on existing pole/wall with LED light fitting 18/20 watts with LED tube rod, ready to use pack with necessary braket, clamps, incl. bolts, nuts & washers for fixing arrangement etc complete all as specifed and directed by Engineer-in-charge.

S & F LED street light 30 W building security light pressure die cast aluminium housing with high power LEDs, lens, & toughened glass, with IP 66 and bracket, nut, bolt, clamp etc including all accessories and fixing arrengenment complete all as specified and directed by Engr-in-charge.

M&L for wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (a) 2 x 1.5 sqmm + 1 x 1.5 sqmm earth wire

(b) 4 x 6 sqmm + 2 x 6 sqmm earth wire

S & F MCB DB VTPN 4 ways,with metal double door ,IP -43 protection suitable for MCCB as incommer and MCB as out going,VTPN DB's 415 volt 3 phase complete with appropriate size copper bus bar and neutral link as required at site and including cutting chases to wall for fixing of DB and making good distrubed wall/surface all as required at site i.e directed by Engr-in charge.

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. complete all as specified and directed.

S & F MCB, single pole, 240 volts, 6 to 32 Amps, complete all as specified and directed.

S & F MCCB Triple pole, 415 volts, 125 Ampere, rupturing capacity 16 KA, complete all as specified and directed.

S&fix Tripal pole earth enclosure with threepin and earth plug with socket complete including one triple pole MCB 32 AMPS complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core including excavation/eathwork complete all as specified and directed.

M & L Earthing complete with galvanised steel earth plate electrode 60x60cmx06mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for earth conductor electrode, including connection/ termination with G.I thimble etc as required complete all as specified and directed.

S & F of lightning conductor finial, made of 25 mm Dia 300mm long G.I. tube having single prong at top with 85mm dia 6 mm thick G.I. base plate including holes etc. complete all as specified and directed.

S & F aluminium strip 25mm x 3mm complete with saddles and fixing screws complete all as specified and directed.

Suypply and laying G.I. tape 32mm x 6mm from earth electrode directly in ground as required complete all as specified and directed.

Mukund Engineers and Contractors (BID ID -3157601)

Shri Sant Cosntruction (BID ID -3162466)