VILLAGE JALALGARH BLOCK MALERKOTLA 1 DISTRICT SANGRUR UNDER PRWSSIP SUB COMPONENT 2Ai AND JJM

Amount

Component -1

Providing and installing Testing & Commissioning of One No. Electrically driven Submersible Pumping set of reputed make capable of delivering 368 LPM against a head of 79 mtr (12.50 BHP) along with including G.I. Column Pipe of suitable size 80mm=60 mtr (in 3 mtr lengths each with flanges, screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable (reputed make) complete in all respect as per standard Specifications. Including cost of sub. cable 4mm2 = 120mtr.

Repair of Pump Chamber

White washing scraping inside of Pump Chamber.

Scraping of snowcem robbiacem etc.

White washing 2 coat inside of Pump Chamber.

Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. on old work one coat to give even shade.

Applying Pink Primer or-aluminium priming coat including preparation of surface With special quality paint.

Scraping of plastering of Pump Chamber.

Plastering 1:4, 12.5mm thick on Pump Chamber.

Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.

Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of Paris and chalk mitti including finishing the surface to the required finish complete. Inside pump Chamber.

Distempering with dry distemper of approved manufacture one coat on old distempered work.

Applying priming coat with methal primer on new steel or iron work incluing preparation of surface and Painting one coat with aluminum paint on old work to give an even shade.

Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make.

Relaying Terracing consisting of tiles 22.86cm×11.43cum×3.83cm laid over25mm mud plaster, 7.50 cm mud filling on an other layer of 25mm mud plaster with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc.

Conglomerate floor 40mm thick cement concrete 1:2:4 using mechanical mixer for mixing of material for plinth protection.

Hollock wood doors shutter windows including Hinges, Screws, Chocks, Cheats, Stops cords etc. complete fixed in position. (a) panelled, glazed or glazed and panelled. i) 40mm thick Door & windows

Repair of electric fitting complete in all respects.

Painting of GPWSC by laws.

Repair of OHSR

Repair of Expansion Joint. Size 100 mm i/d complete in all respects.

Repair of Expansion Joint. Size 80 mm i/d complete in all respects.

P/F OHSR Jali complete in all respects.

Providing & fixing aluminium ladder inside the tank.

MS Cover complete in all respects.

Repair of wall leakage including scraping & plastering complete in all respects.

Repair of stair case complete in all respects.

Conglomerate floor 40mm cement concrete topping 1:2:4 for plinth.

Providing & fixing railing complete in all respects.

Providing & fixing angle pickets complete in all respects.

Painting of OHSR pipes including cost of labour & material complete in all respects.

Painting of OHSR stair case railing and pickets including cost of labour & material complete in all respects.

Repair of Water Works

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects

Providing & fixing angle iron pickets with angle 40mm x40mm x 6mm including cost of concrete block & painting complete in all respects as per standard Drawing D-8 & (as per Analysis A-6).

Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing D-7 & Analysis A-7.

Repair of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects.

Construction of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per standard Drawing D-3.

Repair of main gate pillars complete in all respects.

Providing and laying 50 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine will stronge vibratory compaction and of approved size and design/ shape laid in ordinary grey colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc & including cost of Carriage all complete as per directions of Engineer-In-Charge with masonary toe wall & Earth filling inside the water works including precast kerb both side complete in all respect.

Cement concrete 1:8:16 with 40 mm gauge stone aggregate to be used instead of brick ballast for footpath.

Conglomerate floor 40mm cement concrete topping 1:2:4 for footpath.

Painting one coat with aluminum paint on old work to give an even shade. Main Gate of w/w = 3.34 sqm Pickets = 20 x 0.22 = 4.40 sqm Total = 7.74 sqm

Finishing walls with cement based water soluble exterior paint such as snowecem, robbiacem etc. on old work one coat to give an even shade.for main gate piller & corner piller.

Providing, installing, testing & commissioning one no. Electrically actuated, diaphragm operated, Metering system, chemical dosing Chlorinator, suitable for delivering 0.5 to 0.6 litres of bleching powder solution/ sodium hypo solution per hour under maximum delivering pressure upto 7 kgcm^2 and suction lift not less than 1.5m as per DWSS standard Specification.

Repair and minor Replacement of existing pipe line

Provision for making new connection with exit pipe line as per analysis A-20 complete in all respects.

Supplying,fixing and testing at site Automatic electronic type water level indication system with gun metal float sensor and electrical cable suitable for three phase pump submersible / monoblock to be fixed on existing panel for OHSRs complete in all respects.

Improvement in exisitng connections

Repair of old house connections complete in all respects.

Component -2

Providing proposed water connection on existing pipe line to house hold up to wall with providing, laying jointing, testing G.I pipe lines 15mm i/d=2.50 mtr (as per CSR 28.36 (a)) & MDPE pipe 15mm i/d = 2 mtr including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground, 15mm i/d G.I. Union & ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3'' i/d clamp with c.i. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approvel make as per CSR 30.65 (b) complete.

Component -3

Providing, Laying, fixing & jointing of PVC Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing including excavation & back filling complete as per specifications for more than 3 mtr street width included excavation.

PVC pipe 63mm o/d 6Kg/sqcm

Dismantling of cement concrete 80mm thick cement concrete 1:2:4 over 100mm thick C.C. 1:8:16 and making good the same to its original condition complete in all respects as per analysis A-25.

PVC pipe 63 mm o/d

For connections

Dismantling & restoration of interlock tiles complete in all respects.

PVC pipe 63 mm o/d

Painting on Board both sides including priming coat, printing & Map as per Water Supply & Sanitaton standard.

Cost of Component-4 (Operation and maintenance)

Provision for sodium chloride for disinfection of water Complete in all respect.

Credit of old machinery complete in all respects (-)