Electrical renovation work and providing new fire alarm system at LHC-A in NITK

Amount

Supply of LT UG cable: Supplying LT UG cable of following size having aluminium conductor PVC insulated sheathed galvanized, XLPE, steel wire / steel tape armoured cable with PVC outer sheathing 1.1KV class (conforming to IS 1554) Class 'A' PVC cables, HAVELLS/ UNISTAR/ GLOSTER / POLYCAB / UNIVERSAL / NICCO/ SBEE/ TORRENTO/ CCI - Tropadar make.

3.5 core x 120 sq.mm:

3.5 core x 50 sq.mm:

3.5 core x 25 sq.mm:

4.0 core x 16 sq.mm:

Digging trench: Digging a trench of 0.6M deep X 0.50M wide, refilling the trench to the required ground level and consolidation etc., complete. – in hard soil.

Laying UG cable: Labour charges for laying of following size 1.1 kV class UG cable in existing trench, GI pole / stone ware pipe / on wall / structure/on pole as required.

95 Sq.mm to 120 Sq.mm (in trench)

25 Sq.mm to 75 Sq.mm (in trench)

16 Sq.mm ( on wall)

Heavy duty cable glands: Supplying and fixing of following size heavy duty cable glands suitable for UG cable of 1.1KV class ( metal only )

45mm dia

32mm dia

Copper lugs: Supplying tinned copper lugs and crimping and wiring to terminal point for wire of following size. Make: Dowells / Braco / Ravi / Jainson

120 Sqmm Long barrel

70 Sqmm Long barrel

50 Sqmm Long barrel

25 Sqmm Long barrel

16 Sqmm Long barrel

Straight through cable joint: Supplying and making straight through cable joint with epoxy resin including ferrules and other jointing materials for PVC insulated and PVC sheathed steel tape, wire armoured aluminium conductor cable of 1.1 KV grade of the following size

3.5 x 120 Sq.mm

Power board Panel – 16 SWG: Fabricating supplying and mounting MS box made out of 16 SWG suitable for floor / wall mounting, fully weatherproof with provision for better heat dissipation, provided with hinged front cover, equipped with tamperproof locking arrangements, with suitable size clamps with necessary cable entry with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled paint etc., complete.

Panel board indicating lamp: Supplying and fixing LED type panel board indicating lamp with required colour suitable for 220V AC 50 Hz 12/24V D.C

Moulded Case Circuit Breaker (MCCB): Supply and fixing following rating Moulded Case Circuit Breakers (MCCB) with spreader over the existing wood / panel board using necessary screws, bolts, nuts and wiring complete. Makes: L&T / ABB / Siemens/HPL/ LEGRAND/ MG make.

250A, 35kA, Four pole MCCB

125A, 25kA, Four pole MCCB

Bus-bars: Supplying following rating 3 phase with neutral busbar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic / FRP/DMC insulator which are mounted on powder coated 40X6mm MS flat framework in existing panel board. The bus-bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc complete. 400 amps (4 x 50x10mm aluminium Strips)

Digital meter with three line back light LCD type Display: Supplying of multi-function Digital meter with three line back light LCD type display for voltage, current, frequency, power , power factor ,KVA, KWH, KVAR suitable for three phase 4 wire, LT network with IP 54 degree of protection and completely wired as required with communication Port and class 0.5s accuracy.

MS angle iron frame work: Supply and fixing following size MS angle iron frame work for mounting panel board with bolt and nuts, painted with two coats of anti-corrosive enamel paint over two base coats of red-oxide priming coat

50x100x50x6mm – C Channel

50x50x6mm angular

CT: Supply, fixing and wiring 50/5 to 400/5 amps 5VA burden current transformer. Class 0.5 accuracy with tape wound

GI Strip: Supplying and running of GI strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip

Perforated cable tray: Supplying and fixing 2mm thick 150 x 50 mm size perforated cable tray with powder coated paint on existing MS angle support using necessary GI bolts/nuts and washer or welding as required

8way vertical type MCCB Distribution panel: Supplying and fixing regular 8 way vertical MCCB distribution Panel confirming to IS 8828, on wall / wood board/flush mounting using required clamps, bolts , nuts etc with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440 volts 3 phase 4 wire powder coated painting etc, complete with a provision for fixing of single/three phase suitable capacity MCCB/MCB's as outgoings confirming to IS8828, naming of DB's etc complete. Make: ABB / LEGRAND / SIEMENS / L&T / SCHNIDER

MCB Distribution board: 12 way SP & N double door DB: Supplying and fixing 12 way SP & N double door regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting, naming of DB's etc., complete.

miniature circuit breakers: Supplying and fixing following rating miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C type curve, indicator ON/OF, energy cross-3 with short-circuit breaking capacity of 10K and wiring complete as required. Make : Group A :- ABB / LEGRAND / L&T

63 Amps TPN MCB

32 Amps TPN MCB

5-32 Amps DP MCB

5-32 Amps SP MCB

Earth Leakage Miniature Circuit Breaker (ELMCB): 32-40A 4pole: Supply, fixing and wiring 32-40 Amps 4 Pole earth leakage miniature circuit breaker (ELMCB) 450 volt up to 300 mA sensitivity on existing panel board. Make: ABB/Legrand/L&T

20Amps SP&N Metal socket set of 2 pole: Supplying and fixing of 20Amps SP&N Metal socket set of 2 pole and earth plugs and socket for incorporating 32A DP MCB. The entire plug and socket shall be mounted in a thermoplastic / powder coated metal box & wired completely. Make :- Legrand / L&T / Havells / HPL / ABB

Point wiring using copper wire without switch: Point wiring using Class A materials Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand FRLS 2x1.5 Sqmm copper wire confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose length in a wood / PVC round block complete for each outlet.

Short point up to 3mtr from tapping point to out let via switch

Medium point above 3mtr upto 6mtr from tapping point to out let via switch

Long point above 6Mtr up to 10Mtr from tapping point to out let via switch

Two outlet in a row above 3Mtr up to 6Mtr from tapping point to out let via switch

Open PVC conduit wiring: Supplying heavy gauge PVC conduit pipe of following size confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering damaged portion using heavy gauge saddles at an interval of 700 mm using WF screws. White / black coloured as applicable. Make: VIP / Avonplast / Universal / Classic

40mm dia 2mm thick

20mm dia 2mm thick

Concealed conduit system: Supplying heavy gauge PVC conduit pipe of following size with suitable size bends, metal junction boxes, adhesive etc., by grove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto wall surface and run with 18 SWG fish wire run through the conduit wherever necessary. Make: Modi, Clasic, Kaveri

25mm dia 2mm thick

20mm dia 2mm thick

PVC Casing & Capping : Supplying and fixing of following sizes ‘class A’ make PVC casing and capping on the wall or ceiling using necessary materials like bends, screws at an interval of 300mm etc as required. Make: Modi/ Classic/ Kaveri/ Polycab/VIP/Avonplast

20mm size PVC casing and capping

25mm PVC casing and capping

Wiring for Power circuit: Wiring for power circuit using 4 x 10.00 sq. mm. + 1 x 2.5 sq.mm. of PVC insulated 1100V grade multistrand FRLS copper conductor single core cable in open or concealed system of wiring. Make:Finolex,RR cable, polycab,v-guard

Wiring for Lighting/ power circuit: Wiring for Lighting/ power circuit using 2 x 2.5 sq. mm. + 1 x 1.5 sq. mm. of PVC insulated 1100V grade multistrand FRLS copper conductor single core cable in open or concealed system of wiring.

Wiring for Lighting/ power circuit: Wiring for Lighting/ power circuit using 2 x 4.0 sq. mm. + 1 x 1.5 sq. mm. of PVC insulated 1100V grade multistrand FRLS copper conductor single core cable in open or concealed system of wiring.

Wiring for Lighting/ power circuit: Wiring for Lighting/ power circuit using 2 x 1.5 sq. mm. of PVC insulated 1100V grade multistrand FRLS copper conductor single core cable in open or concealed system of wiring.

UTP-CAT 6E LAN cable: Supplying and Drawing UTP-CAT 6E LAN cable Make: D link, Finolex, RR cable

Telephone cable: Supplying and drawing 1 pair PVC flexible telephone un-armoured tinned copper cable of Finolex / DOT approved makes.

2 C x 1.5 Sqmm Flexible Multicore cable: Supplying and drawing 2 C x 1.5 Sqmm Flexible Multicore cable manufactured with electrolytic grade copper with flexible copper conductor confirming to table 3 class 5 of IS:8130-1984 and PVC insulation and sheathed suitable for working voltage upto 1100 Volts as per IS:694:1990 & confirming to GTP of Group B. including cost of materials, labour, HOM complete as per specifications

Polished Wooden board: Supply and fixing polished wood board of following size made of not less than 15mm plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.

Switch boards : Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / CC wall. Make : Anchor / ABB / L&T / Havells / Legrand / MK / Schneider

Modular switch mounting polycarbonate plate: Supplying and fixing following type superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws, bolts, nuts, blank plates etc complete on the existing metal / PVC box Make : Anchor / ABB / L&T / Havells / Legrand / MK / Schneider

12/16 module

8 module

1-3 module

Modular switch: Supplying and fixing following items on existing modular switch plate as per IS 3854 and IS 1293 make : switch & socket :- Anchor woods / anchor roma / ABB / L&T / Havells / Legrand RJ45 socket :- D link or equivalent

6 amps one way switch

6 amps two way switch

6 amps three way socket

Stepped fan regulator

RJ45 / I.O outlet

telephone socket

6 amps backelite ceiling rose

Power / UPS board: Supplying and fixing of power/UPS board consisting of 12 modular galanized metal box with superior quality modular switch mounting polycarbonatae plate consisting of 3 nos of 16 Amps switch and 3 no of 16 Amps socket, dummy plates etc complete. Make: Legrand, anchor roma ,mk

Fixing fittings: Fixing all types all capacities fluorescent / false ceiling / spot light / CFL/LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required nos. of round blocks, clamps, necessary scaffolding, tools & labour complete.

On wall / ceiling / rafter / girders / false ceiling

Fixing fittings using necessary length of GI Chain: Fixing all types and all capacities fluorescent / false ceiling / spot light / CFL/LED fittings indoor on the / ceiling rafters/ girders using necessary length of GI Chain and 23/0.0076" twin twisted PVC insulated wires, required nos. of round blocks and clamps ( if required )

GI pipe -19mm dia: Extra length of GI pipe of class B – 19mm dia for down rod

"S"hook / anchor hook : Supplying and fixing "S"hook / anchor hook made out of 14mm dia rod for fixing ceiling fans in concrete slabs / beams.

Fixing of Ceiling fan: Fixing a ceiling / wall mounting fan of all capacities and all types with necessary clamps, angular, / to the existing S hook, with fan regulator, together with supplying and fixing a 5 ampere ceiling rose, necessary length of 23 / 0.0076” PVC insulated twin twisted copper wire and wiring complete.

Fixing exhaust fan: Fixing one departmentally supplied exhaust fan with mesh, clamps, iron frames in the nitch already left in the wall with bolts and nuts and 5 amps ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.

Supply and installation /fixing/ provision of pole Box with HRC fuse/MCB: Supply and installation /fixing/ provision of pole Box with HRC fuse/MCB provision and suitable connector/terminal for 3 phase / 1 phase connections with Loop in & Loop out terminals for 10 Sq. mm / Sq. mm C Al/Ar/Cu/Ar Cable, enclosed I a Thermoplastic, Polystyrene enclosure, witch should be shock proof safe IP65, Dust Proof, water proof having Internally embedded gasket with provision for cable Entry through IP 65 thermoplastic polyamide glands and grommets 260 mm x 210 mm x 116 mm

Supply and installation/fixing/ provision of Outdoor type Thermoplastic Modular Panel: Supply and installation/fixing/ provision of Outdoor type Thermoplastic Modular Panel enclosure with Transparent Polycarbonate Lid, shock proof, IP65(weather proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single phase/ three phase energy meter in suitable base plate including 4 way connecting terminals and having a provision for Busbars and Fuse / MCB cutout with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility.

Solar lux level street light control switch: Supplying and fixing of solar lux level street light control switch three phase including suitable capacity contactor and Digital Timer

GI Pipe bracket: Supply & fixing 32mm dia. class A GI pipe bracket up to 2.70 mtrs long terminated with a reducing collar of 40x25mm to which extra 175mm length is fixed bent at suitable angle and fixing to this bracket MV/SV/MH/FTL street light fittings of all capacities to GI or rail or RCC pole / wall using suitable clamps, bolts and nuts and wiring using capacity wires complete.

Fixing of street light/flood light: Fixing of Departmentally supplied street light/flood light fitting over existing pole/ wall ceiling including necessary scaffolding, clamps bolt nuts and wiring using suitable capacity wires

12 W LED Post top Lantern: Supply of 12W LED post top lantern / pathway light with system 12 wattage, housing & frame shall be of powder coated, die cast aluminium, diffuser with high density polyethylene IP65 EPDM gasket. Life 50000hrs. @ L70 shall be confirming to IS 10322/part 5/ section 5 @ 230V. 5 years warranty against any manufacturing defect working under standard electrical condition. Make : Phillips / Havells / Bajaj / CG / Equivalent

Fixing of Post top lantern : Fixing post top lantern on the existing CI/GI or any other pipe using required size of reducer wiring using suitable capacity wires, necessary foundation work complete.

Chemical earthing: Chemical earthing for grounding, conduits, IC cut outs & other equipments on the meter board by using copper bonded/ SS rod with earth enhancing backfill compound which is non corrosive, thermally conductive, potential to permissible limits, superior fault conduction capacity, non toxic, weather resistance & capable of achieving ohmic value less than one ohm including concrete chamber and naming of earth pits. Using 6 ft copper bonded rod with backfill compound

Supplying and fixing of LT Route , Joint indicating slabs at an intervals of 10 mtr (LT CABLE)

Shifting of existing lighting panel: Dismantling the existing lighting panel from LHC-B building and Shifting, installing, wiring and testing in LHC-A building. Work includes necessary labour, tools & plants, transportation charges, welding works etc complete.

Supplying installation testing and commissioning of micro process base Fire alarm Control panel having power regulation circuit, which Conner to 230V AC to @VDC indicating fire fault. Isolation with feather touch push button switches, Test facility also with work test facility arrangement, provided in the panel. All this electronic circuits component are assembled in MS 16-gauge suitable panel cabinet with glass fronted and locking arrangements including cost of all materials etc. including cost of materials, labour, HOM complete as per specification 8 zone Make : Ravel/ Global/Royal

Supplying installing, testing and commissioning of smoke/Heat detector photo electric type detector with base LED indicator on smoke detector fixed cum rise temperature type heat detector with base make applow / System Sensor complete including cost of materials, labour, HOM, compete as per specifications

Supplying, Installing, testing and commissioning of Manual call point It consists of micro push button switch LEXD and circutary etc. works on 24V DC LED indicator with glass fronted, Also with hammer for breaking the glass incase of Fire. Accommodated in 75x75x30mm size MS 16 gauge red enamel painted box make/golbe. complete including cost of materials, labour, HOM complete as per specification Make : Ravel/ Global/Royal

Supplying installing, testing and commissioning of electronic hooter, it consists of electronic circuit to give dual fire alarm sound with works 24V DC with speaker all enclosed in suitable in MS 16 gauge red painted box. Complete including cost of materials, labour, HOM complete as per specifications. Make: Ravel/ Global/Royal

SITC of 7 AM-12V Battery for fire alarm system Make: Exide / Amco

Supplying of four bucket stand along with fire buckets

Supplying of First Aid box

Supplying of electrical first Aid Chart with lamination

Supplying and installation of RUBBER MAT 1 mtr x 1 mtr - 10 mm thick. Complete including cost of materials, labour, HOM complete as per specifications

M/s Anugraha power services

ADITYA ENTERPRISES

DSOUZA ELECTRICALS

Vachan Electricals (P) Ltd

SRS ELECTRICALS