Tender ID

Karnataka

Retender

Works

Buildings

CONSTRUCTION OF SAMUDAYABHAVANA AT SRI SIDDARAMESHWARA MATA GODEKERE IN CHIKKANAYAKANAHALLI TALUK TUMKUR DISTRICT (STAGE 2)

Public Works Department

PWD Division Office Tumkuru | Karnataka

Amount: Refer DocsCloses: 29 Dec 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published20 Dec 2024
Closed29 Dec 2024
Retendered20 Dec 2024

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 20 Dec 2024

Tender Value

Refer Docs

EMD Value

₹5.6 L

Closing Date

29 Dec 2024, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

EXECUTIVE ENGINEER

Office Number

Work Description

CONSTRUCTION OF SAMUDAYABHAVANA SRI SIDDARAMESHWARA MATA GODEKERE IN CHIKKANAYAKANAHALLI TALUK TUMKUR DISTRICT (STAGE 2)

Tender Information

Tender ID

PWD/2024-25/BD/WORK_INDENT16892

Reference Number

PWD/2024-25/BD/WORK_INDENT16892

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Tumkuru

Source Website

Subscribe to view

Documents Required

9 documents required · 9 mandatory

Technical Bid

RequiredAnnual Turnover Certificate

RequiredKPWD Registration Certificate

RequiredLine of Credit

RequiredWork Done certificate

RequiredMacheneries

RequiredQuantities 2019-20 to 2023-24

RequiredBid Capacity as per Bid Document

RequiredElectrical License and Workdone with consent letter

RequiredWater Supply License and Work done Certificate

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidder,s end.

Conditional tenders will not be accepted.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs

The cost of the Tender processing fee shall not be refundable.

The employer is not responsible for any delay in accessing KPPP Portal.

Royalty on construction materials and other taxes will be deducted as per prevailing Govt. orders.

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons.

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents KW-4 P.W.D. and further orders there on.

In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work

Contractor should establish a fully functional laboratory at site at no extra cost in order to carry out all the required tests for the materials being used in the project

Contractor should take all precautions to ensure that no damage is caused to the existing canal CD works and other similar structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost.

Contractor should carryout additional test required to test the suitability of materials including borrow area before using the same either as sub-grade or base course materials.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Formation levels and other data furnished are bare minimum. the contractor should make all efforts to validate and to get additional data if required at his own cost.

Contractor should execute the project with least impact to the environment especially during earthwork, etc relevant to Building work

Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, PWD, Division, Tumkur during office hours on all working days.

Materials like steel, cement etc., required for the work shell be procured by the tenderer themselves and should got tested by the quality control authority before use on the work at their own cost.

The contractors assessed available tender capacity will be calculated as per the clause 3.5 of STD tender document Attached.

All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and conyence of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer - in - charge of this work.

When embankments are constructed disputes arising on account of damages to the existing field / channels, bunds and other private properties, if any, has to be resolved by the contractor. All precautions should be taken by the contractor so that there are no damages to such public private properties

Contractor should take all precautionary measures to avoid any damage to the utilities during excavation as well as utility shifting. To that extent the contractor should indemnify the client.

Contractor should follow strictly the prevailing rules of labour act.

The tenderer who quotes amount less than amount put to tender should pay difference amount in the form of FDR purchased through any nationalized / scheduled bank payable in favor The Executive Engineer at the time of execution of the tender agreementNote:- If any postponement of receipt date of tender, the same will be published in the KPPP protal portal

All the originals of uploaded documents in e-portal should be produced within 7 working days from the date of opening of Technical Bid at the Division Office, failing which the tender is liable for rejection. No separate communication will be made in this regard, failing which action will be taken as per tender conditions and registration rules

The contractor who participates in tenders for more than one work for which tenders are invited in this IFT, the tenderer must fulfill all the conditions and criteria cumulatively for the participated works.

LOC / K-form for the stipulated amount should be submitted in the format as prescribed in the bid document only. Otherwise tender is liable for rejection.

The returns submitted to the I.T. along with the Profit and Loss account statement,Balance sheet should be uploaded for the financial turnover criteria attested by registered Chartered Accountant.

Increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time.

Contractor should follow strictly the prevailing rules of labour act. Contractors are directed to employ only the labours who are registered in Labour Department, if the labours are not registered, they are to be registered before employing them to the work.

Unconditional Line of Credit for the stipulated amount should be submitted in the format as prescribed in the bid document only. Otherwise tender is liable for rejection.

Contractors participating in the bid should submit Original Line of Credit of the copy uploaded through KPPP Portal with in one week after the last date of receipt of tenders. failing which their technical bids will be rejected.

For the vehicles/machineries/ equipments for which RTO registration is statutory,for such vehicles/machineries / equipments the contractor should upload the Registration Certificate documents issued by RTO. For machineries and other equipments for which RTO registration is not applicable, for such machineries and equipments, purchase invoice document should be uploaded. If there is sale deed for such machineries and equipments, original invoice along with registered sale deed should be uploaded.

Contractors should be registered with KPWD Class II & above Registration.

Within 20 days of receipt of the Letter of Acceptance, the successful Tenderer shall deliver to the Employer a Security deposit in any of the forms given below for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with Clause 25.5 of ITT and Clause 44 of the Conditions of Contract. :

All the rates in the amount put to Tender are inclusive of all taxes, except GST. GST will be paid separately. As per the GO no FD 417 EXP.12/2024.

Technical Criteria

General

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

Satisfactorily completed (atleast 90%) as prime contractor, at least one similar nature of work value not less than Rs. 186.34 Lakhs. (50% of estimated cost of tender)

Work Done Certificate

3.2(c) To qualify for award of this contract, each Tenderer should have in the last five years i.e. (2019-20 to 2023-24) executed in any one financial year, the following minimum quantities of work 1)EARTHWORK EMBANKMENT in Cum 1015.68 2) PCC/RCC/M30 in Cum 737.87 3) SIZE STONE MASONARY& BBM in Cum 336.68 4) TMT STEEL in Tonnes 7.82 5) PLASTERING in Sqm 3759.64 6) ALL TYPES OF FLOORING/SKIRTING/DADDOING in Sqm 2484.67 7) PAINTING in Sqm 5836.62 8) WMM/GSB in Cum 406.32

Work Done Certificate

3.2(d) Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs.22.57 Lakhs (not less than 50% of electrical works) n any one year

Work Done Certificate

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. 15.17 Lakhs (not less than 50% of Plumbing works) n any one year

Work Done Certificate

3.5 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity(AXNX1.5-B)Where A-Maximum value of civil engineering works executed in any one year during the last five years (updated to 2024-25 price level) taking into account the completed as well as works in progress N-Number of years prescribed for completion of the works for which tenders are invited B-Value, at 2024-25 price level, of existing commitments and on-going works to be completed during the next 11 months (Including Rainy Season) Period of Completion of the work for which Tenderer s are Invited.

Others -- Bid Capacity

Capabilities of Vendor

Owning the following key and critical equipment for this work Machineries to be Owned 1) Concrete batch mix plant/Rotovator of suitable specification-1no 2)Tipper-2no 3)Mechanical Concrete Mixer wit Hopper-2no 4)Pin and Needle Vibrators-2no 5)Excavator-1no 6)Water Tanker-2no 7)Centering Materials-250 SQM 8) Plate Vibrators-2no Machineries to be Owned/Hire/Lease 1)Tipper-2no 2)Mechanical Concrete Mixer wit Hopper-2no 3)Pin and Needle Vibrators-2no 4)Excavator-1no 5)Water Tanker-2no 6)Centering Materials-250 SQM 7) Plate Vibrators-2no

Others -- Machinaries

KPWD Registration Certificate Class II & above

PWD Registration Certificate (Class I/II/III/IV)

Financial Status

3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e 2019-20, 2020-21, 2021-22, 2022-23 & 2023-24(a)Achieved in at least two financial years a minimum financial turnover (in all classes of Civil Engineering construction works only of Rs 745.35 Lakhs with UDIN number certified by Charted Accountant Note- The returns submitted to the IT along with profit & loss account statement, balance sheet should be uploaded for the financial turnover criteria.

Audited CA Certificate of Annual Turnover

ITT 3.3(b) Liquid assets and /or availability of credit facilities of no less than Rs.102 Lakhs (estimated cash flow for 3 months of peak construction period)

Line of Credit

Work Locations

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹5.6 L

Important Dates

Last Activity

20 Dec 2024

Published

20 Dec 2024

Bid Opening

1 Jan 2025

Download Ends

26 Dec 2024

Pre-Bid Meeting

26 Dec 2024

BOQ Preview

•

CONSTRUCTION OF SAMUDAYABHAVANA AT SRI SIDDARAMESHWARA MATA GODEKERE IN CHIKKANAYAKANAHALLI TALUK TUMKUR DISTRICT ( STAGE 2)

•

Mechanical Means -

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

•

Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement...

•

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement ...

•

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Su...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...

•

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

•

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic E...

•

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end ...

•

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings ...

•

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...

•

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,...

•

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

•

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including co...

•

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off c...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remo...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint...

•

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly clean...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manuf...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and...

•

Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm

•

with suitable washers weighing not less than 33 gms ---- Item including cost and conveyance of of all materials, lead and lift ...

•

Providing and fixing bright finished brass tower bolts (barrel type) with

•

necessary screws etc. complete : 250x10mm ---- Item including cost and conveyance of of all materials, lead and lift charges l...

•

Providing and fixing bright finished brass tower bolts (barrel type) with

•

necessary screws etc. complete : 150x10mm ---- Item including cost and conveyance of of all materials, lead and lift charges l...

•

Providing and fixing bright finished brass butt hinges with necessary screws

•

etc. complete : 125x85x5.5 mm (heavy type) ---- Item including cost and conveyance of of all materials, lead and lift charg...

•

Providing and fixing bright finished brass butt hinges with necessary screws

•

etc. complete : 100x85x5.5 mm (heavy type) ---- Item including cost and conveyance of of all materials, lead and lift charg...

•

Providing and fixing bright finished brass handles with screws etc. com- plete: brass handles 125 mm with plate 175x32 mm ---- Item including cost and conveyance of of all materials, lead and lift cha...

•

Providing and fixing bright finished brass handles with screws etc. com- plete: brass handles 100 mm with plate 150x32 mm ---- Item including cost and conveyance of of all materials, lead and lift cha...

•

Providing and fixing bright finished brass hanging type floor door stopper

•

with necessary screws, etc. complete. ---- Item including cost and conveyance of of all materials, lead and lift charges load...

•

Providing & Fixing of High Acoustical False Ceiling having NRC (Noise Reduction Coefficient) 0.90 (minimum) using Integral Densified edged Eco Friendly Fully Perforated Lightweight Calci...

•

Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers ...

•

Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain wate...

•

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for t...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing & fixing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete as per design d...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing Size Stone masonry with hard stone in foundation & plinth with

•

Cement mortar 1:6 (1 cement : 6 coarse sand) ---- Item including cost and conveyance of of all materials, lead and lift charges...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off c...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manuf...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, incl...

•

Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & ...

•

Providing Size Stone masonry with hard stone in foundation & plinth with

•

Cement mortar 1:6 (1 cement : 6 coarse sand) ---- Item including cost and conveyance of of all materials, lead and lift charges...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...

•

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore ---- Item including cost and conveyance of of all materials, lead and lift charges loading and unloading charges labour cha...

•

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- Item including cost and conveyance of of all materials, lead and lift charges loading and unloading charges la...

•

Providing and fixing C.P. brass angle valve for basin mixer and geyser

•

points of approved quality conforming to IS:8931 ---- Item including cost and conveyance of of all materials, lead and...

•

Providing and fixing brass full way valve gate with C.I. wheel of

•

approved quality (screwed end) : 25 mm nominal bore ---- Item including cost and conveyance of of all materials, lead and l...

•

Providing and fixing brass full way valve gate with C.I. wheel of

•

approved quality (screwed end) : 32 mm nominal bore ---- Item including cost and conveyance of of all materials, lead and l...

•

Providing and fixing brass full way valve gate with C.I. wheel of

•

approved quality (screwed end) : 50 mm nominal bore ---- Item including cost and conveyance of of all materials, lead and l...

•

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore ---- Item including cost and conveyance of of all materials, lead a...

•

Providing and fixing mirror of superior Glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular...

•

Providing and fixing Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class-Economy ---- Item including cost and conveyance...

•

Providing and fixing 600x120x5 mm Glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws,...

•

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cuttin...

•

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

•

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, w...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pip...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) with C.

•

I. surface box 100x100 x75 mm (...

•

Providing and constructing WIRE CUT BRICK MACHINEHOLE CHAMBERS using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approve...

•

Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete ---- Item including cost and conveyance of of all materials, lead and li...

•

Providing and fixing PTMT grating of approved quality and colour.- Circular type - 125 mm nominal dia ---- Item including cost and conveyance of of all materials, lead and lift charges loading and unl...

•

Providing and fixing toilet paper holder : C.P. brass ---- Item including cost and conveyance of of all materials, lead and lift charges loading and unloading charges labour charges all incidental cha...

•

Providing and fixing Soap dish wired with 200mm width made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Economy ---- Item including cost and...

•

Providing and fixing Overhead rain showers of minimum dimension 225x225mm & wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - cl...

•

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. ---- Item including cost and conveyance of of all ma...

•

Providing and fixing Pillar Cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Economy ---- Item including cost and conveyance of of all...

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, incl...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting Each deposited layer by ramming after watering with a lea...

•

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light ...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...

•

RCC Perforated rings-900 mmx1100 mm ---- Item including cost and conveyance of of all materials, lead and lift charges loading and unloading charges labour charges all incidental charges hire charges ...

•

supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-cha...

•

supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per...

•

supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engi...

•

supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 41O plain slotted (having slot of size 1.613.2 mm) mild steel threaded and socketed/ p...

•

Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 55...

•

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

•

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

•

Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...

•

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

•

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

•

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

•

Labour charges for laying and jointing GI pipes with earth work including fixing collars, elbows, tees, bends, gland cocks and other fittings with cuts and threads, white lead paints wherever necessar...

•

Yield testing of borewells at final depth with a minimum of 10 hours continuously with the help of pump testing unit including the cost of transportation charges, crew charges and cost of consumables....

•

Providing and fixing brass full way valve gate with C.I. wheel of

•

approved quality (screwed end) : 65 mm nominal bore ---- Item including cost and conveyance of of all materials, lead and l...

•

Providing and fixing gun metal non- return valve of approved quality

•

(screwed end) : 50 mm nominal bore - Horizontal ---- Item including cost and conveyance of of all materials, lead and lif...

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

•

Compacting Original Ground - Compacting original ground supporting embankment - Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of emba...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 150...

•

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of...

•

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground o...

•

Providing and fixing Wall Mixer Telephonic with L Shaped tubular bend set for overhead shower made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - clas...

•

Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

•

For Ramp Concrete Percentage on finished rate of concrete per m3 Charges at 50percent ---- Item including cost and conveyance of of all materials, lead and lift charges loading and unloading charges l...

•

Centring for Septic tank concrete Percentageon finished rate of concrete per m3 Charges at 10 percent Vol-1 page 112 ---- Item including cost and conveyance of of all materials, lead and lift charges ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

building, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. The granite/trap/basaltcrushed graded coarse aggregates and fine aggregates a...

•

Supplying, fixing and wiring earth leakage relay with core balanced current transformer ---- Item including cost and conveyance of of all materials, lead and lift charges loading and unloading charges...

•

Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirmining to table 3 class 5 of ...

•

Supply,fixing and single phase preventer using necessary wires over an existing panel board sutable for motor up to 20HP capacities ---- Item including cost and conveyance of of all materials, lead an...

•

Supply,fixing and wiring heavy duty low voltage capacitors conforming to IS 2834,3 phase,400/440 volts grade,for power factor improvement of roating machinaries like induction motor ---- Item includin...

•

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts,bolts and washers 32 Amps ---- Item including cost and conveyance of of all materials, lead and ...

•

Supplying and fixing polished wood board made of not less than 15mm thick plank on both sides with planks made out of not more than 2 pieces and fixing the same to the wall using tapered inverted wood...

•

Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc and fixing using inverted wood plugs in case of RCC ceiling a...

•

Supplying heavy gauge PVC conduit pipe . mm dia. mm thick confirming to IS 2509 with suitable size bends, metal/ PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The co...

•

Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement ...

•

Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/ conduit entry as required with one coat of primer of approved make etc.

•

Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/ conduit entry as required with one coat of primer of approved make etc.200 x 90 x 65 mm

•

Supplying and fixing PVC/metal conduit Deep junction box

•

19/20 mm deep Junction box

•

---- Item including cost and conveyance of of all materials, lead and lift charges loading and unloading charges la...

•

Supplying and fixing PVC/metal conduit Deep junction box

•

25 mm deep Junction box

•

---- Item including cost and conveyance of of all materials, lead and lift charges loading and unloading charges labou...

•

Supplying PVC flexible conduit pipe . mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF s...

•

Supplying And Fixing Metal Fan Box with Round Hook.

•

---- Item including cost and conveyance of of all materials, lead and lift charges loading and unloading charges labour charges all incidental char...

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Make : Anchor / Indo Asian / Lisha / Cona)

•

6A One Way Switch

•

---- Item inc...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Make : Anchor / Indo Asian / Lisha / Cona)6A Two Way Switch

•

---- Item inc...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Make : Anchor / Indo Asian / Lisha / Cona)

•

6A Three Way socket

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Make : Anchor / Indo Asian / Lisha / Cona)Stepped Fan Regulator Two Module

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Make : Anchor / Indo Asian / Lisha / Cona)

•

---- Item includi...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Make : Anchor / Indo Asian / Lisha / Cona)

•

6/16A Universal Socket

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Make : Anchor / Indo Asian / Lisha / Cona)

•

TV/Telephone Socket

•

Supplying and fixing/replacing of 6/16/32A electrical accessories on existing switch board.

•

6A Three Way 5 Pin Socket

•

---- Item including cost and conveyance of of all materials, lead and lift charge...

•

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws.

•

---- Item including cost and conveyance of ...

•

Supplying 4 mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws.

•

---- Item including cost and conveyance of of all materials, lea...

•

Supplying 4 mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws.

•

---- Item including cost and conveyance of of all materials, lead ...

•

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. (Make : Usha / Almonard / Bajaj / Khaitan / crompton)

•

12" Sweep (300 mm)

•

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.

•

---- Item including cost ...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...

•

Supplying wall mounting fan suitable to operate at single- phase 230v AC. supply.

•

---- Item including cost and conveyance of of all materials, lead and lift charges loading and unloading...

•

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary ...

•

Extra length of GI pipe of class B 19mm dia for down rod.

•

---- Item including cost and conveyance of of all materials, lead and lift charges loading and unloading charges labour charges all incidenta...

•

Supplying.litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside and anticorrosive paint outside and 20 SWG M.S....

•

Supplying, installation, testing and commissioning of solar hot water heater comprising of solar Flat Plate Collector (FPC) of size 2120x1040x100mm and stainless steel hot water storage tank with stai...

•

Supplying of .feet -PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning hours & 70 lumen maintenance with CRI 80. Power Input: 220-240V 50/60Hz Power factor 0...

•

Supplying of recess mounting non integral type . LED w luminaire comprising of pressure decast extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, C...

•

Supply of round/square recess/surface mounted rolling type LED Down light with . W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swive...

•

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...

•

Supplying & fixing of retrofit type - LED bulb . W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70. efficacy 80 lumen per W, life25000 burning hours and Compliance t...

•

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

•

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...

•

Supplying and Fixing of.mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wall us...

•

Fixing halogen/metal halide /SVL/ IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires.

•

---- Item including cost and conv...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/ OFF, energy cross-3 with Short circuit breaking cap...

•

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 p...

•

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/ 450V upto 300mA sensitivity on existing wood/ panel board.

•

16A -25A 2 pole

•

---- Item including cost and conveyance of of all ...

•

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/ 450V upto 300mA sensitivity on existing wood/ panel board.

•

---- Item including cost and conveyance of of all mate...

•

Supply erection, testing, commissioning of Cassette type split Air conditioners suitable for operation on single/three phase AC supply, hermetically sealed compressor with air cooled condenser motor c...

•

Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C.

•

Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas...

•

Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load protection, spike suppression, operati...

•

Extra for Fabrication supply and fixing of Stand fabricated using slotted angle /L angle of size 6mm x 50mm for mounting out door/indoor A.C. unit/ Batteries.

•

---- Item including cost and conveyance ...

•

Providing Power Supply

•

Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution) (Make : ABB / HPL / Havells / Schinder)

•

---- Item including cost ...

•

Fixing of . A TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling.

•

100A to 250A TPST

•

---- Item includ...

•

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

•

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...

•

Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter

•

---- Item including cost and conveyance of of all materials, lead and lift charges loading and unloading charges labour charges all in...

•

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter.

•

---- Item including cost and conveyance of of all materials,...

•

Supplying, fixing and wiring 1000/5A to 1600/5A 15VA Burden class 1 Current Transformer

•

---- Item including cost and conveyance of of all materials, lead and lift charges loading and unloading charge...

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

•

---- Item including cost and conveyance of of all materials, lead and lift...

•

Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/ FRP/ DMC insulator which ar...

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat. with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat. with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.

•

Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped wi...

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit. The pit should...

•

Supplying of Guy Wire & GI Wire as per BESCOM Specification. (Page-435-436)

•

8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM

•

---- Item including cost and conveyance of of all materials, lead and lift c...

•

Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-...

•

Labour charges for Laying of XLPE UG Cable Using Conventional Laying with Excavation of Soil (Page : 365)

•

a) Cable trench excavation, 1000x 0.6x1=600, Ordinary soil (Extracted from Vol-1, PWD SR Sl No...

•

Labour charges for Laying of XLPE UG Cable Using Conventional Laying with Excavation of Soil (Page : 365)

•

"c) Refilling and consolidation

•

(Extracted from Vol-1, PWD SR Sl No. 1.10)"

•

---- Item includi...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/ Aluminum Rollers as directed by the departmental staff

•

---- Item including cost and conveyance of of al...

•

Supplying of Heavy Duty Copper Terminal Long Barrel (Lug) as per BESCOM specification (Page : 456)

•

50 Sqmm Copper Terminal, Apprx Wt: 26 Gm

•

---- Item including cost and conveyance of of all materials...

•

Supplying of Brass Cable Gland as per BESCOM specification (BESCOM SR Page:458)

•

---- Item including cost and conveyance of of all materials, lead and lift charges loading and unloading charges...

•

Supplying, installing, testing and commissioning of Diesel Generator set with following specifications.Power rating as per standard reference condition as per-BS 5514ISO 3046 ISO 8528 IS 1002IS...

•

Supply, Erection, testing and commissioning of AMF panel suitable for .kVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, alumi...

•

Supply, Installation, Testing & Commissioning of ACCL- Automatic Changeover and Current Limiter is DIN-Rail mounted in Polycarbonate housing. When the main supply fails and stand by Generator supply i...

•

Labour charges for Laying of XLPE UG Cable Using Conventional Laying with Excavation of Soil (Page : 365)

•

a) Cable trench excavation, 1000x0.6 x1=600, Ordinary soil (Extracted from Vol-1, PWD SR Sl No...

•

Labour charges for Laying of XLPE UG Cable Using Conventional Laying with Excavation of Soil (Page : 365)

•

"c) Refilling and consolidation

•

(Extracted from Vol-1, PWD SR Sl No. 1.10)"

•

---- Item includi...

•

Labour charges for Laying of XLPE UG Cable Using Conventional Laying with Excavation of Soil (Page : 365)

•

h) supplying and Laying of RCC Hume pipe (Material : 307(CDS-21) + Labour :69 (CDS-19))

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/ Aluminum Rollers as directed by the departmental staff

•

---- Item including cost and conveyance of of al...

•

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

•

GI/Copper strips for grounding connections, using necessary fixing materials as required.

•

25 x 3 mm Copper strip

•

---- Item including cost and conveyance of of all materials, lead and lift charges loa...

•

Supplying of Guy Wire & GI Wire as per BESCOM Specification. (Page-435-436)

•

8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM

•

---- Item including cost and conveyance of of all materials, lead and lift c...

•

Supplying of Brass Cable Gland as per BESCOM specification (BESCOM SR Page:364)

•

---- Item including cost and conveyance of of all materials, lead and lift charges loading and unloading charges...

•

Supplying of Heavy Duty Copper Terminal Long Barrel (Lug) as per BESCOM specification (BESCOM SR Page : 362)

•

50 Sqmm Copper Terminal, Apprx Wt: 26 Gm

•

---- Item including cost and conveyance of of all...

•

Providing,And Casting of architectural Cornice along perimeter of the building at third floor roof level of Building As per Drawing issued by The Chief Architect With Width (600mm+230)/2 and Depth 625...

•

Providing,and Casting of architectural feature surrounding the window As per Drawing issued by The Chief Architect With Width 600mm and Depth -315mm The rate is inclusive of Cost and Conveyance of all...

•

Providing,and Casting architectural feature surrounding the center ridge at terrace floor of Building As per Drawing issued by The Chief Architect With top Portion length 15.62mtr and Bottom portion l...

•

Providing,and Casting architectural Cornice at surrounding the around the structural glazing As per Drawing issued by The Chief Architect With length 7.56m Width 300 mm and Depth -315mm The rate is in...

•

Supply of Red Earth(Ratio 6:3:1 Hort.SR)(6 parts Red Earth )

•

---- Item including cost and conveyance of of all materials, lead and lift charges loading and unloading charges labour charges all...

•

Supply of FYM(Ratio 6:3:1)( Hort.SR)(3 parts of FYM)

•

---- Item including cost and conveyance of of all materials, lead and lift charges loading and unloading charges labour charges all inciden...

•

Supply of sand(Ratio 6:3:1)(P-2,Part I:Item no.3(iii)c, 2020-21Hort.SR)(1 part of Sand)

•

---- Item including cost and conveyance of of all materials, lead and lift charges loading and unloading...

•

Barmooda, American barmooda, phosphalum, kentuky blue & saitophorum lawn establishment:Digging of lawn area for removal of top soil upto 0.15mts and removal of weeds with roots and shifting them to 50...

•

Tree planting in ordinary soil:Digging pit of 0.75m * 0.75m * 0.75m size. Back filling 50% by the topsoil and remaining 50% is filled using the 0.035 cmt of Sand, 0.070 cmt of FYM and 0.105 cmt of Red...

•

Tree planting in ordinary soil:Digging pit of 0.75m * 0.75m * 0.75m size. Back filling 50 by the topsoil and remaining 50% is filled using the 0.035 cmt of Sand, 0.070 cmt of FYM and 0.105 cmt of Reds...

•

Planting of Shrubs in Ordinary soil:Digging pit of 0.45 m*0.45 m*0.45m size.Back filling 50% by the topsoil and remaining 50% is filled using the 0.007 cmt of Sand. 0.014 cmt of FYM and 0.021 cmt of R...

•

Hedge planting in ordinary soil:Digging canal of 1*0.30m*0.45m size. Back filling 50% by the topsoil and remaining 50% is filled using 0.0112 cmt of Sand. 0.0224 cmt of FYM and 0.0336 cmt of Redsoil i...

•

PVC pipe unplasticised 32mm ---- Item including cost and conveyance of of all materials, lead and lift charges loading and unloading charges labour charges all incidental charges hire charges of all m...

•

Pop-up sprinkler"PGP"10M/5000 series ‘Hunter’Adj/Rain bird including cost of all materials,hire charges of equipments,machinery,with all leads and lift,labour,loading and unloading including cost ...

•

Supply of Neem cake Three months once( Two times)(AR)

•

---- Item including cost and conveyance of of all materials, lead and lift charges loading and unloading charges labour charges all inciden...

•

Supply of Honge Indi Three months once( Two times)(AR)

•

---- Item including cost and conveyance of of all materials, lead and lift charges loading and unloading charges labour charges all incide...

•

Supply of Vermicompost Three months once( Two times)(AR)

•

---- Item including cost and conveyance of of all materials, lead and lift charges loading and unloading charges labour charges all inci...

•

Maintenance:Maintenance of garden includes watering, weeding, moving, cutting,cleaning of fallen leaves & other wastages and keep the lawn and path area clean and tidy etc. and as directed by the Offi...

•

Erection charges for fixing a . litres capacity wall mounting electric geysers using bolts, flat at one end nut and washers at the other end for through bolts and nuts and washers with 150x450x600mm b...

•

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

•

PVC pipe - OD 110mm and 6 Kg/sqcm m 255 ---- Item including cost and conveyance of of all materials, lead and lift charges loading and unloading charges labour charges all incidental charges hire char...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

16892 KW-4 BOOK.doc

Tender Document • 1.02 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Retender

Works

Buildings

CONSTRUCTION OF SAMUDAYABHAVANA AT SRI SIDDARAMESHWARA MATA GODEKERE IN CHIKKANAYAKANAHALLI TALUK TUMKUR DISTRICT (STAGE 2)

Public Works Department

PWD Division Office Tumkuru | Karnataka

Amount: Refer DocsCloses: 29 Dec 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published20 Dec 2024
Closed29 Dec 2024
Retendered20 Dec 2024