RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Revolving Chair ( 32 pieces ) Technical Specifications 1/15 * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) MATERIAL Pedestal Base Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos
Requiredof 50 mm Size Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos
Requiredof 50 mm Size Arm Material aluminium covered with pu aluminium covered with pu seat material PU Foam covered with Fabric PU Foam covered with Fabric Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) NA * Material of Fabric Back Cover Material for Backrest Innner frame Upholstered with Mesh fabric and mounted on main assembly Innner frame Upholstered with Mesh fabric and mounted on main assembly Material of Fabric of Seat Cover 100% polyester fabric 100% polyester fabric GSM/Thickness of fabric ±5%(Gram/Square meter) 250 gram * GENERAL Chair Type Advance Bio Synchronic Advance Bio Synchronic Tilt Tension Adjustment Yes * Height Adjustment ± 5(mm) up to 100 mm up to 100 mm Arm With With Type of backrest support Backrest With Adjustable Lumber Support Backrest With Adjustable Lumber Support Arm Type Adjustable Adjustable Colour of Fabric for Seat and Backrest As per Buyer's choice * Ergonomic Seat Design Yes Yes Back type push back push back Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame * backrest has No No 2/15 separate adjustable headrest Seat type sliding sliding Seat is curved Yes * Locking mechanism Yes * Type of locking 5-Position Locking * Number of arm movement 4(up & down end left & right) 4(up & down end left & right) Lumber support integrated integrated DIMENSION Overall Chair Height ±15mm 1080 1080 Backrest Height ±15mm 600 600.0 Backrest Width ±10mm 440 440.0 Seat Height ±15 mm 450 450 Seat Width ±10 mm 500 500 Seat Depth ±10 mm 500 500.0 Thickness of MS Plate Joining the under structure with Seat 2 2.0 Thickness of Plywood used in Seat ±1(mm) N.A N.A Thickness of Plywood used in Backrest ± 1(mm) N.A N.A Padestal Size (Diameter in mm) +/- 10 mm 650 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 50 mm 50 mm Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) N.A N.A WARANTEE Warrantee period in number of years 1-year 1-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES BIFMA Certification YES YES 3/15 OEM of offered product is ISO 9001:2015 certified YES YES OEM of offered product is ISO 14001:2015 certified YES YES OEM of offered product is ISO 18001:2007 certified YES YES Green guard certification YES YES Aiota - YES * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Additional Specification Documents
