Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.4 LAccepted-AOC NEAR RAILWAY STATION UTARLAI BARMER RAJASTHAN PIN 344001 | BARMER | RAJASTHAN | 344001 | ₹34.4 L | L1 | Accepted-AOC L1 |
| 2 | L2₹36.3 L+₹1.9 L (5.58%)Rejected-Finance FLAT NO 1004 BUILDING NO L 11 KEDAR HOUSING SOCIETY 10TH FLOOR SECTOR NO 21 TALOJA PHASE 2 PANVEL RAIGAD NAVI MUMBAI 410208 | NAVI MUMBAI | RAIGAD | MAHARASHTRA | 410208 | ₹36.3 L+₹1.9 L (5.58%) | L2 | Rejected-Finance Other than L1 |
| 3 | L3₹39.2 L+₹4.8 L (13.9%)Rejected-Finance | ₹39.2 L+₹4.8 L (13.9%) | L3 | Rejected-Finance Other than L1 |
| 4 | L4₹41.9 L+₹7.5 L (21.8%)Rejected-Finance PLOT NO 1134 1196 MORIVALI VILLAGE TAL AMBARNATH DIST THANE AMBERNATH 421505 | AMBERNATH | THANE | MAHARASHTRA | 421505 | ₹41.9 L+₹7.5 L (21.8%) | L4 | Rejected-Finance Other than L1 |
| Sl No | Description | Qty | Unit | M/S. RISING ENTERPRISE L3 | M/s ASPIRE ENGINEERING ENTERPRISES L2 | shakti engineering and electrical works L4 | M/S TANUSHREE CONSTRUCTION COMPANY L1 |
|---|---|---|---|---|---|---|---|
| 1.00 | Material and labour for servicing of flame proof EOT Crane capacity 2/3/5 ton by the following method as follows : (a) Replacement of gear oil in gear boxes . (b) Grease the whole crane (c) Before filling the gear boxes clean the gear box inside and outside by using diesel (d) Checking the wheel condition (e) If thruster breaks are used check the level of oil in it and if required to be refilled, refill the same (f) Check the working of the break if required to change then change the same (g) Checking the connection of motors (h) Checking the condition of motor if required to rewind, then rewind the same (j) Checking the condition of couplings if required to be change then change the same (k) Check the nuts & bolts fitted on the crane, if required to be change then change the same (l) Check the condition of the power cables fitted on the crane, if required to be change then change the same. (m) Check the break shoe fitted on the break of the crane, if required then change the same (n) Check the limit switch fitted on the crane , if required then replace the same . (o) Check the step down transformer, single phase preventer, terminal block, MCB, HRC and DBR, if required to be change then change the same. (p) If VED installed, check the same and if required then replace the same (q) Check the pendant, if element and push button required to be change then replace the same . Note : (for item No 01 to 03) (i) All unserviceable spare parts to be replaced shall be measured and paid separately under relevant item of Sch A.
(ii) Cost of Grease shall be deemed included in unit quoted rate.
Note: (iii) Maintenance and servicing of EOT crane to be carried out twice throughout the CA duration. Qty are considered accordingly. (iv) Load testing of flame proof EOT Crane comprising two number tests for each crane i.e. Capacity test and Brake Test by putting the requisite load, writing date of test and next due date for testing on the crane with white synthetic enamel paint over a black strip of synthetic enamel paint complete all as directed.
(v) Material and labour for Load testing shall be arranged by the contractor at his own and the rate of this item include the cost thereof.
(vi) Testing of particular crane shall be scheduled by Engineer-in-Charge.
(vii) Load testing and caliberation of EOT crane carried out in the presence user rep & Engineer-in-Charge. | 78 | Each Job | 10,000 ₹7,80,000 Lowest | 12,500 ₹9,75,000 | 16,000 ₹12,48,000 | 10,000 ₹7,80,000 Lowest |
| 2.00 | Description all as per item No 1 above but capacity of crane 10 ton complete all as directed | 8 | Each Job | 12,000 ₹96,000 Lowest | 15,000 ₹1,20,000 | 18,000 ₹1,44,000 | 14,000 ₹1,12,000 |
| 3.00 | Description all as per item No 1 above but capacity of crane 20 ton complete all as directed | 4 | Each Job | 20,000 ₹80,000 | 30,000 ₹1,20,000 | 25,000 ₹1,00,000 | 19,000 ₹76,000 Lowest |
| 4.00 | Supply & fix in repair FRLS, 4 core 6 sqmm PVC insulated PVC sheathed multistranded copper conductor cable on the existing conduit/carrier all as specified and directed by Engr-in-charge. | 50 | RM | 600 ₹30,000 | 380 ₹19,000 Lowest | 460 ₹23,000 | 500 ₹25,000 |
| 5.00 | Supply & fix in repair FRLS, 4 core 4 sqmm PVC insulated PVC sheathed multistranded copper conductor cable all as specified and directed by Engr-in-charge. | 50 | RM | 800 ₹40,000 | 480 ₹24,000 | 800 ₹40,000 | 465 ₹23,250 Lowest |
| 6.00 | Supply & fix in repair FRLS, 6 core 2.5 sqmm PVC insulated PVC sheathed multistranded copper conductor cable all as specified and directed by Engr-in-charge. | 50 | RM | 900 ₹45,000 | 510 ₹25,500 | 900 ₹45,000 | 440 ₹22,000 Lowest |
| 7.00 | Supply & fix in repair/replacement FRLS, 12 core 1.5 sqmm PVC insulated PVC sheathed multistranded copper conductor cable | 75 | RM | 600 ₹45,000 | 491 ₹36,825 | 650 ₹48,750 | 385 ₹28,875 Lowest |
| 8.00 | Material and labour for disconnecting electric connections of 3 phase motor 0.5/0.75/1 HP capcity, 415 Volts AC supply of EOT crane, taking out from the crane, dismantling / opening of motor, cutting and taking out burnt winding wire, cleaning of slots by removing dust etc. and rewinding with super enamelled copper winding wire of existing gauge and class of insulations as per original manufacturers design including varnishing replacing insulation papers insulated sleeves etc. complete reassembling and reinstalling and testing on full load complete all as specified and directed. | 6 | Each job | 4,000 ₹24,000 | 3,000 ₹18,000 Lowest | 5,400 ₹32,400 | 4,000 ₹24,000 |
| 9.00 | Description all as per item No 8 here-in-before but Motor capacity of 1.5/2 HP complete all as directed | 6 | Each job | 4,000 ₹24,000 Lowest | 4,500 ₹27,000 | 6,000 ₹36,000 | 6,000 ₹36,000 |
| 10.00 | Description all as per item No 8 here-in-before but Motor capacity of 3 HP complete all as directed | 4 | Each job | 7,000 ₹28,000 | 5,000 ₹20,000 Lowest | 7,000 ₹28,000 | 8,000 ₹32,000 |
Tender Value
₹37.8 L
EMD Value
₹75,560
Closing Date
1 Jan 2026, 6:00 pmClosed
GE Army Jaisalmer
GE Army Jaisalmer - 345001
REPAIR AND MAINTENANCE OF EOT CRANE AT VARIOUS CAPACITYLOCATIONS AT JAISALMER MIL STN UNDER GE (A) JAISALMER
2025_MES_743846_1
8543/25-26/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Jaisalmer
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE Army Jaisalmer
₹75,560
Yes
12 Aug 2026
11 Dec 2025
3 Jan 2026
11 Dec 2025
1 Jan 2026
25 Dec 2025
Material and labour for servicing of flame proof EOT Crane capacity 2/3/5 ton by the following method as follows : (a) Replacement of gear oil in gear boxes . (b) Grease the whole crane (c) Before filling the gear boxes clean the gear box inside and outside by using diesel (d) Checking the wheel condition (e) If thruster breaks are used check the level of oil in it and if required to be refilled, refill the same (f) Check the working of the break if required to change then change the same (g) Checking the connection of motors (h) Checking the condition of motor if required to rewind, then rewind the same (j) Checking the condition of couplings if required to be change then change the same (k) Check the nuts & bolts fitted on the crane, if required to be change then change the same (l) Check the condition of the power cables fitted on the crane, if required to be change then change the same. (m) Check the break shoe fitted on the break of the crane, if required then change the same (n) Check the limit switch fitted on the crane , if required then replace the same . (o) Check the step down transformer, single phase preventer, terminal block, MCB, HRC and DBR, if required to be change then change the same. (p) If VED installed, check the same and if required then replace the same (q) Check the pendant, if element and push button required to be change then replace the same . Note : (for item No 01 to 03) (i) All unserviceable spare parts to be replaced shall be measured and paid separately under relevant item of Sch A. (ii) Cost of Grease shall be deemed included in unit quoted rate. Note: (iii) Maintenance and servicing of EOT crane to be carried out twice throughout the CA duration. Qty are considered accordingly. (iv) Load testing of flame proof EOT Crane comprising two number tests for each crane i.e. Capacity test and Brake Test by putting the requisite load, writing date of test and next due date for testing on the crane with white synthetic enamel paint over a black strip of synthetic enamel paint complete all as directed. (v) Material and labour for Load testing shall be arranged by the contractor at his own and the rate of this item include the cost thereof. (vi) Testing of particular crane shall be scheduled by Engineer-in-Charge. (vii) Load testing and caliberation of EOT crane carried out in the presence user rep & Engineer-in-Charge.
Description all as per item No 1 above but capacity of crane 10 ton complete all as directed
Description all as per item No 1 above but capacity of crane 20 ton complete all as directed
Supply & fix in repair FRLS, 4 core 6 sqmm PVC insulated PVC sheathed multistranded copper conductor cable on the existing conduit/carrier all as specified and directed by Engr-in-charge.
Supply & fix in repair FRLS, 4 core 4 sqmm PVC insulated PVC sheathed multistranded copper conductor cable all as specified and directed by Engr-in-charge.
Supply & fix in repair FRLS, 6 core 2.5 sqmm PVC insulated PVC sheathed multistranded copper conductor cable all as specified and directed by Engr-in-charge.
Supply & fix in repair/replacement FRLS, 12 core 1.5 sqmm PVC insulated PVC sheathed multistranded copper conductor cable
Material and labour for disconnecting electric connections of 3 phase motor 0.5/0.75/1 HP capcity, 415 Volts AC supply of EOT crane, taking out from the crane, dismantling / opening of motor, cutting and taking out burnt winding wire, cleaning of slots by removing dust etc. and rewinding with super enamelled copper winding wire of existing gauge and class of insulations as per original manufacturers design including varnishing replacing insulation papers insulated sleeves etc. complete reassembling and reinstalling and testing on full load complete all as specified and directed.
Description all as per item No 8 here-in-before but Motor capacity of 1.5/2 HP complete all as directed
Description all as per item No 8 here-in-before but Motor capacity of 3 HP complete all as directed
Description all as per item No 8 here-in-before but Motor capacity of 5/7.5 HP complete all as directed
Description all as per item No 8 here-in-before but Motor capacity of 10 HP complete all as directed
Description all as per item No 8 here-in-before but Motor capacity of 20 HP complete all as directed
Supply & fix in repair/replacement limit switch for LT/CT motion suitable for 2 Ton/ 3 Ton/5 Ton/ capacity EOT crane complete all as specified and directed.
Supply & fix in repair/replacement limit switch for LT/CT motion suitable for 10 Ton capacity EOT crane complete all as specified and directed.
Supply & fix in repair/replacement limit switch for LT/CT motion suitable for 20 Ton capacity EOT crane complete all as specified and directed.
Supply & fix in repair/replacement hoist limit switch suitable for 5/10/20 Ton capacity EOT crane complete all as specified and directed.
Supply& fix in repair/replacement break liner pad of LT,CT and Main Hoist motion suitable for 2 to 20 Ton capacity EOT crane all as directed Engineer-in-charge.
filling of Gear oil ( ISI Marked ) of 80W-90 grade in gear boxes upto specified level under the relevent item of the schedule complete all as specified and directed.
Hydraulic oil (ISI Marked ) of approved grade for filling in the electrohydraulic thruster upto specified level complete all as specified and directed..
Supply & fix in repair/replacement Transformer of capacity 250 VA having primary side 0-415 volt and secondary side 0-110 V AC complete all as specified and directed.
Supply & fix in repair/replacement Transformer of capacity 1500 VA having primary side 0-415 volt and secondary side 0-230 V AC complete all as specified and directed.
Supply & fix in repair/replacement , HRC fuse, round type, upto 16 Amps complete all as specified & directed by Engineer-in-charge.
Supply & fix in repair/replacement MNX 18 Amps, power contactor suitable for 3 phase, 415 volts, 50 Hz AC. complete all as specified and directed by Engineer-in-charge.
Supply & fix in repair/replacement MNX 25 Amps, power contactor suitable for 3 phase, 415 volts, 50 Hz AC. complete all as specified and directed by Engineer-in-charge.
Supply & fix in repair/replacement, Power contactor MNX 32A Coil Volt-240V complete all as specified and directed by Engineer-in-charge.
Supply & fix in repair/replacement, push botton switch with (element and all connection) 220 Volts, suitable for 2/3/5/10/20 ton crane capacity all as specified and directed by Engineer-in-charge
Supply and fix in replacement of Push button station with 6/8 Way switches including emergency stop and mains ON with suitable size of gland for cable entry/exit, hanging arrangements complete all as specified and directed by Engineer-in-charge.
Supply and fix in replacement of Flame proof push button station with 12 Way switches including emergency stop and mains ON with suitable size of gland for cable entry/exit, hanging arrangements complete all as specified and directed by Engineer-in-charge.
Supply and fix in repair/replacement of roller bearing suitable for 2 Ton crane complete all as specified and directed by Engineer-in-charge,
Supply and fix in repair/replacement of roller bearing suitable for 3 Ton crane complete all as specified and directed by Engineer-in-charge
Supply and fix in repair/replacement of roller bearing suitable for 5 Ton crane complete all as specified and directed by Engineer-in-charge, Cranex
Supply and fix in repair/replacement of roller bearing suitable for 10 Ton crane complete all as specified and directed by Engineer-in-charge.
Supply and fix in repair/replacement of roller bearing suitable for 20 Ton crane complete all as specified and directed by Engineer-in-charge.
Supply and fix in repair/replacement of thrust bearing suitable for 2 Ton crane complete all as specified and directed by Engineer-in-charge,
Supply and fix in repair/replacement of thrust bearing suitable for 3 Ton crane complete all as specified and directed by Engineer-in-charge.
Supply and fix in repair/replacement of thrust bearing suitable for 5 Ton crane complete all as specified and directed by Engineer-in-charge.
Supply and fix in repair/replacement of thrust bearing suitable for 10 Ton crane complete all as specified and directed by Engineer-in-charge.
Supply and fix in repair/replacement of thrust bearing suitable for 20 ton crane complete all as specified and directed by Engineer-in-charge.
Supply and fix in repair/replacement of wheel bearing suitable for 2 ton crane complete all as specified and directed by Engineer-in-charge.
Supply and fix in repair/replacement of wheel bearing suitable for 3 ton crane complete all as specified and directed by Engineer-in-charge.
Supply and fix in repair/replacement of wheel bearing suitable for 5 ton crane complete all as specified and directed by Engineer-in-charge.
Supply and fix in repair/replacement of wheel bearing suitable for 10 ton crane complete all as specified and directed by Engineer-in-charge.
Supply and fix in repair/replacement of wheel bearing suitable for 20 ton crane complete all as specified and directed by Engineer-in-charge.
Supply and fix in repair/replacement of gear box bearing suiable for 2/3 ton crane complete all as specified and directed by Engineer-in-charge.
Supply and fix in repair/replacement of gear box bearing suitable for 5 ton crane complete all as specified and directed by Engineer-in-charge
Supply and fix in repair/replacement of gear box bearing suitable for 10 ton crane complete all as specified and directed by Engineer-in-charge.
Supply and fix in repair/replacement of gear box bearing suitable for 20 ton crane complete all as specified and directed by Engineer-in-charge.
Supply and fix in repair/replacement of steel wire rope suitable for EOT crane of capacity 2/3/5/10/20 ton with all connected fitments and including greasing and testing all as specified and directed by Engr-in-charge.
Supply and fix in repair/replacement of EOT crane wheel suitable for 2 to 20 ton crane complete all as specified and directed by Engineer-in-charge
Supply and fix in repair/replacement of cable carrier trolley for 2/3/5/10/20 ton crane complete all as specified and directed by Engineer-in-charge
Supply and fix in repair/replacement of crane hoist brake suitable for 2 to 20 ton crane complete all as specified and directed by Engineer-in-charge
Supply and fix in repair/replacement of hydraulicThruster Motor suitable for 2/3 ton crane complete all as specified and directed by Engineer-in-charge
Supply and fix in repair/replacement of hydraulic Thruster Motor suitable for 5/10 ton crane complete all as specified and directed by Engineer-in-charge
Supply and fix in repair/replacement of hydraulic Thruster Motor suitable for 20 ton crane complete all as specified and directed by Engineer-in-charge
Supply and fix in repair/replacement of rubber buffer suitable for 2/3/5/10/20 ton crane complete all as specified and directed by Engineer-in-charge
Supply and fix in repair/replacement of Gear wheel suitable for 2/3 ton crane complete all as specified and directed by Engineer-in-charge
Supply and fix in repair/replacement of Gear wheel suitable for 5 ton crane complete all as specified and directed by Engineer-in-charge
Supply and fix in repair/replacement of Gear wheel suitable for 10 ton crane complete all as specified and directed by Engineer-in-charge
Supply and fix in repair/replacement of Gear wheel suitable for 20 ton crane complete all as specified and directed by Engineer-in-charge
Supply and fix in repair/replacement of Oil seal suitable for 2/3/5/10/20 ton crane complete all as specified and directed by Engineer-in-charge
Supply and fix in repair/replacement of gasket suitable for 2/3/5/10/20 ton complete all as specified and directed by Engineer-in-charge
Supply and fix in repair/replacement of Variable frequency drive suitable for 2/3 ton crane complete all as specified and directed by Engineer-in-charge
Supply and fix in repair/replacement of Variable frequency drive suitable for 5 ton crane complete all as specified and directed by Engineer-in-charge
Supply and fix in repair/replacement of Variable frequency drive suitable for 10 ton crane complete all as specified and directed by Engineer-in-charge
Supply and fix in repair/replacement of Variable frequency drive suitable for 20 ton crane complete all as specified and directed by Engineer-in-charge
Supply & fix in repair/replacement MCB 6-32 Amps ,SP, suitable for 240 V, 10 KA,'C', 50 Hz, AC.all as directed by Engineer-in-charge
Supply & fix in repair/replacement MCB SPN 40 to 63 Amps, suitable for 240 V, 10 KA,'C', 50 Hz, AC.all as directed by Engineer-in-charge.
Supply & fix in repair/replacement MCB SPN 32 Amps, suitable for 240 V, 10 KA,'C', 50 Hz, AC.all as directed by Engineer-in-charge.
Supply & fix in repair/replacement MCB TPN/FP 16 to 32 Amps, suitable for 415 V, 10 KA,'C', 50 Hz, AC all as directed by Engineer-in-charge
Supply & fix in repair/replacement, MCB TPN 40 to 100 Amp 415 V,10 KA,'C', 50 Hz, AC complete all as specified and directed by Engineer-in-charge.
S&F in repair, MCCB TPN 25 to 100 Amps 16 KA complete all as specified and directed by Engineer-in-charge.
S&F in repair, MCCB TPN 125 Amps 36 KA complete all as specified and directed by Engineer-in-charge.
Supplying & laying jointing and testing LT XLPE insulated galvanized steel wire armorued electric cable 1100 volt grade heavy duty ISI marked with aluminium conductor of cross sectional area 10 Sqmm 4 Core with the wall/ beam/ pipe/passing through pipes or laid under floor/ducts of through walls etc complete all as specified and directed by Engineer-in-charge.
Supplying & laying jointing and testing LT XLPE insulated galvanized steel wire armoured electric cable 1100 volt grade heavy duty ISI marked with aluminium conductor of cross sectional area 16 Sqmm 4 Core with the wall/ beam/ pipe/passing through pipes or laid under floor/ducts of through walls etc complete all as specified and directed by Engineer-in-charge.
Supplying & laying jointing and testing LT XLPE insulated galvanized steel wire armoured electric cable 1100 volt grade heavy duty ISI marked with aluminium conductor of cross sectional area 25 Sqmm 4 Core with the wall/ beam/ pipe/passing through pipes or laid under floor/ducts of through walls etc complete all as specified and directed by Engineer-in-charge.
S&F in repair, indicator lamp LED type complete all as specified and directed by Engineer-in-charge.
Repair to Gear box of 2/3 Ton (LT /CT/Hoist ) by replacement of any acessories like shaft,oil seal, pinion or any other connected items refixing and checking testing complete all as specified and directed by Engineer-in-charge.
Repair to Gear box of 5 Ton (LT /CT/Hoist ) by replacement of any acessories like shaft,oil seal, pinion or any other connected items refixing and checking testing complete all as specified and directed by Engineer-in-charge.
Repair to Gear box of 10 Ton (LT /CT/Hoist ) by replacement of any acessories like shaft,oil seal, pinion or any other connected items refixing and checking testing complete all as specified and directed by Engineer-in-charge.
Repair to Gear box of 20 Ton (LT /CT/Hoist ) by replacement of any acessories like shaft,oil seal, pinion or any other connected items refixing and checking testing complete all as specified and directed by Engineer-in-charge.
Material and labour for cleaning and preparation of steel surfaces of existing dull painting of flame proof EOT crane indoor/ outdoor type with complete assemblies etc. and applying two coats of synthetic enamel paint (Heat/fire resistant type) according to IS colour code by spray machine including writing MES/SM No in capital letters of suitable size on body for capacity 2/3 ton complete all as specified and directed . Note :- (i) Cost of paint shall be deemed included in unit quoted rate. (ii) Flame proof EOT crane are fixed at different locations and at a height approx 20 feet. Painting thereof shall be carried out after getting the permission of authorities. Tenderer shall keep this aspect while quoting the rates.
Description all as per item No 82 above but capacity of 5/10 ton complete all as directed
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 5.04 MB
BOQ_833175.xls
BOQ • 3.23 MB
Tender8543.pdf
Tender Documents • 0.80 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .