REPAIR/MAINTENANCE OF PA(OR) AMC CENTRE AND COLLEGE UNDER GE (EAST) LUCKNOW

Amount

Taking down cement plaster on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc but lime plaster any description complete all as specified and directed

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, mixed with water proofing compound (ISI marked) @ 3% by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete, all as specified & directed. Note : - Supply only water proofing compound shall be measured and paid for separately.

M&L for rendering 15mm thick in cement mortar 1:6 on surfaces other than fair face of brick work of walls, finished even & smooth without using extra cement complete all as specified.

M&L for rendering 5 mm thick in CM 1:3 on fair faces of concrete surface of ceiling and finishing the surface even and smooth without using extra cement, complete, all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over one coat of primer, complete, all as specified & directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer over a coat of min 1mm thick putty complete, all as specified and directed.

M&L for Preparation of new or previously undercoated surface of wall and applying three coats of white wash in ceiling, complete, all as specified and directed.

Dismantling of old ceiling boards/wall panelling any type and any thickness including cover fillets/ aluminum snap grid complete all as specified and directed.

M&L false ceiling with 4 mm thick E-board white prelaminated set embossed reinforced designer ceiling board of approved texure fixed with GI imposed grid frame work of size not more than 600 x 600 mm having 24 mm wide T- section, runner made of 0.33 mm GI sheet and angle made of 0.45 mm GI sheet, suspended with 2 mm dia GI wire including two coat of oil bound distemper complete all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick Panel with wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified

S&F in repair mild steel, drapery rods, coloured, standrad quality, PVC coated not less than 25mm dia with heads/finial at both ends, clamps etc. all as specified and direced.

S&F in repair 250 mm long Aluminum alloy, anodised sliding door bolts, plate type, ,and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminum alloy complete all as specified and directed.

S&F in repair 200 mm long Aluminum anodised barrel tower bolts of extruded section complete

S&F in repair 150mm long alluminium handles, cast type, anodized and fixed complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads (exc 1.5 sqm) complete all as specified and directed.

S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complet all as specified and directed

S&F 3 mm thick Sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete all as specified and directed

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixing with stainless steel wire staples including taking down MS frame and refixing MS frame with new wire mesh with tinned tack/by welding in steel window and ventilators and making good the disturbed portion during execution of work, complete, all as specified and directed.

S&F cooler stand framed/fabricated of ms angle or other mild steel section complete including welding and fixing to brick walls with cement concerete type B1 1:2:4 (20 mm graded aggregates) complete upto three storey height of building complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete

M&L for preparation of newly steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer on surfaces of any description over 10 cm width or girth, not oterwise described, complete all as specified and directed.

S&F in repairs 100 mm size Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

S&F 15mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls/ ceilings/ concealed or laid in floors including taking up or down existing steel tubing and connections all as specified and directed

S&F 20 mm Tubes medium grade galvanised with all fitting and fixed complete to walls/ ceiling / concealed or laid in floors including taking up or down existing steel tubing and connections complete all as specified and directed.

Cutting chases, pinning in brick walls for concealed water tubing making good to facings where required and pointing in CM 1:3 cutting not exceeding 10 cm girth complete, all as specified and directed.

S&F in repair 20 mm dia float valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe with fly nuts complete all as specified and directed.

S&F in repairs PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls ( 110 mm Bore)

S & F in repair PVC (SWR) bends any radius (110mm Bore)

S & F, in repair PVC connections 15 mm size with PTMT nuts of length 450 mm all as specified and directed.

S&F in repair 15mm dia CP stop valve/angle cock chromium plated with curtch or butterfly handle screwed down, screwed for iron pipe of brass ferrule and fixed in repair complete.

S & F in repair 15 mm PTMT float valve, high pressure with Polythene floot and flynut complete, screwed for Iron pipe etc all as specified.

Cleaning and removing all scale and dirt, etc from water tanks and from mouths of circulating pipes by following method, etc. capacity of water tank exc. 250 ltrs but n exc 500 ltrs

Cleaning and removing all scale and dirt etc from tank and mouth of circulating pipe and refixing of capacity exc 500 n exc 1000 ltrs complete, all as specified and directed.

Supply only integral water proofing compound .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete, all as specified and directed.

M&L for non skid coloured ceramic edge cut digital tiles 7 to 8 mm thick (square/ rectanglar) area of each tiles exc 0.11 sqm but not exc 0.18 sqm as in floor over and including screed bed 15mm thick in CM 1:6 for laying floor finishes etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete, all as specified and directed.

M&L for coloured glazed ceramic edge cut digital tiles 600x300 x 7 mm thick on vertical surfaces such as skirting/dado over and including 10mm thick rendering in CM 1:3 complete all as specified and directed.

M&L for digital vitrified ceramic tiles 10mm thick (square/ rectangular), joint free, polished, coloured (dark shade as approved), area of each tile not exc 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:4 complete all as specified and directed.

All as per description of serial item No 39 above but on vertical surface over & including 10mm thick screed bed in cement & sand mortar 1:3 complete all as specified

S & F in repair galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Taking down and refixing in same opening of aluminum door shutter of area exc 1.00 sqm but n exc 2.00 sqm including necessary repair with replacement of rubber beading, and other small articles such as cleats, hinges, screws etc complete all as specified and directed

Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but not exc 4 sqm each, complete, all as specified & directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each, complete, all as specified & directed.

Taking down shutters of any description exc 1.0 sqm but not exc 2.0 sqm each all as specified and directed.

S&F for factory made Solid PVC Door Frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S & F of factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; pannelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed together with solvent cement complete all as specified and directed.

S&F 32mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete, all as specified and directed.

S&F 300 mm long, Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F 200mm long aluminium anodised barrel tower bolts of extruded section, complete, all as specified and directed.

S&F 150 mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete, all as specified and directed.

S&F butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete, all as specified and directed.

M&L for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete, all as specified & directed.

S&F 50 micron powder coated aluminium anodised frame/chowkat of Aluminium door /ventilator section of 100x44x1.60to1.8 mm thick fixed with rawal plug and screw or wire expansion hold fasteners complete, all as specified and directed.

S&F anodized 50 micron powder coated aluminium door shutters,, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (3 Nos), suitable handle (2 No.), hydraulic door closer etc complete all as specified & directed.

S&F 50 micron powder coated anodized aluminium sliding window with section of size 88x44.45x1.5mm with one or more rebate (consisting 03 no shutter with track) consisting of 5mm thick reflective glass and staimless steel wiremesh incl fixing aluminiumm shutter having top and bottom rail size 112mmx37mmx1.5mm incl jointing cleats, glazing rubber packing aluminium beading channel screw complete all as sepcified and directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F in repairs Aluminum (Die cast body) hydraulic door closer regulated designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified

S&F 50 micron powder coated for aluminium anodized gril size 6mm dia of aluminium bar mesh size75mmx75mm and fixed to aluminium window ventilator complete, all as specified and directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of capacity 10 litre ISI marked complete all as specified and directed.

S&F in repair Long body Bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle sc-rewed down screwed for iron pipe or for brass ferrule and fixed (15mm bore dia of pipe ) complete all as specified and as directed.

S&F in repair vitreous China wash hand basin white size 550 x 400mm including brackets complete all as specified and directed.

S&F in repair peg set of 6 brass fancy type 600 mm long, all as specified & directed.

S & F in repair 15 mm bore dia of pipe pillar taps fancy type cast copper alloy with capstan heads chromium plated screwed down hidh pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed

S&F in repair Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed ( 32mm) complete

S&F in repairs Vitreous China Urinal, Half stall type, white incl coupling, waste pipe and spreader etc complete all specified.

S&F in repair Vitreous china urinal partition white of size 310x700 mm complete all as specified and as directed.

S & F in repair 32 mm bore Low density PVC flexible pipe for Wash hand basin/sink etc complete all as specified and directed.

S & F 32 mm bore Low density polyethylene pipes for urinal etc complete all as specified and directed.

M & L for preparation of old decorated plastered or un-plastered surface of walls, cornices, pilasters etc by brooming down scraping, filling all the nail holes etc and prepairing surface with plaster of paris etc and applying one coat of white wash on walls mixed with adequate qty of fevicol complete all as specified and directed.

Description all as per Item No 72 above but on ceiling complete

M & L for preparation of old decorated surface of walls, cornices, pilasters etc by washing rubbing down and stopping old distempered and painted surfaces and applying one coat of oil bound distemper on walls, cornice, pilasters etc complete all as specified and directed.

All as per description of serial item No 74 above but applying two coats coat of oil bound distemper (OBD) on wall surfaces.

M&L for applying two coats of oil bound distemper over a coat of primer over Birla white wall putty after complete removal of existing treatment on old plastered surface including necessary preparation complete all as specified and directed

M&L for complete removal of exisiting finish (with mechanical sander machine) on walls and applying plaster of paris putty of min 1 mm thickness to prepare the surface even and smooth and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as speciifed. Note:- Paint to be applied with airless spray machine .

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Description all as per item No 78 here-in before but on steel surfaces and ---- ditto ----

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete for taking credit and making good the disturbed surfaces to match with the existing complete all as specified and directed.

Material and labour for one light / fan point controlled by one, one way switch 06 Amp wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed.

All as per serial item No 02 here-in-before but one 3 pin, 06 Amp socket outlet point on independent board controlled by one, one way switch 06 Amp.

All as per serial item No 02 here-in-before but one 3 pin, 06 Amp socket outlet point on same board controlled by one, one way switch 06 Amp.

All as per Serial Item No 02 here-in-before but point wiring with 2.5 Sq mm single core FRLS cables and earth continuity wire of 1.5 Sq mm single core FRLS cable for one 3 pin 16 Amp socket out let point controlled by one, one way switch on independent board complete all as specified and directed.

Supply and fix switch piano flush type, 06 Amp, single pole, one way, 230 Volt complete all as specified & directed.

Supply and fix socket outlet 2 in 1, 5 pin, 06 Amp, flush type, 230 volt complete all as specified & directed.

Supply and fix switch socket combination outlet 2 in 1, 3 pin, 06 Amp and 16 Amp flush type, universal, 230 volt, four hole complete all as specified & directed.

Supply and fix electronic ceiling fan regulator with rotary step, two module, humfree, AC, 240 volt, 100 Watt and duly ISI marked complete all as specified & directed.

Supply and fix lamp holder, PVC / Polycarbonate type with back plate suitable for batten fitting complete all as specified & directed.

Supply and fix in replacement LED tube light fittings 1200 mm, 22 W higher energy saving decorative ultra slim square profile LED lighting fixture with extruded aluminium housing without powder coating enviromental friendly, energy efficient complete all as specified and directed.

Supply and fix in replacement LED tube light fittings 600 mm,10/12W higher energy saving decorative ultra slim square profile LED lighting fixture with extruded aluminium housing enviromental friendly, energy efficient complete all as specified and directed.

Supply and fix in replacement ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size complete all as specified & directed.

Material and labour in replacement sub main wiring with 06 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

Material and labour in replacement sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

Supply and fix in replacement of sheet metal enclosure distribution board triple pole and neutral (VTPN),double door, AC, 440 volt, 04 way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed and comprising of the following:- (a) MCCB, 125 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. (b) MCB, SP, AC, 240 volt of 06 to 32 Amp, "C" curve, 10 KA breaking capacity - 12 Nos.

Supply and fix in replacement of sheet metal enclosure distribution board, double door, single pole and neutral, AC, 240 volt, 12 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

Supply and fix in replacement of MCB, SP, AC, 240 volt of 06 to 40 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

Supply and fix in replacement of MCB, DP, AC, 240 volt of 32 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

Supply and fixing in replacement for 1.5 sqmm single core copper,multistandard PVC insulated (FRLS) unsheathed, cable 1100 volts grade complete all as specified and directed

Supply and fixing in replacement for 2.5 sqmm single core copper,multistandard PVC insulated (FRLS) unsheathed, cable 1100 volts grade complete all as specified and directed

Supply and fix in replacement of recessed mounted 2’x2’ LED ceiling light fitting 36 watt, 6500K with IP 20 protection comprises of CRCA housing, high efficiency diffuser cover, electronic driver, etc and all accessories pre-wired including connecting up complete all as specified and directed

Repair and maint supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE. Five star rates with brushless direct current motor (BLDC) all as specified and directed by Engr-in-Charge.

Repair and maint supply and fixing wall fan of 400 mm sweep, 220-240 volts, AC, 50Hz 1330 RPM, 55 Watts power input, air delivery 65 cum/min with all accessories complete all as directed by Engineer-in-Charge.

Repair and maint supply and fix exhaust fans single phase 230/240 Volts heavy duty metalicbody of size 300mm sweep 1400 RPM ISI marked, and making connection with twisted copper flexible wire 23/0.076 mm all as specified and directed.

S&F in replacement of PLL LED 17/18 Watts suitable for 2x2 recessed type fittings with replacement of 36 Watts PLL lamp all as specified and directed.

S&F LED bulb 9/10 W B22 CDL all as specified and directed by Engr-in-Charge.

Taking down ceiling fan/Exhaust fan any size any size make, sealing cable ends, dismantling blades in case of ceiling fan and removing fan and blades to E/M store yard for repair & handing /fixing of the same after repair and connecting up all as specified and directed.

M&L for replacement of ball bearing of size 6201/6202/6203 as required all as specified & directed.

S&F in replacement of Capacitor 2.5 Mfd in ceiling fan of any size, exhaust fan of size 300/230mm size and cabin fan of 400mm sweep, all as specified and directed.

Rewinding of Ceiling/Exhaust/Cabin fans and pedestal fans comprising of followings: (a) Rewinding of stator with supper enamelled copper wire (gauge of wire shall be same as provided by the manufacturer) including varnishing the new winding wire with quick dry varnish properly. (b) Replacement of defective worn out bush where required, (ball bearing, capacitor will be measured and paid separately). (c) Oiling/greasing and reassembling the fans with new split pin, check nut, locking bolt, washer, holder clip and connector including providing new twisted twin core flexible copper cable of size 23/0.0076 of 1 Mtr length. (d) Testing of repaired fan shall be carried out in the yard of AGE E/M (East) to the entire satisfaction of the Engr-in-Charge. (i) Ceiling fan of 1200 mm Seep. (ii) Exhaust fan 380 mm (15”) Sweep. (iii) Wall Mounted fan 400mm Sweep.

M/s Aman Construction Company

ANIL CONSTRUCTION

M/S PERFECT CONSTRUCTION CO.

M/S Reliance Construction