SPECIAL REPAIR OF ROAD FROM KLP MAIN GATE TO HELIPAD AT OLD CANTT UNDER GE (EAST) PRAYAGRAJ.

Amount

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with paving bituminous primer VG-30 grade @ 5 Kg per Ten Sqm on black top road surface and applying 30mm thick (consolidated thickness) bituminous premixed semi dense asphaltic concrete with 5.5% paving bitumen binder content VG-30 Grade by weight of total mix, rolled and compacted to required camber and gradient to a uniform smooth surface with 8 to 10 tonne power roller complete all as specified and directed. NOTE: (i) Bituminous premix asphaltic semi dense concrete work shall be executed as per design mix as approved by GE. (ii) The binder content specified is minimum. Any variation in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to Government. (iii) Premixing shall be done by using Hot Mix plant and laying shall be done by using mechanical paver. complete all as specified and directed.

M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre line, stop line, dashes, arrows etc and like n.exc 10cm wide on road pavements with hot applied thermo plastic road marking paint of approved colour conforming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

S&F in repairs Cat eye solar reflective type of metal body alloy of size 100mmx100mmx20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufacturers instruction complete all as specified and directed.

S&F solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mmx125mmx25mm (stank 65mm) A high efficiency mono crystalline solar panel 2.4V/0.3 Watt on NI-ed rechargeable battery (1.2V/1600MA) consisting to super bright LED with 10,000 to 18,000 med completed as per manufacturers instructions etc all as specified and directed.

Demolition of concrete of any description and in any position not specifically provided for including paver blocks complete all as specified and directed.

M&L for surface excavation n.exc 30cm deep and averaging 27cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L for hard core of broken stone boulder of gauge n.exc 63mm, deposited, spread and levelled in laysers n.exc 15cm thick, watered rammed true a surface complete all as specified and directed.

M&Lfor 100mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for 80mm thick M-40 grade factory made rubber moulded factory made vibratory compected cement concrete interlocking paver block pre-polished in approved design and colour conforming to IS 15658-2006 with grey cement and pigment as approved complete all as specified and directed.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed wtih cement mortar 1:3 (1 cement 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in bed block, coping path etc including form work complete all as specified and directed.

M/S A P CONSTRUCTION

Crown Engineering Corporation

Shivagya Engineering

Channa Brothers and Co.

VIMAL KUMAR CONTRACTOR