Term Contract for repairs to Hard Standing, Brick, paving ,Round abouts, Traffic islands, Park and like in Ward No.1, 2, 3 and 5, Delhi Cantonment.

Amount

Reinforced Cement Concrete Bench : Supplying and fixing reinforced cement concrete chair benches with back rest without arms and having two logo of Delhi Cantonment Board as also letter 'DCB' engraved suitably on the benches at locations on concrete benches as specified/ directed by Engineer-in-Charge with indicated colour scheme, with total 6 planks, 3 planks for seating & 3 planks on backrest. The detailed specification shall be as follows: Material Concrete mix design: M-30 Grade Concrete mix in accordance with IS:10269/latest in gray cement by using vibro – compaction technique and with reinforcement. Reinforcement steel : TMT reinforcement bars conforming to IS:1786/latest of dia 10 mm used as main reinforcement bar and 4 mm dia mild steel bars used as stirrups as per drawing and specification given in technical bid (Specification) on page No.60 to 61. Stirrups details: 10 nos – 4 mm dia bar @ 150 mm C/C Main reinforcement bar: 4 nos – 10 mm dia bar Adequate clean concrete cover: 15mm minimum Material for connecting seating plank with leg: 12 mm dia x 65 mm long galvanized steel counter sunk bolts confirming to IS: 1367 / latest with EVA washer Material for connecting back rest plank with leg: Half threaded carriage bolts and nuts of size 165 mm length x 8mm dia with EVA and steel washers RCC planks: Using M-30 grade gray cement mixed with 3% red pigment Dimension Seat / plank length ± 3 mm: 1500 mm (all red coloured) Seat height ± 3 mm: 450 mm Seat width ± 3 mm: 440 mm Total bench height (including backrest ± 3mm: 1000 mm Size of wider plank ± 3 mm: 1500 mm x 200 mm x 50 mm Size of smaller plank ± 3 mm: 1500 mm x 100 mm x 50 mm Plank hole dia ± 3 mm: 14 mm Connecting holes from each end ± 3 mm: 200 mm Leg width ± 3 mm: 140 mm Distance between both legs ± 3 mm: 340 mm Paint & Finish Plank painting: Acrylic based paint conforming to IS: 15489 / latest of colour as per buyer’s choice Bench finishing: As per approved sample Finish of exposed surface: Uniformly smooth texture with no bug holes and smooth mold seams Hole finish: Hole visible at the back side of bench sealed with cement mortar APPROVED MAKES : KK, Kreative Concrete Company

Providing and fixing 60mm thick interlocking paver blocks of approved shape / pattern as directed by the Engineer-in-Charge, 60 mm thick, made out of C&D waste at C&D waste recycling plant established by East Delhi Municipal Corporation or other similar agency as approved by the Engineer-in-Charge. Interlocking paver blocks shall be purchased by the contractor as applicable rates fixed gy such units. Interlocking paver blocks be fixed and provided at site at indicated locations in a pattern approved / directed by Engineer-in-Charge, laid over a base of 30 mm (average) thick Jamuna sand and joints filled with fine sand and finally compaction of bedding sand and blocks laid over it, with vibratory plate compactors, till the top of each paving block is in level with its adjacent blocks complete as per directions of Engineer-in-Charge. APPROVED MAKES : Nimco precast Pvt. Ltd., K.K, TeraFerma, Kreative Concrete Company, UP Concrete products. Contractor to submit procurement vouchers along with the bill.

M/L Brick work with Machine Moulded Modular Bricks of class designation 100 in brick work including making horizontal and vertical grooves 10 mm wide and 12 m deep complete in cement mortar 1 : 4 (1 Cement : 4 Coarse sand) above ground surface all as directed by Engineer-in-charge

Supplying of SFRC Manhole covers & frames conforming to IS – 12592 (Part I) using M-35 concrete having clear opening of 560 mm dia as per details below:

(a) Heavy Duty: . Over all Total Size in height mm mm Frame Details 875 155 Cover Details 720 80 APPROVED MAKES : Nimco precast Pvt. Ltd., K.K, TeraFerma, Kreative Concrete Company, UP Concrete products. Contractor to submit procurement vouchers along with the bill.

(b) Medium Duty: . Over all Total Size in height mm mm Frame Detials 770 110 Cover Details 670 60 APPROVED MAKES : Nimco precast Pvt. Ltd., K.K, TeraFerma, Kreative Concrete Company, UP Concrete products. Contractor to submit procurement vouchers along with the bill.

Supplying & Fixing SFRC gratings confirming to IS 12592 (Part I) 70 mm thick square or rectangular in shape as directed by Engineer-in-charge using M-35 concrete of any size and shape, square or rectangular. APPROVED MAKES : Nimco precast Pvt. Ltd., K.K, TeraFerma, Kreative Concrete Company, UP Concrete products. Contractor to submit procurement vouchers along with the bill.

Supplying & fixing SFRC gratings confirming to IS 12592 (Part I) 100 mm thick square or rectangular in shape as directed by Engineer-in-charge using M-35 concrete concrete of any size and shape, square or rectangular. APPROVED MAKES : Nimco precast Pvt. Ltd., K.K, TeraFerma, Kreative Concrete Company, UP Concrete products. Contractor to submit procurement vouchers along with the bill.

Supplying & laying Instant patch pothole premixwith fine/ standard grading (Ready Mix of first quality) for filling of potholes, utility cuts, over lays, edge repairs & small carpeting jobs filled in pots & campacted as directed.

Bidder Name

Amount

AMIT ASSOCIATES(GSTN-07ACUPG0847K1Z7)

M/s. Kansal Construction Co.(GSTN-07AAQFK7850A1Z8)

choudhary contractors and suppliers(GSTN-07AAHFC2819A1ZY)

PUJA CONSTRUCTION COMPANY(GSTN-07AARFP6755C1ZW)

PUJA CONSTRUCTION COMPANY

choudhary contractors and suppliers

AMIT ASSOCIATES

M/s. Kansal Construction Co.

choudhary contractors and suppliers

PUJA CONSTRUCTION COMPANY