Construction of Multi Purpose Center at W.No.13 Anna Nagar in Kangeyam Municipality

Amount

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water wherever necessary refilling the sides of foundation with excavated soil other than sand in layers of 15cm thick well rammed and cleaning and levelling the site etc.,complete - Narrow Foundations - First Depth - Upto 2m

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed wherever necessary refilling the sides of foundation with excavated soil other than sand in layers of 15cm thick well rammed and cleaning and levelling the site etc.,complete - Open Earth work Excavation

Cement concrete 1:4:8 mix (One cement four Crushed Stone Sand and eight aggregate) using 40 mm ISS metal including mixing, laying, consolidating curring cost and conveyance of all materials to site and all labour charges etc., complete as per standard speicification

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation - Plinth Beam

Supplying and erecting, centering for sides and soffits including supports and strutting upto 3.29m height for plane surfaces as detailed below in all floors with all cross bracings using mild steel sheet of 90cm x60cm BG 10 gauge stiffened with welded M.S. angle of 25 x 25 x 3mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10 cm to 13 cm dia spaced at not less than 75 cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specification. (The payment for centering shall be made only after the concrete is laid. The retrieved materials should be taken back by the contractor)Plane surface such as RCC square or rectangular columns, top and bottom slab of sunshade, boxing sill slabs etc.,

Supplying and fabrication placing in position of M.S. (or) RTS rods for required size and length as directed by the deparmental officers approved design including bending cutting tying and cost of binding wire cost and conveyance of all materials to site etc., complete as per standard specification

Providing and laying in Position, Standardised concrete mix M-20 Grade in accordance with IS :456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement concrete of 325 Kg/M3 and maximum water content ratio of 0.55, including admixture (Plasticiser / Super Plasticiser) in recommended Proportions as per IS :9103 to accelerate. retard setting of concrete, improve workability without preparing strength and durability with about (5 cu.m) 7730 Kg of 20mm machine crushed stone jelly and with about (3.30 cu.m) 5156 Kg of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 Kg of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also laying, vibrating with mechanical vibrators, finishing curing etc., and providing fixtures like fan clamps in the RCC floor/roof slabs wherever necessary without claming etc., complete complying with standard specifications and as directed by the departmental officers. The coarse and fine aggregates to be used should be comply with the requiremnts of IS standard.

Floor finishing with 20 mm thick Elish pattern 1st short in cement concrete 1:3 mix (No crushed stone sand to be added) using 6 to 10 mm size chips including cost and conveyance of mixing laying finishing curing cost and conveyance of all materials to site and all labour charges etc., complete

Brick work in cement mortar 1:5 mix using (One cement and five crushed stone sand) using best quality of Fly ash bricks of size (230 x 110 x 75 cm) for foundation including curing cost and conveyance of all materials to site and all labour charges etc., complete as eper standard specification

Supplying and fixing of M.S. sheet window using 18 gauge M.S. sheet with M.S. angle of size 40 x 40 x 6 mm and M.S. flat 25 mm x 6 mm and M.S. square bars including cutting, welding, fixing in position cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Supply and fixing of trusses using necessary 'L' angels and I section each according to design approved by the departmetal officers including cutting, welding cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws, plastic washer. The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated, cutting the sheet in to the required size and making ornamental designs as per the site condition and as directed by the departmental officers.

Supplying and fixing of rolling shutter with ISI specification which shall be of pull and push type made out of 18 G x 3" loth section which consist of five main parts such as curtain lock plate guide channel rollers and hood covers these five main parts are made out of speicial components detailed below. curtain shall be of 18 G x 3 " loth section curtain of the required size and filled with heavy cast iron M.S. chips for 8' (2.44m) with rolling shutters loth section provided shall be not less than 37 nos lock plate shall be 10 gauge M.S. sheet reinforced with 40 mm x 40 mm x 6 mm M.S. angles @ the bottom and fitted with heavy latches and locking arrangements oneither side these should be one handle on either side. pressed guide channel shall be of 10 gauge M.S. sheet and attached to the side brackets shall be of 10 gauge M.S. plate with 20 mm square bars and cast iron 'U' clambs shall be riveted to the side brackets. Roller shall be heavy cast iron pulley fitted with heacy duty "U" G class 40 mm steel pipe and high tensile fassils high carbon coil spring 2 Nos. shall be fitted food cover shall be of 0.90 mm M.S. sheet reinforced with 25 mm x 25 mm x 3 mm M.S. angle guide channel the rolling shutters in addition to the above shall have pulling hook and shall be coated with heavy coat of red oxide primer

Wiring with 2 x 4sqmm (56 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 x 100 x 113 mm TW switch box with 3mm hylum sheet cover for 15A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire for Open PVC power plug point.SD 41

Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good for PVC Open light point / Fan point (For Electronic regulator) etc, complete as per standard specifications. SD 22

Supply and fixing of single box type 4'40W fluorescent fitting complete with copper choke and condensor with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals to the fitting with tube (SD - 89)

Supply and fixing of fancy glass shade and 15W LED including cost and conveyance of all materials to site all labour charges for fixing inposition and all other incidental charges therefore etc complete.

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade on 7/20 GI bearer wire for service connection mains (SD 64)

Supply and run of 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains(SD 69)

Supply and fixing of TNEB Board suitable for 3 Phases 63A service connection made up of suitable angle iron frame work of size 2 feet x 1 1/2 feet using angle iron of size 1 1/2" x 1 1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos 63A fuse units(500V) 1 No. Neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 7/16 PVC insulated copper wire with earth connection complete.SD 129

Supply and fixing of 32A DP switch of 500V with metal clad with fuse and neutral (side handle) on suitable TW board with PWD earthing (SD - 143)

Supply and fixing of 32 Amps fuse unit including all cost and Conveyance of materials and labour charges etc complete as per std specification

Plastering with cement mortar 1:5 mix (One cement and five Crushed Stone Sand ) to 12 mm thick including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Painting two coats with approved quality of (soncem) cement paint over the plastered surface including curing cost and conveyance of all materials to site and all labour charged etc., complete as per standard specification

Painting two coats with best approved quality of enamel paint over one coat of priming for new iron work including all labour charges etc., complete as per standard specification

KMR AND CO (BID ID -1267164)