ADDITION ALTERATION SPECIAL REPAIRS TO SETTLED BROKEN MARBLE FLOOR FROM EARTHFILLNG ONWARDS REPAIRS TO CRACKS ON WALLS BY METAL LATHING AND CERTAIN WORKS AT AHILS P169 BUILDING AT ADE AND ENHANCEMENT OF OVER HEAD WATER TANK OF CAPACITY TO 750 LITRE

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), rmoving servicable tiles to store and rubbish off the premises complete

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) and removal of debries to a distance not exceeding 100 Metre complete all as specified and as directed.

Excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil complete all as directed

M&L Sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed

M&L Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed

All as per item No 5 here-in-before, but except material complete

M & L for 75mm thick plain cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in sub base to floor complete all as specified and as directed

M & L 100 mm thick in two layers 50 mm each sandwitching with hardrawn steel as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete (Note : Hardrawn steel will be measured in appropriate item)

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed

M&L Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

M&L screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:4 complete all as specified and as directed

M&L screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:4 complete all as specified and as directed

M&L rendering 10mm thick on surfaces other than fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and as directed

M & L Baroda green marble work 18/20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed

All as per item No 14 here-in-before, but except marble stone slab complete all as specified and as directed

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed

All as per item No 16 here-in-before, but except Granite slab complete

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete

M&L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed

M & L Brick work with sub-class `B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as directed

M&L preparing surface, new of steel and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed

Taking down cement or cement lime plaster of any description from walls, including racking out joints hacking for key scrubbing down with water etc , complete all as specified.

M&L 15 mm thick external plaster in CM 1:4 on fair faces of walls , finishing the surfaces even and smooth without using extra cement complete all as specified and as directed

M&L 15 mm thick external plaster in CM 1:6 on surfaces other than fair faces of walls , finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M & L Pressed steel frames 105x 60 mm frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., supplied and fixed complete all as specified and as directed

M&L Flush shutters 40 mm thick , solid core construction, with particle board core and plywood face panels, commercial type on both sides decorative face veneer complete all as specified and as directed

S & F Butt hinges,100mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified and as directed

S & F Aluminium handles, cast type of size 100mm complete.

S&F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed

S & F Aluminium anodised barrel tower bolts 150 mm length of extruded section complete all as specified and as directed

M & L for preparation of plastered or unplastered of un decorated surface of walls, chajja, balcony, facia etc by brooming down or steel wire brushing, scrapping down smoke soots, moulds, moss, efflorescent salts, treading oil and greasy spots, and applying two coat of interior dust proof plastic emulsion paint over and including a coat of priming paint over 2 mm wall care putty including sand papering to obtain smooth finish complete all as specified and directed. Make : Royal in Asian or its equivalent in berger/Johnson/Nicholson.

All as per item No 33 here-in-before, but on old surfaces after and including complete removal of existing treatment of any type and condition complete all as directed by EIC

M&L for preparing new plastered surfaces of wall and including two coat of exterior plastic emulsion paint over a coat of primer complete all as specified and directed

Material and labour for preparation of old wall surfaces by complete removal of existing treatment, preparing wall surfaces and applying one coat of exterior plastic emulsion paint like Apex in asian paint or its equivalent complete all as specified and directed

Material and labour for preparation of old wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Cutting out concrete blocks, slabs, brickwork or stone, masonry (in alternate course set in CM 1:4), forming toothings for and bonding new work in mortar into old work, including new materials entering old wall with 1:2:4 type B1 (using 20 mm graded stone aggregate) complete all as specified and as directed

M & L Gl wire netting 0.90mm dia and 12mm mesh lathing in patches to wood or metal studding, joists, etc. in walls. Ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and as directed

Takingdown shutters of any description exc 1 sqm and n exc 2 sqm each and refixing in the same opening after cutting/adjusting/easing and made good complete

Taking down chowkhats or frame n.exceeding 1.5 Sq. m each with shutter(s) (without taking off shutters from the frame), including removing to store, complete all as specified.

S&F anodised aluminium frame and shutter powder coated for doors and windows, ventilators, partition with one or more rebates including joining cleat,rubber beading for fixing, star lock etc complete.

S&F sheet glass, 4.00 mm thick, ordinary quality and glazing with rubber beadings suitable for aluminium frame work, in square n.exc. 0.5 sqm in each pane complete all as specified and as directed.

S&F pinhead sheet glass, 4.8 mm thick, ordinary quality and glazing with rubber beadings suitable for aluminium frame work, in square exc. 0.5 sqm in each pane complete all as specified and as directed.

S&F fixing black/golden colour solar control film 25 micron reflective type sticked to glass panes as per instruction of manufacturer including taking down existing damaged films complete all as specified and as directed.

S&F in repairs Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed

S&F 9 mm th Prelaminatd particle board, interior grade, prelaminated both sides with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed

S&F 10 mm thick toughened glass as in partition of work station, shaped and moulded complete all as specified and directed

All as per item No 48 here-in-before, but except glass complete including skilled expert t ensure the shutter in situ and made if functional as it is complete all as specified and directed

M&L Vitrified ceramic tiles of size 10 mm thick light shade, area of each tile exceeding 0.36 sqm and not exceeding 0.42 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed

M&L Vitrified ceramic tiles of size 10 mm thick light shade, area of each tile exceeding 0.36 sqm and not exceeding 0.42 sqm, in skirting. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed in cement mortar 1:4 complete all as specified and directed

Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc.

Taking down or up steel tubing and connections and removing to store yard of size 20 mm bore.

Steel water tubing medium grade 20 mm bore galvanized with all fittings and fixed to walls and ceiling or laid in floors including cutting chases where required complete all as specified. Make: Tata/ Jindal/Ravindra

M&L 300mm bore reinforced cement concrete pipes, class NP2, laid and jointed with collars complete all as specified and as directed

Dismantling of brick work or stone/boulders/pcc block masonry, build in CM including all quoins, arches, pillars etc, but excluding ashlars facing, dressed stone work and precast concrete articles.

Taking down AC, PVC AIR, vent, soil andn rain water pipes of dia 150mm fixed to wall or in trenches etc

S&F UPVC (Sch-40) pipes 150mm bore fixed as in vertical stacks including joints/fittings fixed to walls, Note:- Making proper leak proof joint with valley gutters to the newly fixing pipe with funnel type made up galvalume sheet material as same as valley gutter the same will be complete all as specified and as directed

S&F 150mm PVC (SWR) bends any radius complete

Dismantling water tanks Exc 250 & n exc 500 and removing to store all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks of capacity 750 in Litres (cylin-drical vertical with closed top) hoisted and fixed in position complete all as specified and as directed

S&F Nipple of suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm-45gms /25mm-65gms) of 20mm bore including necessary washer,check nuts complete all as specified.

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe20mm and fixed complete all as specified and as directed

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe20mm and fixed complete all as specified and as directed

Taking up or down steel tubing and connections connections of 20mm bore, including cleaning for re-fixing or removal to store

S&F Tubes, ‘medium grade’ galvanised of 20mm bore , with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and directed

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe of 20 mm bore and fixed. .(Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm - 690 gms)

M&L Cutting out cracks to V-section in existing roofs or terracing,cleaning out and filling solidly with hot mixture of bitumen and clean dry snd 1:1(by weight)

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and removal of dubbaries out of MOD land all as specified and directed .

M&L Cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) average 50mm or more thickness as in floor to support of tank etc all as specified and directed by Engr-in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out in hard/dense soil

M & L PCC 1:3:6, type C2 (using 40 mm graded stone aggregate) as in surface channels and drains complete all as specified and as directed

M & L 1:2:4, type B1 (using 20 mm graded crushed stone aggregate) as in pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete set in CM 1:6 complete all as specified and as directed

Ditto in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, coping, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed

M & L PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) as in surface channels and drains complete all as specified and as directed

M & L RCC 1:2:4, type B1 (using 20 mm graded stone aggregate) as in precast cement concrete in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 complete all as specified and as directed

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

M&L framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

M&L Stairs (framed) including stringers, treads, landing, balusters, hand rails etc, including cleats, brackets, etc. complete all as specified and as directed

S& F 150 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

GS TRADERS

R R Constructions

AishwaryaConstructions

Prashanth Associates

RAHUL ENTERPRISES

Vishwas Enterprises

N BHASKAR REDDY