REPAIR AND RESURFACING OF ROAD IN 11 MECH, 17 MECH, TCP-1, 26 AMN SC, 496 SUPPLY DEPOT UNDER GE (A) JAISALMER

Amount

M&L for Bituminous premixed asphaltic semi-dense concrete 30mm thick (consolidated thickness) with 5.5% binder (Paving bituminous VG-30 Graded) content by weight of total mix including prepration of existing black top/ unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning and cleaning surface with gunny bags to remove all loose dirt etc and applying evenly a priming tack coat of bitumen VG-10 grade @ 2.5 Kg/10 Sqm by mechanical sprayer rolled with 8 to 10 tonne power roller and compacted to required camber and gradient complete all as specified and directed by Engr-in-charge. Note :- Repair of road to be carried out in Patches.

All as per item No. 1.00 here-in-before but priming with tack coat of 5kg/10 sqm and ditto.

M&L for Premix bituminous macadam of paving bitumen of VG-30 grade with 4% binder content by weight of total mix, any penetration laid /rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) complete rolling to uniform smooth surface with 8 to 10 ton power road roller complete all as specified and directed by Engineer-in-Charge.

M&L for Scarifying or picking gravelled, macadam or bituminous macadam and finishing surfaces of concrete roads, pavements by brooming in area exc 400 Sqmm all (n exc 50 mm deep) and applying evenly a priming tack coat of bitumen VG-10 grade 2.5 Kg/ 10 Sqm by mechanical sprayer complete including complete all as specified and directed by Engineer-in-Charge.

S&F in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc complete all as specified and directed by Engineer-in-Charge. Note :- Cat Eye to be solar type as approved by GE.

S&F in repairs cat eye solar two side reflective type of metal aluminium stud body alloy of size 100mm x 100mm x 20mm with PMMA strip lens reflector of Model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions fixed with epoxy complete all as specified and directed by Engineer-in-Charge.

S&F in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed by Engineer-in-Charge. Note :- Dealineator to be of solar type as approved by GE.

S & F in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 800 mm height duly powder coated, consisting of super bright 6 LEDs in flash mode and solar panel-mono crystalline/ polycrystalline -4volts /300mA, battery-2x1.2V 1600mAH Ni-MH/Ni-cD rechargable with 4 hours of charging time and 12 hours of working time at night with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1, complete all as specified and directed by Engineer-in-Charge.

M & L for 2.0 mm thick of 01 coat of Painting lines, dashes, arrows, letters, etc. on roads pavements and the like n exc 10cm wide with road marking paint, white or golden yellow complete all as specified and directed by Engineer-in-Charge. Note :- Road marking paint work to be carried out ar per IRC pattern with thermo plastic paint of approved make and mix with 8% mica sign applicator machine. no extra cost is admissible for the same.

Demolition of concrete in ground floors and paving not exc 15cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new or previously untreated surfaces of any description over 10 cm girth or width, not otherwise described and applying two coat of Plastic emulsion paint over a priming paints plaster coat complete all as specified and directed by Engineer-in-Charge.

M&L for 100 mm thick cement concrete type D-2, 1:4:8 (40mm graded crushed stone aggregate) as in sub base complete all as specified and directed by Engineer-in-Charge.

M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

Excavation in post holes (or similar holes) n. exc 0.50 cum, getting out, returning filling in and ramming earth in soft / loose soil or broken rubble mixed with earth around in layers not exc. 25 cm, watering and securg surplus soil complete all as specified and directed by Engineer-in-Charge.

Dismantling of road sign boards ao any shape, type, size, sections incl taking out embedded portion in PCC/ natural ground and making good complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) as in foundaton, filling, mass concrete and sub floors etc. complete all as specified and directed by Engineer-in-Charge.

S&F stainless steel tube of 50mm dia (Grade-304) including welding, jointing complete all as specified and directed by Engineer-in-Charge.

S&F stainless steel tube of 40mm dia (Grade-304) including welding, jointing complete all as specified and directed by Engineer-in-Charge.

S&F 2mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type- IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5mm. The letters approximately covering upto 50% area of the board complete all as specified and directed by Engineer-in-Charge.

M/s PRABHU DAN DETHA AND COMPANY

M/S LAXMAN CONSTRUCTION COMPANY

GEMRARAMCONTRACTOR

M/S HARIOM CONSTRUCTION COMPANY