PROVN OF TILING IN BLDG NO. PE-39, PE-27, TILING, SANITARY AND PLUMBING FITTINGS IN TOILET OF BLDG NO PE-43, SENTRY BOXES IN WKSP AREA OF 238 FD WKSP COY EME AND LED SECURITY LIGHTS 06 NOS IN 115 INF BDE SIG COY AT DHANA MIL STN.

Amount

Material & labour for Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sq m on plan and not exc 1.5 m in depth and getting out in hard dense soil, complete all as specified and directed.

Excavation in trenches in any type of soil not exceeding 1.5m deep and not exceeding 1.5 m wide and getting out in soft and loose soil, complete all as specified and directed by Engineer in Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 mm deep in layers including watering & ramming etc, complete all as specified and directed.

Removal of surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed by Engineer in Charge.

Material & labour for providing Cement concrete Type D2 1:4:8 using 40mm graded stone aggregate as in foundations, filling and mass concrete, complete all as specified and directed.

Material & labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6), complete all as specified and directed.

Material & labour for 40 mm Thick Damp proof course in cement concrete type B0 1:2:4 to horizontal or vertical surfaces including necessary formwork using water proofing compound @ 3% by wt of cement, complete all as specified and directed. (DPC will be measured separately)

Spreading and levelling of soft loose soil in floor in layers not exc 25 cm thick including well ramming watering as required, complete all as specified and directed.

Material & labour for cement concrete 100 mm thick type D2 1:4:8 (40 mm graded stone aggregate) in sub base of flooring, complete all as specified and directed.

Material & labour for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded granite stone aggregate) in flooring including finishing the surface even and smooth with using extra cement, complete all as specified and directed.

Material & labour for 25mm thick PCC type B-1 (1:2:4) (20mm graded stone aggregate) as in flooring, complete all as specified and as directed

Material & labour for formwork to soffits of suspended slab such as roof slabs, floor slabs, landing and similar works not exc 200 mm thick for rough finished surface etc, complete all as specified and directed.

Material & labour for formwork to sides and soffits of floor or beams for rough finished surface, complete all as specified and directed.

Material & labour for formwork to edges of concrete flats, trades, breaks in floors, window sill, opening in concrete wall etc n exc 20cm wide, complete all as directed by Engr in Charge.

Material & labour for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confirming to IS, complete all as specified and directed.

Material & labour for Mild steel bars 6 to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confirming to IS, complete all as specified and directed.

All as per Item No. 16 above But 5 mm and over upto 10 mm dia in stirrups, spacers and binders, complete all as specified and directed.

Material & labour for RCC Nominal Mix Type B-0 1:2:4 20 mm graded aggregate as in lintels upto 1.5m clear span, seismic and other similar bands including use and waste of formwork all as specified and as directed by E-in-Charge

Material & labour for RCC Type B-0 1:2:4 20 mm graded aggregate as in slab supported on walls, beams and columns in floor, roofs landing balcony canopies, deck slab and the like all complete all as specified and directed.

Material & labour for rendering 15 mm thick in CM(1:6) on fair faces of brick work/concrete surfaces, finished even & smooth (without using extra cement), complete all as specified and directed.

Material & labour for rendering 10 mm thick in CM(1:4) on fair faces of brick work/concrete surfaces, finished even & smooth (without using extra cement), complete all as specified and directed.

Material & labour for rendering 15 mm thick in two layers on PCC block masonry in CM(1:4) first coat 10 mm thick & second coat 5 mm thick including water proofing compound in second coat with even & smooth (without using extra cement), complete all as specified and directed.

Supply only integral water proofing compound conforming to IS 2465-1975, complete all as specified and directed.

Material & labour for hardcore of broken stone or boulders of gauge exc 63mm but not exceeding 100 mm deposited, spread and leveled in layers not exceeding 15 cm thick watered and rammed to a true surface, complete all as specified and directed.

Material and labour for 75mm thick cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate finished even & smooth without using extra cement as in plinth protection including forming joint to full depth at every 3.0m informal and at every charge of direction and filled mixture of bitumen and sand (1:3) by weight, complete all as specified and directed.

Material and labour for 3 coats of white wash including preparation of newly plastered wall surface, complete all as specified and directed.

Material and labour for 2 coats of white wash including preparation of newly plastered ceiling surface, complete all as specified and directed.

Material & labour for 15mm thick cement screed bed in cement mortar 1:4 on concrete surface of roof fair and even finished surfaces. complete all as specified and directed.

Material and labour for 50mm thick plain cement concrete type D2 (1:4:8), (40mm graded aggregate) as in sub base of floor, path etc, complete all as specified and directed.

Material & labour for sand cushion for fixing of inter locking tiles complete all as specified and directed

Material and labour machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, approved colour and design laid over 50mm thick sand cushion all as specified and directed.

Material and labour for cement concrete 1:2:4 type C-1 using 20 mm graded stone aggregate for fixing hold fast, copping, cills and filling in pressed steel door frames including necessary form work and finishing the surfaces to match with existing, complete all as specified and directed.

Material & labour for roughening of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust etc. complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.

Material & labour for Non-skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Material & labour for Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Material & labour for glazed coloured ceramic tiles in vertical surfaces 300 x 600 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match colour over 10mm thick rendering in CM (1:4) complete all as specified and directed.

Supply and fixing 15mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply and fixing 25mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply and fix angular stop valve with wall flange, complete all as specified and directed. Make:- Jaquar (Queen's Series) Cat No. QQT-7053

Supply and fixing 15mm bore CP bib tap with wall flange, complete all as specified and directed. Make:- Jaquar (Queen's Series) Cat No. QQT-7037

Supply and fixing couple closet bowl-WC with UF seat cover, hinges and accessories set size 650 x 360 x 800, S-trap 250mm, complete all as specified and directed. Make Jaquar (Opal Series) cat no. OPS-WHT-15751 UFS with and including flushing cistern of Jaquar (opal series) cat No. ZPS-WHT-15201

Supply and fixing brass CP jet spray for EWC including PVC connection 1.2mtrs, complete all as specified and directed. Make Cera (Ist Quality) or equivalent.

Supply and fixing soap dish, complete all as specified and directed. Make :- Jaquar (Queen's series) Cat No. AQN-7731

Supply and fixing chromium plated tubular towel ring, complete all as specified and directed. Make :- Jaquar(Queen's series) Cat No. AQN-7721

Supply and fixing stainless steel toilet paper holder with flap recessed type, complete all as specified and directed. Make :- Jaquar(Queen's series) Cat No. AHS-1553

S&F Vitreous China wash basin, white flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and pedestal, complete all as specified and directed.

Supply and fixing CP wash hand basin mixer with regular spout with pop-up waste system with and incl. 450mm long braided hoses, complete all as specified and directed. Make :- Jaquar(Queen's series) Cat No. QQT-7169B

Supply and fixing wall mixer 3-in-1 system with provision of both overhead shower and hand shower complete with 115mm long bend pipe, connecting legs, and wall flanges overhead and hand shower, complete all as specified and directed. Make :- Jaquar(Queen's series) Cat No. QQT-7281

Supply and fixing overhead shower 300 x 200mm oval shape single flow (ABS body) chrome plated with grey face plate and rubbit cleaning system, complete all as specified and directed. Make :- Jaquar(OHS series) Cat No. OHS-49497

Supply and fixing ABS body chromium plated hand shower of 140mm dia round shape multi-flow with air effect & rubbit cleaning system incl. 1.5mtr long braided hose with nipple, rubble washer O ring and suitable bracket etc. to fix with wall mixer, complete all as specified and directed. Make :- Jaquar(Air shower series) Cat No. HSH-1729

Supply and fixing ABS body health faucet with 8mm dia 1.2m long easy flex tube in chrom finish with wall hook including, NRV, complete all as specified and directed. Make :- Jaquar(Allied series) Cat No. ALD-CHR-579

Supply and fixing cabinet mirror 350mm x 450mm x 100mm in PTMT alloy body and shelves with approved pattern and design complete all as specified and directed. Make:- Prayag Cat No. 551 or equivalent as approved.

Supply and fixing shower arm 400 x 25 x 25mm square shape for wall mounted shower with flange, complete all as specified and directed. Make :- Jaquar Cat No. SHA-455L400

Supply and fixing tumbler holder, complete all as specified and directed. Make :- Jaquar(Queen's) Cat No. AQN-7741

Supply and fixing PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm bore, complete all as specified and directed.

Supply and fixing sheet glass self assembly consisting of 5.5mm thick sheet glass self 12cm wide with chromium steel bracket and chromium plated guard and railing 60cm long complete all as specified and directed.

Supply and fixing wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples, complete all as specified and directed.

Supply and fixing powder coated anodised aluminium frame (box type) for ventilators with one or more rebates including grills, joining cleats, for fixing wiremesh or glass, etc, complete all as specified and directed.

Supply and fixing 90 Watt Neo 5700K LED New generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaries with high power LED as light source inbuilt surge protection, PF not less than 0.95 and THD less than 10 including suitable size galvanised iron pipe light grade bracket bent to shape overall length 1.2 mtr fixed to pole with 2 Nos clamps made of flat iron of size 25 x 6mm and suitable bolts and nuts with washers, including PVC insulated copper conductor multi stranded single core 2.5 Sqmm from fitting to OH line/up to looping terminal box complete all as specified and directed. Make- Cat no. LHETBXU7PN6J090 of Havells or Equivalent in Philips, Wipro etc.

Supply and fixing in replacement automatic street light switch for automatic switching of street light/high mast light (timer switch) based on lux level of natural light. The sensor along with suitable power contractor as per IEC - 60947-4-4 , MCB and support terminal and enclosed in pole/wall mounted factory made PVC enclosure made out of rust , shock, termite proof and FR grade confirming to IP 54 of capacity 5 KW, Single phase , 240 V, complete all as specified and directed. Make- Kaktiya Energy system (model - SWADEEP 02EC 5kW1P or equivalent model of /philips/Havells)

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core, complete all as specified and directed.

Supply and laying sand cushioning for cable protection in trenches 8 cm before laying of cable and 15 cm deep over the cable complete all as specified and directed by Engineer in Charge.

Supply and laying bricks well burnt clay old size bricks, sub class 'B' Designation 75 complete all as specified and directed by Engineer in Charge.

NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 1065.00 /- ]

Pandey Construction and Engrs