Construction of U.G. Water Tank, Pump Room, Boundary Wall, Basement and stilt flooring etc. Work at J.C. Bose University, Faridabad.

Amount

Earth Filling under floors with Tibba sand taken from outside the campus area with all lead & lift, including loading, unloading, laid in 15 cm layers including ramming, watering compensation of earth etc. or equivalent with the prior approval of Engineering In Charge.

Providing and fixing galvanized chicken wire mesh (24 gauge 12 mm size) to junctions of concrete and masonry work and other locations including cutting to required sizes, side laps of minimum 75 mm and fixing in position with galvanized iron wire nails,or equivalent with the prior approval of Engineering In Charge.

Providing and Fixing SS ball bearing hinge (4 x 3 x 3mm) - Godrej or equivalent make as per prior approval of Engineer-in-Charge.

Providing and Fixing SS finish door stopper - Model Godrej or equivalent make as per prior approval of Engineer-in-Charge.

Providing and Fixing SS back stopper - Model Godrej or equivalent make as per prior approval of Engineer-in-Charge.

Providing and Fixing NEH 03 Pull handle - Model Godrej or equivalent make as per prior approval of Engineer-in-Charge.

Providing and Fixing Ebco SS 304 friction stay 12" (for ventilators) - Model FRS 10HL of Ebco or equivalent make as per prior approval of Engineer-in-Charge.

H/W Window Providing and Fixing Ebco SS 304 friction stay FRS 14 HL - of Ebco or equivalent make as per prior approval of Engineer-in-Charge.

Providing and Fixing Tower bolt 12" Aluminium - Godrej or equivalent make as per prior approval of Engineer-in-Charge.

Providing & Fixing in position MS/ GI heavy class Flanged/ Threaded sleeves duly hot dip Galvanised of desired length as per design with MS Puddle Flange fabricated out of 6 mm thk Plate in RCC walls of Water tanks/ Retaining walls Sump during the time of Casting the same or equivalent with the prior approval of Engineering In Charge.

providing and fixing 10mm thick multiwall polycarbonate sheet roof cladding at all levels as per pattern for skylight roof cladding and specials with necessary aluminium extrusions with EPDM gasket, cutting, fabricating, erection at all levels with paintings all fixtures and fixing accessories such s self drilling, self taping fastener including cost of all materials, tools, tackles, equipment, preparation of shop drawings etc. all complete as per specifications and as directed. (N.S.ITEM) Make: tuflite, danpolon rate based on agrrement No. 85 or equivalent with the prior approval of Engineering In Charge.

Supply and installation of " CS" make ASM200, ceiling to ceiling, surface-mounted metal wall and ceiling expansion joint cover application for 50mm expansion joint gap. The cover plate engages a “J-Hook” and locking channel for attachment. The model will be extruded with 6063-T6, ASTM B221 alloy and supplied with Duroflex Gasket (Single Durometer – 80 Shore A, ASTM D2000, Color – Gray). Proposed model will provide ±50% movement. Clear anodize finish. Kynar® painted top plates available..(N.S ITEM) Make: " CS" make ASM200 or equivalent with the prior approval of Engineering In Charge.

Supply and Installation of " CS" make ZB200 expansion joint cover for floor to floor application for 50mm expansion joint gap. Hinged assembly can accommodate slab offset in floor elevation & includes slip-resistant serrations. The model will be extruded with 6063-T6, ASTM B221 alloy & supplied with Single hinged plate design is anchored to only one slab allowing movement over the adjacent slab, including vapour barrier. Standard vehicular loading (3,000 Ib. load per IBC 2009).Make: " CS" make ZB200 or equivalent with the prior approval of Engineering In Charge.

Providing & laying driveway tiles from AGL (Tabula Beige model 9.5mm thickness or equivalent in 20 mm thick bed of cement coarse sand mortar 1:3 with neat cement slurry between joints and over the base in floors, treads of steps and landings, including rubbing and polishing Laying and fixing vitrified/ceramic anti skid tiles (HSR 14.93) labour rate Make: SOMANI, JOHNSONS, AGL or equivalent make complete in all respect with the prior approval of Engineering In Charge.

Supplying of 15mm to 18mm thick slab of pre polished granite stone as specified as per sample approved by the Engineer In charge. Note 1. Laying of granite will be paid under item no HSR(14.95) & (14.96 ) 2. Measurement shall be maid as per finished floor/wall etc on actual basis or equivalent with the prior approval of Engineering In Charge.

Leather brown

Cheema Pink Note 1. Laying of granite will be paid under item no HSR(14.95) & (14.96 ) 2. Measurement shall be maid as per finished floor/wall etc on actual basis.

Supplying, installation testing and commissioning of surface type LED downlighter of philips make cat no. SM 251C LED16S-4000 PSU WH or equivalent as per tender makes. Item shall include mounting accessories and 3core 1.5 sq mm flexible copper cable from point to fixtures and making necessary connections or equivalent make complete in all respect with the prior approval of Engineering In Charge.

Supplying, installation testing and commissioning of IP65 dust and waterproof LED luminaire of philips make cat no. WT201C LED44SS-4000 PSU L120 or equivalent as per tender makes. Item shall include mounting accessories and 3core 1.5 sq mm flexible copper cable from point to fixtures and making necessary connections or equivalent make complete in all respect with the prior approval of Engineering In Charge.

Supplying, installation testing and commissioning of industrial batten LED luminaire of philips make cat no. BN308C LED40S 6500 L120 PSU WH or equivalent as per tender makes. Item shall include mounting accessories and 3core 1.5 sq mm flexible copper cable from point to fixtures and making necessary connections or equivalent make complete in all respect with the prior approval of Engineering In Charge.

FANS AND EXHAUST FANS:- Supplying, Installation, testing and commissioning of Exhaust fans/ wall fan/Ceiling Fans of following sizes including making the holes to suit the size of the fan and making good the damages, including providing and fixing of louvers/shutters, connection, testing and commissioning.

Exhaust Fan 380 mm Heavy Duty Havells, Usha, Orient, Crompton or equivalent make complete in all respect with the prior approval of Engineering In Charge.

M S PIPE , VALVES AND FITTINGS:- Providing , laying ,testing and coimmissioning of 'C' Class heavy duty M.S pipe confirming to IS 1239/ 3589 i/c fittings like elbows ,tees, flanges, tapers, nuts bolts, gasket etc, fixing the pipe on wall / ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete as required for the following sizes Make:-PRAKASH SURYA/ JINDAL ( Hisar) or equivalent make complete in all respect with the prior approval of Engineering In Charge.

25 mm dia

32 mm dia

40 mm dia

65 mm dia

80 mm dia

100 mm dia

125 mm dia

150 mm dia

200 mm dia

Providing, fixing , testing and of commissioning of Butterfly valves PN 1.6 with EPDM/Nitrile seat with nuts bolts washers, gaskets conforming to IS 13095 / BS:593 of following sizes as required for the following sizes as required Make :- Advance / ZOLOTO/ AIP or equivalent make complete in all respect with the prior approval of Engineering In Charge.

200 MM DIA

150 MM DIA

100 MM DIA

80 MM DIA.

65 MM DIA.

50 MM DIA.

Gun Metal Ball Valves ISI Marked screwed type tested to 20 kg/cm2 pressure ( IS-778-1984) of the following sizes Make:- Zoloto / Sant /AIP or equivalent make complete in all respect with the prior approval of Engineering In Charge.

(a) 25 MM DIA.

(a) 32 MM DIA.

(a) 40 MM DIA.

Providing, fixing , testing and of commissioning of dual plate , non-return valve confirming to IS :5312 complete with rubber gasket , GI Bolts , nuts , washers etc as required of following sizes Make:- ADVANCE /AIP or equivalent make complete in all respect with the prior approval of Engineering In Charge.

150 MM DIA

80 MM DIA.

40 MM DIA / 50 MM DIA

25 MM DIA N.A.

Supplying, Installing and Commissioning C. I. Flanged "Y" type Strainer with SS mesh,suitable flanges, nuts, bolts, gaskets etc. complete for the dia of Make: ZOLOTO / Sant /AIP or equivalent make complete in all respect with the prior approval of Engineering In Charge.

Providing and fixing Air Vessel made of 250mm dia , 8 mm thick MS Sheet , 1200 MM in height , with 25mm dia air release valve with brass isolating ball valve, flanges/union, suitable for sprinkler/wet riser/down comer system with drain arrangement with 25 mm dia Gun Metal Valve with all necessary connections complete in all respects or equivalent make complete in all respect with the prior approval of Engineering In Charge. FIRE PUMPS & ACCESSORIES Supply, fixing testing and commissioning of electrical motor driven fire pump, suitable for automatic operation consisting of following. KIRLOSKAR/ WILO Make or equivalent make complete in all respect with the prior approval of Engineering In Charge. Horizontally mounted, centrifugal fire pump as per IS: 1520 complete for delivery of under mentioned discharged against desired mentioned head so as to ensure a minimum pressure of 30 meter at the highest and fartherst outlet at the specified flow complete with necessary strainers, 100mm dia dial pressure gauge of calibratin 0-15 kg/sq cm including by pass arrangement ofor periodic testing of the working of the pumpset as well as testing of automation , anti vibration pads , for proper completion of work. The pump shal be capable of giving 150% of rated discharge at head not less than 65% of rated head. The pump shall be provided with mechanical seals. The impeller shall be enclosed type and accurately balanced dynamically. The pump casing shall be of cast iron, impeller shall be of bronze and shaft shall be of stainless steel. Make: Kirloskar/Mather+Platt) or equivalent make complete in all respect with the prior approval of Engineering In Charge.............

Squirel cage TEFC induction motor as per IS: 325, suitable for 415 V,3 phase IP 55 protection and class ‘F’ insulation vaccume impregnated windings with heat and moisture resisting varnish for the avove pump and flexible coupling with the pump. The motor shall be rate for continuous duty and shall have HP rating necessary to drive the pump at 150% of its rated discharge at 65% of rated head. Common bed plate of fabricated mild steel channel or cast iron type, coupling, coupling guard ets as required. Suitable cement concrete pump foundation and vibration clamping arrangement as required with foundation bolts anti vibration pads washers etc. (a). Pressure switch for automatic operation of motor including necessary Copper Cabling/ wiring upto control panel. Main Fire Hydrant Pump / Sprinkler Pump i) Type of Pump-------------------------- End Suction ii) Capacity 2280 LPM iii) Head 80 M iv) HP of Motor As required but not less than 60 HP

Fire Jockey Pump i) Type of Pump-------------------------- End Suction ii) Capacity 180 LPM iii) Head 80 M iv) HP of Motor As required but not less than 12.5 HP v) Motor RPM 2900

Water Supply Pumps ( 2 W + 1 NW ) i) Type of Pump-------------------------- End Suction ii) Capacity 100 LPM iii) Head 40 M iv) HP of Motor As required 5 HP+C74 v) Motor RPM 2900

Supply, installation, testing & commissioning of Diesel Engine Driven common stand by pump, horizontal centrifugal end suction type, capable to deliver 2280 LPM at 80 m head. The pump shall be coupled to suitable HP of Diesel engine, radiator water cooled type with suitable speed and complete set shall be mounted on common base frame. Batteries 12/24 V & battery leads with stand, Fuel tank with stand & gauge glass, Fuel piping with valves. The quoted rate shall includes Pressure gauge,Pressure switch, interconnecting cable, coupling gaurd, anti vibration pads Aluminium, and other standard accessories, and foundation bolts (as recommended by manufacturer) etc. complete and the capacity of the day tank should be 6 Hrs of the SFC with support structure anchoring arrangement, with all controls and valves strictly as per approved SLD. KIrloskar/Mother -Platt or equivalent make complete in all respect with the prior approval of Engineering In Charge.

PUMP CONTROL CENTRE (CPRI APPROVED):- i) Fabricating & Supply, installing, testing and commissioning of compartmentalized common control panel for Electrical motor driven pumps - colour RAL 7035, free standing and top entry. Please refer the panel specs for more details.( Current density shall be 0.8 amp / sqmm), Front access only. The Gland plate shall be 3mm thick or equivalent complete in all respect with the prior approval of Engineering In Charge.

OUTGOING:- Feeder for 60 HP Main Electrical Pumps – 1 Nos. 1 No.250A TPN MCCB - 35 KA, TM based release. Motor Duty

Illumated push button for Start & stop Indicating Lamps for Jockey, and two main electrical pumps. For Diesel Engine Pump - 85 HP - 1 No.

c) 2 sets of push button stations for the following : 1. Engine Start 2. Engine Stop 3. Engine - hooter ACK 4. Engine - fault reset

e) Auxiliary relays / contractors / timer for sequence operating for starting and stopping of the engine - 1 set.

f) Hooter for audio alarm (Industrial type) - 1 No.

g) All the components shall be housed in a common cubical made of 16 swg. M.S. sheet with required stiffeners ( if required). The panel shall be powder coated of required approved colour both inside & out side. The panel shall have both bottom & top cable entry provision.

h. Spare MCBs 1. 63 A TP MCCB 25 KA---- 2 Nos 2 32 A MPCB --- 2 nos

All interconnecting power & control wires/cables of suitable size within the panel and from panel to motors, diesel engine, pressure switches, level switches etc. including brass glands and termination within fire pump house and earthing as per specifications (power cable size shall not be less than 3.5 c x 120 mm sq. for main pump motor and 4 x 10 mm sq. XLPE Al armoured for Jockey pump motor./ Water supply Pumps or equivalent complete in all respect with the prior approval of Engineering In Charge.

Providing and fixing flexible expansion joints (rubber bellows) for suction and discharge of pump header suitable for raw water upto 70 deg.c (working pressure of 10-15 kg/cm2). KANWAL/ RESISTOFLEX make or equivalent make complete in all respect with the prior approval of Engineering In Charge.

25 MM DIA NB

40 MM DIA NB

50 MM DIA NB

80 MM DIA NB

100 MM DIA NB

150 MM DIA NB

Supply, assembling and installing all the materials for making GI plate earthing station as per latest edition of is 3043 comprising of 1 no. GI earthing plate 600x600x6 mmhick, 20mm dia medium class gi watering pipe, minimum 4.5 mtr deep gi funnel with stainess steel wire mesh, watering chamber made out of bricks and covered with steel hinged door on a sel frame, 50 kg of common salt, 100 kg of fine charcoal powder, earthing conductor of size 50x6 mm gi from plate to ground level, required hardware etc.

Providing & fixing g.i. earthing strip of size 32 mm x 6 mm including clamps, screwed, saddles or equivalent make complete in all respect with the prior approval of Engineering In Charge.

PORTABLE FIRE EXTIGUSHERS

Fire extinguishers ABC dry powder 6Kg capacity. (Make: Minimax / Safex / SAFEGUARD) or equivalent make complete in all respect with the prior approval of Engineering In Charge.

H2O / Co2 9 Ltr Capacity (Make: Minimax / Safex / SAFEGUARD) or equivalent make complete in all respect with the prior approval of Engineering In Charge.

Co2 4.5Kg Capacity (Make: Minimax / Safex / SAFEGUARD) or equivalent make complete in all respect with the prior approval of Engineering In Charge.

Supply & fixing of MS round bottom fire buckets of 9 liters capacity filled with sand including proper supporting/hanging arrangements in MS fabrication painted by fire red color over two coats of primer complete in all respects as per the directions of engineer in charge.

Bidder Name

Amount

Rajesh Kumar Batra Contractor

Sh. Shanker Singh Tomer

SFA and Associates

Rajesh Kumar Batra Contractor

SFA and Associates

Sh. Shanker Singh Tomer

SFA and Associates