Karnataka

Active

Works

Lift Irrigation Scheme

Providing Lift Irrigation Scheme from Ghataprabha river to the lands of farmers of Lolasur village in Gokak Taluka, Dist-Belagavi (4702/2025-26)

Minor Irrigation Department

Minor Irrigation Division Belgaum | Belagavi, Karnataka

Amount: ₹1.3 CrCloses: 10 Sept 2026Due today

Timeline

Published3 Sept 2026
Pre-Bid Meeting9 Sept 2026
Closes10 Sept 2026
Bid Opening11 Sept 2026

Tender Value

₹1.3 Cr

EMD Value

₹2.0 L

Closing Date

10 Sept 2026, 4:00 pmDue today

Tender Inviting Authority

Office Inviting Bids

Minor Irrigation Department

Contact Person

Mahadev B

Mobile Number

Work Description

Providing Lift Irrigation Scheme from Ghataprabha river to the lands of farmers of Lolasur village in Gokak Taluka, Dist-Belagavi (4702/2025-26)

Tender Information

Tender ID

MI/2026-27/LI/WORK_INDENT12606

Reference Number

MI/2026-27/LI/WORK_INDENT12606

Tender Type

Open

Product Category

Lift Irrigation Scheme

Form of Contract

Two Tender Document System(Two Cover)

Location

Minor Irrigation Division Belgaum

Source Website

Subscribe to view

Documents Required

10 documents required · 10 mandatory

Technical Bid

RequiredAnnual Turnover Certificate with Profit & Loss Account statement as per KW-4 Qualification of The Tenderer

RequiredCompany / Contractor Registration Certificate

RequiredWork done certificate as per KW-4 Qualification of The Tenderer

RequiredWork done certificate showing quantities of different items executed

RequiredBank credit certificate as per KW-4 Qualification of The Tenderer

RequiredWork in Hand as per KW-4 Qualification of The Tenderer

RequiredGST registration Certificate

RequiredPAN & TAN Certificate

RequiredScanned signature of the bidder/representative to be attached while uploading the bid document

RequiredContractor should upload their letter head with address details and contact number

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The Bidder shall ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of KPPP on or before the last date of bid submission.

The tenderer is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidder s end

EMD payments through e-payment mode shall be made as one single transaction and payments made in the part are liable for rejection.

The Tender are invited as per Standard Tender bid document KW-4

Conditional Tenders will not be considered

All relevant documents as per the KW-4 need to be uploaded while submitting bid in general documents provision in KPPP portal.

The Employer reserves the right to accept or reject any of the tender without assigning any reason.

The contractor has make his own arrangements for procurement of all the required materials and the materials so procured shall confirm to the relevant IS Specifications or Equivalent and obtain necessary quality certificate from authorized quality control.

The Contractor is fully responsible for the Equipment / Material until the same is handed over to the EXECUTIVE ENGINEER in an operating condition after commissioning. The Contractor is responsible for the proper maintenance of equipment / material as well as protection of the same against theft, elements of nature, damages etc., while in his custody as well as after erection until the same is taken over by the EXECUTIVE ENGINEER under due acknowledgment in writing

All the documents required as per technical qualification criteria needed to be uploaded in Original or Attested by any official not below the rank of Executive Engineer or Notary

The Contractors should submit all the Documents as uploaded in Original or duly attested by a Notary/an officer not below the rank of an Executive Engineer on or before opening of Technical Bid as Notified.

Name, address, and telephone, telex, and fax numbers of the contractor is to be provided

The contractor has to furnish Additional security deposit for unbalance tender as per clause 29.1 of ITT, to an amount equal to difference in contract price and amount put to tender, in addition to 5% performance guarantee (in any of the form prescribed) while concluding the Agreement.

Unique Document Identification Number (UDIN) from Practicing Chartered Accountant is preferred in Annual Turn over

The intending bidders are advised to visit the site of work and make themselves familiar with the local situation regarding the availability of the construction materials, workmen, land required for construction activities etc.

The tenderer shall also disclose if there are any bankruptcy proceedings against him.

The Contractor shall provide work program as per Clause 25 under the chapter Time control of conditions of contract. The contractor should adhere to the accepted execution plan submitted by him under any circumstances without linking to the pending payment of the work.

During the execution of the works, if any minor minerals are required, contractors have to abide by the Karnataka Minor Mineral Concession Rules 1994 (as amended up to date). As per the prevailing rules for any use of minor minerals the contractor has to submit the Mineral Dispatch Permit obtained from Mines and Geology Department. If Mineral Dispatch Permit (MDP) is not submitted by the contractor along with the bill, the prevailing penalty and DMF contribution as per Karnataka Minor Mineral Concession Rules 1994 ( as amended from time to time) will be deducted from the contractors bill at the time of payment

The Work Done Certificates shall be issued by the Executive Engineer (if work done in Karnataka State), otherwise it shall be issued/ counter signed by Superintending Engineer (if work is done in other states).

A copy of GST registration certificate should be uploaded

The contractor shall quote the rates without adding GST for either materials or works contract (Service). GST payable by the contractor under this works contract will be paid to the contractor separately over and above the contractor s bid amount. The increase if any in the GST shall not be paid in the extended period of Contract for which the Contractor alone is responsible for delay as determined by the Authority.

Estimate rates are excluding GST as per Common SR 2023-24 and prevailing GST (18 Percent of Amount put to Tender) amount is kept in form of Overhead sum in sanctioned estimate. According to guidelines in Common SR Amount put to tender and ECV amount are including GST. KPPP Portal format has No Options to add GST separately. The item wise rates do not include GST. Hence, GST will be paid separately for the quoted amount accordingly. Declaration Certificate must be attached mandatorily

If the GST rates are revised during the contract period, payment will be made/withdrawn accordingly

For Works estimate cost more than Rs. 100.00 Lakhs : For Quality control tests of materials the contractor should provide required Rammer with Core Cutter, Balance and Moisture Meter, size 15x15x15 cms Mould Sets and for testing of sand and metal set of required mesh etc.

Technical Criteria

General

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

Satisfactorily completed (at least 90% of the Contract value), in last five years (i,e. 2021-22 to 2025-26) as prime contractor, at least one similar work such as Providing Lift Irrigation Scheme work to an extent of 50% of the cost of the work Rs.68.00 Lakhs. Work Done Certificates shall be issued by the Executive Engineer (if work done in Karnataka State), otherwise it shall be issued / counter signed by Superintending Engineer (if the work is done in other states)

Work Done Certificate

Executed in any one year, the following minimum quantities of work -Excavation and Embankment (combined quantities)-16000.00 Cum, Providing & installing PVC Pipes 6Kg/m2 160mm dia & 140 mm dia-11400.00 Rmtr, Supply & fixing of Mono-Block Centrifugal pump sets 10HP with electrical-2 Nos.

Others -- Work done certificate showing quantities of different items executed

Capabilities of Vendor

Should have been registered as Contractor in PWD

Others -- PWD Registration Certificate

A Copy of GST Registration Certificate

GST Registration

Income Tax :Latest copy of the Income Tax Clearance Certificate and Sale Tax Clearance PAN and TAN Nos.

Others -- PAN and TAN Nos.

Scanned signature of the bidder/representative to be attached while uploading the bid document

Others -- Scanned signature

Contractor should upload their letter head with address details and contact number

Others -- Letter head

Financial Status

To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. (2021-22, 2022-23, 2023-24, 2024-25, 2025-26) (a) Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.270.00 Lakhs. Financial turnover of previous years will be given a weightage of 10% per year to bring them to price level of FY 2026-27

Audited CA Certificate of Annual Turnover

Liquid assets and /or availability of credit facilities of no less than Rs.68.00 Lakhs (Credit lines/ letter of credit/ certificates from banks) for meeting the fund requirement etc.

Line of Credit

Assessed available tender capacity-AxNx1.5-B where A-Maximum value of civil engineering works executed in any one year during the last five years (2021-22 to 2025-26) (updated to 2026-27 price level) taking into account the completed as well as works in progress. N-Number of years prescribed for completion of the works for which tenders are invited. B- Value at 2026-27 price level of existing commitments and on-going works to be completed during the next 6/12 years (period of completion of the works for which Tenders are invited) Note-The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.

Others -- Work in Hand

Fee & Financial Details

Tender Fee Amount

₹3,370

EMD Fee Amount

₹2.0 L

Important Dates

Last Activity

4 Sept 2026

Published

3 Sept 2026

Bid Opening

11 Sept 2026

Download Ends

9 Sept 2026

Pre-Bid Meeting

9 Sept 2026

BOQ Preview

•

Amount

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & boning rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required, utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Para 3.1 to 3.1.11 and 1.1 to 1.17.1 of detailed Specification) All kinds of soils.

•

Earth work excavation for pipeline trenches in all kinds of by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of slumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required, utilising the available excavated earth locally for the work and all other appurtenances to complete in the following strata etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Para 3.1 to 3.1.11 and 1.1 to 1.17.1 of detailed Specification) Ordinary/soft rock (without requiring blasting)

•

Providing & fixing Rabbit ACSR Conductor etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Description of item (with brief specification and reference to Book of Specification)

•

Amount

•

Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of various dia. with body bonnet of ductile iron (DI)conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vaccum tight and100% leak proof with face to face dimensions as per IS 14846-2000 only.The stem sealing should be with toroidal sealing rings (minimum 2 O rings). Body and bonut should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.) etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) For PN-10:For Sluice Valve of PN -10.0 and 150mm

•

Supply and fixing of Single / Double chamber triple function tamper proof (Both the orifices to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/50. All internal parts such as float, shell with appurtenances., all cover bolts of austenitic alloy / SS 304 steel, DN 50 float of HOSTAFLON / SS 304 and gaskets and seals of EPDM. Epoxy powder coating (EP-P) inside and outside colour blue RAL5005. The valves should be designed for all the three functions i.e., 1. Large orifice for venting of large air volumes on start up. 2. Large orifice for intake of large air volumes. 3. Small orifice for discharge of pressurized air during operation etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) For PN 10.0 For TP Air Valves of 100mm dia.Supply and fixing of Single / Double chamber triple function tamper proof (Both the orifices to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/50. All internal parts such as float, shell with appurtenances., all cover bolts of austenitic alloy / SS 304 steel, DN 50 float of HOSTAFLON / SS 304 and gaskets and seals of EPDM. Epoxy powder coating (EP-P) inside and outside colour blue RAL5005. The valves should be designed for all the three functions i.e., 1. Large orifice for venting of large air volumes on start up. 2. Large orifice for intake of large air volumes. 3. Small orifice for discharge of pressurized air during operation etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) For PN 10.0 For TP Air Valves of 100mm dia.

•

Supply and fixing of Cast steel ASTM A 216 Gr.WCB double flanged Dual plate check valve Conforming to API 594 with latest amendments Shaft material shall be SS420/431 and spring shall be spring steel superior grade quality as detailed below of following diameters and types and conveying to work site, loading, unloading, stacking with appurtenances., complete with all lead and lift. The rates are inclusive of cost of Galvanised Bolts and Nuts etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) For Class 100 mm

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing and erecting direction and place identification retroreflectorised sign as per IRC:67:2012 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4mm with area exceeding 0.9 m2 fixed over back support frame of min 40 x 40 x 5mm angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing Direction and Place Identification Signs with size more than 0.9 m2 size Board etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) 10 HP, size 80x65 Head 34.50M, Discharge 840 LPM

•

Supplying and fixing LT cable of size 4 x 25 Sqm suitable for centrifugal pump sets with ISI mark and its latest amendments etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)4 x 25 Sqm

•

Supply and delivery at site brand new best make pressure guage suitable for centrifugal pump confirming to latest IS standards etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) pressure guage 100MM

•

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) Size 80 mm

•

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) Size 80 mm

•

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Supply and delivery at site delivery of best indigenous brand new MCB Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar and other end fitted with protective cover) etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) Size 80 mm

•

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges, tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as per specification, with testing of as per instructions of engineer incharge of work etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials, tools and equipments, as per specifications with testing of as per instructions of engineer incharge of work etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) 3 1/2 x 16 sqmm

•

Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Supply and delivery at site brand new best make Foot valve suitable for centrifugal pump upto 10HP confirming with ISI mark and its latest amendments etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Supply and delivery at site brand new best make level guage suitable for centrifugal pump confirming to latest IS standards etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing RCC Pole -9Mtrs Long 145KG WL for deadend, anchor points etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing RCC Pole -9Mtrs Long 200KG WL for intermediate poles etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing LT 4 Pin cross arms, with pole clamps, bolts, nuts and washers (for RCC Poles) etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing LT 4 Pin cross arms, with pole clamps, bolts, nuts and washers ( for PSCC Poles) etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing 11KV 5KN Polymeric Pin Insulators etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing 45 KN Disc Insulator etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing guy set etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing Rabbit ACSR Conductor etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing Spiral earth electrode etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing Concreting materials for guy set without cement etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing RCC Pole -8 Mtrs Long 145 KG WL etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing RCC Pole -8 Mtrs Long 200 KG WL etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing LT 4 Pin cross arms, with pole clamps, bolts, nuts and washers (for PSC Poles) etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing Guy set complete etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing Weasel ACSR Conductor etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing Spiral Earth Electrode etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing 9 Mtr RCC DP Transformer Structure (Using 9 Mtrs RCC poles) etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing 9 Mtr RCC DP Transformer Structure (Using 8 Mtrs RCC poles) etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing 11KV 5KN Polymeric Pin Insulators (24 mm dia FRP Rod) etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing 11 KV 45 KN Polymeric Insulator etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing Guy set with No.15 strain insulator & concreting materials, etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing 11KV /433V, 25KVA, 3Phase, 50 Cys Distribution Transformer BEE-4 Star Rates With Oil etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing Earthing Materials pipe type for gounding etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing Caution / Danger Board etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing Anti Climbing Device ( 12 mtrs/1Kg GI Barbed wire ) etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing Guy Concreting with Boulders, Mud and Sand etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing GI Wire 8 SWG etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing Guy Wire 7/10 SWG etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing 11KV Lightning Arrester, Metal Oxide 9KV, 5KA etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing LT Protection Kit for 25 KVA etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing LT wiring Kit for 25 KVA etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Labour charges etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing 11KV Solid Core Type HG Fuse Unit etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing 11KV, 200amps, Single Break for GOS mounting etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing Electrical Inspectorate Charges etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Description of item (with brief specification and reference to Book of Specification)

•

Amount

•

Providing & fixing Rabbit ACSR Conductor etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

electrical specifications.zip

Others - Specification • 0.05 MB

Bar Chart Office12606.xls

Others - Bar chart • 0.74 MB

standard bid document kw-4 12606.doc

Tender Document • 3.21 MB

detail specification.zip

Others - Specification • 29.02 MB

pumpingmachinaryspecification10hp.doc

Others - Specification • 0.03 MB

Drawings.pdf

Others - Drawing • 0.14 MB

banker certificate.doc

Others - Line of Credit • 0.03 MB

Royalty.pdf

Others - royalty • 0.19 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .