Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹3.6 Craccepted-aoc | ₹3.6 Cr | accepted-aoc |
Tender Value
₹3.6 Cr
EMD Value
₹5.5 L
Closing Date
27 Nov 2025, 9:30 pmClosed
Bengaluru East City Corporation
RAVI KUMAR T C
Comprehensive Development of Roads and Drains and other allied works in Garudacharpalya Doddanekkundi and AECS layout in Mahadevapura Constituency under GOK Grants
BECC/2025-26/OW/WORK_INDENT2
BECC/2025-26/OW/WORK_INDENT2
Open
Other Works
Two Tender Document System(Two Cover)
BECC Doddanekkundi Division
9 documents required · 9 mandatory
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded (Refer KW-4 Doc)
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
Banker Details for reference
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor reports for the last five years
List of Financial Resources with Certificates
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
List of existing commitments and ongoing works
List of works for which tenders already submitted
₹5,000
₹5.5 L
27 Nov 2025
19 Nov 2025
28 Nov 2025
19 Nov 2025
20 Nov 2025
Comprehensive Development of Roads and Drains and other allied works in Garudacharpalya Doddanekkundi and AECS layout in Mahadevapura Constituency under GOK Grants
Removing and Refixing stone slabs of drains and pointing in Complete as per the specification and directions of Engineer incharge.
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing & laying precast drain cover slab of 230 mm thickness in CM 1:3 including cost of all materials, labour, curing, transportation, loading, unloading etc, complete as per the directions of the...
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materi...
Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m 2 using mechanic...
Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m 2 on the prepared bituminous surface cleaned with mechanical broom
Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 at 5.2 per cent of mix and filler, t...
Road marking with hot applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectoris...
Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum.(Tipper 14 m3) (Page No. 03/ Item No. 1.1-C/PWD CSR VOL-III SR 2023-24) Cost of Haulage Excluding Loading and Unloading Case...
Earth work in surface excavation for stripping, seating of bund, Road way by manual means for lowering & levelling the ground for all works other than foundation & depth in Ordinary rock and soft rock...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever requir...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 ...
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 600X850 mm internal ...
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on ...
Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of nea...
Providing and laying of Modular wooden polished flooring of 12mm thick, high density timber of approved colour and design with end trims, transition, profiles, beading, 15mm thick felt, and 20 micron ...
Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface wi...
INTERIOR WALL PANNELING BRAND ECOTONE(SLETO)PROVIDING AND INSTALLING PINEWOOD ACCOSTIC PANNEL 16MM THK WOODEN FLAME RADIANT NRC.85 CLASS 1 FIRE RESISTENCE AND SOUND PROOF INSTALLED TONGUE GROVES ( VIN...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls at 1.25 L/10 m² over and including one coat o...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make co...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and ...
Providing and fixing aluminium tubular handle bar 32 mm outer dia,3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.: Powder coated minimum thickness ...
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. compl...
Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance 1mm) with wall thickness 2.0 mm (0.2 mm), corners of the door frame t...
Providing& fixing of Openable door made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free
Jag Fis 5953 WH WC with PP S-Cove. with includes all labour charges trasportion charges, installation charges and all other taxes with all lead and lift as per the approval of engineer incharge.
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standar...
Jag Cns 705 U/C Basin 590 x 420 x 195 with includes all labour charges trasportion charges, installation charges and all other taxes with all lead and lift as per the approval of engineer incharge.
Vetrified tiles for toilet flooring, size 450mmx450mm with includes all labour charges trasportion charges, installation charges and all other taxes with all lead and lift as per the approval of engin...
Vetrified tiles for toilet Cladding, size 600mmx1200mm with includes all labour charges trasportion charges, installation charges and all other taxes with all lead and lift as per the approval of engi...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of app...
Providing Mathi or Nandi wood frames for false ceiling, partitions etc., main battens of size 50x12.5mm at 600 mm c/c and cross battons 38mmx50mm at 600mm c/c sawn and putup including cost of materia...
Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per d...
Supplying 6 A flush typesocket and6Aflush type SP switch either surface/flushmountinginexistinggangboxor in 4mmthickplastic sheet andfixingover a flush mounted wooden box and wiring using necessary ca...
Supplying heavygaugePVCconduit pipe ....... dia .......mmthick confirming to IS 2509 with suitable size bends, junction boxes, adhesive pasteetc , andfixingusinginvertedwoodplugs incaseof RCCceilingan...
Supplying and wiring adopting loop system in existing PVCConduit/casing capping casing capping using 2x1.5 Sqmm(Phase&Neutral) &1x1.0 sqmm(Earthwire) FRLS multi strand PVC insulated copperwire (confir...
Supplying and wiring adopting loop system in existing PVC Conduit/casing capping casing capping using2x1.5Sqmm(Phase&Neutral) &1x1.0 sqmm(Earthwire)FRLS multi strand PVC insulated copperwire (confirmi...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance singlecore in open or concealed system of wiring with specifiedIS ...
Supplyingof .....feet-PVC Batten with integrated LEDtube .with high quality diffuser with Life of 25000 burning hours &70 lumen maintenance with CRI 80. Power Input: 220240V 50/60Hz & Power factor 0...
Supplying capacitor type ceiling fan complete with down rod blades,shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bea...
Supplying ......TR split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed compressor with air cooled condenser, motor capacitor and start run cap...
Supplying ......TR split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed compressor with air cooled condenser, motor capacitor and start run cap...
Principal (Excutive Mesh Chair)RMS151) with includes all labour charges trasportion charges, installation charges and all other taxes with all lead and lift as per the approval of engineer incharge.
PRINCIPAL ROOM,WISE PRINCIPAL&HEAD MASTERS ROOM TABLES-SIZE-2100MMX900MMX750 HT.,TOP-36MM THK.-VACCUM FORMED-CURVED DESIGN AT RIGHT-WENGE SHADE-MDF WITH PVC FOIL.,VERTICAL SUPPORT:25MM THK-POST FORMED...
Visitor Chair (cusion with SS Crome Plating 0 with includes all labour charges trasportion charges, installation charges and all other taxes with all lead and lift as per the approval of engineer inch...
SOFA INNER FRAME:18MM THK.PLY WOOD AND 60MM THK.SEASONED PINE WOOD,SEAT AND BACK REST:HIGH DENSITY SUPER SOFT U FOAM,FABRIC/LEATHERITE UPHOLSTERED(3 SEATER) INSPACE OFFICE FURNITURE @ CHENNAI-MODEL-SM...
CHAIRS(MAIN) ADJUSTABLE HEAD REST,NYLON FRAME SEAT AND BACK REST MESH UPHOLSTERED,FLEXIBLE LUMBAR SUPPORT,THREE WAY ADJUSTABLE ARMREST WITH PU PAD,MULTI FUNCTIONAL MECHANISM,CLASS IV GAS LIST,ALUMINIU...
Teacher Table ,Size : 4feet x2Feet x2.5feet hight ,Table top out of 19mm pre laminated board with 2mm Pvc end beading,under structure made out of 38x38mm Sq tubuler section Duly powder coated . with i...
DINING HALL TABLE WITH CHAIRS-SIZE 2400MM X 750MM X 750MM(H)- WITH 8 STOOLS, FRAME(TABLE & STOOL): 30MM DIA & 25MM DIA X 1.2MM THK, STAINLESS STEEL TUBE- 202 GRADE, TABLE TOP: 1.2MM THICK STAINLESS ST...
Drinking water tank (hot /normal ) of size : 36"x42"x42")inner tank 18 guage ss 304 grade, outer covering 20 guage ss 304 grade , frame with 1"ss angle 3mm, bottom leg with 11/2"sqleg ss 16guage,ss ch...
LED Titanium lettered name board of dimension 34 X 2
Corbondioxide Extinguisher (co2) 4.5kg with includes all labour charges trasportion charges, installation charges and all other taxes with all lead and lift as per the approval of engineer incharge.
32 LED Telivision for viewing the camera with includes all labours chargers transpotation charges instalation charges and all others taxes with all lead and lift as per aproval of engineer incharge
Removing and Refixing stone slabs of drains and pointing in C.M(1:2)Data rate
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum.(Tipper 14 m3) (Page No. 03/ Item No. 1.1-C/PWD CSR VOL-III SR 2023-24) Cost of Haulage Excluding Loading and Unloading Case...
Providing and laying in position plain cement concrete for leveling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyi...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyi...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyi...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermos Plastic Elastomer) and lead f...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing & fixing 30mm thick factory made rigid foam Prelam Paneled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pre...
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete ...
Providing and fixing in position fully paneled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...
Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smo...
Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth re...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make co...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and ...
Providing and fixing double action hydraulic floor spring of approved brand manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mec...
Providing and fixing aluminium tubular handle bar 32 mm outer dia,3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.: Powder coated minimum thickness ...
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. compl...
Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
PVC Pipe 110mm outer dia at 2kg per cm2.(Sl.NO.94 Page no. A-12 of PWD SR 23-24 Vol-3)
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. (Page no.137 Itm no.14.40.2 of SR 23-24 Vol-2)
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colour, shades except burgundy, bottle gree...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colour, shades, ex...
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in al...
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in al...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 Ltr/10 m² over and including one coat ...
Supplying and fixing PVC/metal conduit Deep junction box(Page no.2 Item no.1.5 Electrical SR Vol-6 2023-24)1.5.1:- 19/20 mm deep Junction box
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...
Supplying and fixing regular MCB distribution boards on wall/pod board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single ...
Supplying and fixing HRC fuse units base on existing switch /panel board. 6 to 16 A(P.No.15-Sl.No 5.9.1) & of Electrical SR Vol-6 2023-24
Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. 8" x 6"...
Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. 10"x 8"...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch (P.No.9-Sl.No 3.6.1) & of Electrical SR Vol-6 2023-24
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket (P.No.9-Sl.No 3.6.3) & Electrical SR Vol-6 2023-24
Supplying and fixing digital frequency meter with latest micro controller technology, ultra bright 4 digit LED display, from 30-500V AC and optional or relay output for high/low freque...
Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged fro...
Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipment on the meter board in the pit. The pits should be filled up with equal proportion of sal...
Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70percent lumen maintenance with CRI 80. Power Input: 220-240Vat 50/60H...
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 12" Sweep (300 mm) (P.No.30-Sl.No 6.2.1) & of Electrical SR Vol-6 2023-24
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...
Bescom Deposit Charge
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
tender notification becc.docx
Instructions to Tenderers • 0.07 MB
KW04.docx
Tender Document • 0.14 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .