Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.3 LAccepted-AOC | L1 | Accepted-AOC L1 Bidder | |
| 2 | L2₹18.3 L+₹1.0 L (6.04%)Rejected-Finance 63 BAJMASTA RAMBAN | RAMBAN | RAMBAN | JAMMU AND KASHMIR | L2 | Rejected-Finance Other than lowest |
Tender Value
₹17.3 L
EMD Value
₹34,600
Closing Date
21 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (Indep)
Garrison Engineer (Indep) 873 Engineer Works Section PIN 913 873 C/O 56 APO
PROVN OF TOILET, BATHROOM, COVERED BATHING POINT, ROOF SHED INCLUDING HARD STANDINGAND ADDN/ ALTN OF DINING HALL AT COB UNDER GE (I) 873 EWS
2022_MES_564415_1
NIT-61 of 22-23
Open Tender
Civil Works
Item Rate
290 days
Bhaderwah
As per NIT
7 documents required · 7 mandatory
₹500
GE(I) 873 EWS
₹34,600
Yes
28 Jan 2023
22 Nov 2022
24 Dec 2022
22 Nov 2022
21 Dec 2022
7 Dec 2022
Amount
Surface Excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and directed.
Excavating in trenches, not exceeding 1.5metre wide and not exceeding 1.5metre depth for foundation, etc., and getting out in any type of soil, complete all as specified and directed.
Excavation over areas not exc. 1.5m deep in hard/dense soil and getting out, complete all as specified and directed.
Excavation over areas exc. 1.5m deep in any type of soil and getting out, complete all as specified and directed.
Excavation in post holes (or similar holes) each not exc. 0.50 cum, in any type of soil and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25cm, watering and removal of excavated materials to a distance n. exc. 50m and making good surfaces, complete all as specified & directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick any type of soil, complete all as specified and directed.
Removing excavated soils to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Removing excavated soils to a distance exceeding 250m but not exceeding 500m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Hardcore of broken stone gauge exceeding 63mm and not exceeding 100mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surfaces, complete, all as specified and as directed.
Hardcore of broken bricks gauge exceeding 63mm and not exceeding 100mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surfaces, complete, all as specified and directed.
Plain Cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.
Sand filling under floors including watering, ramming and consolidation complete all as specified.
RCC 1:11/2:3 type A-1 (Nominal mix), design mix, using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed.
RCC 1:11/2:3 type A-1 (Nominal mix), using 20mm graded crushed stone aggregate as in columns, pillars, piers, posts and struts, complete all as specified and directed.
RCC 1:11/2:3 type A-1 (Nominal mix) using 20mm graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.
Formwork to sides of concrete foundation, footings, bases of columns, rafts and raft beams and similar work; vertical or to batter for rough finished surfaces of concrete, complete all as specified and directed.
Formwork to sides of pillars, posts, struts, columns (square, circular rectangular on plan or polygonal etc. for rough finished surfaces of concrete, complete all as specified and directed.
Form work to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces of concrete, complete all as specified & directed.
Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in in CM 1:6, complete all as specified and directed.
Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in in CM 1:4, complete all as specified and directed.
Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan any radius, built in cement mortar 1:4 in half brick wall, complete all as specified.
Cutting holes through brick wall built in cement mortar for inserting hold fast and making good dismantled portion in cmeent mortar 1:3 or cement concrete 1:2:4 type B-1 as required all as directed.
Walling of random rubble stone masonry, uncoursed well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed. Note : Volume of PCC bond stone shall be deducted from total cumulative quantity of stone masonry.
TMT bars 10mm dia & over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified & directed.
All as per Srl item No. 24 here-in-before but 6 to 8mm dia
All as per Srl item No. 24 here-in-before but 5mm dia & over upto & including 10mm dia in stirrups, spacers and binders complete all as specified & directed.
Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified & directed
Mild steel framed works such as grills, framed guard bars, etc. and similar work including bending, cutting and welding as required, Fe. 290.Gde-E- 165 complete all as specified and directed.
Mild steel rolled work as in post, roof trusses (framed), purlins, crane gantries, rails and fastening and heavy bracket framing (beam, tee, angle, square / rectangle sections, channel or flat section) including distance pieces, cleats etc. Fe 410 -W (Gde-E- 250) quality-B complete all as specified and directed.
Pre-painted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering, fixed with self taping screws, complete all as specified and directed.
Pre-painted galvalume aluminium zinc coating G.I based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / cladding to wall, fixed with self taping screws, complete all as specified and directed.
6 mm thick non asbestos fiber cement plain building boards in false ceiling on and incl aluminium snap grid work 605 x 605 mm with Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. complete all as specified and directed.
Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified
Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified.
Factory made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm plain colour PVC sheet on the back face with particle board core, supplied & fitted in the frame at site as per specification & drawings shown in SSR Part-II, complete all as specified.
Pressed steel frames of size 125mmx60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, PCC for filling of hollow portion, complete all as specified
2nd class Hard wood, glazed and skeleton shutters, 30mm thick, open rebated and prepared to receive glass or gauge etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, size of members of shutters as specified in clause 8.24 (b) of SSR Part-I, fitted to chowkat, complete all as specified.
Extruded aluminium alloy handle, fabricated type, anodised, 150mm long (ISI marked), complete all as specified.
Aluminium anodised, barrel tower bolt of extruded section and fixed, 150mm long (ISI marked), complete all as specified.
Aluminium anodised, barrel tower bolt of extruded section and fixed, 200mm long (ISI marked), complete all as specified.
Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, 300mm long, all as specified.
Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, 250mm long, all as specified.
Steel windows with side hung shutters including projecting type hinges with steel handle 100mm long, made of Z section and steel peg stay, complete with glazing bars, dovetailed or welded and two numbers MS tower bolt of 100 mm long, complete all as specified & directed.
Ditto all as per item no. 43 here-in-before but without glasing bar
Steel ventilators with top hung shutter including hinges, steel peg and stay and two numbers MS tower bolt of 75 mm long complete all as specified and directed.
Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire, staples all as specified and directed.
Butt hinges, medium weight, cold rolled, mild steel 100 mm long (ISI marked), complete all as specified.
Butt hinges, medium weight, cold rolled, mild steel 75 mm long (ISI marked), complete all as specified.
3mm thick sheet glass ordinary quality and glazing with oil putty / screws, in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.
75mm thick PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring finished even and rough, to receive floor finishes, complete all as specified and directed.
100mm thick PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed.
100mm thick PCC 1:2:4, type D-2 (using 20mm graded crushed stone aggregate) as in flooring finished even and fair complete all as specified and directed.
75mm thick PCC 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection, footpath and hard standing complete all as specified and directed.
Forming Construction joints 30mm deep x 10mm wide, filled with sealing compound grade ‘A’, complete all as specified & directed.
25mm thick PCC 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate) as in floor, finished rough to receive tiles above, complete all as specified & directed.
Non-sked ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15mm thick bedding layer in cement mortar 1:6, complete all as specified.
Glazed ceramic tiles, coloured of size 300x200x7mm/450x350x7mm as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white cement, laid over and including 10mm thick plastering in cement mortar 1:4 complete all as specified
Machine cut kota stone slab flooring, 20-25 mm thick as per sample kept in AGE(I)’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, laid over and including 20mm screed layer in cement mortar 1:4, rubbing, grinding and polishing to achieve mirror finish, complete all as specified.
Machine cut kota stone slab, 18-20 mm thick as per sample kept in GEs office as in vertical surfaces such as skirting/dado etc., laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, laid over and including 10mm thick plastering in cement mortar 1:3, rubbing, grinding and polishing to achieve mirror finish, complete all as specified.
75 mm thick plain cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in plinth protection, and laid in panels complete and finished the even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of 01 bitumen 85/25 grade and three part of sand by weight all as specified and directed.
Rendering 15mm thick in cement mortar 1:4 on other than fair face of brickwork or on one side of lathing, finished even and smooth without using extra cement, complete all as specified.
10mm thick plastering in cement mortar 1:4 on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement but using integral water proofing compound as per manufacturer,s instructions, complete all as specified. Note : Integral water proofing compound shall be measured & paid seprately.
Rendering 15mm thick in cement mortar 1:6 on other than fair face of brickwork or on one side of lathing, finished even and smooth without using extra cement, complete all as specified.
Supply only integral water proofing compound, complete all as specifed.
Bib taps 15mm bore of cast copper alloy chromium plated (ISI marked) fancy type, screwed down, high presure, screwed both ends for iron pipe or for brass ferrule, fixed in repairs, complete all as specified and directed.
Stop cock of cast copper alloy (ISI marked), fancy type, screwed down high pressure, screwed both ends for iron pipe or for unions 20 mm bore, fixed in repairs, complete all as specified and directed.
Angle or plain stop valve of cast copper alloy chromium plated (ISI marked), fancy type, screwed down high pressure, screwed both ends for iron pipe or for unions 15 mm bore, fixed in repairs, complete all as specified and directed.
Pillar tap cast copper alloy with capstan head, fancy type, chromium plated (ISI marked), screwed down, high pressure, with or without lettered 'Hot or Cold' with long screwed shank and fly nuts screwed for iron pipe complete for 15mm bore pipe, fixed in repairs, complete all as specified and direct
PVC connection 15mm size with length 450mm with PTMT nuts complete all as specified and directed.
PVC connection 15mm size with length 600mm with PTMT nuts complete all as specified and directed.
Health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1.50 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified
Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified & directed.
Brass chromium plated wall mixer for mixing hot & cold water, single hole, screwed doen for bore of pipe 15mm, fixed in repairs, complete all as specified & directed.
Glass corner shelf complete all as specified. (Make: CERA/JAGUAR)
Towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified.
15mm dia GI steel water tubing ,medium grade ISI marked, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified.
20mm dia GI steel water tubing ,medium grade ISI marked, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified.
Vitreous China wash down water closet (Pedestal pattern), white with ‘P’ or ‘S’ trap, fixing with screws of suitable size, plastic seat cover, white closed pattern with flat bottom and cover, complete all as specified, making connections to trap and to flush pipe, fixing flushing cistern etc. and making good to floors, complete all as specified.
Vitreous China, wash hand basin, flat back white of size 550mmx400mm including brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts, exclusive of waste pipe, chain and plug, porcelain stopper including cutting for and pinning in ends of brackets , complete all as specified.
Plastic water closet seat, white/black, closed pattern with flat bottom, and cover including mild steel chromium plated or aluminium hinging device complete all as specified.
PVC valveless, syphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe 90cm long, complete all as specified.
PVC (SWR) pipes, 75mm dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors/weep holes, complete all as specified & directed.
PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified & directed.
32mm bore PVC flush pipe for low level cistern complete all as specified & directed.
32mm bore PVC waste pipe for WHB complete all as specified & directed.
PVC (SWR) ‘P’ trap, bore of pipe 110mm, complete all as specified.
Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms), dia of discharge pipe 32mm, complete all as specifed & directed.
Grating square 150mm size of PTMT (minimum weight 100 gms), complete all as specified
75mm bore PVC (SWR) bends any radius, complete all as specified.
110mm bore PVC (SWR) bends any radius, complete all as specified.
Rotational moulded polythene water storage tank, white coloured, tripple layer cylindrical vertical with closed top 1000 litre capacity hoisted and fixed in position, including inlet and outlet pipe connections, 20mm dia and 15 mm dia GI pipes medium grade respectively, 20mm GI pipe medium grade over flow pipe 15 cm long wash out with plug and PTMT ball valve 20mm (Minimum weight 210 gms), high pressure with polyethelyne float and fly nuts complete all as specified and directed.
Prepration of new plastered surfaces of wall and applying two coats of oil bound distemper including one coat primer including two coat of birla /Asian wall care putty complete all as specified and directed.
Preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of oil bound distemper on walls, complete all as specified.
Preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of base paint complete all as specified.
Preparation new plastered surfaces of walls and applying two coats of cement base paint including one coat of alkali-resistant primimg paint complete all as specified and directed.
Preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified.
Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and as directed.
Plain cement concrete 1:3:6, nominal mix, type C1, using 20mm graded crushed stone aggregate as in surface channel and drains, complete all as specified.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi tred/stopped ends etc.
Precast cement concrete (1:2:4) using 20mm graded crushed stone aggregate as in landings, cover slab (for manholes etc), and similar articles with plain fair faces including chamfers, weatherings, throating etc. and setting in cement mortar (1:4) including necessary form work complete all as specified and directed.
Concrete bed to 150mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid in cement concret 1:3:6 (Nominal mix) type C-2 using 40mm graded stone aggregate, and tested, complete all as specified & directed.
Salt-glazed stoneware drain pipe, internal dia of pipe 200mm, laid in trenches and jointed and tested, complete all as specified including taking down old unservicable pipes.
Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified.
Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles and disposal of unserviceable materials, debris outside cantt area complete all as specified.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and disposal of unserviceable materials, debris and rubbish to outside cantt area complete all as specified & directed.
Dismantling wall & ceiling board (fibre, pulp, insulation etc.) or insulation boards / slabs/ blankets, any thickness, including cover fillets, complete all as specified.
Taking out carefully copper / aluminium point wiring, (Light, fan, socket or power) complete with all fitting, fixtures such as switch socket out let, ceiling rose, holder, regulator, DB's etc. including making good the disturbed surface of wall/floors, complete all as specified and directed.
Point wiring with multi stranded copper conductor of size 1.5Sqmm PVC insulated unsheathed FRLS cable in and including concealed PVC conduit of wall thickness not less than 1.8mm and accessories of suitable size for concealed wiring including 1.50 Sqmm copper earth wire (green colour) FRLS Cable for one light point or fan point or bell point controlled by one No, one way switch/one bell/buzzer point using cable of different insulation colour for colour coding including modular white cover plate with frame for mounting modular switches, sockets, fan regulator etc including cutting chases and making good to disturbed surfaces of wall / floor, complete all as specified and as directed.
All as per the description of Serial Item No 109 here-in-before but for one 3 pin socket outlet 5 Amp on same board, complete all as specified and directed.
All as per the description of Serial Item No 109 here-in-before but for one 3 pin socket outlet 5 Amp independent, complete all as specified and directed.
All as per the description of Serial Item No 109 here-in-before but for one 3 pin socket outlet 15 Amp independent board using cable of size 2.50 Sqm with 2.50 Sqmm copper conductor in green colour for as earth continuity conductor all as specified and directed.
Point wiring with multi stranded copper conductor of size 1.5Sqmm PVC insulated unsheathed FRLS cable in and including concealed stove enamelled steel conduit and accessories of suitable size for concealed wiring including 1.50 Sqmm copper earth wire (green colour) FRLS Cable for one light point or fan point or bell point controlled by one No, one way switch/one bell/buzzer point using cable of different insulation colour for colour coding including modular white cover plate with frame for mounting modular switches, sockets, fan regulator etc including cutting chases and making good to disturbed surfaces of wall / floor, complete all as specified and as directed.
All as per the description of Serial Item No 113 here-in-before but for one 3 pin socket outlet 5 Amp on same board, complete all as specified and directed.
All as per the description of Serial Item No 113 here-in-before but for one 3 pin socket outlet 15 Amp independent board using cable of size 2.50 Sqm with 2.50 Sqmm copper conductor in green colour for as earth continuity conductor all as specified and directed.
Point wiring with multi stranded copper conductor of size 1.5Sqmm PVC insulated unsheathed FRLS cable in and including PVC casing capping 20/30mm size or as required at site including its fittings and fixtures such as ties, bends, elbows and junction boxesetc. including 1.50 Sqmm copper earth wire (green colour) FRLS Cable as earth continuity conductor connected to main earthing and common earth terminal for one light point or fan point or bell point controlled by one No, one way switch using cable of different insulation colour for colour coding including 3mm thick laminated sheet cover, mild steel sunken box including cutting chases and making good to disturbed surfaces of wall / floor, complete all as specified and directed.
All as per the description of Serial Item No 116 here-in-before but for one 3 pin socket outlet 5 Amp on same board, complete all as specified and directed.
All as per the description of Serial Item No 116 here-in-before but for one 3 pin socket outlet 5 Amp independent, complete all as specified and directed.
All as per the description of Serial Item No 116here-in-before but for one 3 pin socket outlet 15 Amp independent board using cable of size 4.00 Sqm with 4.00 Sqmm copper conductor in green colour for as earth continuity conductor all as specified and directed.
Switch piano, flush type, 5/6 Amps, single pole, one way complete all as specified and directed.
Socket out let 3 pin 5 Amp, piano flush type, 240 volts complete all as specified and directed.
Switch socket outlet combination universal type, 2 in 1, 3 pin 5 and 15 Amp, piano flush type, 240 volts complete all as specified and directed.
Electronic fan regulator stepped type with five step 240 volts 100 watt suitable for 1200mm / 1400mm sweep AC ceiling fan, complete all as specified and as directed.
LED light fitting 1x20 watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up cable of copper conductor size 3-core ,23/0.0076 from ceiling rose to light fitting connector complete all as specified and directed. Make :- HAVELL's Cat No LHEXARP7SN1W020 or equivalent in Crompton /Philips
Bulk head luminaries complete with all accessories suitable for and including 1 x 10 Watts LED lamp including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 Volts 50 Hz complete all as specified and as directed. Make : Havells Cat Part No LHEOAOP7UZ6W010 / Crompton Cat Part No LBHE-10-CDL
LED light fitting mirror type with high output diffuser 2 feet, 10 watt, 220 V AC decorative colour in polycarbonate housing and all accessories pre-wired and making connections with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connector to light fitting complete all as specified and directed. Make :- HAVELL's Cat No LHEXACP5IN1W010 or equivalent in Crompton /Philips
Ceiling rose surface bakelite three terminals 240 volts complete all as specified and directed.
Sheet metal enclosure factory made single door for DB 240 volts with 200 Amps rated bus bar SPN 4 Way complete all as specified and directed.
Sheet metal enclosure factory made single door for DB 240 volts with 200 Amps rated bus bar SPN 8 Way complete all as specified and directed.
MCB SPN 32Amp 10 KA 240 Volts, 'C' Series, complete all as specified and directed.
MCB SPN 40 to 63Amp 10 KA 240 Volts, 'C' Series, complete all as specified and directed.
MCB SP 5 to 32Amp 10 KA 240 Volts, 'C' Series, complete all as specified and directed.
1100 Volt grade heavy duty cable PVC Insulated aluminium conductor, served with inner sheathing of PVC tape and over all PVC sheathed in service connection suspended by insulating hanger not more than 1 mtr apart including 4 mm suspension wire, one twin core cable flat or circular 16 sqmm stranded conductor, complete complete all as specified and directed.
Ceiling fan of size 1200mm sweep with fan regulator, 230 volts (single phase) min air delivery 210 CFM with service valuve 6.00 BEE 5 star rated with btushless direct current mortor (BLDC) including provisioning of three core flexiable copper cord of size 23/0.0076 of required length from ceiling rose or connector to ceiling fan for connection, complete all as specified & directed.
Exhaust fan with louvers of size 300mm sweep, 900 RPM, 230 volts (single phase) complete with bolts, nuts & washers, embedded in the wall including provisioning of three core flexiable copper cord of size 23/0.0076 of required length from ceiling rose or connector to Exhaust fan for connection, complete all as specified & directed
Switch universal type, piano flush type, 15 Amps, 240 volts complete all as specified and directed.
Socket outlet combination universal type, 2 in 1, 3 pin 5 and 15 Amp, piano flush type, 240 volts complete all as specified and directed.
Earthing complete with galvanized mild steel earth plate electrode size 600mm x 600mm x 6mm thick buried directly in ground (preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 3 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 Part-I, connected to test point complete, all as specified and testing on completion.
M S BANSI LAL CONSTRUCTION CO
Bidder Name
M S BANSI LAL CONSTRUCTION CO
M/S BILAL AHMED WANI
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .