Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.0 LAccepted-AOC 852 EKTA VIHAR 1 C NEAR ANAND NAGAR 9 B PATIALA 147001 | PATIALA | PUNJAB | 147001 | ₹41.0 L Quoted ₹41.8 L | L1 | Accepted-AOC BEING LOWEST |
| 2 | L2₹42.2 LRejected-Finance 544 STREET NO 10 GHUMMAN NAGAR PATIALA 147001 PB | PATIALA | PATIALA | PUNJAB | 147001 | ₹42.2 L | L2 | Rejected-Finance NOT BEING LOWEST |
| 3 | L3₹42.6 LRejected-Finance | ₹42.6 L | L3 | Rejected-Finance NOT BEING LOWEST |
| 4 | L4₹42.6 LRejected-Finance 68 NEW OFFICER S COLONY PATIALA 147002 PUNJAB | PATIALA | PATIALA | PUNJAB | 147002 | ₹42.6 L | L4 | Rejected-Finance NOT BEING LOWEST |
| 5 | L5₹42.8 LRejected-Finance | ₹42.8 L | L5 | Rejected-Finance NOT BEING LOWEST |
| Sl No | Description | Qty | Unit | Arneja Builders L1 | M/S RAJ KUMAR GUPTA L9 | m/s panchmukhi builders L5 | AR CONSTRUCTIONS L3 | DELTA CONSTRUCTION CO L7 | Buttar Construction Co. L6 | FAVOURITE ENGINEERS L2 | Jawandha Enterprises L8 | ANIL KUMAR AND CO L4 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed. | 3,610 | Sqm | 20 ₹72,200 | 25 ₹90,250 | 22 ₹79,420 | 20 ₹72,200 | 40 ₹1.4 L | 15 ₹54,150 | 10 ₹36,100 | 35 ₹1.3 L | 10 ₹36,100 |
| 2.00 | M&L for cement plastering 10mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. | 180 | Sqm | 230 ₹41,400 | 195 ₹35,100 | 225 ₹40,500 | 220 ₹39,600 | 220 ₹39,600 | 250 ₹45,000 | 190 ₹34,200 | 230 ₹41,400 | 200 ₹36,000 |
| 3.00 | M&L for cement plastering 15mm thick in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished Fair and even without using extra cement and with or without fixing of chicken wire gauge where directed complete all as specified and directed.
Note : WPC and chicken wire gauge will be measured and paid separately. | 1,810 | Sqm | 250 ₹4.5 L | 205 ₹3.7 L | 240 ₹4.3 L | 250 ₹4.5 L | 300 ₹5.4 L | 250 ₹4.5 L | 220 ₹4.0 L | 250 ₹4.5 L | 250 ₹4.5 L |
| 4.00 | Supply only integral liquid water proofing compound complete all as specified and directed.
Make : Pidilite/Sika | 66.97 | Ltrs | 150 ₹10,045.50 | 150 ₹10,045.50 | 120 ₹8,036.40 | 120 ₹8,036.40 | 120 ₹8,036.40 | 80 ₹5,357.60 | 150 ₹10,045.50 | 100 ₹6,697 | 50 ₹3,348.50 |
| 5.00 | Supply only chicken wire mesh 22 gauge of size not less than 20X20mm complete all as specified and directed. | 27 | Sqm | 200 ₹5,400 | 500 ₹13,500 | 300 ₹8,100 | 400 ₹10,800 | 300 ₹8,100 | 200 ₹5,400 | 250 ₹6,750 | 300 ₹8,100 | 250 ₹6,750 |
| 6.00 | M&L for cement plastering 10 mm thick in cemet mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. | 110 | Sqm | 270 ₹29,700 | 180 ₹19,800 | 220 ₹24,200 | 200 ₹22,000 | 200 ₹22,000 | 250 ₹27,500 | 200 ₹22,000 | 225 ₹24,750 | 200 ₹22,000 |
| 7.00 | Complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projections etc by scraping with mechanical sanders (having mechanical vaccum mechanism) with mechanical means/grinder complete all as specified and directed. | 461.64 | Sqm | 10 ₹4,616.40 | 25 ₹11,541 | 12 ₹5,539.68 | 30 ₹13,849.20 | 35 ₹16,157.40 | 10 ₹4,616.40 | 20 ₹9,232.80 | 25 ₹11,541 | 5 ₹2,308.20 |
| 8.00 | M&L for applying acrylic thick wall care putty on internal/external surfaces of walls/ceilings/soffits (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed. | 1,260 | Sqm | 35 ₹44,100 | 35 ₹44,100 | 35 ₹44,100 | 60 ₹75,600 | 45 ₹56,700 | 25 ₹31,500 | 25 ₹31,500 | 50 ₹63,000 | 30 ₹37,800 |
| 9.00 | Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm and making good to disturbed surfaces complete all as specified and directed. | 12 | Each | 200 ₹2,400 | 400 ₹4,800 | 200 ₹2,400 | 70 ₹840 | 600 ₹7,200 | 150 ₹1,800 | 200 ₹2,400 | 800 ₹9,600 | 200 ₹2,400 |
| 10.00 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm and making good to disturbed surfaces reqd shape complete all as specified and directed. | 28 | Each | 200 ₹5,600 | 400 ₹11,200 | 200 ₹5,600 | 80 ₹2,240 | 700 ₹19,600 | 150 ₹4,200 | 250 ₹7,000 | 800 ₹22,400 | 250 ₹7,000 |
Tender Value
Refer Docs
EMD Value
₹76,800
Closing Date
24 Nov 2025, 6:00 pmClosed
MAJ MOHAMMED AQIL AZEEM
GE NORTH PATIALA MILITARY ENGINEER SERVICES SANGRUR ROAD PATIALA CANTT
SPECIAL REPAIR TO BAFFLE RANGE (INCL. ADM BUILDING) AT DHABLAN
2025_MES_738056_1
GE (N)/TOKEN-71/2025-2026
Open Tender
Civil Works
180 days
PATIALA
AS PER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE N PATIALA
₹76,800
Yes
7 Jan 2026
1 Nov 2025
26 Nov 2025
1 Nov 2025
24 Nov 2025
17 Nov 2025
Amount
Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.
M&L for cement plastering 10mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for cement plastering 15mm thick in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished Fair and even without using extra cement and with or without fixing of chicken wire gauge where directed complete all as specified and directed. Note : WPC and chicken wire gauge will be measured and paid separately.
Supply only integral liquid water proofing compound complete all as specified and directed. Make : Pidilite/Sika
Supply only chicken wire mesh 22 gauge of size not less than 20X20mm complete all as specified and directed.
M&L for cement plastering 10 mm thick in cemet mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projections etc by scraping with mechanical sanders (having mechanical vaccum mechanism) with mechanical means/grinder complete all as specified and directed.
M&L for applying acrylic thick wall care putty on internal/external surfaces of walls/ceilings/soffits (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed.
Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm and making good to disturbed surfaces complete all as specified and directed.
Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm and making good to disturbed surfaces reqd shape complete all as specified and directed.
S&F factory made shop coat painted Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate, hold fast etc., complete all as specified, size 105 x 60mm and incl cutting holes and making good disturbed surfaces reqd shape for hold fast block for new frame incl cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in holdfast blocks/ filling in chowkats complete all as specified and directed. complete all as specified and directed.
S&F factory made shop coat painted Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate, hold fast etc., complete all as specified, size 125 x 60mm and incl cutting holes and making good disturbed surfaces reqd shape for hold fast block for new frameincl cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in holdfast blocks/ filling in chowkats complete all as specified and directed.complete all as specified and directed.
S&F factory made flush shutters 35mm thick minimum 5 ply, solid core construction, with block board core and plywood face panels, commercial type on both sides with 6mm thick lipping frame to match complete all as specified and directed
S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.36mm) and complete all as specified and as directed by Enigneer-in-Charge
S&F Aluminium anodised tower bolt of 200mm extruded section and fixed all as specified and directed
S&F Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm complete all as specified and directed
S&F Stainless Steel (304 Grade) Finished Handles 200 mm complete all as specified and directed
S&F Stainless Steel (304 Grade) Finished Floor Door Stoopercomplete all as specified and directed
S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
Supply and fixing factory made PVC solid door frame of size 50 mm x 47 mm with wall thickness of 5 mm thick but single side prelem pvc sheet instead of plain colour pvc sheet and edges will be painted to match with prelam sheet , complete all as specified and directed.
S&F Factory Made PVC Moulded Door Shutter with wood free EPS 28 to 30mm thick (style) with 2,4,6 raised penal design with 2 mm thick moulded PVC sheet on the front face and 2mm plain colour pvc sheet on back face ,supplying and fixing in frame at site as per specification complete all as specified and directed
S&F Aluminium anodised tower bolt of 150mm extruded section and fixed all as specified and directed
S&F Stainless Steel (304 Grade) Finished Handles 150 mm - 2 Nos per leaf complete all as specified and directed
M&L Steel windows or ventilators, fixed type, with glazing bars complete all as specified and as directed by Enigneer-in-Charge
M & L for preparing new wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
S&F stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets/finials fency type, stops fixed with ss screws etc all as specified & directed as in repair . Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered.
Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing serviceable tiles to store & rubbish off the premises
Non skid ceramic joint free (with rectified edges), Non Skid/ Matt superior finish grade B-II (a), floor tiles 7-8mm thick and area exceeding 0.11 sqm but not exceeding 0.18 sqm, coloured as in flooring etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile including 15mm thick screed layer in CM 1:4 over complete all as specified.
Providing and Laying Premium (1st) quality digitally printed straight edge, punched, glazed ceramic rectangle tile in approved shade and finish with flexural strength greater than 16 N/mm2, scratch hardness on Moh’s Scale minimum 3 and crazing resistance of 2 cycles in coloured tiles 450 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. Note : Dado should be flushed with the wall plastering.
M&L Black colour Granite 20 mm thick (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like including 10 mm thick rendering in CM (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including rounding, molding and polishing on edges complete all as specified and as directed.
M&L for machine cut kota stone slab as in flooring of size 580 x 580 mm each & 20-25 mm thick, set and jointed in cement slurry including border of 100mm wide baroda green/white mable as per pattern approved over & including screed of 15 mm thick in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified. Note : 1. All the edges of slabs shall be grinded/cutted at the right angle before laying, so that paper thin, smooth jointing to be obtained. 2. The colour of the slabs shall be uniform.
M&L for machine cut kota stone slab as in skirting of 20-25 mm thick, set and jointed in cement slurry over & including screed of 10 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified .
S&F vitreous china premium/1st quality wall hung wash basin half pedestal, white, flat back, min. size 500x400 mm , screws & plug and brackets etc. all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling half thread incl pvc pipe 40mm upto floor trap incl pvc connection ,and angle cock and also incl CP brass wash basin mixer and complete in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified.
S&F vitreous china premium/1st quality wash down water closet pan (pedestal pattern/EWC) S/P trap white colour of size 520X360X390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and incl. S&F plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including and taking down existing of any description/size complete in all respect all as specified.
S&F in repair flushing cistern of PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, , low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified.
S&F PTMT Jet Spray with 1.5 metre long flexible tube including making connections and fixed in position complete in all respect as specified.
S&F 6mm thick looking mirror beveled edge fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish, etc.complete fixed in position all as specified and directed.
S&F PTMT 450mm long shelf for wash basin. Fixed in position complete in all respect all as specified.
S&F sheet glass shelf assembly consisting of 8mm thick glass shelf 300 x 300mm as in corners wide with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified and directed.
S&F overhead shower 120mm dia with 225-230mm long brass shower arm with wall flange and incl all necessary accessories as recommended by manufacturer for fixing complete in all respect all as specified.
S&F Bib taps, CP, fency type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified.
S&F central hole brass chromium plated basin mixer 15 mm bore with regular spout with/without popup waste system with 450 mm long braided hoses complete all as specified and as directed.
M&L for wall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, non telephonic shower arrangement, with connecting legs & wall flanges, inlets suitable for 15mm bore connections complete all as specified and directed.
S&F Sink Cock wall mounted with swinging spout and with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed.
S&F Concealed Stop Cock, fancy type, CP with long shank and cup, exposed part kit with wall flange, fitting sleeve, operating lever, adjustable wall flange and including regular brass body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified.
S&F Angular Stop Cock, CP, fency type with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified. M
S&F stainless steel sink with drainage board, AISI 304 quality grade, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling/round strainer of 110mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 914mm x460X203mm with bowl size 405x 354x203 and making good disturbed portion in CM 1:3 or PCC 1:2:4 as directed.
S&F in repair towel rod CP 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete all as specified.
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as directed and specified.
S&F cockroach trap gratings AISI-304 of size 150X150mm square in shape with 5mm border complete in all respect all as specified.
Taking up or down existing steel tubing and connections, 15mm bore complete all as directed and specified.
S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as directed and specified.
Taking up or down existing steel tubing and connections, 20mm bore complete all as directed and specified.
S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as directed and specified.
Refixing 20mm bore GI steel water tubing medium grade fixed to walls complete all as specified.
Dismentling of of PVC water srorage tank of of 500 to 1000 ltrs capacity as located on terrace of the building all as specified and directed.
S&F ISI marked doubled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 1000 Ltrs capacity hoisted and fixed in position all as specified including 20 mm dia brass float valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC water tank complete all as specified and directed.
S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.
Plain cement concrete 1:7:12 mix, type F-2 (using 40mm graded Brick aggregate) as in filling of sunken portion complete all as specified and directed.
Rendering 15 mm thick in cement mortar 1:3 , mixed with water proofing compound, on brick or concrete surfaces of wall of sunken portion, trowelled to even and smooth finish without using extra cement with WPC paid and measered sepretly complete all as specified.
Applying three coats of brush bond acrylic based cementitious material of approved quality by engineer-in-charge for sunken portion treatment all as per manufacturer instruction and providing 200 micron thick polythene film over 85/25 grade bitumen layer @ 0.5 kg /Sqm complete all as specified and as directed.
Providing 25 mm dia GI pipe medium grade spouts 60 cm long complete all as specified and directed.
PVC(HDPE) SWR , 40 mm bore, single socketed in any length with rubber ring joints using solvent cement as per maunfacture instruction,including all fitting elbow, tees, sockets, bends etc. laid in walls & floors for connecting bottle traps & nahani trap complete all as specified and as directed.
M&L cast iron multifloor/floor/nahani trap 100 mm dia and 450 to 600 mm long including jointing with solvent cement in repair complete all as specified and directed.
S&F Cast iron soil, waste and vent pipe,100mm bore, sand cast in any length, with or without ears, with lead joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections, fixed as in repair complete all as specified and directed.
Taking down of existing CI pipe 100 mm bore and refixing the same after cleaning and painting with 2 coats of synthetic enamel paint in any position complete all as specified and directed.
S&F 100 mm cast iron spun pipe in any length with or without ears laid in floor incl dismantling of old pipe and excavation of trenches, refilling and leveling of surface complete all as specified and directed.
S&F Cast iron bends duck foot or heelrest, radius for 100 mm bore pipe, as in repairs, complete all as specified and directed.
S&F cast iron 4 way junction for 100mm bore with access door as in repair complete all as specified.
S&F cast iron junction combination 'T' equal or unequal for 100mm bore with access door as in repair complete all as specified.
S&F CI Bends (any radius), for 100mm bore CI piipes complete all as specified.
S&F 100mm bore Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified.
M&L for cast iron cowls of 100 mm dia complete all as specified and directed.
S&F SGSW gully traps, Centrifugal type 150 x 150mm size , square or roundmouthed, type 'P' or 'S' fixed in repair complete all as directed and specified.
Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified.
Demolition of mud phuska on roof any thickness all as directed.
Roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified.
PCC 1:3:6, type B-0 using 12.5mm graded stone aggregates as in padding over roof, minimum thickness at khurra as 25mm to maintain a slope of 1:100 ,complete all as specified and directed.
Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified.
Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 4.0 Kg/Sqm water proofing membrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm th 5 layered APP membrane shall be laid using butane torch and sealling all joints etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength inlongitueinal and transverse direction at 23 degree C as 650/450N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 250 N/. Softening point of membrane not less than 150 degree C Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147) (iii) The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed.
PCC plain factory made tiles ISI marked cement concrete tiles of size 250x250x20-22mm thick machine pressed set joined and pointed in neat cement slury in floor and cut and polished with grey cement and no pigment over 15mm thick cement mortar (1:3) bedding and joints grouted flish in cement mortar (1:3) mixed with integral water proofing compound over roof surface complete all as specified and as directed
M&L Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean raidus bulit in C:M 1:6 all as specified.
M&L Cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and smooth without using extra cement as in plinth protection including provision of construction joints and form work complete all as directed by Engr-in-Charge and complete as specified.
PCC 1:2:4 type B-2 using 40mm graded stone aggretgate, as in base for PVC tanks complete all as specified and directed.
M&L Preparation of old steel surfaces of any description, over 10 cm width or girth and applying ONE coat of synthetic enamel paint complete all as specified
M&L Preparation of ceiling surfaces and applying three coats of lime white wash on ceiling surfaces etc., complete all as specified.
M&L Preparation of plastered or unplastered surfaces of walls etc., and applying two coat of distemper oil emulsion (OBD) over a coat of chalk whiting (as primer) complete all as specified and as directed.
Applying 02 coats of exterior emulsion paint by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer as recommended for under coat by manufacturer of exterior emulsion complete all as specified and directed.
M&L Earth filling under floors or in foundations including watering and consolidation. complete all as specified and directed.
Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified.
Applying 02 coats of cement paint by using roller to wall surfaces over & including a coat of exterior wall primer as recommended for under coat by manufacturer complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer-in-Charge. NOTE :- The rates incl scaffolding/ladders etc as required up to 12 m bldg height, not paid separatly.
Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge. NOTE :- The rates incl scaffolding/ladders etc as required up to 12 m bldg height, not paid separatly.
M&L for reinforced cement concrete M-25 using 20mm graded stone aggregates as in Fins,fascia,louvres,paraprts,and railings exc. 60cm in height ,newels,balustrade,and the likecomplete all as specified and as directed by Engineer-in-Charge. NOTE :- The rates incl scaffolding/ladders etc as required up to 12 m bldg height, not paid separatly.
Formwork to fins,louvers,fasciacomplete all as specified and as directed by Engineer-in-Charge. NOTE :- The rates incl scaffolding/ladders etc as required up to 12 m bldg height, not paid separatly.
Formwork to edges of concrete flats,treads,breaks in floors, window cills,concrete raillings opening in concrete walls,floors and rofs n exc 20cm wide and sides of RCC/PCC bands in walls ,horizontal or slopping and similar work exc 10cm but n exc 20cm complete all as specified and as directed by Engineer-in-Charge. NOTE :- The rates incl scaffolding/ladders etc as required up to 12 m bldg height, not paid separatly.
Demolition old plain/ barbed wire as in fencing of any description and in any position any dia complete all as specified and as directed.
Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)
Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface. complete all as specified and directed
M&L for Continuous Kerb Stone edging with pre-cast cement conrete ( 1:2:4) type B-I using 20 mm graded aggregate ( Size of kerb stone 300x100x450mm), with plain fair faces with or without chamfered edge laid on end vertically and set in cm (1:4) complete all as specified and directed.
Material & Labour for 75 mm thick PCC type C-2, (1:3:6) using 40mm graded stone agrregate as in sub base of floors etc complete all as specified and directed by Engr-in-Charge
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete. complete all as specified and directed by Engr-in-Charge
Material and labour for PCC 1:2:4(type B-0) as, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed. complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil complete all as specified and directed.
M&L PCC in foundations, filling and mass-concrete type C2 (1:3:6) using 40 mm graded stone aggregate as in filling in fdn of post holes comlete all as as specified and directed.
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240. complete all as as specified and directed.
S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment along with the necessary required welding, along with the cleats complete all as as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified. complete all as specified and directed
Taking down carefully existing points wiring on surface conduit/concealed conduit including conduit from surface and expect conduit in concealed wiring for light/fan/socket/power/bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, pieces of wires, gutties, conduit, wooden boards etc removing materials to store for keeping in safe custody of contractor for which the credit has been considered under schedule of credit and making good the disturbed portion of all floor, ceiling etc all as specified and directed.
Point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper conductor for one light/fan/bell in new PVC conduit to be terminated in pressed steel terminal boxes with top cover plate including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed by Engineer in-charge Note-I-(Switches and regulators shall be measured and paid for separately). Note-II- ( Wiring shall be done as per colour code in IS for phase, neutral and earth). Note-III- (The cost of modular cover plate and metal flush boxes is deemed to be included in the unit rate quoted for this item). Note -IV - cost of Eye/bottle thimbles used for connection in switches/sockets & MCBs in DBs is deemed to be included in the unit rate quoted for this item. Note:- V- Rate of cutting chasing included in the unit rate quoted for this item
All as per Sl item No 111.00 above herein before but one socket out let 5 pins 5 Amp on the same board with other switches complete all as specified and directed.
All as per Sl item No 111.00 above herein before but for one socket out let 5 pins 5 Amp on independent board complete all as specified and directed.
All as per item No.111.00 herein before but 2.5 Sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor incl 2.5 Sqmm PVC insulated and unsheathed FRLSH copper earth wire for switch socket combination 3 pin 15 amps on independent board.
Modular switch 1 way, 6 Amps, 1 module, 230 volts complete all as specified.
Modular switch 1 way, 16 Amps, 1 module, 230 volts complete all as specified.
Modular socket 5 pin 6 Amps, 2 module 230 volts complete all as specified.
Modular socket 5 pin 6 &16 Amps, combination type 2 module complete all as specified.
Modular Fan regulator step type, 120 watts, 2 module complete fixed as in repair all as specified.
S&F ceiling rose surface bakelite surface 65 x 50mm 3 terminals all as specified & directed
New generation energy saving and environmental friendly long life LED building security light 1x25 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable bracket with 32mm bore light grade GI pipe bemd to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twincore from ceiling rose to light fittings complete all as specified and directed by Engineer-in-charge.
M & L for Sub main wiring with two single core 6.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 6.0 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2(two) Runs of 6.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 6.00 Sqmm Copper conductor Earth wire shall be measured as one unit) Note 2 :(i) Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces and cutting not exc. 10 cm girth . (iii) Including taking out/down existing unserviceable sub main wiring.
M & L for Sub main wiring with two single core 4.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 4 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2 Runs of 4.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 4.00 Sqmm Copper conductor Earth wire shall be measured as one unit) Note2 : Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces, cutting not exc. 10 cm girth . (iii) Taking out/down existing unserviceable sub main wiring.
MCCB, 4 Pole, 100 A, 25 KA for fixing in DB including proper thimble connection, thermal and magnetic release protection complete all as specified and directed by Engineer-in-charge.
Supply and fix epoxy power coated MCCB distribution box double door VTPN 4 way vertical type AC 415 V with IP 54 protection for MCBs alongwith provision of MCCB as incomer with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall, complete all as specified by Engineer-in-charge. (Note :- MCCB will be measured and paid under seperate item) (i) Cost of Eye/bottle thimbles used for connection MCBs in DBs shall deemed to be included in unit rate quoted for this items, (ii) Electric wiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth. (iii) connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped. all the vacant holes of the DB shall be provided with blank plates of appropriate size. (iv) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly with digre of protection IP 54 & PU gasket a machenical perfact IK O9.
Supply and fix Sheet metal enclosure 8 ways double door for DBs when MCBs are to be used 240,volts including 200 Amps standard bus bar of suitable size and common neutral link all flush mounting type, drilling holes for incoming and out going cables with IP54 protection complete all as specified & directed by Engr-in-charge.
Supply and fix MCB , SPN, 240 Volts ,32-40 amp for fixing in DBs of including proper thimble connections complete all as specified and directed by Engineer-in-Charge.
Supply and fix MCB, single pole 240 volts 6 to 32 Amp capacity for fixing in DB’s including proper thimble connections complete all as specified and directed by Engineer-in-Charge.
M & L for Earthing complete with galvanized iron earth plate electrode of size 600x600x6.0mm , buried directly in ground (earth pit not less than 2.25 mtrs below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts , nuts , check nuts and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate 20 mm dia watering pipe medium grade 1.70 mtr long with a plug at top, GI protection pipe light grade 15 mm dia from earth pit to main board including PCC pit in cement concrete 1:2:4 along with CI frame and cover 10mm thick duly hinged to CI frame as shown in the electrical plate No3 of SSR 2009 part 1 specification at page 497.
Supply and fix Tube light fitting Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in square LED Batten 18/20W 6500K of capacity ,20 watt,4 ft long incl 3 core flexible wire 0.5 sqmm copper cable all as specified and directed by Engr-in-charge.
Supply and fix in replacement of elegatly designed sleek surface mounted pressure die-cast aluminium LED luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver of capacity 20 W LED of 5000 K and making good the existing surface as per existing complete all as specified & directed.
Taking down and refixing of ceiling fanafter necessary cleaning painting making serial No complete all as specified and directed by Enginner-in-charge.
Supply and fix Exhaust fan AC single phase 230/240 v of size 300 mm sweep 900 rpm Engineering thermoplastic body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including Louver complete all as specified and directed by Engineer-in-Charge.
Material and labour for making hole of suitable size for exhaust fan 300/450 mm sweep in wall including grouting and making good the surface complete all as specified and directed by Engr-in-charge. Note: Cost of plastering,painting & cement work is included in this rate.
Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, complete all as specified and as directed by Engineer-in-charge.
XLPE Insulated ,screened, PVC bedded, galvanized steel wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core supplied & laid in replacement complete all as specified& directed by Engineer-in-Charge.
Supply and fix Exhaust fan AC single phase 230/240 v of size 450 mm sweep heavy duty 1400 rpm metal body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including Louver complete all as specified and directed by Engineer-in-Charge.
FAVOURITE ENGINEERS (BID ID -3480687)
AR CONSTRUCTIONS (BID ID -3480295)
ANIL KUMAR AND CO (BID ID -3480387)
m/s panchmukhi builders (BID ID -3480277)
Buttar Construction Co. (BID ID -3480680)
DELTA CONSTRUCTION CO (BID ID -3480651)
Jawandha Enterprises (BID ID -3481556)
M/S RAJ KUMAR GUPTA (BID ID -3478414)
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.79 MB
TENDERDOCUMENTS.pdf
Tender Documents • 2.06 MB
BOQ_826422.xls
BOQ • 0.44 MB
Download all tender documents and submit your bid