REPAIR RENEWAL MAINT OF INTERNAL ELECTRIFICATION AND SUMMER AND WINTER APPLIANCES AT BAGRAKOTE MIL STN UNDER GE SEVOKE ROAD

Amount

Taking down carefully old unserviciable copper /aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures, removing materials to store for keeping in safe custody or for taking credit all as directed making good disturbed surfaces of walls with putty, cement and matching the colour of the surface as per existing.

M&L for concealed point wiring with two single core PVC insulated, FRLSH unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated FRLSH unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead in and including PVC rigid conduit (medium grade) with all fittings & accessories including provn of MS sunk terminal box of appropriate size suitable for flush to wall for mounting switch, sockets, fan regulators etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / call bell complete. . Note: Cost of making good the disturbed surfaces (if any) & matching with the existing surface is deemed to be included in the unit quoted rates.

All as per Item Sl No - 02 here in before but for one light point controlled by two 2 way switches complete

All as per Item Sl No - 02 here in before but for 5 pin, 5/6 A socket point on the independent board complete.

All as per Item Sl No - 02 here in before but for 5 pin, 5/6 A socket point on the same board complete.

All as per Item Sl No - 02 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 2.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 2.5 sqmm green in colour as earth lead for 15/16 A switch-socket point on independent board complete.

M&L for wiring in existing conduit with two single core PVC insulated, unsheathed, multistranded copper conductor FRLSH of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor FRLSH of size 1.50 sqmm green in colour as earth lead in and including provn of MS sunk terminal box of appropriate size suitable for flush to wall for mounting switch, sockets, fan regulators etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / call bell complete all as specified and directed by Eng-in-charge...

M&L for point wiring with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead in and including PVC rigid casing caping (medium grade) with all fittings & accessories including provn of MS sunk terminal box of minimum size 75 x75 mm fixed flush to wall for mounting switch, socket, fan regulator etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / complete.. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates.

All as per Item Sl No - 08 here in before but for 5 pin, 5/6 A socket point on the independent board complete.

All as per Item Sl No - 08 here in before but for 5 pin, 5/6 A socket point on the same board complete.

All as per Item Sl No - 08 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 2.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 2.5sqmm green in colour as earth lead for 15/16 A switch-socket point on independent board complete.

S & F switch piano flush type single, pole one way, 5 Amp.

S&F ceiling rose, surface bakelite 3/2 terminals.

S & F switch socket combination 5 in 1, 5/6A.

S & F switch socket combination 5 in 1, 15/16A.

S & F socket outlet 5 in 1,5A.

S & F Bell push flush type 5 amp, 240 volts.

S & F Bell Ding Dong AC , 230 volts single pole.

S&F electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200/1400mm sweep, 120 Watt.

Taking down existing unservisiable FTL light fitting and S&F in repair decorative box type fitting with LED retrofit tube 9 watt 2 feet with Aluminium extruded batten luminaire for 230 volt AC complete all as directed by Engineer in Charge

Taking down existing unserviceable FTL light fitting and S&F in repair decorative box type fitting with LED retrofit tube18 watt 4 feet Aluminium extruded batten luminaire for 230 volt AC, complete all as directed by Engineer in Charge

S & F energy saving surface mounted round decorative LED luminaries 12 W with PDC Aluminium housing, soft moon light effect produced when in operation complete all as specified and directed.

Taking down existing U/S light fitting and S & F in repair decorative fancy wall light fixture made up of polycarbonate body suitable for 9W, B-22 type lamp luminaire for 230 volt AC including necessery fixing arrangement complete all as specified and directed.

S&F ventilating fan with louvers, single phase, 230/240 V, of size 250 mm sweep polycarbonate body axial flow fan with hidded blades, low noise and weight with thermal overload protection and removable screwless front for easy cleaning including making holes on wall & making good the distrubed surfaces with all connecting arrangements complete all as specified and directed.

Fixing only serviceable light fittings, any type recovered from item no.1 including making necessery end connections with suitable wire all as directed.

S&F MCB, DB, TPN, 4 ways double door, IP-42, IK-09 with metal door, 160 Amp rated bus bars, earth bar, neutral links complete including blanking plates as required & fixed flush to wall and making good the disturbed surfaces including taking down unserviceable one with MCBs complete all as specified and directed.

All as per item No. 26 here in before but SPN 12 way complete all as specified and directed.

All as per item No. 26 here in before but SPN 8 way complete all as specified and directed.

S&F MCB, SP, 10KA, 230V, "C" curve, 06-32 A, ISI Marked complete all as specified and directed.

S&F MCB, DP, 10KA, 415V, "C" curve, 06-32 A, ISI Marked complete all as specified and directed.

S&F MCB, TPN, 10KA, 440V, "C" curve, 40/63 Amp, ISI Marked complete all as specified and directed.

M&L for submain wiring in and including casing caping (medium grade) with two single core PVC insulated, FRLSH unsheathed, stranded copper conductor of size 6.0 Sqmm and one single core PVC insulated, FRLSH unsheathed solid copper conductor 6.0 Sqmm green in colour as earth lead including taking down old unserviceable aluminium sub-main wiring complete all as specified and directed by Eng-in-Charge.

M&L for submain concealed wiring with two single core PVC insulated, FRLSH unsheathed, stranded copper conductor of size 4.0 Sqmm and one single core PVC insulated, FRLSH unsheathed solid copper conductor 4.0 Sqmm green in colour as earth continuity conductor drawn into and including PVC conduit (medium grade) with all fitting & accessories including taking down old unserviceable sub-main wiring complete all as specified.

M&L for submain wiring in existing conduit with two single core PVC insulated, unsheathed, FRLSH stranded copper conductor of size 6.0 Sqmm and one single core PVC insulated, unsheathed solid copper conductor 6.0 Sqmm green in colour as earth lead in existing cancealed PVC conduit with all fitting & accessories incl taking down old unsv aluminium sub-main wiring from existing concealed conduit complete all as specified and directed by Eng-in-Charge

M&L for submain wiring with and including casing caping with two single core PVC insulated, FRLSH unsheathed, stranded copper conductor of size 4.0 Sqmm one single core PVC insulated, FRLSH unsheathed solid copper conductor 4.0 Sqmm and green in colour as earth lead with all fitting & accessories incl taking down old unserviceable aluminium sub-main wiring complete all as specified and directed by Eng-in-Charge.

M&L for earthing complete with galvanized steel earth plate electrode 600x600x 6mm burried directly in ground (in vertical position) earth pit not less then 2.25 mtr below normal ground level with the top edge of the earth plate not less than 1.5 mtr (B.G.L) and connected to galvanized iron earth wire of 4mm dia GI wire with GI protection pipe upto pole junction box by means of bolts, nuts, check nuits, and washer of galvanized iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made of 6 mm round bar, including necessary excavation and earth work in any type of soil, 20 mm dia medIum grade galvanized steel tube for watering with one end fixed with cast iron funnel and wire mess, 15mm bore light grade galvanized steel tubing up to 7.5 mtr lenght for drawing earth lead GI wire protection including common salt, charcoal in alternate layers etc. complete all as shown in EP No. 3 of SSR part 1 and testing on completion including taking out old unsv earthing complete all as specified and directed.

All as per item No. 26.00 here in before but SPN 4 Way.

S&F Slim profile surface mounted downlight 6/7W complete all as specified.

Supply and fix LED Bldg Security light luminaries 20 watt,IP65/66 sleek pressure die cast aluminium housing complete high power LED street light with heat resistant glass with lens including fixing arrangements providing bracket complete specified and directed.

Supply and fix LED Security light luminaries 40 watt,IP65/66 sleek pressure die cast aluminium housing complete high power LED street light with heat resistant glass with lens complete specified and directed.

Supply and fixing recess/surface mounting LED ceiling light with fully diffused recessed mounted, 2X2 LED panel 36 watt complete all as specified and directed by the Engr-in-charge,

S&F Led Driver for 2ftX 2Ft Led ceiling Light of suitable for 36 Watt.

S&F Master LEDspot Lamp MV range with complete fixing arrangement all as specified and directed by the Engr-in-charge, .

Supply and fix LED PL-L 18 W 4 Pin complete all as specified and directed.

S&F Adjustable recessed spot light 6W or nearest standard watt for a unique lookin the ceiling.

S&F steel water tubing galvanised medium grade with all GI fittings and fixed complete to wall and in floor 15 mm bore in and including cutting , chases making good for concealed pipe line etc. cutting not exc 10cm girth and making good to match the existing surface complete as specified and as directed.

S&F 15mm bore CP brass angle valve concealed type with capstan head wall flange complete as specified and directed of make as approved by the GE.

S&F CP brass flexible connecting pipe of size 15mm bore for hot water and cold water connection pipe for geyser complete as specified and directed.

Taking down geyser of any capacity horizontal or vertical for repair/over hauling/replacement of unserviceable parts and disconnection of electric/ water supply lines and fixing the geyser in serviceable condition after assembling & reconnecting the electric & water supply line including testing complete as specified and directed. (Note-Spare parts required for replacement shall be measured and paid separately as 'Supply only')

Supply only heating element of geyser 1.5/2 KW any shape "ISI marked" .

Supply only heating element of geyser 2.5/3/4 KW any shape "ISI marked" .

Supply only thermostat for geyser 300mm long ISI marked .

Supply only indicating lamp (Red/Green) any shape for geyser .

M&L for repairing of leakage of inner tank of geyser by brazing including required denting etc. for any type and make & capacity of Geyser complete as specified and directed.

Supply and fixing of water heater (Geyser) 25 Litre capacity, 5 star rating, vertical type of any make including inlet and out let water connection, electric connection including supply and fixing bolts and nuts of required size-04 Nos duly grouted on wall and making good of disturbed surface as per existing including writing MES No with synthetic enamel paint on Geyser complete as specified and directed.

All as per item No. 55.00 but 35 litre capacity.

S&F gun metal gate valve 15 mm bore complete with both end screwed complete as specified and directed.

S&F gun metal non return valve 15mm bore heavy duty complete as specified and directed.

S&F in repairs GI tube 20mm bore medium grade with and including all GI fittings fixed on walls/floors complete as specified and directed.

Supply & Fixing in replacement of u/s glass wool in any type of geyser complete as specified and directed.

S&F in repair switch 15 amp flush type, AC, 230V complete as specified and directed.

Supply & fix in repair socket outlet flush type 3 pin 15 Amps 240 Volts complete as specified and directed.

Supply & fix PVC plug top of 15 Amp, AC, 240 volt complete as specified and directed.

Supply & fix in repair pressure release valve chromium plated spring type for any make of geyser complete as specified and directed.

Taking down ceiling fan from any location and any height, removing fan blades and carried to workshop for repair/rewinding and refixing the same after repair work complete as specified and directed. Note- The work for repair/rewinding etc will be measured and paid separately.

All as per item No 65.00 but exhaust fan.

All as per item No 65.00 but wall mounted fan.

M&L for over hauling and servicing of ceiling fan of any size and model including oiling, greasing cleaning and replacement of split pin rubber reel, clamp, check nuts, flexible cord of size 3 core of suitable size complete as specified and directed. Note-Spare parts required for replacement shall be measured and paid separately as supply only.

All as per item No 68.00 but exhaust fan.

All as per item No 68.00 but wall mounted fan.

M&L for rewinding of ceiling fan of size 1200mm sweep with super enamelled copper winding wire of existing gauge, insulated materials etc, reassembling the same of any make or model and testing complete as specified and directed.

M&L for rewinding of ceiling fan of size 1400/1500mm sweep with super enamelled copper winding wire of existing gauge, insulated materials etc, reassembling the same of any make or model and testing complete as specified and directed.

M&L for rewinding of exhaust fan of size upto 300mm sweep with super enamelled copper winding wire of existing gauge, insulated materials etc, reassembling the same of any make or model and testing complete as specified and directed.

M&L for rewinding of exhaust fan of size 380 and 450mm sweep with super enamelled copper winding wire of existing gauge, insulated materials etc, reassembling the same of any make or model and testing complete as specified and directed.

M&L for rewinding of wall mounted fan of size upto 600mm sweep with super enamelled copper winding wire of existing gauge, insulated materials etc, reassembling the same of any make or model and testing complete as specified and directed.

M&L for painting of ceiling fan with synthetic enamelled paint by spray painting machine including filling cavities with filler one coat after cleaning all dust etc including writing of MES No complete as specified and directed.

All as per item No 76.00 but exhaust fan.

Supply and fixing heavy duty exhaust fan 300mm sweep, IP-55, AC, 230V, 50 HZ including taking down old exhaust fan and deposited to E/M store yard complete as specified and directed. Make:- Havells, Turbo Force (Single Phase) or equivalent model of make given in list of make.

Supply only PVC insulated, PVC sheathed 3 core copper flexible cable round of size 23/.0076 complete as specified and directed.

Supply only ball bearing No 6201 for ceiling fan complete as specified and directed.

Supply only ball bearing No 6304 for exhaust fan complete as specified and directed.

Supply only ball bearing No 6202 for Pedestal Fan complete as specified and directed.

Supply only capacitor 2.5 mfd complete as specified and directed.

Supply only capacitor 4 mfd complete as specified and directed.

Supply only canopy ( Top & bottom) as per sample for ceiling fan complete as specified and directed.

Supply only Gun metal bush for ceiling fan/Pedestal/Air Circulator/Wall fan etc complete as specified and directed.

M&L ceiling fan down rod made out of GI pipe, light grade, 15mm bore and 1.20 meter long including rubber real and suitable nuts and bolts, safety pin complete as specified and directed.

Dismantling the outdoor and indoor unit of Split Type air conditioner 1.5 ton capacity after removing refrigerant pipe connection, electric wire connection for the following repair/replacement works & servicing of machine complete all as specified and directed. (a) Repair of the suction and discharge tube and cooling coil and replacement of heat resistive thermocol tube gas & liquid line as required. (b) De-scaling the complete refrigeration system with carbon tetra chloride, replacement of defective capillary tube, strainer and drier of required size assembling the system, leakage test of the system by applying approximate head and vacuum up to (-) 75 cm coloumn of mercury. © Supply & recharging of gas with refrigerant F-22 or M-22 as required and testing the cooling effect satisfactorily on full load after re-installation of A/C all as directed. Note : Spare parts required in replacement will be measured and paid under respective items.

All as per item No 88.00 but for 2 TR capacity.

All as per item No 88.00 but window type 1.5TR capacity.

Servicing of following type of air conditioner 1.5/2.0 ton capacity after removing electric wire connection & cleaning of Cooling coil, Filter , replacement of any U/S minor parts such as relay, capacitor, Nobs etc. complete all as specified and directed. Note : Spare parts required in replacement will be measured and paid under respective items.

1.5/2.0 TR split type A/C

1.5/2.0 TR Window type A/C

Dismantling 40 Ltrs cooling capacity 80 Ltrs storage type water cooler by cutting of refrigerant pipe, removing sealed unit compressor and blower motor/refrigeration system for the following repair/replacement work complete all as specified and directed:- Note:-(a) Sealed compressor 1/3 HP capacity including sealing of the compressor with welding after assembling. (b) De-scaling of refrigeration system with carbon tetra chloride, replacement of the chocked capillary tubes, strainer and dryer of required size complete all as directed. (c) Cleaning and lubrication of blower motor and replacement of unserviceable bushing of shaft and assembling complete. (d) Reassembling all the components of water cooler in proper position including charging of refrigerant gas F-12 as required, Leak testing of complete refrigeration system and testing the water cooler with cooling effects after installation in original position as directed. (e) Painting of water cooler with one coat of DUCO paint after necessary surface preparation with spray painting all as directed. Note : Spare parts required in replacement will be measured and paid under respective items.

All as per item No.94.00 but for water cooler 120 ltrs.

All as per item No.94.00 but for water cooler 150 ltrs.

M&L in replacement of old u/s of following defective components/parts of split /window type AC 1.5/2 Ton capacity/ water cooler 150 ltr capacity/refrigerators 165 ltr to 345 ltr capacity and refixing the same at its original location complete testing complete all as specified and directed

Compressor for Split/Window type AC 1.5 Ton Capacity rotary type.

Compressor for Split/Window type AC-2 Ton Capacity rotary type.

Compressor for 165/200 ltrs capacity refrigerator rotary type .

Compressor for 210 to 300 Ltrs capacity refrigerator rotary type.

Compressor for 40 Ltrs water cooler.

Running capacitor 4 mfd.

Running capacitor 36 mfd.

Running capacitor of 80/100 mfd .

Starting capacitor of 80/100 mfd.

Starting relay 1622

Starting relay 1022

Overload protector relay 1622.

Overload protector relay 1022.

Copper wire wiring set for window/split type A/C

M&L for PVC flexible 3 core 4 Sq mm copper cable suitable for window/split type A/C .

Supply and fix in replacement of remote circuit complete with remote device for 1.5/2.0 TR window/Split type A/C and complete testing as per existing as directed.

M&L for charging of refrigerant gas (R-134A) or any other grade as required AC/refrigerator.

S&F Centrifugal Mist Fan of 650mm sweep of 220-240 volts 50 Hz single phase, Tank capacity 41L maximum mist volume 5L/H

Repair of old defective voltage stablizer by repair Transformer/ relay/ electronic circuitry and repair the loose connection,by providing skilled electrician complete all as specified and directed

M/s. STRUCTURES INDIA

SHRI JIBANDHAN PAUL