Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.0 LAccepted-AOC | L1 | Accepted-AOC LOWEST TENDERER. | |
| 2 | L2₹7.1 L+₹10,340 (1.48%)Rejected-AOC | L2 | Rejected-AOC NOT LOWEST TENDERER. |
| Sl No | Description | Qty | Unit | M/s Ashwin Bhange L2 | M/s S. S. MUNDE L1 |
|---|---|---|---|---|---|
| 1.00 | Excavation in trenches n.exc 1.50 M wide & n.exc 1.50 M deep for foundation etc or for shafts wells cesspits, manhole pier holes etc n exc 10 sqm on plan and n exc 1.5 m depth and getting in hard/dense soil complete all as specified and directed. | 10 | CUBIC METRE | 280 ₹2,800 Lowest | 400 ₹4,000 |
| 2.00 | Excavating in post holes (or similar holes) each in hard/dense n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed. | 44 | EACH | 120 ₹5,280 Lowest | 200 ₹8,800 |
| 3.00 | Material & Labour cement concrete (1:3:6) type C2 (40mm graded) in foundation filling and mass concreting. | 10 | CUBIC METRE | 3,700 ₹37,000 Lowest | 4,500 ₹45,000 |
| 4.00 | Material & Labour RCC (Nominal mix) Type B1 1:2:4 (using 20 mm graded crushed stone aggregate) for foundation including rafts footing, foundation beams, plinth beams, bases for columns etc basement slab,under reamed piles and mass concrete complete all as specified and directed | 4 | CUBIC METRE | 4,500 ₹18,000 Lowest | 6,000 ₹24,000 |
| 5.00 | Material & Labour RCC (Nominal mix) Type B1 1:2:4 (using 20 mm graded crushed stone aggregate) for Columns, pillars, piers, posts and struts complete all as specified and directed. | 3.5 | CUBIC METRE | 5,000 ₹17,500 Lowest | 6,200 ₹21,700 |
| 6.00 | Material & Labour for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter fair finished surfaces complete all as specified and directed. | 18 | SQUARE METRE | 350 ₹6,300 | 300 ₹5,400 Lowest |
| 7.00 | Material & Labour for formwork to sides of pillars, posts, struts, piers, columns and stanchions fair finished surfaces complete all as specified and directed. | 35 | SQUARE METRE | 380 ₹13,300 Lowest | 380 ₹13,300 Lowest |
| 8.00 | Material & Labour mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia complete all as specified and directed. | 400 | KILOGRAM | 110 ₹44,000 | 100 ₹40,000 Lowest |
| 9.00 | All as per item No 8 above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. | 150 | KILOGRAM | 110 ₹16,500 | 102 ₹15,300 Lowest |
| 10.00 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm for any types of soil complete all as specified and directed. | 4 | CUBIC METRE | 120 ₹480 | 80 ₹320 Lowest |
Tender Value
₹8.1 L
EMD Value
₹16,200
Closing Date
3 Jan 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL RAVI KUMAR PATIYAL, GE
OFFICE OF GARRISON ENGINEER AIR FORCE VAYUSENA NAGAR NAGPUR- 440007
PROVN OF OBSTACLE COURSE AT VSN NAGPUR
2025_MES_744434_1
8786/E8
Open Tender
Civil Works
Item Rate
120 days
GE AF NAGPUR
As per tender documents
7 documents required · 7 mandatory
₹500
GE AF NAGPUR
₹16,200
28 Feb 2026
13 Dec 2025
5 Jan 2026
13 Dec 2025
3 Jan 2026
27 Dec 2025
Material & Labour RCC (Nominal mix) Type B1 1:2:4 (using 20 mm graded crushed stone aggregate) for Columns, pillars, piers, posts and struts complete all as specified and directed.
Material & Labour mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia complete all as specified and directed.
All as per item No 8 above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.
Material & Labour for mild steel work in tubular sections of any type (square, rectangular or circular) as in trusses, post, rafter, purlin, framed work of any type for obstacle course including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 including fixing in position etc complete all as specified and as directed by Engr-in-Charge. Note :- Tubular steel section to be desided by Engr-in-Charge and to be fabricated in factory by the special order if not available in market.
Material & Labour for rolled MS plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with welded attachment with MS angle confirming to Fe 290 (Gde - E-165) complete all as specified and as directed.
Material & Labour for preparing new surfaces of steel of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.14 MB
BOQ_833571.xls
BOQ • 0.44 MB
TENDERDOCS8786.pdf
Tender Documents • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .