Providing and making additional power and data outlets at DOAA Building Wadhwani School

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x 1.5 sq. mm

3 x 2.5 sq. mm

3 x 4 sq. mm

3 x 10 sq.mm.

6 x 16 sq.mm.

Supply and fixing of 32 x 20 mm DLP mini- trunking white-system with independent cover etc. as required complete.

Supply and fixing of following accessories suitable for 32 mm x 20 mm size plastic trunking white system.

End cap

Internal / external angle

Changeable flat angle

Flat junction

Supply and fixing of 105 x 50 mm DLP trunking white-system but without cover and partition etc. as required complete.

Supply and fixing of following accessories suitable for 105 mm x 50 mm size plastic trunking white system.

85 mm flexible cover

End cap

Internal angles- adjustable from 80°-100°

External angles- adjustable from 60°-120°

Flat junction

Flat angles

Separation partitions

Joints for 85mm width cover

Base joints

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

S & F following size of steel flexible pipe along with the accessories on surface etc as required

Supply and fixing of following LED light fixture with efficiency >100 lumen/ watt, P.F. >0.95, THD<10%, Electronic driver, LED lamp, reflector, diffuser, MS body/housing holder etc. complete with all fixing accessories and lamp as required complete.

18 watt recess 300 x 300 mm mounting LED light fixture

18 watt surface mounting 300 x 300 mm LED light fixture

36 watt recess mounting LED light fixture 600 x 600 mm

36 watt recess mounting LED light fixture 300 x 1200 mm

36 watt surface mounting LED light fixture 300 x 1200 mm

Supplying, installation of Clip-on frame with finishing plate for 85mm cover for DLP plastic trunking 105mm x 50mm etc. as reqd.

3 module

6 module

Supplying and fixing following modular switch/ socket on the existing clip-on frame fixed on 85mm cover of 105 x 50 mm DLP plastic trunking including connections etc. as required complete.

6 A switch

20 A switch

6 A pin 2/3 pin socket outlet

6 A pin 2/3 pin socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Blanking Plate

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.

3 Module

6 Module

Supplying and fixing following size/ modules, plastic box for modular switches in recess etc as required.

3 Module

6 Module

Dismantling, disconnecting old damaged unserviceable fl fitting/ exhaust fan/ ceiling fan/ bulkhead fitting with bracket etc. as reqd. and depositing in sectional store.

Dismantling concealed & damaged DB/TPN Switches/starter/ loose wire boxes along with all accessories and depositing the same in the sectional store repairing the damages as reqd complete.

Dismantling the old conduit pipe/wood batten of all sizes from surface/recessed & making good the damages I/c filling the holes of the surface etc as reqd. and depositing it in sectional store.

Fixing 20/25/32 mm conduit pipe/ DLP on surface with clamp/in recessed only conduit pipe supplied by department.(Free of cost)

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/lsolator)

12 way, Double door

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

8 way (4 + 24), Double door

Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole 5 A to 32 A

Single Pole (40A-63A)

Double Pole (40A-63A)

Four Pole (40A-63A)

S&F, Copper tube / reducer/ lug terminals suitable for following size of conductor.

Laying of 1/2/3 run of UTP cable enhanced cat 5/cat 6 cable in existing steel conduit pipe/GI pipe/ raceway / RCC pipe as reqd. the cost shall also include numbering of networking wire from room to rack as reqd. (wire will be supplied by dept)

Fixing of RJ-45 modular box with cover plate or I/o box for internet on surface/ recessed cutting the wall making good the same as required. ( box and cover plate will be supplied by dept.)

Fixing of Network rack on steel fastener including cartage from store to site as reqd complete.

Supplying & fixing 3mm (1/8") thick phenolic laminated sheet on existing board with screw & washer etc. as required.

Overhauling of ceiling fan of any size including dismantling and refixing of fan, bearings, checking, cleaning the all parts and supply & replacement of rubber real, rubber rings, nut bolts, hanger clamps, bearing plates, cotter/ split pin, varnishing if reqd etc, reassembling testing and commissioning of fan as required complete.