CWE/CHM-80/2020-21 PROVN OF TOILET WITH ALLIED WORKS NEAR BLDG NO. P-16 AND SPECIAL REPAIR TO PAVED AREA AND FENCING IN SDS BLDG NO. P-895 AT CHANDIMANDIR MIL STN

Amount

Demolition of Brickwork or stone/boulder masonary, laid dry complete all as specified and directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Excavation over areas, n.exc 1.5m deep and getting out as in hard/ dense soil, complete all as directed by Engr-in-Charge.

M&L excavating in post holes (or similar holes) each n.exc 0.5 cu.m, getting out hard/dense soil and including removal of exavated materials to a distance n. exc 50 m and making good surface complete all as specified.

M&L for Plain Cement Concrete Type C-1 1:3:6 (using 20 mm graded stone aggregate) as in post holes/fdn filling etc. complete all as specified.

M & L Providing RCC 1:2:4, type B-1 (nominal mix) using 20 mm graded stone aggregates as in roof slab, roof beam, parapet walls, chajjas, shelves, lintel and similar suspended work in any situation complete all as specified and directed.

M&L Providing cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate in cills, steps, seismic and other similar bands, plinth courses, string courses, copings, kneelers, apex stones, bed plates, and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L Broken stone or boulders Hardcore of gauge n.exc 63mm depostied spread and levelled in layers n.exc 15cm thick watered and rolled/rammed to a ture surface complete all as specified.

M&L for 75 mm thick PCC type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as specified.

M & L Machine cut prepolished kota stone slab (size of each slab 595 x 595 mm) flooring 15-18 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and rounding/moulding edges & corners as per site reqmt complete with & incl 20 mm thick screed in CM 1:6 complete all as specified.

S & F rolled Mild Steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to ISI 1161-1998 grade St-240, complete all as specified and directed by Engr-in-Charge.

S & F Mild Steel flat iron as in wind ties complete all as specified and directed.

S & F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted forged into spikes, farmed guard bars; barred iron doors, ladders, framed balusters; and similar works confirming to Fe 290 (gde 165) including welding and all as specified by Engr-in-charge.

S & F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 290 (Gde E-165), with gusset plates, rails braces, etc., drilled for fixing of steel sheeting or other covering and hanging and fixing complete all as specified and directed.

Preparation of new steel surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.

Supply & fixing 6 mm thick polycarbonate coloured sheets fixed on roofs as in circular/ semi circular/ arch type shape including self tapping screws/ form work/ scafolding if required at site to complete the work including with adequate size steel screws, washers, nuts, rubber strips/rubber beadings, silicone etc and aluminium/ MS flat etc as per manufacturer's instructions complete all as specified and as directed.

Surface dressing n.exc 15 cm deep and getting out as in hard/ dense soil complete all as specified and directed.

Excavating in trenches in hard/dense soil, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out complete all as specified and directed.

Cement concrete in foundations, filling and mass-concrete 1:4:8 type D2 using 40 mm graded stone aggreagte) complete all as specified and directed.

Reinforced Cement Concrete M-25 (using 20 mm graded stone aggregate) in foundations including rafts, footings, plinth beams and mass concrete complete all as specified and directed.

Reinforced Cement Concrete M-25 (using 20 mm graded stone aggregate) in Columns, piers, posts and struts complete all as specified and directed.

Reinforced Cement Concrete M-25 (using 20 mm graded stone aggregate) in Beams,bands, cantilevers, lintels over 1.5 M span complete all as specified and directed.

Reinforced Cement Concrete M-25 (using 20 mm graded stone aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed.

Form work flat (rough finished surfaces) of concrete foundations rafts, plinth beams etc complete all as specified and directed.

Form work Square, rectangular or polygonal to sides of pillars, posts, struts, columns and stanchions complete all as specified and directed.

Form work to sides and soffits of floor or roof beams, bands, lintels, cantilevers, shelves including supports etc complete all as specified and directed.

Form work flat ( rough finished surfaces) of concrete to soffits of suspended slabs such as roof slabs, florr slabs, landings and similar works not exceeding 200 mm thick (horizontal or sloping) etc complete all as specified and directed.

Form work (flat) to edges of concrete, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n.exc 20cm wide and sies of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n.exc 20cm wide complete all as specified and directed.

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips quality complete all as specified and directed.

Mild steel TMT bars 8 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

M & L rendering 20 mm plaster in CM 1:4 on RCC roof as wearing surface with WPC as per manufacturers instruction complete all as specified and directed.

M&L brick work with sub class 'B' bricks (designation 75) straight or curved on plan exc 6m mean radius in cement mortar 1:6 for walls etc complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius in cement mortar 1:4 for walls etc complete all as specified and directed.

M&L cement plaster 15mm thick on fair faces of brick/conc surfaces of walls in cement mortar 1:6 finished even and smooth complete all as specified and directed.

M & L rendering 15 mm thick in CM 1:4 mixed with water proofing compound complete all as specified and directed.

Rendering 5 mm thick on (concrete) ceiling surfaces including three coat of white wash over newly plastered surfaces complete all as specified.

Earth filling under floors including watering and consolidation complete (earth shall be used from excavation free from vegetation, pebbelse/foreign materials complete all as specified and directed.

M & L 75mm th PCC 1:5:10 type E2 using 40 mm graded stone agg as in sub base flooring complete all as specified and directed.

M & L 40 mm th PCC 1:2:4 type B0 using 12.5 mm graded stone agg as in damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

M&L 50mm thick plinth protection/path edging in cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate, finish even & smooth without using extra cement complete all as specified and directed.

Material and labour for non skid ceramic tiles, coloured, joint less, size 400mmx 400mm x 7 to 8mm, first quality, as in floor etc, set and jointed with neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 20mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles 450mm x 300 mm x 6 to 7mm thick , first quality, as on skirting , dados, walls etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 15mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M & L For 16 to 18 mm thick Dholpur stone cladding (mosaic) with machine cut edges, of colour & shade as per sample kept in GE Office, each stone size exceeding (0.09 sqm), fixed with and including adhessive of approved quality, joints filled with sillicon color pigment adhessive to match the surface as per site requirement complete all as specified and directed.

Material and labour 18 to 20 mm thick composite marble red in colour (as per sample kept in GE Office) in pavings and floors of size not less than 1.20m x 0.75m as ordered, best quality machine cut and granite polished , fixed and jointed with grey cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab over and including screed bed 20mm thick in cement mortar 1:4 complete incl rubbing and polishing with and incl dismentling of existing floor including bedding, removing unserviceable material to a distance of 1.50 Km complete all as specified and directed.

M&L for table rubbed & polished 18 to 20 mm thick marble ( Makrana white in colour) as per sample kept in GE Ofiice in paving & floor of minimum size 600x600mm, as ordered best quality machine cut fixed and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade including grinding polishing etc over and including of 20mm thick screed bed in CM 1:4, including dismantling of existing floor and bedding & removing the debries and unserviceable material upto 1.50 km all as specified and directed.

Material and labour 15 to 18 mm thick granite slabs of shade and colour approved by GE, in vertical surfaces like pillars, posts, struts etc width and length as ordered, best quality with and including necessary adhessive and other fixing arrangement , fixed and jointed with grey cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab including rubbing, polishing rounding corners and edges as ordered as per site requirement complete all as specified and directed.

M & L for prepolished machine cut Kota Stone Slab of size 595x595mm flooring, 20 to 22mm thick, best quality over and including cement screed bed 20mm thick in cement mortar 1:6, laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab, with and including dismantling of existing floor including bedding, removing unserviceable material to a sistance of 1.50 Km complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting pointturning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

S & F 75 mm bore PVC (SWR) Soil, waste and rain water pipes single socketed in any length with rubber ring joints fixed to walls.

S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and directed.

Supply and fixing UPVC rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of lat iron of size 25mm x 3mm including nuts bolts etc, complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F 110mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and directed.

S&F Nahani traps 100mm dia with grating including jointing to waste pipe fixed in cement conc type B-1 1:2:4 complete all as specified and directed.

S & F Vitreous China Wash down water closet pedestal white(ETWC) with seat cover complete all as specified and directed.

S & F 100mm dia traps 'P' or 'S' complete all as specified and directed.

Supply and fixing vitreous china urinal half stall type, white including all fixing accessories like waste coupling, waste pipe and urinal spreader and PVC connection etc, complete all as specified and all as specified and directed.

S & F PVC valveless, syphonic actiion type,10 ltrs capacity flushing cistern, low level, (white) inlet, ball valve, float and handle including brackets and connection to pipes and fixing of chain and pull or lever, if any complete all as specified and directed.

S & F Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed.

Supply and fixing central hole Basin Mixer, without poupwaste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed.

S&F health faucet including complete fitting/fixing arrangement complete all as specified and directed.

S & F 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F Fancy type chromium plated 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S/F PVC connection 450mm long complete all as specified and directed.

Supply and fixing angular stop cock, cast copper alloy chromium plated, fancy type, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed.

Supply and fixing angular stop cock (concelaed type) cast copper alloy chromium plated, fancy type, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed.

S&F vitreous china Urinal, partitions slabs terminating about 40cm above floor level, complete all as specified.

S & F Soap dish, vitreous China white, approximate size 160 x 160 x 90mm complete all as specified and directed.

S & F chromium plated tubular towal hand rail 20mm dia, D type, 60 cm long between flanges complete all as specified and directed.

S & F 25 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc, fixed to walls and ceilings or laid in floors complete all as specified and directed.

S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc, fixed to walls and ceilings or laid in floors complete all as specified and directed.

S & F 15 mm bore Galvanized Steel tubes, medium grade concealed/ or unconcealed , water supply pipes etc, fixed to walls and ceilings or laid in floors complete all as specified and directed.

S & F 1000 Ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S & F 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F 20mm bore dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S& F PVC Door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, complete all as specified and directed.

S/F factory made solid panel PVC shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside all as specified and as per drawings complete all as specified and directed.

Supply and fixing Factory made steel window or ventilator fixed type complete with glazing bars, dovetailed or welded fixed complete all as specified.

Supply and fixing 4mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square n.exc 0.5 sqm in each panes complete all as specified and directed.

S & F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed.

S/F 100mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed for PVC door, type C-21 complete all as specified and directed.

S & F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

M&L for three coats of white wash on ceiling surfaces including preparation of new surfaces complete all as specified and directed.

M & L two coat of Oil bound distemper including a coat of primer including preparation of newly plastered surfaces of wall with putty complete all as specified and directed.

Preparing New surfaces by washing, rubbing down and stopping of surfaces and applying two coats of weather proof acrylic emulsion paints, exterior grade(100% acrylic) on surface of walls & including wall care putty and one coat of primer complete all as specified and directed.

M & L two coats of cement base paint including preparation of newly plastered surfaces of wall complete all as specified and directed.

M & L for PCC (1:3:6) type C1 (40mm graded stone aggregate as in surface channels and drains bed, complete all as specified and directed.

Providing, 100 mm thick Factory made precast perforated reinforced cement concrete cover slab Type B-1 (1:2:4) using 20 mm graded stone aggregate with 2 mm thick MS frame with required width and necessory reinforcement set in cement morter 1:4 over drains, sizes of drain cover ordered as required at site all as specified and directed by Engineer -in- Charge. Make : Venus/NTC/NITCO or equivalent make approved by GE.

M&L Point wiring with multi stranded copper conductor, PVC insulated and unsheathed FRLS cable, two run of single core cable for phase & neutral and one run of single core cable for earth continuity conductor to common earth and connected to earth dolly including new cast iron sunken boxes duly painted with two coat of anticorrosive paint over a coat of red oxide primer on surface in touch with wall and synthetic enamel paint over a coat of red oxide on other side covered with 3mm thick plastic laminated sheet, comprising the following :-

One socket outlet three pin, 6 Amp on the same board with 1.5 Sqmm ( nominal area) FRLS cable & 1.5 Sqmm ( nominal area) cable as earth continuity conductor, complete all as specified and directed.

One socket outlet three pin, 6 Amp, independent, with 1.5 Sqmm ( nominal area) FRLS cable & 1.5 Sqmm ( nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC heavy duty concealed conduit complete all as specified.

One socket outlet three pin, 6/16 Amp, independent, with 2.5 Sqmm ( nominal area) FRLS cable & 2.5 Sqmm ( nominal area) cable as earth continuity conductor, in and incluidng rigid non metallic PVC heavy duty concealed conduit acomplete all as specified.

One light /bell/buzzer point controlled controlled by one Way switch with 1.5 Sqmm copper conductor, in and including non metallic PVC heavy duty CONCEALED CONDUIT complete as directed.

S&F switch piano type 6 Amp one way single phase confirming to IS-3854-1997 complete all as specified and directed.

S&F switch piano type 16/20 Amp one way single phase confirming to IS-3854-1997 complete all as specified and directed.

S&F socket shuttered outlet 2/3 pin 6 Amp Piano type multi purpose combined (ISI Marked) complete all as specified and directed.

S&F socket shuttered outlet 2/3 pin 6/16 Amp Piano type multi purpose combined (ISI Marked) complete all as specified and directed.

S&F Ceiling rose, surface bakelite 65x50mm, two to three terminals complete, all as specified.

S&F Lamp holder batten insulated body, cord grip pattern, complete all as specified and directed.

S&F of MCB distribution board powder coated double door flush mounted complete with locking arrangement suitable for 8 way SPN, 200 Amp , 230 volt AC supply.

S&F of MCB distribution board powder coated double door flush mounted complete with locking arrangement suitable for 2 way SPN, 200 Amp , 230 volt AC supply.

S & F, MCB SPN, 63 Amp, 240 Volts, having breaking capacity 10 KA complete all as specified and directed.

S & F, MCB SPN, 32 Amp, 240 Volts, having breaking capacity 10 KA complete all as specified and directed.

S & F, MCB Single Pole, 6 to 32 Amp, 240 volts, having breaking capacity, complete all as specified and directed.

S&F indoor decorative extruded aluminium anodised housing LED batten integrated type luminaire 4 feet size with high efficiency electronic driver system wattege nor more than 20 watt (Lumine output not less than 2000 lumine) power factor more than 0.9 with surge protection device minimum 2KV, colour temp not less than 6000K, LED driver with constant output voltage and current at input voltage of 140V to 285V AC at 50HZ, CRI more than 80, gare free, 0 UV radiation, light fitting, long life burning hours 50000 hours with wall mounting arrengement and making connections with PVC insulated copper conductor 3 core cable of 0.5 sqmm complete all as specified.

S&F indoor decorative extruded aluminium anodised housing LED batten integrated type luminaire 2 feet size with high efficiency electronic driver system wattege nor more than 10 watt (Lumine output not less than 2000 lumun) power factor more than 0.9 with surge protection device minimum 2KV, colour temp not less than 6000K, LED driver with constant output voltage and current at input voltage of 140V to 285V AC at 50HZ, CRI more than 80, gare free, 0 UV radiation, light fitting, long life burning hours 50000 hours with wall mounting arrengement and making connections with PVC insulated copper conductor 3 core cable of 0.5 sqmm complete all as specified.

Sub main wiring using two single core, PVC insulated and unsheathed FRLSH multi stranded copper conductor of size 6 Sqmm ( nominal area) 1100 volts grade with and including PVC pipe of 25/32 mm dia size with cutting & chases in wall and making good for for PVC concealed conduit with and including continuous earth wire of size of 6 Sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor 1100 volts grade, cable as earth wire and connected to main board and making good disturbed complete all as specified and directed. Note : (i) Three runs each of one RM of 6 Sqmm cable shall be considered as 1 running metre for payment purposes. (ii) Cutting chases and PVC conduit will be measured and paid separately

Sub main wiring using three single core, PVC insulated and unsheathed FRLSH multi stranded copper conductor of size 10 Sqmm ( nominal area) 1100 volts grade with and including PVC pipe of 25/32 mm dia size with cutting & chases in wall and making good for for PVC concealed conduit with and including continuous earth wire of size of 10 Sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor 1100 volts grade, cable as earth wire and connected to main board and making good disturbed surface complete all as specified and directed. Note : (i) Three runs each of one RM of 10 Sqmm cable shall be considered as 1 running metre for payment purposes. (ii) Cutting chases and PVC conduit will be measured and paid separately

Supply & fixing fan ceiling complete with electronic type regulator and accessories 230V, 1400 mm sweep complete all as specified and directed.

Supply & fixing exhause fan 380 mm sweep AC with louvers complete all as specified and directed.

Cutting of existing water supply main any size upto 25mm for taking branch connection for taking branch connection of size 15 mm including insertion of Tee equal/unegual all as specified at site or directed by Engineer-in-Charge.

Supply & fixing of 20/25 mm dia, rigid non metallic PVC concealed conduit, 'ISI marked', inclusive of all fittings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing accessories such as couplers lock nuts, saddless, pipe hooks etc for wiring, complete all as specified.

Cutting chases in existinig wall for laying of PVC conduits including making good disturbed surfaces of wall after concealing the conduit in wall all as specified.

Supply and fix LED retrofit lamp 7 watt including B22 holder based polycarbonate body & aluminium heat sink white complete all as specified and directed.

Supply and fix decorative LED post top lantern light with milky diffuser 20W complete all as specified and directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded galvanized steel strip or wire armoured electric poer cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 6.0 sqmm 2 core complete all as specified and directed.

M&L Material & labour for earthing complete with galvanized steel earth plate electrode size 600x600x6.0mm thick burried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanized earth lead 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized including GI protection pipe light grade 15mm bore connected to main earth wire on pole light grade 15mm bore connected to main earth wire on poleor control board or main switch and GI pipe medium grade 20mm bore for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC 1:2:4 type B1 using 20mm graded stone aggregate excavation and earth work all as shown in electrical plate No 3 of MES Schedule part I of 2009 connected to earthing test point indicaed including testing on completion all specified & as directed. Note:- The unit rate including for protection pipe and GI earth wire 4.00 mm dia from top to earth plate up to 7.5 meter.

M&L for providing and fixing Gyp board panel laminated with texture vinyl coated paper tiles of size 595mmx595mmx9mm thick as in ceiling having snap grid 600mmx600mm including GI wall angle of size 24mmx24mmx0.43mm thick along with perimeter of ceiling, fixed to walls/ partition with the help of nylon sleeves at 450mm centre to centre, suspending intermediate Tee section of size 24mmx38mmx0.35mm thick and cross Tee-section 24mmx25mmx0.3mm thick suspended from soffit of ceiling at up to 900 mm centre to centre or adjustable as required at site.4mmdia GI wire hangers fixed/tightened with ceiling with the help of nylon sleeve/rawl plugs complete all as specified and directed.

PARVEEN KUMAR AND SONS

m/s AR Construction co