Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.8 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹40.0 L+₹4.5 L (12.7%)Rejected-Finance | L2 | Rejected-Finance Not lowest | |
| 3 | L3₹40.2 L+₹4.7 L (13.4%)Rejected-Finance | L3 | Rejected-Finance Not lowest | |
| 4 | L4₹40.5 L+₹5.0 L (14.1%)Rejected-Finance BIDHAN PALLY OODLABARI P O MANABARI P S MALBAZAR DIST JALPAIGURI | JALPAIGURI | L4 | Rejected-Finance Not lowest | |
| 5 | L5₹40.7 L+₹5.3 L (14.8%)Rejected-Finance | L5 | Rejected-Finance Not lowest |
Tender Value
₹34 L
EMD Value
₹68,000
Closing Date
21 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SEVOKE ROAD
GE Sevoke Road Post Salugara Dist Jalpaiguri PIN 734008
REPAIR TO WATER SUPPLY AND CONNECTED ITEMS AT ZONE A AREA AT SEVOKE STN UNDER GE SEVOKE ROAD
2022_MES_558480_1
GE/SEV/42 of 2022-23
Open Tender
Civil Works
Item Rate
270 days
GE SEVOKE ROAD
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
Yes
GE SEVOKE ROAD
₹68,000
Yes
28 Dec 2022
19 Oct 2022
24 Nov 2022
19 Oct 2022
21 Nov 2022
7 Nov 2022
20 Oct 2022 - 29 Oct 2022
60 days
Amount
Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth and getting out excavated material for laying/ taking out pipe line, cables, etc in soft/ loose soil complete all as specified and directed
Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in each layer in soft/ loose soil complete all as specified and directed
Removal of surplus soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed
M & L for PCC (1:3:6) type C2 using (40mm graded crushed stone aggregate) as in foundations filling and mass concrete or any other works all as directed by Enginner- in -Charge
Taking up or down from any position existing GI water tubing and connections carefully including cleaning for refixing or removal to E/M store yard complete all as specified and as directed for following sizes:- Note :- Excavation/earth work shall be measured and paid seperately under respective item
20 mm bore
25 mm bore
40 mm bore
50 mm bore
80 mm bore
100 mm bore
Relaying/Fixing old serviceable water tubing, jointing and testing as obtained from item No.5 here-in-before in new or existing position, laid in trenches, fixed to wall/celling or floors including making holes in wall where required complete all as specified and directed by Engr-in-charge for the following sizes:-
20 mm bore
25 mm bore
40 mm bore
50 mm bore
Supply, laying, jointing & testing galvanised iron tubing medium grade with all fittings such as bends, elbow, tee, socket, reducers, unions etc as required at site laid in trenches complete all as specified and directed for the following sizes:-
20 mm bore
25 mm bore
40 mm bore
50 mm bore
80 mm bore
100 mm bore
S&F in repair gun metal gate/globe valve, ISI Marked, with iron wheel head screwed both ends for pipe including taking down unserviceable complete all as specified and as directed the following sizes:-
50 mm bore
40 mm bore
25 mm bore
20 mm bore
Supply, laying, jointing & testing U-PVC pipeline with all fittings such as bends, elbow, tee, socket, reducers unions etc as equired at site laid in trenches complete all as specified and directed for the following sizes:-
20 mm bore
25 mm bore
40 mm bore
50 mm bore
Cutting of existing cast iron/DI pipes in any position for insertion of new Tee, Coller, Tail pieces etc for taking out connections, branch connections complete all as specified and directed for the following sizes:- Note :- (a) Excavation/earth work shall be measured and paid seperately. (b) Fittings shall be measured and paid seperately.
150 mm bore
100 mm bore
Taking out cast iron/Ductile iron/PVC/Cemented water mains including all fittings with flanged joints/tyton joints/ spigot and socket ends for the following sizes :-
150 mm bore
100 mm bore
Supply, laying, jointing and testing of Ductile iron water mains Class K-7 with spigot and socket ends including rubber gasket joints laid in trenches complete all as specified and directed for the following sizes :-
150 mm bore
100 mm bore
Supply, fixing and testing DI fittings for spigot & socketed or flanged pipes i.e. bends, reducers, tail pieces, tapers, tees, collars, caps, plugs with MS plate, nuts, bolts, washers gaskets etc of sizes 80mm to 200mm dia including taking out Unserviceable complete all as specified and directed .
M&L for boring drilling, threading and tapping on existing cast iron mains of size 80 mm to 300 mm bore for connecting 15/20 mm bore pipe by fixing on clamp made out of MS flat iron of size 40 x 3 mm made to required shape & size with GI socket duly welded, nut & bolts etc. complete all as specified and directed.
Repair to existing GI pipe line to prevent the leakage including cutting the pipe line in position and insertion of new fittings like sockets, tees, reducers, bends as required at site or welding of suitable size all as directed by Engr-in-charge for the following sizes :- Note:- GI fittings shall be measured separately as supply only
Supply only GI socket of following sizes:-
50 mm bore
25 mm bore
20 mm bore
Supply only GI union of following sizes:-
50 mm bore
40 mm bore
25 mm bore
20 mm bore
Supply only GI Nipple of following sizes:-
50 mm bore
40 mm bore
25 mm bore
20 mm bore
Supply only GI reducer socket of following sizes:-
50x40 mm bore
50x25 mm bore
40x25 mm bore
Supply only GI plug of following sizes:-
50 mm bore
40 mm bore
25 mm bore
20 mm bore
S & F Stack clamp made out of 50mm x 5mm, mild steel flat iron including nuts, bolts, gasket etc for the following sizes:-
150mm bore
100mm bore
80mm bore
M & L for taking out sluice valve, refacing, remetaling,regrinding and refixing of following bore dia, complete all as specified and directed:
200mm Bore
150mm bore
100 mm bore
S&F sluice valve PN 1.6 with Stainless steel spindle nuts, bolts, washers and rubber gasket sheet for packing including taking out existing unserviceable sluice valve fixed at any position all as specified and directed by Engineer-in-charge.
150mm bore
100mm bore
80 mm bore
M&L Burning out Lead Joint in Cast Iron Pipes 100mm to 150mm bore in any Position including recovering old Lead and caulking jute rope and run melted lead and caulking with chisel properly complete all as specified and as directed. Note- Excavation & earth work if required shall be measured and paid separately. (ii) Additional lead and Jute rope will be measured and paid separately under respective items as supply only.
Supply only Lead
Supply only Jute Rope
S & F mechanical joint of following sizes, complete all as specified and directed:
200mm bore
150mm bore
100mm bore
Cleaning of over head/Under ground sump, RCC tank of following capacity by de- watering duly scraping the inner surface cleanig the same with bleaching powder including lime wash of the complete inner portion of tank all as directed by Engr-in-Charge. Note- (i) Cost of sefty equipment such as sefty belt and Scafolding etc is deemed to included in the quoted item rate.
For 50,000 Gallon O/H tanks at 18 to 20 mtr height
For 40,000 Gallon O/H tanks at 18 to 20 mtr height
For 50,000 Gallon U/G Tank ( MAP Majors area PH)
For 100,000 Gallon U/G Tank ( MAP ORs area PH)
Dismantling of GI Pipe Connections from the Pressure Filter Plant capacity 6000 to 10000 Gallons, opening the Manhole and removal/taking out old Filter Media completely from Oxidation Chamber, Pre-filter, Iron Removal Filter and depositing the same to a distance not exc. 100 Metre and re-fixing the pipes in the original/existing Position after replacement of unserviceable PVC Nozzale (Dome type) including replacement of Gasket of Manhole Cover and necessary Bolts, Nuts, Washers, etc. as required, complete all as specified and as directed.
Supply and incorporation of MNO2 of size 1/2'' x 1'' as filter media of iron removal plant ,complete all as specified & directed.
Supply and incorporation of GRAVEL of size 1 1/4'' x 1 1/2''(collection sourceBARAKAR river bank) as filter media of iron removal plant complete all as specified & directed.
Supply and incorporation of GRAVEL of size 1/2'' x 1''(collection sourceBARAKAR river bank) as filter media of iron removal plant complete all as specified & directed.
Supply and incorporation of GRAVEL of size 1/4'' x 1/2''(collection sourceBARAKAR river bank) as filter media of iron removal plant complete all as specified & directed.
Supply & incorporation of SAND of size 1/6" x 1/8'' mesh (collection source BARAKAR river bank) as filter media of iron removal plant complete all as specified & directed.
Supply & incorporation of Anthracite grit of size 1/8" x 1/4'' as filter media of iron removal plant complete all as specified & directed.
Supply & fixing PVC strainers ISI marked of sizes as dismantled complete all as specified & directed.
M & L Painting to External Surfaces of Iron Removal Chamber, Pre-filter Chamber, Oxidation Chamber including Pipes complete of Fiteration Plant capacity 8000 GPH with Two Coats of Sythetic Enamel Paint of approved colour over a coat of Red Oxide Primer including neccessary preparation of surfaces, complete all as specified and as directed.
M&L Painting to Internal Surfaces of Iron Removal Chamber, Pre- filter Chamber and Oxidation Chamber complete of Filteration Plant capacity 8000 GPH with Two Coats of Black Bituminous Paint (Lead Free) suitable for Drinking Water grade including necessary surface preparation by means of scraping, brushing, cleaning, complete all as specified and as directed.
Testing of water sample of various pump houses of sevoke militry station for bacteriological and chemical testing (systematic analysis) from government approved laboratory including submitting the report to the engineer in charge ,complete all as specified & directed.
Supply & fixing in repair Pressure guage of capacity 210 kg/cm2. complete all as specified and as directed.
S&F 3 phase Digital panel volt Meter Flush Mounting 96x96mm, Accuracy Class-I, input voltage measurement range 17-520V AC (P-P), including taking out unserviceable complete all as specified and as directed.
S&F 3 phase 5A, Digital panel ammeter Flush Mounting 96x96mm, Accuracy Class-I, CT/PT Site programmable including taking down existing unserviceable one complete all as specified and as directed.
S&F 3 phase indicator lamp including taking down existing set complete all as specified and as directed by Engr-in-Charge
M&L for construction of valve chamber of sizes 1200mm x 1200mm x1200mm (internnal dimensions) with MS sheet cover 3mm thick with angle iron frame of size 50 x 50 x 6mm and locking arrangements including excvation and earth work in any type of soil,PCC (1:4:8) type D2 in foundation ,PCC benching 1:2;4 type B-1 ,PCC (1:5:8) block masonry 20 cm thick in cement mortor (1:6),10 mm thick plastering in CM 1:4 ,PCC bed in (1:3:6) and coping 50mm hick in cement concrete 1:2:4 type B1 using 20mm stone aggregate including necessary formwork, painting one coat of red oxide and two coats of bituminious black paint on all steel surfaces as specified and as directed including demolition of existing valve chamber,complete all as specified and as directed.
M&L for transportation of following capacities defective pump set to workshop dismantling the same including Disconnecting electrical connections decoupling 440 volt AC submersible motor pump set of following capacities, dismantling the motor,taking out burnt winding wire from the stator, cleaning of the casing and the stator with wire brush, rewinding of motor with superior quality copper winding wire of existing size including varnishing and drying, cable jointing and repair replacement of worn out parts of pump reassembling the same with motor installing the motor and pump , reconnecting all pipe and electric connections and testing on full load complete :- Note : Spare parts replaced shall be measured & paid seperately under respective item of schedule. Cost of rewiring and winding materials is included in item rate.
M&L for taking out Centrifugal/openwell motor pump set of any capacity from site, disconnecting submersible cable meggering it to check serviceability, re-fixing the same at site after repair including, cable jointing, reconnecting all pipe and electric conections and testing on full load complete all as specified and as directed.
Transporting defective Openwell submersible Pump of Capacity 7.5/10HP capacity to work shop, dismantling the motor,taking out burnt winding wire from the stator, cleaning of the casing and the stator with wire brush, rewinding of motor with superior quality copper winding wire of existing size including varnishing and drying, reassembling the same complete as directed by Engr-in-Charge Note:- Spare parts shall be measured and paid separately as supply only.
Servicing of pump set obtained from item no 44 , dismantling all parts cleaning , brushing all parts replacement of unserviceable parts if required greasing oiling of movable parts , re- assembling all serviceable parts complete all as specified and as directed. (Note:- spare part of pump set will be measured and paid separately)
Supply only of following parts of centrifugal/openwell pump set : -
Bearing of existing size
Bearing bush rubber
Stainless Steel sleeve at staging
Impellers
Neck ring
MS stud with nuts of size of 3/8" X 2" for stage casing
Bush gun metal at intermediate section
M&L for taking out submersible pump set of any capacity from bore well complete with column pipes of any size submersible cable and steel wire rope and lowering the same in bore well after carry out necessary repairs/lowering of spare pump including T&P arrangement complete all as specified and as directed.
M&L for transportation of defective pump set to workshop dismantling the same including Disconnecting electrical connections decoupling 440 volt AC submersible motor pump set of following capacities, dismantling the motor,taking out burnt winding wire from the stator, cleaning of the casing and the stator with wire brush, rewinding of motor with superior quality copper winding wire of existing size including varnishing and drying, cable jointing and repair replacement of worn out parts of pump reassembling the same with motor installing the motor and pump , reconnecting all pipe and electric connections and testing on full load complete :- Note : Spare parts replaced shall be measured & paid seperately under respective item of schedule. Cost of rewiring and winding materials is included in item rate.
Servicing of pump set obtained from item no 48 , dismantling all parts cleaning , brushing all parts replacement of unserviceable parts if required greasing oiling of movable parts , re- assembling all serviceable parts complete all as specified and as directed. (Note:- spare part of pump set will be measured and paid separately)
Supply only of following parts of submersible pump set of capacity 20 HP : -
CI stage casing
Bearing bush rubber
Stainless Steel sleeve at staging
Impellers
Neck ring
Key for impellers
MS stud with nuts of size of 3/8" X 2" for stage casing
Bush gun metal at intermediate section
Steel sleeve at intermediate section
MS pipe of 100 mm dia including socket heavy grade of 3 mtr length for column pipe
Supply only of following parts of capacity 15/12.5 HP submersible pump set : -
CI stage casing
Bearing bush rubber
Stainless Steel sleeve at staging
Impellers
Neck ring
Key for impellers
Key for impellers
Bush gun metal at intermediate section
Steel sleeve at intermediate section
Supply only of following parts of capacity 6HP submersible pump set : -
CI stage casing
Bearing bush rubber
Stainless Steel sleeve at staging
Impellers
Neck ring
Key for impellers
MS stud with nuts of size of existing size for stage casing
Bush gun metal at intermediate section
Steel sleeve at intermediate section
MS pipe of 50 mm dia including socket heavy grade of 3 mtr length for column pipe
Supply only chemical for drinking water treatement, calcium based granular high strength disinfectant chlorinating chemical having 65 % to 70 % chlorine content in granular from in a 45 kg drum. Brand should be from any manufacturer approved by E-in-C's branch.
Supply only Non feric Alum crystal type conforming BIS 260-2001 (2nd Revision) complete all as specified and as directed.
S&F Single Phase Preventor used for automatic Star Delta Stater with on delay timmer (2-3min) and auto manual switch, complete all as specified and as directed.
S&F flat submersible cable 3 core multi stranded copper conductor of size 6 sqmm. complete all as specified and as directed.
S&F in replacement nozzles of existing size with adjustments of correct direction including taking down unserviceable nozzles and removed from site complete all as specified and as directed.
M&L for cleaning of fountain well existing nozzle with wire and wire brush alignment of nozzle repair of fountain pipe line by welding and replacement of nut bolts and washers and make it run smoothly without blockage/intruption complete all as specified and as directed.
Servincing of air compressor installed at various pump houses including dismantling of motor pump set, varnishing and heating up coils , greasing and oiling of movable parts, replacements of spare parts if required complete all as specified and directed
Supply only following items as per existing size and make of air compressor:-
Compressor oil
Nut bolts
M S ALOK SAHA
SHRI JIBANDHAN PAUL
RAJIV DEY SARKER
D.D. BROTHERS
SRI SURAJIT SENGUPTA
M/S S.B. CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .