Providing and Fixing of CP/Chinaware Sanitary Fittings and allied work for S.D.H Jourian

Amount

Providing and fixing G.I. pipe to IS: 1239 (Medium class) with G.I. fittings upto 150 mm dia & above shall be M.S.7 mm thick conforming to I.S. : 3989 including synthetic enamenl paints of approved quality & shade over a coat of approved priming coat (shade as per colour code) and clamps and flanges including cutting and making good the walls complete. For rising mains, suction and delivery headers.

15 mm dia nominal bore of Medium class

20 mm dia nominal bore of Medium class

Exposed on wall

25 mm dia nominal bore of Medium class

32 mm dia nominal bore of Medium class

Providing & fixing of G.I fitting of superior and approved make heavy duty. like unik, ship.

Elbow 15mm

Elbow 20mm

Elbow 25mm

Elbow 32mm

Reducer Elbow 20mm x 15mm

Reducer Elbow 25mm x 20mm

Reducer Elbow 32mm x 25mm

Tee 15mm

Tee 20mm

Tee 25mm

Tee 32mm

Union 20

Union 25

Union 32

Tank Nipple 32 mm

Socket 15 mm

Socket 20 mm

Socket 25 mm

Socket 32 mm

Nipple1/2"x2"

Nipple1/2"x3"

Nipple1/2"x4"

Nipple1/2"x6"

Nipple3/4"x2"

Nipple3/4"x3"

Nipple3/4"x4"

Nipple3/4"x6"

Nipple3/4"x9"

Providing & fixing / Laying of U-PVC Pipe conforming to IS: 13592 Type A including jointing with seal rings/ solvent of 6 kg pressure.

50 mm dia

75 mm dia

110 mm dia

160 mm dia

250 mm dia

Providing & fixing / Laying of U-PVC Fittings / accessories for sewrage/ Drainage / rainwater pipes conforming to IS: 13592 Type A including jointing with seal rings conforming to IS: 5382 and solvent .

75mm Pvc Plain Bend

75mm Pvc Door Bend

75mm Pvc Offsets

75mm Coupler

110mm Pvc Plain Bend

110mm Pvc Door Bend

110mm Pvc Offsets

110mm Coupler

160mm Pvc Plain Bend

160mm Pvc Door Bend

50mm Pvc Offsets

110mm x 75mm Plain Tee

110mm x 75mm Door Tee

110mm x 110mm Door Tee

Cowl 110 mm

Floor Trap 110mmx 75 mm

Floor Trap 110mmx 110 mm

Floor Trap 110mmx 75 mm x 50mm

Steel Clamps 110 mm

Fasteners 4"

Providing & fixing of white vitreous China pedestial type water closet (European Type) with cistern and flush tank with CP bolts, nuts, CI chair hanging arrangements, bakelite seat & cover with CP hinges & rubber buffers, CP brass screw, washer with all accessories with WC connector with Rubber Lip / Buffer and side gap filled with silicon sealant wherever required. Including brass / SS screws and washer complete including cutting, making good the walls, floors, slab wherever required as per direction of Engineer-in-charge.(Jaquar, Hindware, Cera)

Providing and fixing white vitreous china wash basin and pedestal for basin completely recessed at the back for the reception of pipes and fittings including making all connections but excluding the cost of fittinngs.Flat back wash basin of size 550x 400mm x195 mm of superior and approved make like .(Jaquar, Hindware, Cera)

Providing & fixing of white vitreous china under counter oval wash basin/circular basin of size 595x420x200 mm or required size including making all necessary connections but excluding c/o fittings whereveras per direction of Engineer-Incharge.(Jaquar, Hindware, Cera equivalent make )

Providing & fixing white vitreous china flat back half stall urinal basin of 355x340x535mm Size) including necessary wall cutting / chasing and making good, as required for urinal flushing complete as per direction of Engineer-Incharge..(Jaquar, Hindware, Cera)

Providing & fixing white vitreous china Urinal partition of required size and shape of approved make complete as per direction of Engineer-Incharge..(Jaquar, Hindware, Cera)

Providing and fixing CP brass Fittings of superior Qualtiy approved make complete with CP brackets fixed to wooden cleats with CP brass screws.(Jaquar, Hindware, Cera)

C.P Short body bib cock

C.P Long body bib cock

C.P Angle Valve

Centre hole basin mixer

Sink mixture

C.P Jet with tube

C.P Cups

C.P Towel rings

C.P Soap Dish

C.P Towel rod

C.P Urinal Sprcader

C.P Steel Shelves

Waste Cou pling 32 mm

Glass Shelves

C.P Push cocks

C.P Gratings W/Hole

C.P Gratings Without Hole

P.V.C Connections (viking/ style) 450-600mm long

P.V.C Waste pipes

Bevelled Edge mirror 450x600mm size with s.s screws fittings

Brass Ball valve 15 mm dia

Brass Ball valve 25 mm dia

Brass Ball valve 32 mm dia

Check valve 25 mm dia Brass

C.P Toilet paper holder

C.P xtension nipple (Alloizcs) All size

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].

Making connection of G.l. distribution branch with G.l. Main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. Complete 25 to 40 mm nominal bore

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) R.C.C. top slab with 1 :2:4 mix ( 1 cemE?nt : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement: 3 coarse sand)finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finsihed with a floating coat of neat cement complete as per standard design.21.7.2 Inside size 90x80 em and 60 em deep including C.l. cover with frame (light duty) 455x61 0 mm internal diamensions.

Inside size 120x90 em and 90 em deep including C. I. cover with frame (medium duty) 500 mm internal diamensions total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg).Crushed stone aggregate

Inside size 90x80 Cm and 45 Cm deep including C.l. cover with frame (light duty) 455x610 mm.internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg)

Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete

Encasing of sewrage /drainage pipes including c/o Providing and laying of bed cement concrete1:5:10 (100mm thick) and encasing of pipes in 1:3:6 mix cement concrete including earth work for laying of pipes and formwork to edges and all carriages complete.

Providing and fixing Salem Stainless Steel kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required kitchen sink with drain board of size 510x1040 mm .

Construction of cement concrete plate form in 1:2:4 mix of size 1.5 M x1.5 Mx0.30M including c/o finshing with cement mortar 1:3 mix and finished with floating coat of neat cement and all carriages complete.

Providing and lying in position cement concrete of specified grade excluding the cost of centring and shuttering- all works upto plinth level. (crushed Stone 40 mm nominal size) 1 cement 4 coarse sand: 8 graded, stone aggregates 40mm size crushed Stone.

Providing and laying in position cement concrete of 1:3:6 grade (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) excluding the cost of centring andshuttering- All work upto plinth level.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degree, landing balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding cost of centring, shuttering, finishing and reinforcement. 1 cement: 1.5 coarse sand : 3 graded stone aggregates 20mm nominal size.

Cetring and shuttering including strutting, propping etc and removal of the form work for:

Foundation, footing, bases of columns

Suspended floors, roofs, landing, balconies and access platforms.

Edge of slabs and break in floors and walls Under 20 cms wide.

15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 6 ( 1 cement : 6 coarse sand)

Providing and laying 16mm thick Granite of any colour and shape (Area of slab over 0.5 sqm) gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.

Extra for providing edge moulding to 18 mm thick Granite stone counters, Vanities etc. over item no. 8.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble I stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete.

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing Ceramic floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete.

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.

Brickwork with common burnt clay F.P.S (non modualar) bricks of class designation 75 in superstructure in 1cement : 6 fine sand mortar.

Half brick masonry with bricks of class designation 75 in foundations and plinth, and superstructure upto floor V level in Cement mortar 1:4 (1 cement: 4 coarse sand).

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Wall Painting with plastic emulsion paint of approved lj brand and manufacture to give an even shade including primer coat with cement primmer. Two or more coats on new work

Scrub Modular ( Two way Manual) 1600mmx510mm1370mm Stainless Steel scrub with Hand Operated Tap madeof Stainless steel 304 sheet 1.6 mm thick brush finish fabricated with steamless welding and polished to stain finish/Elbow operated with all Accessories. ( Makes:- Godrej Interio, Geeken, Hens, Durian, Royal Furniture, Zorin , Ekome, Alfa)

P/F of S.S Letter ( SUB- DISTRIC HOSPITAL JOURIAN, OPD , EMERGENCY, BLOOD BANK Etc) including Fixing on board as per diections of Engineer-in-Charge, complete job.

Measurable quantities may vary at the time of actual execution of the work and shall be allowed as per actual with in the cost.

Vijay Kumar Contrator

Sumit Anand

M/s Satish Ganjoo