Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹12.5 LAccepted-Finance | 1 | Accepted-Finance Found Eligible | |
| 2 | 2₹13.5 L+₹1.0 L (8.28%)Accepted-Finance NOT AVAILABLE | 2 | Accepted-Finance Found Eligible | |
| 3 | 3₹14.5 L+₹2.0 L (16.4%)Accepted-Finance BYE PASS N H NEAR STATE BANK OF INDIA SIDHRA JAMMU | 3 | Accepted-Finance Found Eligible |
| Sl No | Description | Qty | Unit | Vishwakarma Enterprises L1 | GS ENGG WORKS L3 | N B Engineering and Electric Works L2 |
|---|---|---|---|---|---|---|
| 1.00 | Fabrication, installation, testing and commissioning of suitable capacity manually operated gate Bhagwanachak minor of D10 installed on NPC. The job involves Providing, fabrication and fitting of new gate of size (3ftX3ft) made of M.S channel ISMC75 and 6mm M.S. Sheet, stem rod of size (2mtr) with winch & worm assembly (suitable capacity) complete with cover, rain pipe and base plate. P/F of guide frame (6ftX3ft 1inch) made out of M.S channel ISMC100. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC100. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools, tackles, civil work charges, welding rod, gas & oxygen cylinder, labour charges, fabrication charges, cost of material, to and fro carriage charges etc. Complete job. | 1 | Job | 0 ₹86,500 | 0 ₹75,500 Lowest | 0 ₹81,600 |
| 2.00 | Replacement/Fabrication, installation, testing and commissioning of suitable capacity manually operated gate Kot maira minor of D10 installed on NPC. The job involves dismantling of old gate structure & providing, fabrication and fitting of new gate of size (3ftX2ft 8inch) made of M.S channel ISMC75 and 6mm M.S. Sheet, stem rod of size (2mtr) with winch & worm assembly (suitable capacity) complete with cover, rain pipe and base plate. P/F of guide frame (6ftX2ft 9inch) made out of M.S channel ISMC100. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC100. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools, tackles, civil work charges, welding rod, gas & oxygen cylinder, labour charges, fabrication charges, cost of material, to and fro, carriage charges, rebate on old parts etc. Complete job. | 1 | Job | 1,618 ₹79,282 | 1,570 ₹76,930 Lowest | 2,526 ₹81,674 |
| 3.00 | Replacement/Fabrication, installation, testing and commissioning of suitable capacity manually operated gate Doyian minor of D7 installed on NPC. The job involves dismantling of old gate structure & providing, fabrication and fitting of new gate of size (3ftX2.5ft) made of M.S channel ISMC75 and 6mm M.S. Sheet, stem rod of size (2mtr) with winch & worm assembly (suitable capacity) complete with cover, rain pipe and base plate. P/F of guide frame (6ftX2ft 6inch) made out of M.S channel ISMC100. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC100. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system.The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools, tackles, civil work charges, welding rod, gas & oxygen cylinder, labour charges, fabrication charges, cost of material, to and fro, carriage charges, rebate on old parts etc. Complete job. | 1 | Job | 1,560 ₹76,440 | 1,484 ₹72,716 Lowest | 2,442 ₹78,958 |
| 4.00 | Replacement/Fabrication, installation, testing and commissioning of suitable capacity manually operated gate Sainth minor of D7 installed on NPC. The job involves dismantling of old gate structure & providing, fabrication and fitting of new gate of size (3ftX3.5ft) made of M.S channel ISMC75 and 6mm M.S. Sheet, stem rod of size (2mtr) with winch & worm assembly (suitable capacity) complete with cover, rain pipe and base plate. P/F of guide frame (6ftX3ft 6inch) made out of M.S channel ISMC100. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC100. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools, tackles, civil work charges, welding rod, gas & oxygen cylinder, labour charges, fabrication charges, cost of material, to and fro, carriage charges, rebate on old parts etc. Complete job. | 1 | Job | 1,620 ₹79,380 | 1,564 ₹76,636 Lowest | 2,490.6 ₹80,529.4 |
| 5.00 | Replacement/Fabrication, installation, testing and commissioning of suitable capacity manually operated gate Chak Rama minor of D7 installed on NPC. The job involves dismantling of old gate structure & providing, fabrication and fitting of new gate of size (2.5ftX2ft 10inch) made of M.S channel ISMC75 and 6mm M.S. Sheet, stem rod of size (2mtr) with winch & worm assembly (suitable capacity) complete with cover, rain pipe and base plate. P/F of guide frame (5ftX2ft 11inch) made out of M.S channel ISMC100. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC100. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools, tackles, civil work charges, welding rod, gas & oxygen cylinder, labour charges, fabrication charges, cost of material, to and fro, carriage charges, rebate on old parts etc. Complete job. | 1 | Job | 1,680 ₹82,320 | 1,240 ₹60,760 Lowest | 2,445 ₹79,055 |
| 6.00 | Replacement/Fabrication, installation, testing and commissioning of suitable capacity manually operated gate D/ O 42000 installed on NPC. The job involves dismantling of old gate structure & providing, fabrication and fitting of new gate of size (5ft X2.5ft) made of M.S channel ISMC75 and 6mm M.S. Sheet, stem rod of size (3mtr) with winch & worm assembly (suitable capacity) complete with cover, rain pipe and base plate. P/F of guide frame (10 ftX2ft 7inch) made out of M.S channel ISMC100. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC100. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools, tackles, civil work charges, welding rod, gas & oxygen cylinder, labour charges, fabrication charges, cost of material, to and fro carriage charges , rebate on old parts etc. Complete job. | 1 | Job | 1,620 ₹79,380 Lowest | 2,100 ₹1,02,900 | 2,577 ₹83,323 |
| 7.00 | Replacement/Fabrication, installation, testing and commissioning of suitable capacity manually operated gate DO 62000 installed on NPC. The job involves dismantling of old gate structure & providing, fabrication and fitting of new gate of size (4ftX2ft) made of M.S channel ISMC100 and 6mm M.S. Sheet, stem rod of size (3mtr) with winch & worm assembly (suitable capacity) complete with cover, rain pipe and base plate. P/F of guide frame (9ftX2ft 1inch) made out of M.S channel ISMC125. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC125. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools, tackles, civil work charges, welding rod, gas & oxygen cylinder, labour charges, fabrication charges, cost of material, to and fro carriage charges, rebate on old parts etc. Complete job. | 1 | Job | 1,620 ₹79,380 | 1,450 ₹71,050 Lowest | 2,700 ₹87,300 |
| 8.00 | Replacement/Fabrication, installation, testing and commissioning of suitable capacity manually operated gate D6 installed on NPC. The job involves dismantling of old gate structure & providing, fabrication and fitting of new gate of size (5ftX6ft7inch) made of M.S channel ISMC100 and 6mm M.S. Sheet, stem rod of size (3mtr) with winch & worm assembly (suitable capacity) complete with cover, rain pipe and base plate. P/F of guide frame (8ftX6ft 8inch) made out of M.S channel ISMC125. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC125. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools, tackles, civil work charges, welding rod, gas & oxygen cylinder, labour charges, fabrication charges, cost of material, to and fro carriage charges, rebate on old parts etc. Complete job. | 1 | Job | 2,148.8 ₹1,05,291.2 Lowest | 2,500 ₹1,22,500 | 3,975 ₹1,28,525 |
| 9.00 | Replacement/Fabrication, installation, testing and commissioning of suitable capacity manually operated gate D8 installed on NPC. The job involves dismantling of old gate structure & providing, fabrication and fitting of new gate of size (4ftX5ft) made of M.S channel ISMC75 and 6mm M.S. Sheet, stem rod of size (2mtr) with winch & worm assembly (suitable capacity) complete with cover, rain pipe and base plate. P/F of guide frame (8ftX6ft) made out of M.S channel ISMC100. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC100. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools, tackles, civil work charges, welding rod, gas & oxygen cylinder, labour charges, fabrication charges, cost of material, to and fro carriage charges, rebate on old parts etc. Complete job. | 1 | Job | 2,058 ₹1,00,842 | 2,900 ₹1,42,100 | 2,884.5 ₹93,265.5 Lowest |
| 10.00 | Replacement/Fabrication, installation, testing and commissioning of suitable capacity manually operated gate Small D/O at main canal installed on NPC. The job involves dismantling of old gate structure & providing, fabrication and fitting of new gate of size (5ftX2ft) made of M.S channel ISMC75 and 6mm M.S. Sheet, stem rod of size (3mtr) with winch & worm assembly (suitable capacity) complete with cover, rain pipe and base plate. P/F of guide frame (8ftX2ft 1inch) made out of M.S channel ISMC100. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC100. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools, tackles, civil work charges, welding rod, gas & oxygen cylinder, labour charges, fabrication charges, cost of material, to and fro carriage charges, rebate on old parts etc. Complete job. | 1 | Job | 1,570 ₹76,930 Lowest | 1,624 ₹79,576 | 2,520 ₹81,480 |
Tender Value
₹19.6 L
EMD Value
₹39,160
Closing Date
13 Nov 2025, 2:00 pmClosed
Executive Engineer MID Akhnoor/Nowshera
Office of Executive Engineer MID Akhnoor/Nowshera
Supply, Installation, Testing and commissioning of various outlet and Distributary Gates in lieu of old/wornout/damaged gates installed at different distributary of New Pratap Canal.
2025_IFC_293863_1
MID/AN/69
Open Tender
Machineries/ Mechanical Engg Items
Item Wise
90 days
Akhnoor
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
Executive Engineer MID Akhnoor/Nowshera
₹39,160
Yes
Office of Executive Engineer MID Akhnoor/Nowshera
14 Nov 2025
31 Oct 2025
14 Nov 2025
31 Oct 2025
13 Nov 2025
4 Nov 2025
3 Nov 2025
Fabrication, installation, testing and commissioning of suitable capacity manually operated gate Bhagwanachak minor of D10 installed on NPC. The job involves Providing, fabrication and fitting of new gate of size (3ftX3ft) made of M.S channel ISMC75 and 6mm M.S. Sheet, stem rod of size (2mtr) with winch & worm assembly (suitable capacity) complete with cover, rain pipe and base plate. P/F of guide frame (6ftX3ft 1inch) made out of M.S channel ISMC100. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC100. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools, tackles, civil work charges, welding rod, gas & oxygen cylinder, labour charges, fabrication charges, cost of material, to and fro carriage charges etc. Complete job.
Replacement/Fabrication, installation, testing and commissioning of suitable capacity manually operated gate Kot maira minor of D10 installed on NPC. The job involves dismantling of old gate structure & providing, fabrication and fitting of new gate of size (3ftX2ft 8inch) made of M.S channel ISMC75 and 6mm M.S. Sheet, stem rod of size (2mtr) with winch & worm assembly (suitable capacity) complete with cover, rain pipe and base plate. P/F of guide frame (6ftX2ft 9inch) made out of M.S channel ISMC100. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC100. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools, tackles, civil work charges, welding rod, gas & oxygen cylinder, labour charges, fabrication charges, cost of material, to and fro, carriage charges, rebate on old parts etc. Complete job.
Replacement/Fabrication, installation, testing and commissioning of suitable capacity manually operated gate Doyian minor of D7 installed on NPC. The job involves dismantling of old gate structure & providing, fabrication and fitting of new gate of size (3ftX2.5ft) made of M.S channel ISMC75 and 6mm M.S. Sheet, stem rod of size (2mtr) with winch & worm assembly (suitable capacity) complete with cover, rain pipe and base plate. P/F of guide frame (6ftX2ft 6inch) made out of M.S channel ISMC100. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC100. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system.The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools, tackles, civil work charges, welding rod, gas & oxygen cylinder, labour charges, fabrication charges, cost of material, to and fro, carriage charges, rebate on old parts etc. Complete job.
Replacement/Fabrication, installation, testing and commissioning of suitable capacity manually operated gate Sainth minor of D7 installed on NPC. The job involves dismantling of old gate structure & providing, fabrication and fitting of new gate of size (3ftX3.5ft) made of M.S channel ISMC75 and 6mm M.S. Sheet, stem rod of size (2mtr) with winch & worm assembly (suitable capacity) complete with cover, rain pipe and base plate. P/F of guide frame (6ftX3ft 6inch) made out of M.S channel ISMC100. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC100. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools, tackles, civil work charges, welding rod, gas & oxygen cylinder, labour charges, fabrication charges, cost of material, to and fro, carriage charges, rebate on old parts etc. Complete job.
Replacement/Fabrication, installation, testing and commissioning of suitable capacity manually operated gate Chak Rama minor of D7 installed on NPC. The job involves dismantling of old gate structure & providing, fabrication and fitting of new gate of size (2.5ftX2ft 10inch) made of M.S channel ISMC75 and 6mm M.S. Sheet, stem rod of size (2mtr) with winch & worm assembly (suitable capacity) complete with cover, rain pipe and base plate. P/F of guide frame (5ftX2ft 11inch) made out of M.S channel ISMC100. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC100. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools, tackles, civil work charges, welding rod, gas & oxygen cylinder, labour charges, fabrication charges, cost of material, to and fro, carriage charges, rebate on old parts etc. Complete job.
Replacement/Fabrication, installation, testing and commissioning of suitable capacity manually operated gate D/ O 42000 installed on NPC. The job involves dismantling of old gate structure & providing, fabrication and fitting of new gate of size (5ft X2.5ft) made of M.S channel ISMC75 and 6mm M.S. Sheet, stem rod of size (3mtr) with winch & worm assembly (suitable capacity) complete with cover, rain pipe and base plate. P/F of guide frame (10 ftX2ft 7inch) made out of M.S channel ISMC100. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC100. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools, tackles, civil work charges, welding rod, gas & oxygen cylinder, labour charges, fabrication charges, cost of material, to and fro carriage charges , rebate on old parts etc. Complete job.
Replacement/Fabrication, installation, testing and commissioning of suitable capacity manually operated gate DO 62000 installed on NPC. The job involves dismantling of old gate structure & providing, fabrication and fitting of new gate of size (4ftX2ft) made of M.S channel ISMC100 and 6mm M.S. Sheet, stem rod of size (3mtr) with winch & worm assembly (suitable capacity) complete with cover, rain pipe and base plate. P/F of guide frame (9ftX2ft 1inch) made out of M.S channel ISMC125. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC125. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools, tackles, civil work charges, welding rod, gas & oxygen cylinder, labour charges, fabrication charges, cost of material, to and fro carriage charges, rebate on old parts etc. Complete job.
Replacement/Fabrication, installation, testing and commissioning of suitable capacity manually operated gate D6 installed on NPC. The job involves dismantling of old gate structure & providing, fabrication and fitting of new gate of size (5ftX6ft7inch) made of M.S channel ISMC100 and 6mm M.S. Sheet, stem rod of size (3mtr) with winch & worm assembly (suitable capacity) complete with cover, rain pipe and base plate. P/F of guide frame (8ftX6ft 8inch) made out of M.S channel ISMC125. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC125. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools, tackles, civil work charges, welding rod, gas & oxygen cylinder, labour charges, fabrication charges, cost of material, to and fro carriage charges, rebate on old parts etc. Complete job.
Replacement/Fabrication, installation, testing and commissioning of suitable capacity manually operated gate D8 installed on NPC. The job involves dismantling of old gate structure & providing, fabrication and fitting of new gate of size (4ftX5ft) made of M.S channel ISMC75 and 6mm M.S. Sheet, stem rod of size (2mtr) with winch & worm assembly (suitable capacity) complete with cover, rain pipe and base plate. P/F of guide frame (8ftX6ft) made out of M.S channel ISMC100. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC100. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools, tackles, civil work charges, welding rod, gas & oxygen cylinder, labour charges, fabrication charges, cost of material, to and fro carriage charges, rebate on old parts etc. Complete job.
Replacement/Fabrication, installation, testing and commissioning of suitable capacity manually operated gate Small D/O at main canal installed on NPC. The job involves dismantling of old gate structure & providing, fabrication and fitting of new gate of size (5ftX2ft) made of M.S channel ISMC75 and 6mm M.S. Sheet, stem rod of size (3mtr) with winch & worm assembly (suitable capacity) complete with cover, rain pipe and base plate. P/F of guide frame (8ftX2ft 1inch) made out of M.S channel ISMC100. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC100. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools, tackles, civil work charges, welding rod, gas & oxygen cylinder, labour charges, fabrication charges, cost of material, to and fro carriage charges, rebate on old parts etc. Complete job.
Replacement/Fabrication, installation, testing and commissioning of suitable capacity manually operated gate D4 installed on NPC. The job involves dismantling of old gate structure & providing, fabrication and fitting of new gate of size (4ftX3ft) made of M.S channel ISMC100 and 6mm M.S. Sheet, stem rod of size (3mtr) with winch & worm assembly (suitable capacity) complete with cover, rain pipe and base plate. P/F of guide frame (8ftX3ft 1inch) made out of M.S channel ISMC125. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC125. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools, tackles, civil work charges, welding rod, gas & oxygen cylinder, labour charges, fabrication charges, cost of material, to and fro carriage charges, rebate on old parts etc. Complete job.
Replacement/Fabrication, installation, testing and commissioning of suitable capacity manually operated gate D2 installed on NPC. The job involves dismantling of old gate structure & providing, fabrication and fitting of new gate of size (5ftX2ft 9inch) made of M.S channel ISMC75 and 6mm M.S. Sheet, stem rod of size (2mtr) with winch & worm assembly (suitable capacity) complete with cover, rain pipe and base plate. P/F of guide frame (9ftX2ft 10inch) made out of M.S channel ISMC100. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC100. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools, tackles, civil work charges, welding rod, gas & oxygen cylinder, labour charges, fabrication charges, cost of material, to and fro carriage charges, rebate on old parts etc. Complete job.
Replacement/Fabrication, installation, testing and commissioning of suitable capacity manually operated gate Khour minor of D7 installed on NPC. The job involves dismantling of old gate structure & providing, fabrication and fitting of new gate of size (4ftX6ft) made of M.S channel ISMC75 and 6mm M.S. Sheet, stem rod of size (2mtr) with winch & worm assembly (suitable capacity) complete with cover, rain pipe and base plate. P/F of guide frame (10ftX6ft 1inch) made out of M.S channel ISMC100. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC100. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools, tackles, civil work charges, welding rod, gas & oxygen cylinder, labour charges, fabrication charges, cost of material, to and fro carriage charges, rebate on old parts etc. Complete job.
Replacement/Fabrication, installation, testing and commissioning of suitable capacity manually operated gate D7 installed on NPC. The job involves dismantling of old gate structure & providing, fabrication and fitting of new gate of size (4.5ftX12ft 2inch) made of M.S channel ISMC100 and 6mm M.S. Sheet, stem rod of size (2mtr) with winch & worm assembly (suitable capacity) complete with cover, rain pipe and base plate. P/F of guide frame (10ftX12ft 3inch) made out of M.S channel ISMC125. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC125. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools, tackles, civil work charges, welding rod, gas & oxygen cylinder, labour charges, fabrication charges, cost of material, to and fro carriage charges, rebate on old parts etc. Complete job.
N B Engineering and Electric Works (BID ID -2635760)
GS ENGG WORKS (BID ID -2636879)
Vishwakarma Enterprises
GS ENGG WORKS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.58 MB
BOQ_950489.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .