Providing Aluminium partition for the verandahs of Kiru,Galhar and Chandna Field Hostel at Pathernaki ,Kiru H.E.Project, Kishtwar

Amount

Providing and fixing alumunium work for doors ,windows and ventilators and partitions with extruded built up stanadard tubular sections/appropriate z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixed with dash fasterner of required dia. and size including necessary filling up of gaps at junctions i.e, at top , bottom and sides with required EPDM rubber/ neoprene gasket felt etc. Aluminium sections shall be smooth,rust free, straight,mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/panelling, c.p brass/stainless steel screwa , all complete as per architectural drawings and the directions of engineer - in - Charge ( glazing, panelling and dash fasteners to be paid for separately.)

For fixed porition :- Powder coated aluminium ( minimum thickness of powder coated 50 microns)

For shutters of doors , windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubeer/neoprene gasket required ( fittings shall be paid for separately.) Powder coated aluminium (minimum thickness of powder coated 50 microns.)

Providing and fixing 12 mm thick prelaminated particle board ( conforming to IS : 12823 Grade - l type - II) in panelling fixed in aluminium doors, windows shutters and partition frames with c.p. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer - incharge.

Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.

Providing and fixing glazing in aluminium door, window, ventilators shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per architectural drawings and the directions of engineer – incharge. (Cost of aluminium snap beading shall be paid in basic item.) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg/ sqm)

Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screw etc. complete as per directions of Engineer- in- Charge. Anodized (AC 15) aluminium tubular handle bar.

Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 ) as per IS 1868 transparent or dyed to required colour and shade with necessary screws etc. complete

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100 mm

Providing and fixing aluminium hanging floor door stopper ISI marked anodised ( anodic coating not less than grade AC 10 ) as per IS 1868 transparent or dyed to required colour and shade with necessary screws complete twin rubber stopper.

Providing and fixing aluminium sliding door bolts ISI marked anodized ( anodic coating not less than grade AC 10 ) as per IS 1868 transparent or dyed to required colour and shade with nuts and screws etc. complete: 300x16mm

Providing & fixing IS:3564 marked Aluminium extruded section body tuburar type universard hydraulic door closer ( having superior brand) embodssed on the body door weight upto 36-80 kg and door width 700-1000mm with double speed adjustment with necessary accessories and screws complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the anufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the sane with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- |charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, |fasteners etc.)

MOHD RAFIQ (BID ID -3078013)

KARTIK INFOTECH SERVICES (BID ID -3079232)