Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.6 CrAccepted-Finance | ₹3.6 Cr | L1 | Accepted-Finance L1 |
| 2 | L2₹3.9 Cr+₹26.2 L (7.17%)Accepted-Finance | ₹3.9 Cr+₹26.2 L (7.17%) | L2 | Accepted-Finance L2 |
| 3 | L3₹4.3 Cr+₹60.4 L (16.6%)Accepted-Finance | ₹4.3 Cr+₹60.4 L (16.6%) | L3 | Accepted-Finance L3 |
| 4 | Rejected-Technical SIRSA | - | - | Rejected-Technical Criteria not fulfilled |
| 5 | Rejected-Technical | - | - | Rejected-Technical Criteria not fulfilled |
Tender Value
₹4.0 Cr
Closing Date
23 Sept 2021, 12:00 pmClosed
Chief Engineer (Geology)(GW)
Senior Executive Director (GW), WAPCOS Limited 1st Floor, ALPS Building, 56 Janpath, Connaught Place, New Delhi-110001
Construction of Stone Masonry Check Dams, Anicut and Recharge Shaft in Sikar District Rajasthan under Package-IV including maintenance of completed structures for 01 year
2021_WAPCO_87043_1
WAP/GWRDM/ARS/2021-22/05
Open Tender
Construction Works
Works
150 days
Delhi
As Per Tender
4 documents required · 4 mandatory
₹0
Exempted
Delhi
11 Jan 2022
3 Sept 2021
24 Sept 2021
3 Sept 2021
23 Sept 2021
14 Sept 2021
13 Sept 2021
Amount
Cutting & clearance of jungle, bushes, shrubs Ankra/Ipomoea, Juliflora typna etc. on canal and bunds in dry/moist/slushy conditions including disposal as per instructions of the Engineer-in-charge. Cost of wood has been deducted from rates and thus will be property of contractor after cutting. Thick
Dag belling, Over 10 cm to 15 cm deep
Earth work in rough (borrow area) excavation for embankment in hard soil, Morrum or highly weathered strata dry or moist, including laying in 20 cm layers (before compaction) and breaking of clods, sorting of grass, pebbles etc. and dressing when compacted manually or by plain roller with initial lead of 250 m and lift up to 1.5m (excluding charges for compaction and watering), including loading and un-loading wherever required complete in all respect.
Add extra charges for lead beyond 250m and upto 750m (for average ½ km)
Add extra for each subsequent lead of 500m or part there of beyond ½ Km and up to 5 km
Compaction of earth or highly weathered strata By mechanical equipment such as sheep foot roller/ pneumatic tyred roller/vibro compactor required as per site condition to obtain dry density of (i) at least 95% of Standard Proctor's density
Watering of earth including cost of carriage of water when source of water is up to 1 Km
Excavation including loading, unloading, disposal and dressing of excavated earth within all leads and lifts including dressing of excavated area and dewatering wherever required complete in all respect Hard soil mixed with Kankar / boulders, Morrum, Rocky Area
Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints including the cost of centering and shuttering. Well graded crusher broken stone aggregate of maximum size upto 40 mm
Refilling the excavated earth (excluding rock) in trenches, plinth side of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering including cost of water, loading and un-loading wherever required with cost of dewatering wherever required.
Random rubble stone masonry (using R. R. stones where 75 % stones to be not less than 15 cm in size in any direction and weighing not less than 23 kg.) for foundation including curing with all leads of all construction materials including curing etc. complete. In cement sand mortar 1:4
Random rubble stone masonry (using R. R. stones where 75 % stones to be not less than 15 cm in size in any direction and weighing not less than 23 kg.) for Superstructure work including curing with all leads of all construction materials including curing etc. complete. In cement sand mortar 1:4
Providing and Laying in position of Cement concrete Nominal mix (1:1.5:3) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints including the cost of centering, shuttering. Well graded crusher broken stone aggregate of maximum size upto 20mm
Providing and laying insitu vibrated M-15 ( 28 days cube compressive strength not less than 15 N /sq mm ) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for foundation filling including cost of all materials, machinery, labour, formwork,cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc.,complete with initial lead upto 50 m and all lifts.
Plaster in cement sand mortar 1:4 including racking of joints, smooth finishing & curing etc. complete including all leads of all construction materials of thickness:20mm
Providing and laying cement concrete coping in (1:2:4) with maximum size of crusher broken aggregate upto 20 mm including shuttering etc. with all leads of material complete in all respect in thickness of: 75mm
Supplying and laying quarry spalls properly graded but not more than 10cm in size with spreading in required profile including all leads & lifts
R. R. stone pitching, hammer dressed with packing of voids from small stones including all lead & lifts, in required profile of 23 cm thickness (± 5 % thickness tolerance)
Dry boulder/stone filling in required profile with filling of voids etc. complete including all lead & lifts, and well finished surface
Providing an fixing MS board (at site) as per drawing including primer, painting, lettering with well finished surface and all lead & lifts as per direction of Engineer-in-Charge
Description of Work / Item(s)
Amount
Cutting & clearance of jungle, bushes, shrubs Ankra/Ipomoea, Juliflora typna etc. on canal and bunds in dry/moist/slushy conditions including disposal as per instructions of the Engineer-in-charge. Cost of wood has been deducted from rates and thus will be property of contractor after cutting. Thick
Dag belling, Over 10 cm to 15 cm deep
Earth work in rough (borrow area) excavation for embankment in hard soil, Morrum or highly weathered strata dry or moist, including laying in 20 cm layers (before compaction) and breaking of clods, sorting of grass, pebbles etc. and dressing when compacted manually or by plain roller with initial lead of 250 m and lift up to 1.5m (excluding charges for compaction and watering), including loading and un-loading wherever required complete in all respect.
Add extra charges for lead beyond 250m and upto 750m (for average ½ km)
Add extra for each subsequent lead of 500m or part there of beyond ½ Km and up to 5 km
Compaction of earth or highly weathered strata By mechanical equipment such as sheep foot roller/ pneumatic tyred roller/vibro compactor required as per site condition to obtain dry density of (i) at least 95% of Standard Proctor's density
Watering of earth including cost of carriage of water when source of water is up to 1 Km
Excavation including loading, unloading, disposal and dressing of excavated earth within all leads and lifts including dressing of excavated area and dewatering wherever required complete in all respect Hard soil mixed with Kankar / boulders, Morrum, Rocky Area
Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints including the cost of centering and shuttering. Well graded crusher broken stone aggregate of maximum size upto 40 mm
Refilling the excavated earth (excluding rock) in trenches, plinth side of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering including cost of water, loading and un-loading wherever required with cost of dewatering wherever required.
Random rubble stone masonry (using R. R. stones where 75 % stones to be not less than 15 cm in size in any direction and weighing not less than 23 kg.) for foundation including curing with all leads of all construction materials including curing etc. complete. In cement sand mortar 1:4
Random rubble stone masonry (using R. R. stones where 75 % stones to be not less than 15 cm in size in any direction and weighing not less than 23 kg.) for Superstructure work including curing with all leads of all construction materials including curing etc. complete. In cement sand mortar 1:4
Providing and Laying in position of Cement concrete Nominal mix (1:1.5:3) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints including the cost of centering, shuttering. Well graded crusher broken stone aggregate of maximum size upto 20mm
Providing and laying insitu vibrated M-15 ( 28 days cube compressive strength not less than 15 N /sq mm ) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for foundation filling including cost of all materials, machinery, labour, formwork,cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc.,complete with initial lead upto 50 m and all lifts.
Plaster in cement sand mortar 1:4 including racking of joints, smooth finishing & curing etc. complete including all leads of all construction materials of thickness:20mm
Providing and laying cement concrete coping in (1:2:4) with maximum size of crusher broken aggregate upto 20 mm including shuttering etc. with all leads of material complete in all respect in thickness of: 75mm
Supplying and laying quarry spalls properly graded but not more than 10cm in size with spreading in required profile including all leads & lifts
R. R. stone pitching, hammer dressed with packing of voids from small stones including all lead & lifts, in required profile of 23 cm thickness (± 5 % thickness tolerance)
Dry boulder/stone filling in required profile with filling of voids etc. complete including all lead & lifts, and well finished surface
Providing an fixing MS board (at site) as per drawing including primer, painting, lettering with well finished surface and all lead & lifts as per direction of Engineer-in-Charge
Description of Work / Item(s)
Amount
Cutting & clearance of jungle, bushes, shrubs Ankra/Ipomoea, Juliflora typna etc. on canal and bunds in dry/moist/slushy conditions including disposal as per instructions of the Engineer-in-charge. Cost of wood has been deducted from rates and thus will be property of contractor after cutting. Thick
Dag belling, Over 10 cm to 15 cm deep
Earth work in rough (borrow area) excavation for embankment in hard soil, Morrum or highly weathered strata dry or moist, including laying in 20 cm layers (before compaction) and breaking of clods, sorting of grass, pebbles etc. and dressing when compacted manually or by plain roller with initial lead of 250 m and lift up to 1.5m (excluding charges for compaction and watering), including loading and un-loading wherever required complete in all respect.
Add extra charges for lead beyond 250m and upto 750m (for average ½ km)
Add extra for each subsequent lead of 500m or part there of beyond ½ Km and up to 5 km
Compaction of earth or highly weathered strata By mechanical equipment such as sheep foot roller/ pneumatic tyred roller/vibro compactor required as per site condition to obtain dry density of (i) at least 95% of Standard Proctor's density
Watering of earth including cost of carriage of water when source of water is up to 1 Km
Excavation including loading, unloading, disposal and dressing of excavated earth within all leads and lifts including dressing of excavated area and dewatering wherever required complete in all respect Hard soil mixed with Kankar / boulders, Morrum, Rocky Area
Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints including the cost of centering and shuttering. Well graded crusher broken stone aggregate of maximum size upto 40 mm
Refilling the excavated earth (excluding rock) in trenches, plinth side of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering including cost of water, loading and un-loading wherever required with cost of dewatering wherever required.
Random rubble stone masonry (using R. R. stones where 75 % stones to be not less than 15 cm in size in any direction and weighing not less than 23 kg.) for foundation including curing with all leads of all construction materials including curing etc. complete. In cement sand mortar 1:4
Random rubble stone masonry (using R. R. stones where 75 % stones to be not less than 15 cm in size in any direction and weighing not less than 23 kg.) for Superstructure work including curing with all leads of all construction materials including curing etc. complete. In cement sand mortar 1:4
Providing and Laying in position of Cement concrete Nominal mix (1:1.5:3) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints including the cost of centering, shuttering. Well graded crusher broken stone aggregate of maximum size upto 20mm
Plaster in cement sand mortar 1:4 including racking of joints, smooth finishing & curing etc. complete including all leads of all construction materials of thickness:20mm
Providing and laying cement concrete coping in (1:2:4) with maximum size of crusher broken aggregate upto 20 mm including shuttering etc. with all leads of material complete in all respect in thickness of: 75mm
Supplying and laying quarry spalls properly graded but not more than 10cm in size with spreading in required profile including all leads & lifts
R. R. stone pitching, hammer dressed with packing of voids from small stones including all lead & lifts, in required profile of 23 cm thickness (± 5 % thickness tolerance)
Dry boulder/stone filling in required profile with filling of voids etc. complete including all lead & lifts, and well finished surface
Providing an fixing MS board (at site) as per drawing including primer, painting, lettering with well finished surface and all lead & lifts as per direction of Engineer-in-Charge
Description of Work / Item(s)
Amount
Cutting & clearance of jungle, bushes, shrubs Ankra/Ipomoea, Juliflora typna etc. on canal and bunds in dry/moist/slushy conditions including disposal as per instructions of the Engineer-in-charge. Cost of wood has been deducted from rates and thus will be property of contractor after cutting. Thick
Dag belling, Over 10 cm to 15 cm deep
Earth work in rough (borrow area) excavation for embankment in hard soil, Morrum or highly weathered strata dry or moist, including laying in 20 cm layers (before compaction) and breaking of clods, sorting of grass, pebbles etc. and dressing when compacted manually or by plain roller with initial lead of 250 m and lift up to 1.5m (excluding charges for compaction and watering), including loading and un-loading wherever required complete in all respect.
Add extra charges for lead beyond 250m and upto 750m (for average ½ km)
Add extra for each subsequent lead of 500m or part there of beyond ½ Km and up to 5 km
Compaction of earth or highly weathered strata By mechanical equipment such as sheep foot roller/ pneumatic tyred roller/vibro compactor required as per site condition to obtain dry density of at least 95% of Standard Proctor's density
Watering of earth including cost of carriage of water when source of water is up to 1 Km
Excavation including loading, unloading, disposal and dressing of excavated earth within all leads and lifts including dressing of excavated area and dewatering wherever required complete in all respect Hard soil mixed with Kankar / boulders, Morrum, Rocky Area
Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints including the cost of centering and shuttering. Well graded crusher broken stone aggregate of maximum size upto 40 mm
Refilling the excavated earth (excluding rock) in trenches, plinth side of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering including cost of water, loading and un-loading wherever required with cost of dewatering wherever required.
Random rubble stone masonry (using R. R. stones where 75 % stones to be not less than 15 cm in size in any direction and weighing not less than 23 kg.) for foundation including curing with all leads of all construction materials including curing etc. complete. In cement sand mortar 1:4
Random rubble stone masonry (using R. R. stones where 75 % stones to be not less than 15 cm in size in any direction and weighing not less than 23 kg.) for Superstructure work including curing with all leads of all construction materials including curing etc. complete. In cement sand mortar 1:4
Providing and Laying in position of Cement concrete Nominal mix (1:1.5:3) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints including the cost of centering, shuttering. Well graded crusher broken stone aggregate of maximum size upto 20mm
Plaster in cement sand mortar 1:4 including racking of joints, smooth finishing & curing etc. complete including all leads of all construction materials of thickness:20mm
Providing and laying cement concrete coping in (1:2:4) with maximum size of crusher broken aggregate upto 20 mm including shuttering etc. with all leads of material complete in all respect in thickness of: 75mm
Supplying and laying quarry spalls properly graded but not more than 10cm in size with spreading in required profile including all leads & lifts
R. R. stone pitching, hammer dressed with packing of voids from small stones including all lead & lifts, in required profile of 23 cm thickness (± 5 % thickness tolerance)
Dry boulder/stone filling in required profile with filling of voids etc. complete including all lead & lifts, and well finished surface
Providing an fixing MS board (at site) as per drawing including primer, painting, lettering with well finished surface and all lead & lifts as per direction of Engineer-in-Charge
Description of Work / Item(s)
Amount
Earth work in excavation in all kinds of soils of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.
Providing and Laying in position of Cement concrete Nominal mix (1:2:4) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto (40mm)
Providing and Laying in position of Cement concrete Nominal mix (1:1.5:3) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto (20mm)
Recahrge chamber Filter bed filling
Fillter Bed filling ( 22- 30cm Thick Stone )
Fillter Bed filling ( 65mm Thick HBG metal )
Fillter Bed filling ( Coarse sand )-Natural Sand (Un-screened) including all lead and lift.
Fillter Bed filling ( 20mm Thick HBG metal )
Charcoal
Shifting of Rig & site preparation
Drilling of overburden by rock roller/ drag/ button bit to accommodate casing pipe including sample collection and preparation of litholog
Drilling by DTH method using appropriate sizes of button bits so as to reach targetted depth with diameter of hole not less than 165 mm from 50 m depth including sample
Supply & installation of ERW MS casing pipe confirming to Table 3 of latest version IS:4270-2001-Plain pipe casing 7" (175mm)
Supply & installation of ERW MS casing pipe confirming to Table 3 of latest version IS:4270-2001-Slotted pipe casing 7" ( 175mm)
Description of Work / Item(s)
Amount
Earth work in excavation in all kinds of soils of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.
Providing and Laying in position of Cement concrete Nominal mix (1:2:4) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto (40mm)
Providing and Laying in position of Cement concrete Nominal mix (1:1.5:3) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto (20mm)
Recahrge chamber Filter bed filling
Fillter Bed filling ( 22- 30cm Thick Stone )
Fillter Bed filling ( 65mm Thick HBG metal )
Fillter Bed filling ( Coarse sand )-Natural Sand (Un-screened) including all lead and lift.
Fillter Bed filling ( 20mm Thick HBG metal )
Charcoal
Shifting of Rig & site preparation
Drilling of overburden by rock roller/ drag/ button bit to accommodate casing pipe including sample collection and preparation of litholog
Drilling by DTH method using appropriate sizes of button bits so as to reach targetted depth with diameter of hole not less than 165 mm from 50 m depth including sample
Supply & installation of ERW MS casing pipe confirming to Table 3 of latest version IS:4270-2001-Plain pipe casing 7" (175mm)
Supply & installation of ERW MS casing pipe confirming to Table 3 of latest version IS:4270-2001-Slotted pipe casing 7" ( 175mm)
Description of Work / Item(s)
Amount
Earth work in excavation in all kinds of soils of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.
Providing and Laying in position of Cement concrete Nominal mix (1:2:4) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto (40mm)
Providing and Laying in position of Cement concrete Nominal mix (1:1.5:3) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto (20mm)
Recahrge chamber Filter bed filling
Fillter Bed filling ( 22- 30cm Thick Stone )
Fillter Bed filling ( 65mm Thick HBG metal )
Fillter Bed filling ( Coarse sand )-Natural Sand (Un-screened) including all lead and lift.
Fillter Bed filling ( 20mm Thick HBG metal )
Charcoal
Shifting of Rig & site preparation
Drilling of overburden by rock roller/ drag/ button bit to accommodate casing pipe including sample collection and preparation of litholog
Drilling by DTH method using appropriate sizes of button bits so as to reach targetted depth with diameter of hole not less than 165 mm from 50 m depth including sample
Supply & installation of ERW MS casing pipe confirming to Table 3 of latest version IS:4270-2001-Plain pipe casing 7" (175mm)
Supply & installation of ERW MS casing pipe confirming to Table 3 of latest version IS:4270-2001-Slotted pipe casing 7" ( 175mm)
M/s Satish Kumar And Company
M/s Amit Kumar Jain
M/s Satish Kumar And Company
M/s Amit Kumar Jain
M/s Satish Kumar And Company
M/s Amit Kumar Jain
M/s Satish Kumar And Company
M/s Amit Kumar Jain
M/s Amit Kumar Jain
Jai Baba Construction Company
M/s Amit Kumar Jain
Jai Baba Construction Company
M/s Amit Kumar Jain
Jai Baba Construction Company
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .