Construction of one Unit of Type III Residential quarters at police post Khaltsi.

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches, drains, pipes and cables etc. (not exceeding 1.5mtr in width or 1 Osqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5mtr including getting out excavated soil and disposal of surplus soil as directed, within a lead of 50 mtr. All kinds of soil

Dumping of Stone including cost of stone on horizontal on level.including carriage complete job

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 fine sand : 8 graded stone aggregate 40mm nominal size) (Crushed)

Random Rubble masonry with hard stone from nallah infoundation and plinth including levelling up with cement concrete1:6:12 (1 Cement: 6 coarse sand:12 graded stone aggregate 20mm nominal size) at plinth level with cement mortar 1:6 (1 Cement: 6 coarse sand) including carriage complete job

Providing and fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering and complete.1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size)Crushed

Reinforced cement concrete work in walls (anythickness) including attached pilasters, buttresses,plinth and string courses, fillets, columns, pillars,piers, abutmen"ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering,fmishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3graded crushed stone aggregate 20mm nominal size)

Centering and shuttering including strutting , propping etc and emoval of form for. foundation : footings, bases of columns etc for mass concrete.

Lintels, beams, plinth beams, girders, bressumers and centilevers.

Columns, Pillars, Piers, Abutments, Posts and Struts

Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete.

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to preparethe surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer

Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dashfasteners shall be paid for separately) second class kail wood

Providing and fixing panelled or panelled and glazedshutters for doors,windows and clerestory windows including lSI marked M.S.pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,all complete as per direction of engineer- in charge. First class kail wood 35mm thick.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt· hinf!eS bright finished of required size with necessary screws. Second class kail wood 35 mm thick

Providing and fixing Ceramic gla.z:ed floor tiles 300x300mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT,SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) Crushed

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SOR 7.4 UV stablized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropytene random fitings 1/C fixing the pipe with clamps at 1.00m spacing. This includes testing of joints complete as per direction of Engineer-in-charge. (Internal work exposed on wall) all fitting complete. Pn-16 pipe, 25mm dia

32 mm dia

40 mm dia

Providing and placing on terrace (at all floor levels)polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base supportfor tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license] Complete job

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap,10 litre low level P.V. C.flushing cisterincluding flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making goodthe walls and floors wherever required.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 150 mm dia of approved quality

Providing and fixing PVC waste pipe all complete job. 100mm dia

50 mm dia

Providing and fixing PVC Bend of required degree .100 mm complete job

50 mm dia

providing and fixing of FTT PPR fitting of approved make

Providing and fixing of FT Elbow of approved make

Providing and fixing wash basin with C. I./M.S. brackets,15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and Fixing PTMT waste Coupling for wash basin and sink of approved quality and colour complete job.Waste coupling 31 mm of 79 mm length and 62 mm weighing not less than 45 gms

Providing and fixing Salem Stainless Steel A lSI 304 (18/8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink with drain board 510x1040mm bowl depth 250mm

providing and fixing CP jalli of approved make complete job.

Providing and fixing toilet paper holder C.P. brass

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 1500x450 mm

Providing and fixing PTMT towel rail complete withbrackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour:600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than190 gms.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and fixing gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.Raj Nager plain white marble/udhaypuri green marble/zebra black marble (Area of slab upto 0.5 sqm) 16mm thick

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighingnot less than 810 gms. 15 mm nominal bore.

Providing and fixing C.P brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore

Providing and fixing of bright finished Brass Tower bolt (Barrel type) with necessary screw etc.complete150 x 10 mm

Providing and fixing of bright finished Brass Handles with necessary screw etc.complete 100 mm

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/1 Osqm

Carriage of material by MT. a) Cement/Steel an avg. lead of 5 kms

b) Sand an average lead of 10 Kms

c) Stone aggregate an avg. lead of 5 kms

M/S TUNDUP ANGCHUK

M/S tsering samphel

M/S KONCHOK LOBZANG