Construction of 6 No. Type-II Quarter for Jail at Chamba (SH Construction of Building portion including WS and S.I. and Rain Harvesting System)

Amount

Cutting in earth work in all height and depth in all kinds of soils including saturated soil comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soil including dewatering wherever required, setting out true to the required lines, grades, width, cutting, side slopes, trimming of bottom and levels as shown in the drawings and as directed by the Engineer-in-charge at site, according to the HPPWD specification and sorting of useful and un-useful material for filling in roadway, embankments for grade improvement and leveling to the required grades and then disposing of all excavated materials in acquired width of the road or on approved dumping site/sites through all modes of transportation including head load, animal loads or mechanical means along with its leveling and fine dressing and carriage of all labour, machinery, materials, tools equipments and safety measures and other incidentals necessary to complete the work by mechanical means and /or by labour (if any required complete as per the direction of the Engineer-in-charge. Any loss to the public and private property during the course of execution and transportation of useful and un-useful materials shall be absolute responsibility of the contractor which shall have to be duly compensated by the contractor to full extent in all respect and in all cases including carriage of material with in all leads and lifts. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Excavation in earth work etcetra in all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, blasting work both in soft and hard rock, chiesling / wedging out of rock (Where blasting is prohibited) and their intermediate classification of soil setting out ture to the required lines, grade, width, cutting and trimming of side slopes as shown in the drawing and if water is met within the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable divertion pumping or bailing out and excavation shall be kept dry whereever so required by the contractor at his own cost as directed by the Engineer-in-charge and disposal of all surplus excavated soil in acquired width or at an approved dumping side including its stacking leveling dressing in all leads and lifts by head-load, mechanical transportation or by any other mode of transportation with all cost of labours, machinaries and other incidentals to complete the work as per HPPWD specification. Any loss to the public and private property during the course of execution and disposal of unserviceable material shall be absolute responsibility of the contractor which shall have to be compensated by him in all cases.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Excavation in foundation and trenches in all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rock, chiseling / wedging out of rock (Where blasting is prohibited) and their intermediate classification of soil setting out true to the required lines, grade, width, cutting and trimming of side slopes as shown in the drawing and if water is met within the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable diversion pumping or bailing out and excavation shall be kept dry wherever so required by the contractor at his own cost as directed by the Engineer-in-charge and disposal of all surplus excavated soil in acquired width or at an approved dumping side including its stacking leveling dressing including all leads and lifts by head-load, mechanical transportation or by any other mode of transportation with all cost of labours, machineries and other incidentals to complete the work as per HPPWD specification. Any loss to the public and private property during the course of execution and disposal of unserviceable material shall be absolute responsibility of the contractor which shall have to be compensated by him in all cases. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in foundation, footing, basis of columns etcetra and mass concrete including carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Columns, pillars, posts and struts square rectangular or polygonal in plan including carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights from floor including , carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetra upto any thickness including carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Stair cases with sloping or stepped soffits excluding landing including carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses, plinth and string courses and the like including carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for insitu-reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls upto all width and heights including all taxes, GST, including carriage of material and other incidentals within all leads and lifts and as per the direction of the Engineer-in-charge.

Providing and laying mechanically mixed and vibrated cement concrete work of grade M-20 (M-Twenty design mix) to obtain the minimum compressive strength of 20N/square MM (Twenty newton per square millimetre) with cement contents not less than 330 Kg/Per cubic metre ( Three hundred thirty kilograme per cubic metre) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundations, footings bases of columns and the like and mass concrete including carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and laying mechanically mixed & vibrated cement concrete work of grade M-20 (M-Twenty design mix) to obtain the minimum compressive strength of 20N/square MM (Twenty newton per square millimetre) with cement contents not less than 330 Kg/Per cubic metre ( Three hundred twenty kilograme per cubic metre) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts upto floor all levels as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and laying mechanically mixed & vibrated cement concrete work of grade M-20 (M-Twenty design mix) to obtain the minimum compressive strength of 20N/square MM (Twenty newton per square millimetre) with cement contents not less than 330 Kg/Per cubic metre ( Three hundred twenty kilograme per cubic metre) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landing, shelves and their support, balconies, beams, girders, bressumers and cantilever upto floor all levels as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm square (twenty newton per square millimetre) with cement contents not less than 330 Kg. (Three hundred twenty kilogramme) / Cubic metre and curing complete including form work chajjas upto any thickness and upto floor all level including finishing the exposed surfaces with cement mortor 1:3 ( One cement isto three sand) to give a smooth and even surface centering /form work and curing complet excluding the cost of reinforcement as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and laying mechanically mixed & vibrated cement concrete work of grade M-20 (M-Twenty design mix) to obtain the minimum compressive strength of 20N/square MM (Twenty newton per square millimetre) with cement contents not less than 330 Kg/Per cubic metre ( Three hundred twenty kilograme per cubic metre) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in stair cases and connected work upto floor all levels as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work of grade M-twenty design mix to obtain the minimum commpressive strength of 20 N /mm² (twenty newton per square millimetre ) cement contents of 330 Kg (three hundred ten kilogram) per cubic metre and curing complete excluding cost of form work and reinforcement for reinforced concrete work in walls ( any thickness but not less than 0.10 (zero point ten) Metre thickness) including attached pilasters buttersses, plinth and string courses etc. from top of foundation upto floor all levels including carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals as per HP:PWD specification .The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete work of grade M-20 (M-Twenty) graded crushed stone agreegate 20 mm (twenty millimetre) nominal size) curing complete excluding the cost of form work in foudation and plinth as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone agreegate 40 mm (forty millimetre) nominal size) and curing complete excluding the cost of form work in foudation and plinth including carriage of material, within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:6:12 (one cement isto six sand isto twelve graded crushed stone aggregate 40 mm (forty millimetre) nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth including carriage of material, within all leads and lifts within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing tor steel reinforcement for reinforced cement concrete work including straightening, bending, binding and placing in position complete as per the directions of the Engineer-in-charge including carriage of material, carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Random rubble masonry/polygonal rubble masonry (uncoursed / brought to courses ) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement isto six sand isto twelve graded stone agreegate 20mm (twenty millimetre) nominal size) at plinth level in cement mortar 1:6 (one cement isto six sand) as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Squared rubble masonry coursed with hard stones of approved quality in foundation and plinth including raking out joints in cement mortar 1:5 (one cement is to five sand) curing complete including all taxes and carriage of material, within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government

Stone filling dry hand packed tightly in floor complete including all taxes and carriage of material, as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including all taxes, carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing 100mm (one hundred millimeter) diametre PVC pipe Weep holes in brick masonry/stone masonry, plain/reinforced concrete abutments, wing walls return walls and retaining /breast walls etc., extending through the full width of the structure with slope of 1 (V) : 20 (H) (one vertical is to twenty horizontal ) towards draining face complete as per drawings and MORD technical specifications section 700 & 1200 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality ,Malkana, toll tax,GST or any other taxes imposed by the Government .

Second class brick work using common brunt clay building bricks of approved quality in super structure above plinth level upto floor all levels in cement mortar 1:6 (one cement isto six sand) curing complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Half brick masonry using second class common brunt building brick of approved quality in super structure above plinth level upto floor all levels in cement mortar 1:4 (one cement isto four sand) curing complete including and carriage of material, as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Second class brick work using common brunt clay building bricks in foundation, plinth in mud mortar including all taxes and carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing 40 mm (forty millimnetre) thick second class deodar wood panelled, glazed or panelled and glazed shutters for doors, windows, clerestory windows including black enamelled iron butt hinges with necessary screws within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Supplying and fixing 4 mm (Four millimetre )thick glass panes with putty and nails including removal of broken glass panes wherever necessary within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing to existing door frames, 30mm (thirty millimetre) thick factory made PVC panelled door shutter consisting of frame made out of M.S. tubes of 19 (ninteen) gauge thickness and size of 19mm x19mm (ninteen into ninteen millimetre) for styles and 15mmx15mm(fifteen into fifteen millimetre) for top and bottom rails, (code No. 9.128 of RAJSHRI )M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC "C" channel of size 30mm thickness, 70mm (seventy millimetre) width out of which 50mm( fifty millimetre) shall be flat and 20mm (twenty millimetre) shall be tappred in 45 (forty five millimetre) degree angle on either side forming style and 5mm(five millimetre) thick, 95mm (ninety five millimetre) wide, PVC sheet out of which 75mm (seventy five millimetre) shall be flat and 20mm (twenty millimetre) shall be tapered in 45 (forty five ) degree on the inner side to form top and bottom rail and 115mm (one hundred fifteen millimetre) wide PVC sheet out of which 75mm (seventy five millimetre) shall be flat and 20mm (twenty millimetre) shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm (ten millimetre) thick, 20mm (twenty millimetre) wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm (five millimetre) thick both side PVC Sheet to be fitted in the M.S. frame welded/sealed to the style and rails, joints mitred and jointed with solvent cement adhesive i/c fixing of PVC shutter with existing frame with M.S. butt hinges 100x50x1.90mm (one hundred into fifty into one point nine zero millimetre) size with necessary screws etc complete including all taxes and carriage of materials within all leads, liftsas per specification as per the direction of the Engineer-in-charge and other incidentals. within all leads, lifts as per the direction of the Engineer-in-charge and other incidentals.

Providing and fixing 40 mm (forty millimetre) thick second class deodar wood wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G(eighty five G) with wire of dia 0.56 mm (zero point five six millimetre) for doors, windows and clerestory windows including bright finished black enamelled iron hinges with necessary screws within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing aluminium composite panel ceiling 600 x 600 x 15 mm ( six hundred into six hundred into fifteen millimetre) including prepainted GI channel @ 600 mm C/C ( six hundred millimetre centre to centre) as per detail design, drawing and specification as per the direction of the engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimetre) bright finished Aluminium floor door stopper with rubber cushion screws etc. to suit shutter thickness complete as per the direction of the engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing 1st class deodar wood 12mm (twelve millimetre ) thick and 100 mm (one hundred millimetre) wide palmet with 25mm diameter wooden curtain rod and brackets including fixing with 25x3mm(twenty five into three millimetre ) M.S. flat 10 cm (ten centimetre ) long and plugs etc. complete as per the direction of the engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing bright finished hard drawn hooks and eyes as per the direction of the engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing 19mm (nineteen millimetre) thick commercial board water proof board of Uniply/Greenply/Kitply/Centuary ply including shelves and 6 mm ( six millimetre) thick ply both side of cupboard. All cut portion of shutter shall have 6 mm ( six millimetre) thick hard wood edging. The shutter from out side shall to be finished with 1 mm (one millimetre) thick lamination of Centuary ply/Greenply/ Action Tesa i/c fixing with nickel plated piano hinges with screws etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etcetra complete 300 X 16 mm ( three hundred into sixteen millimetre) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete 200 X 10 mm (two hundred into ten millimetre) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete 150 X 10 mm (one hundred fifty into ten millimetre) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete 125 mm (one hundred twenty five millimetre) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing bright finished or / and black enamelled iron Helical door spring 150mm (one hundred fifty millimetre) within all leads and lifts as per the direction of Engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing M.S. plain grills of required pattern in wooden frames of windows etc.with M.S.Flats, square or round bars with round headed bolts and nuts or by screws within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and laying vitrified floor tiles double charged size of 600 x 600 mm ( six hundred into six hundred millimetre) of Kazaria/ Somany/ jonhson/Orient-Bell in flooring (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm ( twenty millimetre) thick cement mortar 1:4 ( one cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three point three kilogram/ per square metre) including grouting the joints with white cement and matching pigments etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing non slippery Ceramic floor tiles of Kazaria/ Somany/ jonhson/Orient-Bell of size 300x300 mm ( three hundred into three hundred ) (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm ( twenty millimetre) thick bed of cement mortar 1:4 (one Cement isto four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three point three kilogram/ per square metre) including pointing the joints with white cement and matching pigments etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying 25mm (twenty five millimetre) thick kota stone single slab with round nosing in flooring, treads of steps 20mm (twenty millimetre) (average) thick base of cement mortar 1:4 (one cement isto four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of kota stone including rubbing and polishisng complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying Vitrified tiles in skirting of Kazaria/ Somany/ jonhson/Orient-Bell in flooring (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm ( twenty millimetre) thick cement mortar 1:4 ( one cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three point three kilogram/ per square metre) including grouting the joints with white cement and matching pigments etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying 20mm (twenty millimetre) thick green Baroda round nosing marble work (table rubbed and polished ) in flooring on 20mm (twenty millimetre) thick cement mortar 1:3 (one cement is to three sand) including jointing with cement mortar (one cement isto two marble dust) with an admixture of pigment to match the shade of the marble including all taxes, carriage of material within all leads and lifts and as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

White glazed tiles 6mm (six millimetre) thick in skiriting or risers of steps and dado on 12mm (twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) finished with flush pointing in white cement as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a primming coat of red lead paint in trusses and trussed purlins in building including carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing steel door, windows, ventilaters and clerestory windows frame manufactured from M.S. channal 75x40mm (Seventy five into forty millimetre), size vertically welded with M.S. flat 75 X 4mm (Seventy five into four millimetre) for central frames with split to end tail to each jambs including joints and miterd and welded with 16 X 3.15mm (Sixteen into three point five millimetre) lugs 10cm (ten centimetre) long embedded in cement concrete block 15cm X 10cm X 10cm (Fifteen centimetre into ten centimetre into ten centimetre) size of 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate twenty millimetre nominal size) with provision for locking arragnement and shock observor fixed with by mechanical means lugs and curing complete including applying a coat of approved steel primer after pretreatment of the surface as specified within all leads and lifts as per the direction of Engineer-in-Charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing factory made PVC door frame single rebate of any clours of size 50x47mm (fifty into forty seven millimetre) with a wall thickness of 5mm (five millimetre) made out of extruded 5mm(five millimetre) rigid PVC foam sheet heat bend and mitred at corners and jointed with 2 Nos. (two numbers) of 150mm (one hundred fifty millimetre) long brackets of 15mmx15mm (fifteen into fifteen millimetre) M.S. square tube, the vertical door profiles to be reinforced with 19mmx19mm (ninteen into ninteen millimetre) M.S. square tube of 19 (ninteen) gauge of RAJSHRI ( code No. 16.24) EPDM rubber gasket weather seal to be provided throughout the frame including fixing of door frame to wall with M.S. screws 100 (one hundred) long with wooden or rawl plugs emedded in masonry complete as per manufactures specification including all taxes and carriage of materials within all leads and lifts and as per specification or as per the direction of the engineer-in-chief and other incidentals.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing 0.60mm (zero point six zero millimetre) thick prepainted steel sheets roofing made of cold rolled steel roll with spray coating of 25 micron with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron (twenty micron) over 5 microns (five micron) primer coating and back coat of polyster of 5 microns (five micron) over 5 microns (five micron) primer coating of TATA durashine including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet washers complete with all accesories as required including carriage of material within all leads and lifts and as per specification or as per the direction of the engineer-in-chief and other incidentals.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing ridges or hips 60cm (sixty centimetre) overall 0.60mm (zero point six zero millimetre) thick prepainted steel sheets in roofing having proper gola shape with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron (twenty micron) over 5 microns (five microns) primer coating and back coat of polyster of 5 microns (five microns) over 5 microns (five microns) primer coating of TATA durashine including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet washers complete with all accesories as required including all taxes, carriage of material within all leads and lifts and as per specification or as per the direction of the engineer-in-chief and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing valley 90 cm. (ninety centimetre) overall with 0.60mm (zero decimal six millimetre) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron over 5 micron primer coating and back coat of poltster of 5 micron over 5 micron primer coating of TATA durashine i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia and prepainted G.I. limpet and bitumen washers complete with all accessories including carriage of material within all leads and lifts and as per specification or as per the direction of the engineer-in-chief and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing M.S. B.P. sheet 1.66mm (one point six six millimetre) any thickness in eaves board / facia / soffits / ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per specification including carriage of material within all leads and lifts and as per the direction of the engineer-in-chief and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing 15cm (fifteen centimetre) wide 45cm (forty five centimetre) overall semicircular plain 0.63mm (zero point six three millimetre) thick G.I. sheet gutter with iron brackets 40x3mm (forty into three millimetre) size bolts and nuts and washers etcetera including making necessary conections with rain water pipe complete as per design including all taxes, carriage of material within all leads and lifts and as per specification or as per the direction of the engineer-in-chief and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a primming coat of red lead paint in gratings framed gaurd bars, ladders, railing, brackets and similar works as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing on wall faces PVC (D-plast) 100mm dia (one hundred millimetre diametre) rain water pipes working pressure not less than 4.5 Kg (four point five) kilogram per square metre including filling the joints with approved adhesive complete within all leads and lifts and as per the direction of the Engineer-in-Charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing on wall faces PVC (D-plast) 100mm (one hundred millimetre) dia PVC plain bend for rain water pipes including filling the joints with approved adhesive complete within all leads and lifts and as per the direction of the Engineer-in-Charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter with Readymixed paint brushing wood primer pink as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Painting two coats (excluding priming coat ) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stoping with enamel paint other than white as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Painting two coat (excluding priming coat) on new steel and other metal surfaces under coat with ready mixed paint brushing to give an even shade including cleaning the surface all dirt, dust and other foreign matter With white readymixed paint within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

6mm (six millimetre) thick cement plaster to ceiling in cement mortar 1:3 ( one cement isto six sand) as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

15mm (fifteen millimetre) cement plaster in single coat on rough side of brick / concrete / stone masonry for interior plastering upto floor all levels including arises, internal rounded angle, chamfer and / or rounded angle not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement isto six sand) as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

15mm (fifteen millimetre) thick cement plaster in single coat on fair side of brick / concrete / stone walls for interior plastering upto floor all levels including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth with cement mortar 1:6 (one cement isto six sand)as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

15mm (fifteen millimetre) thick cement plaster in single coat on brick / concrete / stone walls for interior plastering upto floor all levels including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth with cement mortar 1:3 (one cement isto three sand)as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Distempering two coats with oil bound washable distemper of Asian / Nerolac approved brand and manufacture and of required shade on un-decorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and including preparing the surface even and sand papered smooth as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Finishing walls with weather proof exterior grade emulsion of approved design (Apexultima) or its equivalent on undecorated wall surface (two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etc. including sand paper smooth complete as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Applying Birla white wall care putty over plastered surface after thoroughly brushing the surface free from mortar drops, dust loose materials and other foreign matter sand papered smooth to give final matter finish to the surface complete as per the directions of the Engineer-in-charge including all taxes ,GST , carriage of material within all leads and lifts and other incidentals.

Providing under layer for plinth protection of 75 mm (seventy five millimetre) thick (unconsolidated) bed of dry brick / stone agreegate 40 mm (forty millimetre) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing plinth protection 50 mm (fifty millimetre) thick in cement concrete 1:3:6 (one cement isto three sand isto six graded stone agreegate 20 mm(twenty millimetre) nominal size) within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing water proofing treatment shall be done in two coats apply first coat of Dr. Fixit torch shield (P-3160-3mm ) to the clean and saturated surface maintaining a coverage 0.60 sqm. (point six zero square meter per kilogram to achieve 1 mm (one millimeter ) thickness coating shall also be executed opposite direction after 4 to 6 hours of application o first coat then sprinkle sand on top surface of applied Dr. Fixit cement mortar 1:4(one cement :four sand ) mixed with pidi proof laid at the rate 200 ml (two hundred millimeter ) per kilogram of cement over the floor with suitable gradient to words drain water pipe while the second coat of Dr. Fixit is shall taking complete as per approved drawing design including preparing the surface even and sand papered smooth as per the directions of the Engineer-in-charge including all taxes ,GST, carriage of material within all leads and lifts and other incidentals.

Constructing course rubble hammer dressed 'U' shape open surface drain with side wall 15 X 23 cm (fifteen into twenty three centimetre) in cement mortar 1:6 (one cement isto six sand) and inside plastering with cement mortar 1:3 (one cement isto three sand) including earth work and laying 10 cm (ten centimetre) cement concrete in 1:5:10 (one cement isto five sand isto ten graded stone agreegate 40 mm (foty millimetre) nominal size) and 7.5 cm (seven point five centimetre) cement concrete 1:2:4 (one cement isto two sand isto four graded stone agreegate 20 mm (twenty millimetre) nominal size) and finished with a floating coat of neat cement complete as per standard design within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing to wall, ceiling and floor galvanised mild steel tubes (medium grade) tube fittings and clamps including making good the wall, ceiling and floor 15 mm (fifteen millimetre) nominal bore including carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and laying in trenches galvanised mild steel tubes (medium grade) tube fittings (Earth work in trenches to be measured and paid for separately) 15 mm (fifteen millimetre) nominal bore including all taxes, carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Making connection of galvanised steel distribution branch with galvanised mild steel main 20 mm to 40 mm (twenty millimetre to forty millimetre) nominal bore by providing and fixing tee including cutting and threading the pipes complete including all taxes, carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and placing in position 1000 (one thousand) litres net capacity PVC water storage tank of sintex ISI 12701 marked G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangment including hoisting upto all heights above ground level.as per the directions of the Engineer-in-charge including all taxes carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and placing in position 500 (five hundred ) litres net capacity PVC water storage tank of sintex ISI 12701 marked G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangment including hoisting upto all heights above ground level.as per the directions of the Engineer-in-charge including all taxes carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket of supreme make , waste and ventilating pipes ISI marked including fixing with approved adhesive 150 mm (one hundred fifty millimetre) dia as per the directions of the Engineer-in-charge including all taxes carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket of supreme make , waste and ventilating pipes ISI marked including fixing with approved adhesive 110 mm (one hundred ten millimetre) dia as per the directions of the Engineer-in-charge including all taxes carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing PVC 110x90mm (one hundred ten into ninety millimetre) dia floor trap ISI Marked of self cleaning design including fixing with approved adhsive, cost of cutting making the walls and floors etc. complete including all taxes, carriage of material within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive 150 mm (one hundred fifty millimetre) dia as per the directions of the Engineer-in-charge including all taxes, carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive 110 mm (one hundred ten millimetre) dia as per the directions of the Engineer-in-charge including all taxes, carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and Fixing PVC cowl 150 mm (one hundred fifty millimetre) nominal diametre as per the directions of the Engineer-in-charge includingall taxes, carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and laying PVC plain bend of ISI marked including fixing with approved adhesive etc. complete 150 mm (one hundred fifty millimetre) dia as per the directions of the Engineer-in-charge includingall taxes, carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and laying PVC plain bend of ISI marked including fixing with approved adhesive etc. complete 110 mm (one hundred ten millimetre) dia as per the directions of the Engineer-in-charge includingall taxes, carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and Fixing PVC collar 150 mm (one hundred fifty millimetre) as per the directions of the Engineer-in-charge includingall taxes, carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing vitreous China water closet squatting pan (Indian type W.C. pan) ( earth work, bed concrete, foot rest and trap to be measured and paid for separately). Orrisa pattern No. 2004 of size 58x40 cm. of hindware / Cera in white shade as per specification or as per the directions of the Engineer-in-charge including all taxes, carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing PVC P or S trap for water closet (squatting pan ) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete 150mm (one hundred fifty millimetre) dia as per the directions of the Engineer-in-charge including all taxes, carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing PTMT coloured/ white high density polythene / poly prolylene 10 litre (ten litre) capacity low level P.V.C. cistern plus) flushing cistern with a pair of C.I. or M.S. brackets complete with fitting such as lead valve syphon, 15mm (fifteen millimetre) dia PVC wall valve , coupling for connection with inlet, outlet and overflow pipes 40mm (forty millimetre) dia C.P. flush bend including cutting holes and making good the same (overflow pipe to be measured and paid for separately) as per specification as per the directions of the Engineer-in-charge including all taxes, carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing vitreous China wash basin of Hindware with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings Flat back 630mm X 450 mm (six hundred thirty millimetre into four hundred fifty millimetre) as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing vitreous China pedestal for wash basin complete recessed at the back for wash basin complete recessed at the back for the reception of pipes and fittings.as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing C.P. brass waste of 32mm (thirty two millimetre) dia size for sink or wash basin.as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing 600mm X 450 mm (six hundred millimetre into four hundred fifty millimetre) bevelled edge mirror of superior glass mounted on 6mm (six millimetre)thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers.as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing 600mm X 20mm (six hundred millimetre into twenty millimetre) C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing charomium plated brass soap dish of ISI marked Jal with C.P. brass brackets fixed to wooden cleats with C.P. brass screws as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing C.P. brass bib tap with capstan head of ISI marked Jal 15 mm (fifteen millimetre) dia with capaston head as per the directions of the Engineer-in-charge including all taxes, carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing brass full way valve with wheel 15mm (fifteen millimetre) nominal bore as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing C.P. brass pillar tap with capstan head of ISI marked Jal 15mm (fifteen millimetre) dia.as per the directions of the Engineer-in-charge including all taxes, carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing wall mixing faucet for shower and bath with over head pipe ( 1210cm) (One thousand two hundred ten centimetre) and bath shower as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing C.P. brass angle valve 15mm (fifteen millimetre) dia.as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing PVC connection with brass union 45cm. (forty five centimetre) Long and 15mm (fifteen millimetre) dia as per the directions of the Engineer-in-charge including all taxes, carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing in position water lifting pump (toollu pump) having 1.00 (one) horse power capacity of Kirloskar or equivilent make ISI mark including all necessary fitting required at site complee in all respect including carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals .The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing 200 mm (two hundred millimetre) wide cast ridge rungs with chequred or rubber non slip surface including fixing in man hole with 200 X 200 X 100 mm (two hundred into two hundred into one hundred millimetre) cement concrete 1:3:6 (one cement isto three sand isto six graded crushed stone aggreegate 20 mm (twenty millimetre) nominal size including all taxes. carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Supplying and fixing of cast iron medium duty 500mm dia (five hundred millimetre) cast iron cover with frame complete being not less than 58 kg. (fifty eight kilograme) including all taxes, carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Construting manhole with RCC top slab in 1:2:4 ( one cement isto two sand isto four graded stone aggregate) 20mm (twenty millimetre nominal size) ,foudnation concrete 1:4:8 (one cement isto four sand isto eight graded stone aggregate 40mm (forty millimetre nominal size) in side plastering 15mm (fifteen milliemtre) thick with cement mortar 1:3 (one cement isto three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (one cement isto two sand isto four grade stone aggregate 20mm (twenty millimetre)nominal size finished smooth complete including curing and testing having inside size 800mmx800mm (eight hundred millimeter into eight hundred millimeter) and 500mm (five hundred millimetre) deep including C.I. cover with frame (light duty single seal pattern one) 455mm x610mm (four hunded fifty five millimetre into six hundred ten millimetre) internal dimension total weight of cover and frame to be not less than 38 kg (thirty eight kilogram )weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg (fifteen kilogram) with 23cm. thick brick wall of approved quality in cement mortar 1:3 (one cement isto three sand) as per the directions of the Engineer-in-charge including all taxes, carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Sarwar Shah